fix: h2d camera liveview (#13779 )

Fix typo 'cancle' -> 'cancel' (#13769 )
Co-authored-by: Shantanu Joshi <shan@example.com>
2026-05-21 12:15:21 +00:00 · 2026-05-21 19:02:16 +08:00 · 2026-05-21 13:18:52 +03:00 · 2026-05-21 17:16:24 +08:00 · 2026-05-21 16:24:54 +08:00 · 2026-05-21 16:07:01 +08:00
455 changed files with 8067 additions and 3528 deletions
--- a/localization/i18n/it/OrcaSlicer_it.po
+++ b/localization/i18n/it/OrcaSlicer_it.po
@@ -17664,9 +17664,10 @@ msgid ""
 "Apply scarf joints only to smooth perimeters where traditional seams do not "
 "conceal the seams at sharp corners effectively."
 msgstr ""
-"Applica le cuciture a sciarpa solo sui perimetri lisci, dove le cuciture "
+"Applica le cuciture a sciarpa solo sui perimetri lisci e curvi, dove le "
-"tradizionali non riescono a nascondere efficacemente quelle in "
+"cuciture tradizionali risulterebbero molto evidenti. Gli angoli netti "
-"corrispondenza degli angoli vivi."
+"continueranno a utilizzare le cuciture normali per mantenere la precisione "
 "dimensionale."
 msgid "Conditional angle threshold"
 msgstr "Soglia angolo condizionale"
@@ -17734,45 +17735,48 @@ msgstr ""
 "cucitura a sciarpa."
 msgid "Scarf start height"
-msgstr "Altezza iniziale sciarpa"
+msgstr "Altezza iniziale cucitura a sciarpa"
 msgid ""
 "Start height of the scarf.\n"
 "This amount can be specified in millimeters or as a percentage of the "
 "current layer height. The default value for this parameter is 0."
 msgstr ""
-"Altezza iniziale della sciarpa.\n"
+"Altezza iniziale della cucitura a sciarpa.\n"
-"Questa quantità può essere specificata in millimetri o come percentuale "
+"Questo valore può essere specificato in millimetri o come percentuale "
 "dell'altezza dello strato corrente. Il valore predefinito per questo "
 "parametro è 0."
 msgid "Scarf around entire wall"
-msgstr "Sciarpa attorno all'intera parete"
+msgstr "Cucitura a sciarpa su intera parete"
 msgid "The scarf extends to the entire length of the wall."
-msgstr "La sciarpa si estende per tutta la lunghezza della parete."
+msgstr ""
 "La cucitura a sciarpa si estende lungo tutto il perimetro della parete."
 msgid "Scarf length"
-msgstr "Lunghezza sciarpa"
+msgstr "Lunghezza cucitura a sciarpa"
 msgid ""
 "Length of the scarf. Setting this parameter to zero effectively disables the "
 "scarf."
 msgstr ""
-"Lunghezza della sciarpa. Impostando questo parametro su zero, la sciarpa "
+"Lunghezza della cucitura a sciarpa. Impostando questo parametro su zero, la "
-"viene effettivamente disabilitata."
+"cucitura a sciarpa viene disabilitata."
 msgid "Scarf steps"
-msgstr "Incrementi sciarpa"
+msgstr "Incrementi cucitura a sciarpa"
 msgid "Minimum number of segments of each scarf."
-msgstr "Numero minimo di segmenti di ogni sciarpa."
+msgstr ""
 "Numero minimo di segmenti utilizzati per la creazione della sfumatura della "
 "cucitura a sciarpa."
 msgid "Scarf joint for inner walls"
 msgstr "Cucitura a sciarpa per pareti interne"
 msgid "Use scarf joint for inner walls as well."
-msgstr "Utilizzare la cucitura a sciarpa anche per le pareti interne."
+msgstr "Utilizza la cucitura a sciarpa anche per le pareti interne."
 msgid "Role base wipe speed"
 msgstr "Velocità di spurgo basata su ruolo"
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"260"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -30,9 +30,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"260"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"250"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"250"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"260"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"260"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"250"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"250"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.2 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.4 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.6 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi Q1 Pro 0.8 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.2 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.4 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.6 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"Bambu PETG @Qidi X-Plus 4 0.8 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -48,12 +48,6 @@
 	"pressure_advance": [
 		"0.04"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"hot_plate_temp": [
 		"80"
 	],
 	"filament_density": [
 		"1.24"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -30,12 +30,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Bambu
+++ b/resources/profiles/Qidi/filament/Bambu
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"260"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -30,9 +30,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"260"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"250"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"250"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"260"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"260"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"250"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"24.5"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"250"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.2 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.4 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.6 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi Q1 Pro 0.8 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.2 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.4 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.6 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -18,9 +18,6 @@
 	"filament_settings_id": [
 		"HATCHBOX PETG @Qidi X-Plus 4 0.8 nozzle"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"overhang_fan_speed": [
 		"90"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -48,12 +48,6 @@
 	"pressure_advance": [
 		"0.04"
 	],
 	"hot_plate_temp_initial_layer": [
 		"80"
 	],
 	"hot_plate_temp": [
 		"80"
 	],
 	"filament_density": [
 		"1.24"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -30,12 +30,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/HATCHBOX
+++ b/resources/profiles/Qidi/filament/HATCHBOX
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -27,9 +27,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -21,9 +21,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"250"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -21,9 +21,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -21,9 +21,6 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -18,9 +18,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -18,9 +18,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -18,9 +18,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -30,12 +30,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -30,12 +30,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -30,12 +30,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Overture
+++ b/resources/profiles/Qidi/filament/Overture
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -27,9 +27,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -21,9 +21,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"250"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -21,9 +21,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -21,9 +21,6 @@
 	"filament_max_volumetric_speed": [
 		"2"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -18,9 +18,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -18,9 +18,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -18,9 +18,6 @@
 	"fan_max_speed": [
 		"80"
 	],
 	"hot_plate_temp_initial_layer": [
 		"90"
 	],
 	"nozzle_temperature": [
 		"255"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -30,12 +30,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -30,12 +30,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -30,12 +30,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/PolyLite
+++ b/resources/profiles/Qidi/filament/PolyLite
@@ -27,12 +27,6 @@
 	"full_fan_speed_layer": [
 		"3"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
--- a/resources/profiles/Qidi/filament/Q2/Bambu
+++ b/resources/profiles/Qidi/filament/Q2/Bambu
@@ -72,5 +72,35 @@
 	"hot_plate_temp": [
 		"90"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"80"
 	],
 	"eng_plate_temp": [
 		"90"
 	],
 	"supertack_plate_temp": [
 		"80"
 	],
 	"textured_plate_temp": [
 		"90"
 	],
 	"textured_cool_plate_temp": [
 		"80"
 	],
 	"cool_plate_temp_initial_layer": [
 		"80"
 	],
 	"eng_plate_temp_initial_layer": [
 		"90"
 	],
 	"supertack_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_plate_temp_initial_layer": [
 		"90"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"80"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Bambu
+++ b/resources/profiles/Qidi/filament/Q2/Bambu
@@ -72,5 +72,35 @@
 	"hot_plate_temp": [
 		"90"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"80"
 	],
 	"eng_plate_temp": [
 		"90"
 	],
 	"supertack_plate_temp": [
 		"80"
 	],
 	"textured_plate_temp": [
 		"90"
 	],
 	"textured_cool_plate_temp": [
 		"80"
 	],
 	"cool_plate_temp_initial_layer": [
 		"80"
 	],
 	"eng_plate_temp_initial_layer": [
 		"90"
 	],
 	"supertack_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_plate_temp_initial_layer": [
 		"90"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"80"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Bambu
+++ b/resources/profiles/Qidi/filament/Q2/Bambu
@@ -61,10 +61,10 @@
 		"8"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"70"
+		"60"
 	],
 	"supertack_plate_temp": [
-		"70"
+		"60"
 	],
 	"temperature_vitrification": [
 		"70"
@@ -75,5 +75,29 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"60"
 	],
 	"eng_plate_temp": [
 		"80"
 	],
 	"textured_plate_temp": [
 		"80"
 	],
 	"textured_cool_plate_temp": [
 		"60"
 	],
 	"cool_plate_temp_initial_layer": [
 		"60"
 	],
 	"eng_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"60"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Bambu
+++ b/resources/profiles/Qidi/filament/Q2/Bambu
@@ -61,10 +61,10 @@
 		"8"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"70"
+		"60"
 	],
 	"supertack_plate_temp": [
-		"70"
+		"60"
 	],
 	"temperature_vitrification": [
 		"70"
@@ -75,5 +75,29 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"60"
 	],
 	"eng_plate_temp": [
 		"80"
 	],
 	"textured_plate_temp": [
 		"80"
 	],
 	"textured_cool_plate_temp": [
 		"60"
 	],
 	"cool_plate_temp_initial_layer": [
 		"60"
 	],
 	"eng_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"60"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Bambu
+++ b/resources/profiles/Qidi/filament/Q2/Bambu
@@ -42,5 +42,35 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"45"
 	],
 	"eng_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"textured_plate_temp": [
 		"60"
 	],
 	"textured_cool_plate_temp": [
 		"45"
 	],
 	"cool_plate_temp_initial_layer": [
 		"45"
 	],
 	"eng_plate_temp_initial_layer": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"45"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Bambu
+++ b/resources/profiles/Qidi/filament/Q2/Bambu
@@ -42,5 +42,35 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"45"
 	],
 	"eng_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"textured_plate_temp": [
 		"60"
 	],
 	"textured_cool_plate_temp": [
 		"45"
 	],
 	"cool_plate_temp_initial_layer": [
 		"45"
 	],
 	"eng_plate_temp_initial_layer": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"45"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -75,5 +75,35 @@
 	"hot_plate_temp": [
 		"90"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"80"
 	],
 	"eng_plate_temp": [
 		"90"
 	],
 	"supertack_plate_temp": [
 		"80"
 	],
 	"textured_plate_temp": [
 		"90"
 	],
 	"textured_cool_plate_temp": [
 		"80"
 	],
 	"cool_plate_temp_initial_layer": [
 		"80"
 	],
 	"eng_plate_temp_initial_layer": [
 		"90"
 	],
 	"supertack_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_plate_temp_initial_layer": [
 		"90"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"80"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -75,5 +75,35 @@
 	"hot_plate_temp": [
 		"90"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"80"
 	],
 	"eng_plate_temp": [
 		"90"
 	],
 	"supertack_plate_temp": [
 		"80"
 	],
 	"textured_plate_temp": [
 		"90"
 	],
 	"textured_cool_plate_temp": [
 		"80"
 	],
 	"cool_plate_temp_initial_layer": [
 		"80"
 	],
 	"eng_plate_temp_initial_layer": [
 		"90"
 	],
 	"supertack_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_plate_temp_initial_layer": [
 		"90"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"80"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -64,10 +64,10 @@
 		"12"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"70"
+		"60"
 	],
 	"supertack_plate_temp": [
-		"70"
+		"60"
 	],
 	"temperature_vitrification": [
 		"70"
@@ -78,5 +78,29 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"60"
 	],
 	"eng_plate_temp": [
 		"80"
 	],
 	"textured_plate_temp": [
 		"80"
 	],
 	"textured_cool_plate_temp": [
 		"60"
 	],
 	"cool_plate_temp_initial_layer": [
 		"60"
 	],
 	"eng_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"60"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -64,10 +64,10 @@
 		"12"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"70"
+		"60"
 	],
 	"supertack_plate_temp": [
-		"70"
+		"60"
 	],
 	"temperature_vitrification": [
 		"70"
@@ -78,5 +78,29 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"60"
 	],
 	"eng_plate_temp": [
 		"80"
 	],
 	"textured_plate_temp": [
 		"80"
 	],
 	"textured_cool_plate_temp": [
 		"60"
 	],
 	"cool_plate_temp_initial_layer": [
 		"60"
 	],
 	"eng_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"60"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -54,5 +54,29 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"eng_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"textured_plate_temp": [
 		"60"
 	],
 	"textured_cool_plate_temp": [
 		"45"
 	],
 	"eng_plate_temp_initial_layer": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"45"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -54,5 +54,29 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"eng_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"textured_plate_temp": [
 		"60"
 	],
 	"textured_cool_plate_temp": [
 		"45"
 	],
 	"eng_plate_temp_initial_layer": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"45"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -46,10 +46,10 @@
 		"0.032"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"35"
+		"45"
 	],
 	"supertack_plate_temp": [
-		"35"
+		"45"
 	],
 	"temperature_vitrification": [
 		"45"
@@ -60,5 +60,29 @@
 	"hot_plate_temp": [
 		"55"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"45"
 	],
 	"eng_plate_temp": [
 		"55"
 	],
 	"textured_plate_temp": [
 		"55"
 	],
 	"textured_cool_plate_temp": [
 		"45"
 	],
 	"cool_plate_temp_initial_layer": [
 		"45"
 	],
 	"eng_plate_temp_initial_layer": [
 		"55"
 	],
 	"textured_plate_temp_initial_layer": [
 		"55"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"45"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -46,10 +46,10 @@
 		"0.032"
 	],
 	"supertack_plate_temp_initial_layer": [
-		"35"
+		"45"
 	],
 	"supertack_plate_temp": [
-		"35"
+		"45"
 	],
 	"temperature_vitrification": [
 		"45"
@@ -60,5 +60,29 @@
 	"hot_plate_temp": [
 		"55"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"45"
 	],
 	"eng_plate_temp": [
 		"55"
 	],
 	"textured_plate_temp": [
 		"55"
 	],
 	"textured_cool_plate_temp": [
 		"45"
 	],
 	"cool_plate_temp_initial_layer": [
 		"45"
 	],
 	"eng_plate_temp_initial_layer": [
 		"55"
 	],
 	"textured_plate_temp_initial_layer": [
 		"55"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"45"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -48,5 +48,35 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"45"
 	],
 	"eng_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"textured_plate_temp": [
 		"60"
 	],
 	"textured_cool_plate_temp": [
 		"45"
 	],
 	"cool_plate_temp_initial_layer": [
 		"45"
 	],
 	"eng_plate_temp_initial_layer": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"45"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -48,5 +48,35 @@
 	"temperature_vitrification": [
 		"45"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"45"
 	],
 	"eng_plate_temp": [
 		"60"
 	],
 	"hot_plate_temp": [
 		"60"
 	],
 	"textured_plate_temp": [
 		"60"
 	],
 	"textured_cool_plate_temp": [
 		"45"
 	],
 	"cool_plate_temp_initial_layer": [
 		"45"
 	],
 	"eng_plate_temp_initial_layer": [
 		"60"
 	],
 	"hot_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_plate_temp_initial_layer": [
 		"60"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"45"
 	]
 }
--- a/resources/profiles/Qidi/filament/Q2/Generic
+++ b/resources/profiles/Qidi/filament/Q2/Generic
@@ -48,5 +48,35 @@
 	"hot_plate_temp": [
 		"35"
 	],
-	"compatible_printers": []
+	"compatible_printers": [],
 	"cool_plate_temp": [
 		"30"
 	],
 	"eng_plate_temp": [
 		"35"
 	],
 	"supertack_plate_temp": [
 		"30"
 	],
 	"textured_plate_temp": [
 		"35"
 	],
 	"textured_cool_plate_temp": [
 		"30"
 	],
 	"cool_plate_temp_initial_layer": [
 		"30"
 	],
 	"eng_plate_temp_initial_layer": [
 		"35"
 	],
 	"supertack_plate_temp_initial_layer": [
 		"30"
 	],
 	"textured_plate_temp_initial_layer": [
 		"35"
 	],
 	"textured_cool_plate_temp_initial_layer": [
 		"30"
 	]
 }
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Ian Chua	bbaa5b761a	fix: h2d camera liveview (#13779 )	2026-05-21 19:02:16 +08:00
Shantanu Joshi	f203cdd682	Fix typo 'cancle' -> 'cancel' (#13769 ) Co-authored-by: Shantanu Joshi <shan@example.com>	2026-05-21 13:18:52 +03:00
SoftFever	b81f865784	fix: reflect synced preset values in UI without switching tabs (#13778 ) After pulling the latest presets from the cloud, changed values such as Layer height kept showing the old value until the user switched tabs. Refresh the active settings tab on sync so updates appear immediately.	2026-05-21 17:16:24 +08:00
Noisyfox	f3cb1992d6	fix(threads): bump worker thread stack to 16MB to survive CGAL emboss (#13772 ) The Emboss text-cut workflow can crash with SIGBUS at a stack-guard page on macOS (and equivalent on Linux) when CGAL's Polygon_mesh_processing::corefine falls back from filtered interval arithmetic (Epick) to exact rational arithmetic (Epeck / mpq_class). On near-degenerate inputs -- coplanar triangles in the projection footprint, very thin font stems, sharp edges or seams under the text -- CGAL's Filtered_predicate_with_state cascade ends up inside Triangulation_2<Projection_traits_3<Epeck>>::march_locate_2D, whose recursive walk plus mpq_class arithmetic frames overflows the worker's 4MB default stack. The fault address sits exactly inside the next thread's guard page, which is the textbook macOS signature. Crash trace (BambuStudio v02.07.00.55, macOS 26.4.1 arm64, embossing text into a model): __gmpn_mul_1 __gmpz_mul / __gmpq_mul CGAL::determinant<mpq_class> Projected_orientation_with_normal_3 Filtered_predicate_with_state::operator() Triangulation_2<...>::orientation Triangulation_2<...>::march_locate_2D Surface_intersection_visitor::triangulate_intersected_faces Polygon_mesh_processing::corefine Slic3r::cut_surface Emboss::cut_surface_to_its Emboss::GenerateTextJob::get_text_mesh PlaterWorker::PlaterJob::process The thread's stack region in the report was exactly 4128K -- the default 4MB plus a small TLS overhead -- and the faulting address hit the adjacent guard page. We have one observed reproducer; the 16 MB value is chosen as 4x defensive headroom over that, not as a measured upper bound. Future heavier emboss inputs may need more. Cumulative cost on a 64-bit target. Slic3r::create_thread has 22 callsites across the codebase. Realistic peak concurrent live count is on the order of 10-15 workers (Plater UI worker, slicing process, FDM- support gizmo, STEP loader, network sync helpers, per-task sender threads in TaskManager up to MaxSendingAtSameTime, per-machine info threads in device-list dialogs, long-lived sync helpers in GUI_App). At 16 MB reserve x ~15 = ~240 MB of address-space commitment in the worst case, which is bounded on any 64-bit target. Resident memory remains proportional to actual stack depth on all three platforms: macOS / Linux mmap the thread stack and defer-commit pages on touch, and Boost.Thread on Win32 passes STACK_SIZE_PARAM_IS_A_RESERVATION to _beginthreadex (verified at libs/thread/src/win32/thread.cpp), so on Windows the bumped value is the reserve, not the initial commit. The 32-bit branch of the previous (sizeof(void*) == 4) ternary is removed: BambuStudio doesn't ship a 32-bit build today, and the literal makes the value easier to read at the callsite. (cherry picked from commit e150b502b3d2afc98b83dcc9e5720e998f9eb79a) Co-authored-by: Abdel Gomez-Perez <nabdel07@icloud.com>	2026-05-21 16:24:54 +08:00
Ian Chua	e68f8284e7	fix: update cloud error message (#13776 ) # Description Updated error message. [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)	2026-05-21 16:07:01 +08:00
Ian Chua	30d342160b	fix: update cloud error message	2026-05-21 16:03:38 +08:00
SoftFever	a8e5a6988e	small tweaks (#13770 ) * fix: update default values for FFF parameters and wipe tower wall type * fix: show ModeSwitchButton in expert mode when develop mode is enabled	2026-05-21 14:22:49 +08:00
Ian Bassi	c5855db578	Line Type preview: Display distances and amount values (#13681 ) * feat(viewer): Display travel distance and move count in G-code summary This commit introduces a new feature that enhances the G-code viewer by displaying the total travel distance and the total number of travel moves in the 'Line Type' summary. This provides users with more detailed statistics about their prints, helping them to better understand the printer's behavior and identify opportunities to optimize travel moves for faster print times. This commit also fixes a critical bug in the G-code processor where the travel distance was being calculated incorrectly. The distance variable was not being updated for non-extruding travel moves, leading to inaccurate statistics. The calculation has been corrected to ensure it is performed for all relevant move types, resulting in accurate travel distance reporting. * Subfix segments kilo mega giga tera peta exa * Add missing values * Grams to Kilos and tons * add distance * Fix tool view * Record and display seam distances Track seam-related distances in print statistics and show them in the GCode viewer. Added total_seam_gap_distance and total_seam_scarf_distance to PrintEstimatedStatistics (with initialization). In GCode::extrude_loop the code now computes seam gap and scarf distances and accumulates them for external perimeters. GCodeViewer uses the summed seam distance when the Seams option is selected in the legend. * Fix travel / wipe distances * Update GCode.cpp * Filament changes estimated time --------- Co-authored-by: Steve Scargall <37674041+sscargal@users.noreply.github.com>	2026-05-21 13:49:43 +08:00
Andrew	a2341920a1	Fix Bambu Cloud embedded WebView login (#13768 ) Handle user_ticket_login Legacy Bambu network plugins completed embedded login with user_login, which the WebView dialog already handled. Newer Bambu login flows can complete with user_ticket_login and return only a short-lived ticket. The external browser path already worked because the local HTTP callback server exchanges that ticket for tokens, fetches the user profile, and passes the resulting session payload to change_user. Mirror that ticket exchange path for embedded WebView login so the dialog can handle user_ticket_login instead of silently ignoring it after verification-code submission.	2026-05-21 13:44:17 +08:00
Aleksandr Dobkinimg src=404 onerror=alert(document.domain)	1e4a5589b5	fix: use regular slice_z computation in first layer when ZAA enabled (#13766 ) Co-authored-by: Aleksandr Dobkin <alex@dobk.in>	2026-05-21 13:36:48 +08:00
blumlaut	9598e1bb9a	fix: OK/Cancel buttons clipped in Flushing Volume dialog (#13762 ) fix: OK/Cancel buttons clipped in Flushing Volume dialog (#13511) The WipingDialog renders its UI inside a wxWebView. When the dialog was clamped to screen size (many filaments, small displays, high DPI), the HTML content exceeded the WebView bounds and the OK/Cancel buttons fell below the visible area. HTML fix: - Convert .container to flexbox column with overflow-y: auto - Pin .button-container with flex-shrink: 0 so it stays visible - Allow .scroll-container to flex-grow for the table area C++ fix: - Replace heuristic extra_size with accurate fixed_overhead estimate - Use correct cell height (25 DIP) matching HTML table row height - Add screen margin for window decorations - Enforce minimum dialog size when clamped Co-authored-by: SoftFever <softfeverever@gmail.com>	2026-05-21 11:42:18 +08:00
Peyton Marcotte	956fcea7e2	Add Optimized Gyroid infill (auto-tuned wavelength + amplitude) (#13379 ) * Add Optimized Gyroid infill (auto-tuned wavelength + amplitude) New infill geometry derived from FillGyroid. Two parameters are auto-computed per-region from density, line spacing, and layer height (no user inputs): omega = sqrt(density_adj) / sqrt(1 + layer_height/spacing) clamped to [0.5, 2.0] -- Euler-Bernoulli buckling: critical load ~ 1/L^2, so shorter wavelength under higher load (denser infill) raises buckling resistance. amplitude = 0.55 / omega^2, clamped to [0.20, 0.65] -- Curved-beam bending stress: peak stress ~ A * omega^2, so amplitude is reduced as omega rises to keep peak fiber stress bounded while preserving stiffness. Files: - src/libslic3r/Fill/FillOptimizedGyroid.{hpp,cpp} (new) - src/libslic3r/Fill/FillBase.cpp (factory case) - src/libslic3r/Fill/Fill.cpp (switch case) - src/libslic3r/Layer.cpp (switch case) - src/libslic3r/PrintConfig.{hpp,cpp} (enum + label) - src/libslic3r/CMakeLists.txt (build sources) User-facing: appears as "Optimized Gyroid" in the Fill Pattern dropdown. Density still chosen by user; omega/amplitude are internal. * Fix build: layer_height is in FillParams, not Fill base * Add ipOptimizedGyroid to multiline infill list in ConfigManipulation * Refactor: replace ipOptimizedGyroid enum with gyroid_optimized boolean Per @RF47's review feedback, fold the optimized wave math into FillGyroid itself behind a per-region boolean instead of a separate infill enum. What changes: - New ConfigOptionBool "gyroid_optimized" on PrintRegionConfig (default false). When unchecked, gyroid behavior is byte-identical to before. - Optimized wave math (compute_omega_factor, compute_amplitude_factor, f_opt, make__opt, make_optimized_gyroid_waves) lives inside FillGyroid.cpp. _fill_surface_single branches on params.gyroid_optimized. - FillParams gains a bool gyroid_optimized field, populated in Fill.cpp from region_config alongside fill_multiline. - UI checkbox added under Strength > Infill in Tab.cpp, label "Optimize gyroid wave (experimental)". Toggle is hidden by ConfigManipulation when sparse_infill_pattern != ipGyroid. - "gyroid_optimized" added to s_Preset_print_options for preset I/O. What goes away: - ipOptimizedGyroid enum value, factory case, switch cases, dropdown label, string key. - FillOptimizedGyroid.cpp / FillOptimizedGyroid.hpp (math moved into FillGyroid.cpp). - Net diff drops by ~250 lines. Existing profiles using gyroid are unaffected. Wire gyroid_optimized through SurfaceFillParams to FillParams Linux build failed because line 921 in Fill.cpp populates a SurfaceFillParams (the dedup struct), not FillParams directly. Add the field there, in operator< / operator==, and copy it to FillParams at both conversion sites. * Use toggle_line for gyroid_optimized: hide row when pattern != gyroid * Account for multiline wall thickness in omega correction (per @RF47) When fill_multiline = N, each gyroid wall is N lines thick, so the geometric scale fed into the buckling correction term should be spacing * N rather than spacing. Increases omega (tighter wavelength) when multiline is enabled, consistent with the thicker wall being more buckling-resistant. * Optimized gyroid via marching squares on the implicit scalar field Per @RF47 review: replace the analytical f_opt / make_one_period_opt wave generator (which had visible kinks at vertical-horizontal transitions) with a marching-squares iso-extraction on the gyroid scalar field, modeled on FillTpmsFK.cpp. - New marchsq::GyroidField in FillGyroid.cpp evaluates F(x,y,z) = sin(fxx)cos(fyy) + sin(fyy)cos(fzz) + sin(fzz)cos(fxx) where fx = omega * baseline (anisotropic in x), fy = fz = baseline. - get_gyroid_polylines() runs marching squares at iso=0 and converts rings to polylines. - _fill_surface_single() optimized branch now builds GyroidField, runs marching squares, and skips the bb.min translate (field output is already in absolute coords). - Dropped: f_opt, make_one_period_opt, make_wave_opt, make_optimized_gyroid_waves, compute_amplitude_factor. Amplitude has no clean analog in iso-zero extraction. - Standard (non-optimized) gyroid path unchanged. * Mass calibration: compensate period by cbrt(omega) for x-anisotropic field Per @RF47: optimized vs standard gyroid had different masses at the same sparse_infill_density setting. Cause: scaling fx by omega while leaving fy=fz at the baseline raised the surface-area-to-volume ratio by approximately omega^(1/3) (the geometric mean of the three frequencies). Fix: multiply the base period by cbrt(omega) so the geometric mean of (fx, fy, fz) returns to the standard baseline. Net effect: fx = omega^(2/3) * baseline_orig fy = fz = omega^(-1/3) * baseline_orig which preserves total mass at the same density setting while preserving the load-direction anisotropy this PR introduces. * Switch optimized gyroid anisotropy from X to Z (per @RF47) Z is the typical compression-load axis for FFF parts and is not at delamination risk under compression — so the dominant failure mode is column buckling of the vertical strands themselves. Tightening fz directly shortens the effective vertical strand length, which improves Z-axis buckling resistance. Mass calibration via cbrt(omega) period compensation still applies (scaling exactly one of three frequencies by omega; the geometric- mean preservation argument is symmetric across axes). * Update src/slic3r/GUI/Tab.cpp Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com> * Address review feedback (Copilot + @RF47) - Fill.cpp: gate params.gyroid_optimized on (params.pattern == ipGyroid) so non-gyroid surfaces don't differ in SurfaceFillParams by an irrelevant flag (would unnecessarily split fill batching). [Copilot suggestion, RF47 confirmed correct] - PrintConfig.cpp: drop "amplitude" from the tooltip; only wavelength is parameterized (the marching-squares iso=0 extraction is invariant to a uniform field scale, so amplitude has no effect). - FillBase.hpp: shorten gyroid_optimized comment to match the actual carried state (no amplitude term). - FillGyroid.cpp: shorten the marchsq namespace comment block; the ODR concern was overstated (FillTpmsFK uses the same pattern fine). * Drop redundant marchsq bb expansion (Copilot) bb is already offset by 10 * scale_(spacing) above for edge-artifact margin; the second offset on bb_field doubled the raster area for no geometric benefit and hurt CPU time on large parts. * Update src/slic3r/GUI/Tab.cpp Co-authored-by: Ian Bassi <ian.bassi@outlook.com> * Fix density mismatch + rename to Z-buckling bias optimization Issue (per @ianalexis): at the same sparse_infill_density setting, the optimized branch produced denser fill than standard. Verified via Python sim (sim_gyroid_compare.py) using marching squares on the implicit field across multiple z slices. Root cause: the omega formula was inverted from the buckling-physics intent. The naive sqrt(density_adj) factor produced omega < 1 at typical print densities (10-30%), which LENGTHENED the Z wavelength instead of shortening it -- net loss in both mass and strength. Fix: - compute_omega_factor: invert to sqrt(1 / density_adj), clamp to [1.0, 2.0]. Now omega = 2.0 at low density (long strands need most help) and clamps to 1.0 above ~30% density (no-op, since standard gyroid is already short enough). - Remove the cbrt(omega) period compensation. Empirically (sim table embedded in FillGyroid.cpp comment) the inverted formula keeps line length per area at ~1.000 of standard across all densities with no period scaling needed. Predicted gains (sim, Z-axis Euler buckling proxy): density line/std strength/std 10% 1.000 2.84x 15% 1.000 1.89x 20% 1.000 1.42x 30%+ 1.000 1.00x (no-op) Rename per @ianalexis: "Optimize gyroid wave" oversells (now no-op above 30% density and Z-only). Renamed user-facing label to "Z-buckling bias optimization (experimental)" with updated tooltip that scopes to vertical compression and discloses the density cutoff. Internal config key (gyroid_optimized) unchanged for diff size. Real-world Instron compression tests at Brown's Prince Lab to follow. --------- Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com> Co-authored-by: Ian Bassi <ian.bassi@outlook.com> Co-authored-by: SoftFever <softfeverever@gmail.com>	2026-05-20 23:42:32 +08:00
HYzd766	b882da99ad	Modifications to the hotbed temperature of various types of printing plates (#13717 )	2026-05-20 22:55:58 +08:00
ExPikaPaka	19eb9e634f	Adds force sync UI button. Added missing code for previous PR (#13757 )	2026-05-20 19:25:51 +08:00
Ian Chua	62d4344e59	feat: Updated UI for better distinction of orca cloud and bambu cloud (#13755 ) * feat: Updated UI for better distinction of orca cloud and bambu cloud * refined UI	2026-05-20 19:21:02 +08:00
Ian Chua	4542a15009	fix: use bambu's network plugin (#13756 )	2026-05-20 19:20:09 +08:00
raistlin7447	b7f872541d	Fix input_filename_base using object name instead of project name (#13753 )	2026-05-20 12:32:53 +08:00
ExPikaPaka	1aedf8f22c	Added UI force-sync button and fixed bug that didn't sync in one case… (#13745 ) * Added UI force-sync button and fixed bug that didn't sync in one case and caused orange highlight * Fix sync preset race: join old thread before starting new one --------- Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com> Co-authored-by: SoftFever <softfeverever@gmail.com>	2026-05-20 12:18:08 +08:00
SoftFever	d2c24fdabb	Fix Linux/Wayland crash on Preview tab at startup (#13747 )	2026-05-20 01:54:17 +08:00
Kappa971	5a77daf75c	Fix Italian translation (#13720 )	2026-05-20 00:46:22 +08:00
Ioannis Giannakas	75039f8bec	Fix first layer toolhead preaheating bug with 2+ extuders and ooze prevention enabled (#13741 )	2026-05-20 00:23:04 +08:00
Ian Chua	ebf9d9fd42	feat: add UI feedback on http error and some logs (#13738 ) * feat: add UI feedback on http error and some logs * spelling fix * show error dialog only once per session * show errors with plater notification when on developer mode * remove return * remove irrelevant logs	2026-05-19 23:15:44 +08:00