Fix Linux/Wayland crash on Preview tab at startup

localization/i18n/it/OrcaSlicer_it.po

@@ -17664,10 +17664,9 @@ msgid ""
 "Apply scarf joints only to smooth perimeters where traditional seams do not "
 "conceal the seams at sharp corners effectively."
 msgstr ""
-"Applica le cuciture a sciarpa solo sui perimetri lisci e curvi, dove le "
+"Applica le cuciture a sciarpa solo sui perimetri lisci, dove le cuciture "
-"cuciture tradizionali risulterebbero molto evidenti. Gli angoli netti "
+"tradizionali non riescono a nascondere efficacemente quelle in "
-"continueranno a utilizzare le cuciture normali per mantenere la precisione "
+"corrispondenza degli angoli vivi."
-"dimensionale."
 
 msgid "Conditional angle threshold"
 msgstr "Soglia angolo condizionale"
@@ -17735,48 +17734,45 @@ msgstr ""
 "cucitura a sciarpa."
 
 msgid "Scarf start height"
-msgstr "Altezza iniziale cucitura a sciarpa"
+msgstr "Altezza iniziale sciarpa"
 
 msgid ""
 "Start height of the scarf.\n"
 "This amount can be specified in millimeters or as a percentage of the "
 "current layer height. The default value for this parameter is 0."
 msgstr ""
-"Altezza iniziale della cucitura a sciarpa.\n"
+"Altezza iniziale della sciarpa.\n"
-"Questo valore può essere specificato in millimetri o come percentuale "
+"Questa quantità può essere specificata in millimetri o come percentuale "
 "dell'altezza dello strato corrente. Il valore predefinito per questo "
 "parametro è 0."
 
 msgid "Scarf around entire wall"
-msgstr "Cucitura a sciarpa su intera parete"
+msgstr "Sciarpa attorno all'intera parete"
 
 msgid "The scarf extends to the entire length of the wall."
-msgstr ""
+msgstr "La sciarpa si estende per tutta la lunghezza della parete."
-"La cucitura a sciarpa si estende lungo tutto il perimetro della parete."
 
 msgid "Scarf length"
-msgstr "Lunghezza cucitura a sciarpa"
+msgstr "Lunghezza sciarpa"
 
 msgid ""
 "Length of the scarf. Setting this parameter to zero effectively disables the "
 "scarf."
 msgstr ""
-"Lunghezza della cucitura a sciarpa. Impostando questo parametro su zero, la "
+"Lunghezza della sciarpa. Impostando questo parametro su zero, la sciarpa "
-"cucitura a sciarpa viene disabilitata."
+"viene effettivamente disabilitata."
 
 msgid "Scarf steps"
-msgstr "Incrementi cucitura a sciarpa"
+msgstr "Incrementi sciarpa"
 
 msgid "Minimum number of segments of each scarf."
-msgstr ""
+msgstr "Numero minimo di segmenti di ogni sciarpa."
-"Numero minimo di segmenti utilizzati per la creazione della sfumatura della "
-"cucitura a sciarpa."
 
 msgid "Scarf joint for inner walls"
 msgstr "Cucitura a sciarpa per pareti interne"
 
 msgid "Use scarf joint for inner walls as well."
-msgstr "Utilizza la cucitura a sciarpa anche per le pareti interne."
+msgstr "Utilizzare la cucitura a sciarpa anche per le pareti interne."
 
 msgid "Role base wipe speed"
 msgstr "Velocità di spurgo basata su ruolo"

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -30,6 +30,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.2 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.2 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.4 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.6 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.8 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.2 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.2 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.4 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.6 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.8 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG.json

@@ -48,6 +48,12 @@
 	"pressure_advance": [
 		"0.04"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
 	"filament_density": [
 		"1.24"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -30,6 +30,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.2 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.2 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.4 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.6 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.8 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.2 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.2 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.4 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.6 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.8 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi.json

@@ -48,6 +48,12 @@
 	"pressure_advance": [
 		"0.04"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
 	"filament_density": [
 		"1.24"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -21,6 +21,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -21,6 +21,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -21,6 +21,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -21,6 +21,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Q2/Bambu ABS @Q2.json

@@ -72,35 +72,5 @@
 	"hot_plate_temp": [
 		"90"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"80"
-	],
-	"eng_plate_temp": [
-		"90"
-	],
-	"supertack_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_cool_plate_temp": [
-		"80"
-	],
-	"cool_plate_temp_initial_layer": [
-		"80"
-	],
-	"eng_plate_temp_initial_layer": [
-		"90"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"80"
-	]
 }

resources/profiles/Qidi/filament/Q2/Bambu ABS @Q2C.json

@@ -72,35 +72,5 @@
 	"hot_plate_temp": [
 		"90"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"80"
-	],
-	"eng_plate_temp": [
-		"90"
-	],
-	"supertack_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_cool_plate_temp": [
-		"80"
-	],
-	"cool_plate_temp_initial_layer": [
-		"80"
-	],
-	"eng_plate_temp_initial_layer": [
-		"90"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"80"
-	]
 }

resources/profiles/Qidi/filament/Q2/Bambu PETG @Q2.json

@@ -61,10 +61,10 @@
 		"8"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"60"
+		"70"
 	],
 	"supertack_plate_temp": [
-		"60"
+		"70"
 	],
 	"temperature_vitrification": [
 		"70"
@@ -75,29 +75,5 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_cool_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"60"
-	]
 }

resources/profiles/Qidi/filament/Q2/Bambu PETG @Q2C.json

@@ -61,10 +61,10 @@
 		"8"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"60"
+		"70"
 	],
 	"supertack_plate_temp": [
-		"60"
+		"70"
 	],
 	"temperature_vitrification": [
 		"70"
@@ -75,29 +75,5 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_cool_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"60"
-	]
 }

resources/profiles/Qidi/filament/Q2/Bambu PLA @Q2.json

@@ -42,35 +42,5 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_cool_plate_temp": [
-		"45"
-	],
-	"cool_plate_temp_initial_layer": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"45"
-	]
 }

resources/profiles/Qidi/filament/Q2/Bambu PLA @Q2C.json

@@ -42,35 +42,5 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_cool_plate_temp": [
-		"45"
-	],
-	"cool_plate_temp_initial_layer": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"45"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic ABS @Q2.json

@@ -75,35 +75,5 @@
 	"hot_plate_temp": [
 		"90"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"80"
-	],
-	"eng_plate_temp": [
-		"90"
-	],
-	"supertack_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_cool_plate_temp": [
-		"80"
-	],
-	"cool_plate_temp_initial_layer": [
-		"80"
-	],
-	"eng_plate_temp_initial_layer": [
-		"90"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"80"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic ABS @Q2C.json

@@ -75,35 +75,5 @@
 	"hot_plate_temp": [
 		"90"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"80"
-	],
-	"eng_plate_temp": [
-		"90"
-	],
-	"supertack_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_cool_plate_temp": [
-		"80"
-	],
-	"cool_plate_temp_initial_layer": [
-		"80"
-	],
-	"eng_plate_temp_initial_layer": [
-		"90"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"80"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic PETG @Q2.json

@@ -64,10 +64,10 @@
 		"12"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"60"
+		"70"
 	],
 	"supertack_plate_temp": [
-		"60"
+		"70"
 	],
 	"temperature_vitrification": [
 		"70"
@@ -78,29 +78,5 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_cool_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"60"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic PETG @Q2C.json

@@ -64,10 +64,10 @@
 		"12"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"60"
+		"70"
 	],
 	"supertack_plate_temp": [
-		"60"
+		"70"
 	],
 	"temperature_vitrification": [
 		"70"
@@ -78,29 +78,5 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_cool_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"60"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic PLA @Q2.json

@@ -54,29 +54,5 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"eng_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_cool_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"45"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic PLA @Q2C.json

@@ -54,29 +54,5 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"eng_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_cool_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"45"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic PLA Silk @Q2.json

@@ -46,10 +46,10 @@
 		"0.032"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"45"
+		"35"
 	],
 	"supertack_plate_temp": [
-		"45"
+		"35"
 	],
 	"temperature_vitrification": [
 		"45"
@@ -60,29 +60,5 @@
 	"hot_plate_temp": [
 		"55"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp": [
-		"55"
-	],
-	"textured_plate_temp": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"45"
-	],
-	"cool_plate_temp_initial_layer": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"55"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"45"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic PLA Silk @Q2C.json

@@ -46,10 +46,10 @@
 		"0.032"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"45"
+		"35"
 	],
 	"supertack_plate_temp": [
-		"45"
+		"35"
 	],
 	"temperature_vitrification": [
 		"45"
@@ -60,29 +60,5 @@
 	"hot_plate_temp": [
 		"55"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp": [
-		"55"
-	],
-	"textured_plate_temp": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"45"
-	],
-	"cool_plate_temp_initial_layer": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"55"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"45"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic PLA+ @Q2.json

@@ -48,35 +48,5 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_cool_plate_temp": [
-		"45"
-	],
-	"cool_plate_temp_initial_layer": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"45"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic PLA+ @Q2C.json

@@ -48,35 +48,5 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_cool_plate_temp": [
-		"45"
-	],
-	"cool_plate_temp_initial_layer": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"45"
-	]
 }

resources/profiles/Qidi/filament/Q2/Generic TPU 95A @Q2.json

@@ -48,35 +48,5 @@
 	"hot_plate_temp": [
 		"35"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"30"
-	],
-	"eng_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp": [
-		"30"
-	],
-	"textured_plate_temp": [
-		"35"
-	],
-	"textured_cool_plate_temp": [
-		"30"
-	],
-	"cool_plate_temp_initial_layer": [
-		"30"
-	],
-	"eng_plate_temp_initial_layer": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"30"
-	],
-	"textured_plate_temp_initial_layer": [
-		"35"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"30"
-	]
 }