follow up updates

Co-authored-by: VittC <58783944+VittC@users.noreply.github.com>

.idea/.gitignore

@@ -0,0 +1,8 @@
+# Default ignored files
+/shelf/
+/workspace.xml
+# Editor-based HTTP Client requests
+/httpRequests/
+# Datasource local storage ignored files
+/dataSources/
+/dataSources.local.xml

.idea/OrcaSlicer.iml

@@ -0,0 +1,2 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<module classpath="CMake" type="CPP_MODULE" version="4" />

.idea/codeStyles/Project.xml

@@ -0,0 +1,7 @@
+<component name="ProjectCodeStyleConfiguration">
+  <code_scheme name="Project" version="173">
+    <clangFormatSettings>
+      <option name="ENABLED" value="true" />
+    </clangFormatSettings>
+  </code_scheme>
+</component>

.idea/codeStyles/codeStyleConfig.xml

@@ -0,0 +1,5 @@
+<component name="ProjectCodeStyleConfiguration">
+  <state>
+    <option name="USE_PER_PROJECT_SETTINGS" value="true" />
+  </state>
+</component>

.idea/misc.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
+</project>

.idea/modules.xml

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="ProjectModuleManager">
+    <modules>
+      <module fileurl="file://$PROJECT_DIR$/.idea/OrcaSlicer.iml" filepath="$PROJECT_DIR$/.idea/OrcaSlicer.iml" />
+    </modules>
+  </component>
+</project>

.idea/vcs.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="VcsDirectoryMappings">
+    <mapping directory="" vcs="Git" />
+  </component>
+</project>

localization/i18n/it/OrcaSlicer_it.po

@@ -17664,10 +17664,9 @@ msgid ""
 "Apply scarf joints only to smooth perimeters where traditional seams do not "
 "conceal the seams at sharp corners effectively."
 msgstr ""
-"Applica le cuciture a sciarpa solo sui perimetri lisci e curvi, dove le "
+"Applica le cuciture a sciarpa solo sui perimetri lisci, dove le cuciture "
-"cuciture tradizionali risulterebbero molto evidenti. Gli angoli netti "
+"tradizionali non riescono a nascondere efficacemente quelle in "
-"continueranno a utilizzare le cuciture normali per mantenere la precisione "
+"corrispondenza degli angoli vivi."
-"dimensionale."
 
 msgid "Conditional angle threshold"
 msgstr "Soglia angolo condizionale"
@@ -17735,48 +17734,45 @@ msgstr ""
 "cucitura a sciarpa."
 
 msgid "Scarf start height"
-msgstr "Altezza iniziale cucitura a sciarpa"
+msgstr "Altezza iniziale sciarpa"
 
 msgid ""
 "Start height of the scarf.\n"
 "This amount can be specified in millimeters or as a percentage of the "
 "current layer height. The default value for this parameter is 0."
 msgstr ""
-"Altezza iniziale della cucitura a sciarpa.\n"
+"Altezza iniziale della sciarpa.\n"
-"Questo valore può essere specificato in millimetri o come percentuale "
+"Questa quantità può essere specificata in millimetri o come percentuale "
 "dell'altezza dello strato corrente. Il valore predefinito per questo "
 "parametro è 0."
 
 msgid "Scarf around entire wall"
-msgstr "Cucitura a sciarpa su intera parete"
+msgstr "Sciarpa attorno all'intera parete"
 
 msgid "The scarf extends to the entire length of the wall."
-msgstr ""
+msgstr "La sciarpa si estende per tutta la lunghezza della parete."
-"La cucitura a sciarpa si estende lungo tutto il perimetro della parete."
 
 msgid "Scarf length"
-msgstr "Lunghezza cucitura a sciarpa"
+msgstr "Lunghezza sciarpa"
 
 msgid ""
 "Length of the scarf. Setting this parameter to zero effectively disables the "
 "scarf."
 msgstr ""
-"Lunghezza della cucitura a sciarpa. Impostando questo parametro su zero, la "
+"Lunghezza della sciarpa. Impostando questo parametro su zero, la sciarpa "
-"cucitura a sciarpa viene disabilitata."
+"viene effettivamente disabilitata."
 
 msgid "Scarf steps"
-msgstr "Incrementi cucitura a sciarpa"
+msgstr "Incrementi sciarpa"
 
 msgid "Minimum number of segments of each scarf."
-msgstr ""
+msgstr "Numero minimo di segmenti di ogni sciarpa."
-"Numero minimo di segmenti utilizzati per la creazione della sfumatura della "
-"cucitura a sciarpa."
 
 msgid "Scarf joint for inner walls"
 msgstr "Cucitura a sciarpa per pareti interne"
 
 msgid "Use scarf joint for inner walls as well."
-msgstr "Utilizza la cucitura a sciarpa anche per le pareti interne."
+msgstr "Utilizzare la cucitura a sciarpa anche per le pareti interne."
 
 msgid "Role base wipe speed"
 msgstr "Velocità di spurgo basata su ruolo"

resources/data/hints.ini

@@ -94,8 +94,8 @@ text = Switch workspaces\nYou can switch between <b>Prepare</b> and <b>Preview</
 [hint:How to use keyboard shortcuts]
 text = How to use keyboard shortcuts\nDid you know that Orca Slicer offers a wide range of keyboard shortcuts and 3D scene operations?
 
-[hint:Reverse on even]
+[hint:Reverse on odd]
-text = Reverse on even\nDid you know that <b>Reverse on even</b> feature can significantly improve the surface quality of your overhangs? However, it can cause wall inconsistencies so use carefully!
+text = Reverse on odd\nDid you know that <b>Reverse on odd</b> feature can significantly improve the surface quality of your overhangs?
 
 [hint:Cut Tool]
 text = Cut Tool\nDid you know that you can cut a model at any angle and position with the cutting tool?

resources/profiles/Anet/machine/Anet A8 Plus 0.4 nozzle.json

@@ -0,0 +1,237 @@
+{
+	"type": "machine",
+	"name": "Anet A8 Plus 0.4 nozzle",
+	"inherits": "",
+	"from": "User",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "M600",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"default_bed_type": "",
+	"default_filament_profile": [
+		"Anycubic Generic PLA"
+	],
+	"default_print_profile": "0.20mm Standard @Anycubic 4MaxPro2",
+	"deretraction_speed": [
+		"25"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "1",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "140",
+	"extruder_clearance_height_to_rod": "36",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"#018001"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M104 S0 ; turn off extruder heating\nM140 S0 ; turn off bed heating\nM107 ; turn off fans\nG91 ; relative positioning\nG0 Z+0.5 ; move Z up a tiny bit\nG90 ; absolute positioning\nG0 X135 Y105 F{machine_max_speed_x[0]*60} ; move extruder to center position\nG0 Z190.5 F{machine_max_speed_z[0]*60} ; lower the plattform to Z min\nM84 ; steppers off\nG90 ; absolute positioning\n",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"1250",
+		"1250"
+	],
+	"machine_max_acceleration_retracting": [
+		"1250",
+		"1250"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"1500"
+	],
+	"machine_max_acceleration_x": [
+		"1000",
+		"900"
+	],
+	"machine_max_acceleration_y": [
+		"1000",
+		"900"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"100"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"6",
+		"6"
+	],
+	"machine_max_jerk_y": [
+		"6",
+		"6"
+	],
+	"machine_max_jerk_z": [
+		"0.2",
+		"0.2"
+	],
+	"machine_max_junction_deviation": [
+		"0.10",
+		"0"
+	],
+	"machine_max_speed_e": [
+		"120",
+		"120"
+	],
+	"machine_max_speed_x": [
+		"200",
+		"200"
+	],
+	"machine_max_speed_y": [
+		"200",
+		"200"
+	],
+	"machine_max_speed_z": [
+		"64",
+		"16"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": "G21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 X0 Y0 ; home X and Y\nG28 Z0 ; home Z\nG1 Z30 F{machine_max_speed_z[0]*60} ; move Z a bit down to not blow on the bed edge while heating\nG1 X10 F3900 ; let some space on x to prevent the filament cooling exhaust from beeing blocked by the servo motor\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM106 S80 ; turn on fan to prevent air nozzle melt while heating up\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM107 ; start with the fan off\nG28 X0 ; goto X home again\nG92 E0 ; zero the extruded length\nG1 Z0.2 F360 ; move plattform upwards\n; extrude material next to the plattform (comment or remove following lines to disable)\nG1 F180 E20 ; extrude some material next to the plattform\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG92 E0 ; zero the extruded length again\nG1 X5 F3900 ; move sideways to get rid of that string\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\nG92 E0 ; zero the extruded length again\n; draw intro line (comment or remove following lines to disable)\nG1 X30 E5 F700 ; draw intro line\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG1 X40 Z2.0 ; move away from the introline\nG92 E0 ; zero the extruded length again\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\n; end of intro line code\nM117 Printing...\nG5",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.3"
+	],
+	"max_resonance_avoidance_speed": "120",
+	"min_layer_height": [
+		"0.07"
+	],
+	"min_resonance_avoidance_speed": "70",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"nozzle_height": "2.5",
+	"nozzle_hrc": "0",
+	"nozzle_type": "undefine",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printable_area": [
+		"0x0",
+		"300x0",
+		"300x300",
+		"0x300"
+	],
+	"printable_height": "350",
+	"printer_model": "Anet A8 Plus",
+	"printer_notes": "",
+	"printer_settings_id": "Anet A8 Plus 0.4 nozzle",
+	"printer_structure": "undefine",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "1",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"10"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"2.5"
+	],
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retraction_speed": [
+		"35"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG,300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Normal Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -30,6 +30,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.2 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.2 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.4 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.6 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.8 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.2 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.2 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.4 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.6 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.8 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/Bambu PETG.json

@@ -48,6 +48,12 @@
 	"pressure_advance": [
 		"0.04"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
 	"filament_density": [
 		"1.24"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -30,6 +30,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"260"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.2 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.2 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.4 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.6 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.8 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.2 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.2 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.4 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.6 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.8 nozzle"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
 	"overhang_fan_speed": [
 		"90"
 	],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi.json

@@ -48,6 +48,12 @@
 	"pressure_advance": [
 		"0.04"
 	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
 	"filament_density": [
 		"1.24"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -21,6 +21,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -21,6 +21,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -21,6 +21,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"250"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -21,6 +21,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -18,6 +18,9 @@
 	"fan_max_speed": [
 		"80"
 	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
 	"nozzle_temperature": [
 		"255"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -30,6 +30,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -27,6 +27,12 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
 	"nozzle_temperature": [
 		"210"
 	],

resources/profiles/Qidi/filament/Q2/Bambu ABS @Q2.json

@@ -72,35 +72,5 @@
 	"hot_plate_temp": [
 		"90"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"80"
-	],
-	"eng_plate_temp": [
-		"90"
-	],
-	"supertack_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_cool_plate_temp": [
-		"80"
-	],
-	"cool_plate_temp_initial_layer": [
-		"80"
-	],
-	"eng_plate_temp_initial_layer": [
-		"90"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"80"
-	]
 }

resources/profiles/Qidi/filament/Q2/Bambu ABS @Q2C.json

@@ -72,35 +72,5 @@
 	"hot_plate_temp": [
 		"90"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"80"
-	],
-	"eng_plate_temp": [
-		"90"
-	],
-	"supertack_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_cool_plate_temp": [
-		"80"
-	],
-	"cool_plate_temp_initial_layer": [
-		"80"
-	],
-	"eng_plate_temp_initial_layer": [
-		"90"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"80"
-	]
 }

resources/profiles/Qidi/filament/Q2/Bambu PETG @Q2.json

@@ -61,10 +61,10 @@
 		"8"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"60"
+		"70"
 	],
 	"supertack_plate_temp": [
-		"60"
+		"70"
 	],
 	"temperature_vitrification": [
 		"70"
@@ -75,29 +75,5 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_cool_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"60"
-	]
 }

resources/profiles/Qidi/filament/Q2/Bambu PETG @Q2C.json

@@ -61,10 +61,10 @@
 		"8"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"60"
+		"70"
 	],
 	"supertack_plate_temp": [
-		"60"
+		"70"
 	],
 	"temperature_vitrification": [
 		"70"
@@ -75,29 +75,5 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_cool_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"60"
-	]
 }

resources/profiles/Qidi/filament/Q2/Bambu PLA @Q2.json

@@ -42,35 +42,5 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": [],
+	"compatible_printers": []
-	"cool_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_cool_plate_temp": [
-		"45"
-	],
-	"cool_plate_temp_initial_layer": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"45"
-	]
 }