Fixes 4 Compiler Warnings (#10727)

* fixes: may be used uninitialized [-Wmaybe-uninitialized]

* fixes: arc_len_next may be used uninitialized [-Wmaybe-uninitialized]

* review result: reverts {} initializer with = to keep code style consistent

resources/profiles/Custom.json

@@ -1,6 +1,6 @@
 {
 	"name": "Custom Printer",
-	"version": "02.04.00.02",
+	"version": "02.04.00.01",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [

resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json

@@ -24,6 +24,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json

@@ -24,6 +24,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PA @MyToolChanger.json

@@ -24,6 +24,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json

@@ -24,6 +24,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PC @MyToolChanger.json

@@ -25,6 +25,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json

@@ -25,6 +25,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json

@@ -25,6 +25,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json

@@ -25,6 +25,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json

@@ -25,6 +25,12 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/machine/fdm_klipper_common.json

@@ -116,7 +116,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Slope Lift",
+	"z_hop_types": "Normal Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",

resources/profiles/Custom/machine/fdm_repetier_common.json

@@ -118,7 +118,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Slope Lift",
+	"z_hop_types": "Normal Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",

resources/profiles/Custom/machine/fdm_rrf_common.json

@@ -116,7 +116,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Slope Lift",
+	"z_hop_types": "Normal Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",

resources/profiles/Custom/machine/fdm_toolchanger_common.json

@@ -172,11 +172,11 @@
 		"0.4"
 	],
 	"z_hop_types": [
-		"Slope Lift",
+		"Normal Lift",
-		"Slope Lift",
+		"Normal Lift",
-		"Slope Lift",
+		"Normal Lift",
-		"Slope Lift",
+		"Normal Lift",
-		"Slope Lift"
+		"Normal Lift"
 	],
 	"purge_in_prime_tower": "0",
 	"machine_pause_gcode": "M601",

resources/profiles/OrcaFilamentLibrary.json

@@ -1,6 +1,6 @@
 {
 	"name": "OrcaFilamentLibrary",
-	"version": "02.04.00.04",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Orca Filament Library",
 	"filament_list": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json

@@ -36,9 +36,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_type": [
 		"PET-CF"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json

@@ -39,9 +39,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json

@@ -39,9 +39,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json

@@ -21,9 +21,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_type": [
 		"PLA-AERO"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json

@@ -27,9 +27,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_scarf_seam_type": [
 		"none"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json

@@ -21,9 +21,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json

@@ -36,9 +36,6 @@
 	"filament_max_volumetric_speed": [
 		"1"
 	],
-	"filament_multitool_ramming_flow": [
-		"1"
-	],
 	"filament_retraction_minimum_travel": [
 		"3"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas ASA @base.json

@@ -72,6 +72,15 @@
 	"fan_min_speed": [
 		"10"
 	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
 	"filament_cost": [
 		"599"
 	],
@@ -90,12 +99,30 @@
 	"filament_is_support": [
 		"0"
 	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"15"
 	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_notes": [
 		""
 	],
@@ -138,6 +165,21 @@
 	"filament_soluble": [
 		"0"
 	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
 	"filament_vendor": [
 		"Elas"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PETG Basic @base.json

@@ -42,6 +42,15 @@
 	"fan_min_speed": [
 		"20"
 	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
 	"filament_cost": [
 		"445"
 	],
@@ -60,12 +69,30 @@
 	"filament_is_support": [
 		"0"
 	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
 	"filament_long_retractions_when_cut": [
 		"1"
 	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_notes": [
 		""
 	],
@@ -108,6 +135,21 @@
 	"filament_soluble": [
 		"0"
 	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
 	"filament_wipe": [
 		"nil"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Basic @base.json

@@ -71,6 +71,15 @@
 	"fan_min_speed": [
 		"60"
 	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
 	"filament_cost": [
 		"449.5"
 	],
@@ -89,12 +98,30 @@
 	"filament_is_support": [
 		"0"
 	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"25"
 	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_notes": [
 		""
 	],
@@ -137,6 +164,21 @@
 	"filament_soluble": [
 		"0"
 	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
 	"filament_vendor": [
 		"Elas"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Pro @base.json

@@ -71,6 +71,15 @@
 	"fan_min_speed": [
 		"100"
 	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
 	"filament_cost": [
 		"500"
 	],
@@ -89,12 +98,30 @@
 	"filament_is_support": [
 		"0"
 	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_notes": [
 		""
 	],
@@ -137,6 +164,21 @@
 	"filament_soluble": [
 		"0"
 	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
 	"filament_vendor": [
 		"Elas"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json

@@ -24,9 +24,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"nozzle_temperature": [
 		"290"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @base.json

@@ -35,9 +35,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_vendor": [
 		"Elegoo"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json

@@ -12,9 +12,6 @@
 	"filament_max_volumetric_speed": [
 		"10"
 	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
 	"nozzle_temperature": [
 		"220"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Neon @System.json

@@ -44,8 +44,5 @@
 	],
 	"filament_max_volumetric_speed": [
 		"10"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
 	]
 }

resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Silk @System.json

@@ -44,8 +44,5 @@
 	],
 	"filament_max_volumetric_speed": [
 		"8"
-	],
-	"filament_multitool_ramming_flow": [
-		"8"
 	]
 }

resources/profiles/OrcaFilamentLibrary/filament/Generic PA-CF @System.json

@@ -10,8 +10,5 @@
 	"filament_type": [
 		"PA-CF"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @System.json

@@ -8,8 +8,5 @@
 	"filament_max_volumetric_speed": [
 		"20"
 	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
 	"compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json

@@ -17,9 +17,6 @@
 	"filament_max_volumetric_speed": [
 		"11.5"
 	],
-	"filament_multitool_ramming_flow": [
-		"13"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json

@@ -12,9 +12,6 @@
 	"filament_max_volumetric_speed": [
 		"18"
 	],
-	"filament_multitool_ramming_flow": [
-		"25"
-	],
 	"slow_down_layer_time": [
 		"4"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json

@@ -8,9 +8,6 @@
 	"filament_max_volumetric_speed": [
 		"11"
 	],
-	"filament_multitool_ramming_flow": [
-		"11"
-	],
 	"filament_retraction_length": [
 		"0.8"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @System.json

@@ -15,9 +15,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_type": [
 		"PP-CF"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @System.json

@@ -15,9 +15,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_type": [
 		"PP-GF"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Air PLA @base.json

@@ -17,9 +17,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_vendor": [
 		"Overture"
 	],

resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @base.json

@@ -23,9 +23,6 @@
 	"filament_max_volumetric_speed": [
 		"7.5"
 	],
-	"filament_multitool_ramming_flow": [
-		"7.5"
-	],
 	"filament_vendor": [
 		"Valment"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json

@@ -43,12 +43,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"15"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_type": [
 		"ABS"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json

@@ -43,12 +43,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_type": [
 		"ASA"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json

@@ -41,15 +41,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
-	"filament_multitool_ramming_volume": [
-		"0.1"
-	],
 	"filament_type": [
 		"BVOH"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json

@@ -66,12 +66,6 @@
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
 	"filament_retract_before_wipe": [
 		"nil"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json

@@ -41,9 +41,6 @@
 	"filament_max_volumetric_speed": [
 		"16"
 	],
-	"filament_multitool_ramming_flow": [
-		"16"
-	],
 	"filament_scarf_seam_type": [
 		"none"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json

@@ -8,9 +8,6 @@
 	"filament_type": [
 		"EVA"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"supertack_plate_temp": [
 		"0"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json

@@ -41,9 +41,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_type": [
 		"HIPS"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json

@@ -44,9 +44,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"filament_type": [
 		"PA"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json

@@ -7,9 +7,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"filament_type": [
 		"PAHT"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json

@@ -86,9 +86,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"16"
-	],
 	"filament_flow_ratio": [
 		"0.94"
 	]

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json

@@ -26,9 +26,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
 	"filament_type": [
 		"PCTG"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json

@@ -38,9 +38,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"filament_type": [
 		"PE"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json

@@ -26,9 +26,6 @@
 	"filament_max_volumetric_speed": [
 		"10"
 	],
-	"filament_multitool_ramming_flow": [
-		"15"
-	],
 	"filament_type": [
 		"PETG"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json

@@ -38,9 +38,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_type": [
 		"PHA"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json

@@ -38,9 +38,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
 	"filament_scarf_seam_type": [
 		"none"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json

@@ -9,9 +9,6 @@
 	"filament_flow_ratio": [
 		"0.98"
 	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
 	"slow_down_layer_time": [
 		"8"
 	]

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json

@@ -38,9 +38,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"filament_type": [
 		"PP"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json

@@ -47,9 +47,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_type": [
 		"PPA-CF"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json

@@ -43,9 +43,6 @@
 	"filament_max_volumetric_speed": [
 		"4"
 	],
-	"filament_multitool_ramming_flow": [
-		"4"
-	],
 	"filament_type": [
 		"PPS"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json

@@ -40,15 +40,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
-	"filament_multitool_ramming_volume": [
-		"0.1"
-	],
 	"filament_soluble": [
 		"1"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json

@@ -11,9 +11,6 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
-	"filament_multitool_ramming_flow": [
-		"12"
-	],
 	"filament_type": [
 		"SBS"
 	],

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json

@@ -43,15 +43,6 @@
 	"filament_max_volumetric_speed": [
 		"3.2"
 	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"3.2"
-	],
-	"filament_multitool_ramming_volume": [
-		"0.1"
-	],
 	"filament_retraction_length": [
 		"0.4"
 	],

resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Marble @base.json

@@ -17,9 +17,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_vendor": [
 		"eSUN"
 	],

resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Matte @base.json

@@ -17,9 +17,6 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
 	"filament_vendor": [
 		"eSUN"
 	],

resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json

@@ -21,9 +21,6 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
-	"filament_multitool_ramming_flow": [
-		"6"
-	],
 	"filament_vendor": [
 		"eSUN"
 	],

resources/profiles/Snapmaker.json

@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.08",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
@@ -426,6 +426,10 @@
 			"name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json"
 		},
+		{
+			"name": "0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle)",
+			"sub_path": "process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json"
+		},
 		{
 			"name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json"
@@ -482,66 +486,6 @@
 			"name": "fdm_process_U1_0.8_common",
 			"sub_path": "process/fdm_process_U1_0.8_common.json"
 		},
-		{
-			"name": "fdm_process_U1_0.06_nozzle_0.2",
-			"sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json"
-		},
-		{
-			"name": "fdm_process_U1_0.08_nozzle_0.2",
-			"sub_path": "process/fdm_process_U1_0.08_nozzle_0.2.json"
-		},
-		{
-			"name": "fdm_process_U1_0.10_nozzle_0.2",
-			"sub_path": "process/fdm_process_U1_0.10_nozzle_0.2.json"
-		},
-		{
-			"name": "fdm_process_U1_0.12_nozzle_0.2",
-			"sub_path": "process/fdm_process_U1_0.12_nozzle_0.2.json"
-		},
-		{
-			"name": "fdm_process_U1_0.14_nozzle_0.2",
-			"sub_path": "process/fdm_process_U1_0.14_nozzle_0.2.json"
-		},
-		{
-			"name": "fdm_process_U1_0.18_nozzle_0.6",
-			"sub_path": "process/fdm_process_U1_0.18_nozzle_0.6.json"
-		},
-		{
-			"name": "fdm_process_U1_0.24_nozzle_0.6",
-			"sub_path": "process/fdm_process_U1_0.24_nozzle_0.6.json"
-		},
-		{
-			"name": "fdm_process_U1_0.24_nozzle_0.8",
-			"sub_path": "process/fdm_process_U1_0.24_nozzle_0.8.json"
-		},
-		{
-			"name": "fdm_process_U1_0.30_nozzle_0.6",
-			"sub_path": "process/fdm_process_U1_0.30_nozzle_0.6.json"
-		},
-		{
-			"name": "fdm_process_U1_0.32_nozzle_0.8",
-			"sub_path": "process/fdm_process_U1_0.32_nozzle_0.8.json"
-		},
-		{
-			"name": "fdm_process_U1_0.36_nozzle_0.6",
-			"sub_path": "process/fdm_process_U1_0.36_nozzle_0.6.json"
-		},
-		{
-			"name": "fdm_process_U1_0.40_nozzle_0.8",
-			"sub_path": "process/fdm_process_U1_0.40_nozzle_0.8.json"
-		},
-		{
-			"name": "fdm_process_U1_0.42_nozzle_0.6",
-			"sub_path": "process/fdm_process_U1_0.42_nozzle_0.6.json"
-		},
-		{
-			"name": "fdm_process_U1_0.48_nozzle_0.8",
-			"sub_path": "process/fdm_process_U1_0.48_nozzle_0.8.json"
-		},
-		{
-			"name": "fdm_process_U1_0.56_nozzle_0.8",
-			"sub_path": "process/fdm_process_U1_0.56_nozzle_0.8.json"
-		},
 		{
 			"name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
 			"sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json"
@@ -1564,6 +1508,10 @@
 			"name": "Snapmaker PLA Metal @U1",
 			"sub_path": "filament/Snapmaker PLA Metal @U1.json"
 		},
+		{
+			"name": "Snapmaker PLA Silk @U1",
+			"sub_path": "filament/Snapmaker PLA Silk @U1.json"
+		},
 		{
 			"name": "Snapmaker PLA Silk",
 			"sub_path": "filament/Snapmaker PLA Silk.json"
@@ -1723,214 +1671,6 @@
 		{
 			"name": "Snapmaker PLA Matte @U1 base",
 			"sub_path": "filament/Snapmaker PLA Matte @U1 base.json"
-		},
-		{
-			"name": "Polymaker PLA @U1 base",
-			"sub_path": "filament/Polymaker PLA @U1 base.json"
-		},
-		{
-			"name": "Polymaker Silk PLA Family @U1",
-			"sub_path": "filament/Polymaker Silk PLA Family @U1.json"
-		},
-		{
-			"name": "Polymaker Tough PLA Family @U1",
-			"sub_path": "filament/Polymaker Tough PLA Family @U1.json"
-		},
-		{
-			"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG HF @U1 base2",
-			"sub_path": "filament/Snapmaker PETG HF @U1 base2.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 base",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 base.json"
-		},
-		{
-			"name": "Snapmaker PLA Basic @U1 base",
-			"sub_path": "filament/Snapmaker PLA Basic @U1 base.json"
-		},
-		{
-			"name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Glow @U1 base",
-			"sub_path": "filament/Snapmaker PLA Glow @U1 base.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 base2",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 base2.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PLA Silk @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA Silk @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA Silk @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 base2",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 base2.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 base",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 base.json"
-		},
-		{
-			"name": "Snapmaker PLA Wood @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PLA Wood @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Wood @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA Wood @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Wood @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA Wood @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA-CF @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PLA-CF @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA-CF @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA-CF @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA-CF @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA-CF @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PVA @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PVA @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PVA @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PVA @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 90A @U1",
-			"sub_path": "filament/Snapmaker TPU 90A @U1.json"
-		},
-		{
-			"name": "Snapmaker TPU 90A @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker TPU 90A @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 90A @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker TPU 90A @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 95A HF @U1",
-			"sub_path": "filament/Snapmaker TPU 95A HF @U1.json"
-		},
-		{
-			"name": "Snapmaker TPU 95A HF @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 95A HF @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1",
-			"sub_path": "filament/Snapmaker PLA Silk @U1.json"
-		},
-		{
-			"name": "Polymaker General PLA Family @U1",
-			"sub_path": "filament/Polymaker General PLA Family @U1.json"
-		},
-		{
-			"name": "Snapmaker PETG HF @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG HF @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG HF @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PETG HF @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Basic @U1",
-			"sub_path": "filament/Snapmaker PLA Basic @U1.json"
-		},
-		{
-			"name": "Snapmaker PLA Glow @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PLA Glow @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.2 nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.4 nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.6 nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json"
 		}
 	],
 	"machine_list": [

resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json

@@ -1,32 +0,0 @@
-{
-	"type": "filament",
-	"setting_id": "thXfSaUkOAKJ50ey",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_vendor": [
-		"Polymaker"
-	],
-	"from": "system",
-	"inherits": "Polymaker PLA @U1 base",
-	"name": "Polymaker General PLA Family @U1",
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"temperature_vitrification": [
-		"62"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Snapmaker/filament/Polymaker PLA @U1 base.json

@@ -1,107 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker PLA @U1 base",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"instantiation": "false",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_vendor": [
-		"Generic"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_plate_temp": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"55"
-	],
-	"filament_start_gcode": [
-		"; Filament gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_id": "OGFL99"
-}

resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json

@@ -1,32 +0,0 @@
-{
-	"type": "filament",
-	"setting_id": "h8vIYpXbxFtHPV6e",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"filament_density": [
-		"1.34"
-	],
-	"filament_vendor": [
-		"Polymaker"
-	],
-	"from": "system",
-	"inherits": "Polymaker PLA @U1 base",
-	"name": "Polymaker Silk PLA Family @U1",
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json

@@ -1,32 +0,0 @@
-{
-	"type": "filament",
-	"setting_id": "d6CC81Es2hp46bto",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"filament_density": [
-		"1.23"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_vendor": [
-		"Polymaker"
-	],
-	"from": "system",
-	"inherits": "Polymaker PLA @U1 base",
-	"name": "Polymaker Tough PLA Family @U1",
-	"slow_down_layer_time": [
-		"6"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json

@@ -7,8 +7,5 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"filament_retract_length_toolchange": [
-		"5"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json

@@ -7,8 +7,5 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"filament_retract_length_toolchange": [
-		"5"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json

@@ -1,104 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "mJoaud6wulT4p8SA",
-	"instantiation": "true",
-	"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
-	"inherits": "Snapmaker Breakaway Support @base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_min_speed": [
-		"20"
-	],
-	"filament_cost": [
-		"69.98"
-	],
-	"filament_density": [
-		"1.3"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"0.5"
-	],
-	"filament_retract_length_toolchange": [
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature": [
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"pressure_advance": [
-		"0.2"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"5"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json

@@ -1,104 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "rKUUREJNhstIU0I2",
-	"instantiation": "true",
-	"name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
-	"inherits": "Snapmaker Breakaway Support @base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"filament_cost": [
-		"69.98"
-	],
-	"filament_density": [
-		"1.3"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"210"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_retract_length_toolchange": [
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"1"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"2"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json

@@ -1,98 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "hQ8jQ5GKQKGKuPew",
-	"instantiation": "true",
-	"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
-	"inherits": "Snapmaker Breakaway Support @base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"filament_cost": [
-		"69.98"
-	],
-	"filament_density": [
-		"1.3"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.93"
-	],
-	"filament_retract_length_toolchange": [
-		"10"
-	],
-	"filament_retraction_length": [
-		"3"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"210"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"pressure_advance": [
-		"0.015"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"textured_plate_temp": [
-		"65"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json

@@ -1,92 +1,14 @@
 {
 	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1",
+	"inherits": "Snapmaker Breakaway Support @base",
 	"from": "system",
 	"setting_id": "5DqT3CYUgp1oJD1V",
 	"instantiation": "true",
-	"name": "Snapmaker Breakaway Support For PLA @U1",
-	"inherits": "Snapmaker Breakaway Support @base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
 	"filament_type": [
 		"PLA"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"1"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"20"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_retract_length_toolchange": [
-		"5"
-	],
-	"filament_retraction_length": [
-		"1"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"210"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json

@@ -1,108 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG HF @U1 0.2 nozzle",
-	"inherits": "Snapmaker PETG HF @U1 base2",
-	"from": "system",
-	"setting_id": "Ujul2YTBwfldFiFd",
-	"instantiation": "true",
-	"filament_max_volumetric_speed": [
-		"1",
-		"1"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"eng_plate_temp": [
-		"80"
-	],
-	"eng_plate_temp_initial_layer": [
-		"80"
-	],
-	"fan_cooling_layer_time": [
-		"20"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"30"
-	],
-	"filament_end_gcode": [
-		"\n\n"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"3"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_retract_length_toolchange": [
-		"5"
-	],
-	"filament_retraction_length": [
-		"1.5"
-	],
-	"filament_start_gcode": [
-		""
-	],
-	"filament_vendor": [
-		"Snapmaker"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"nozzle_temperature": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"60"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json

@@ -1,113 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG HF @U1 0.6 nozzle",
-	"inherits": "Snapmaker PETG HF @U1 base2",
-	"from": "system",
-	"setting_id": "2FfQZdp5xunngnF0",
-	"instantiation": "true",
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"eng_plate_temp": [
-		"80"
-	],
-	"eng_plate_temp_initial_layer": [
-		"80"
-	],
-	"fan_cooling_layer_time": [
-		"20"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"30"
-	],
-	"filament_end_gcode": [
-		"\n"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_retract_length_toolchange": [
-		"5"
-	],
-	"filament_retraction_length": [
-		"2.5"
-	],
-	"filament_start_gcode": [
-		""
-	],
-	"filament_vendor": [
-		"Snapmaker"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"nozzle_temperature": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"60"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json

@@ -1,110 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG HF @U1 0.8 nozzle",
-	"inherits": "Snapmaker PETG HF @U1 base2",
-	"from": "system",
-	"setting_id": "ebANa67V4B2nwUaX",
-	"instantiation": "true",
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"eng_plate_temp": [
-		"80"
-	],
-	"eng_plate_temp_initial_layer": [
-		"80"
-	],
-	"fan_cooling_layer_time": [
-		"20"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"30"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_retract_length_toolchange": [
-		"5"
-	],
-	"filament_retraction_length": [
-		"1"
-	],
-	"filament_start_gcode": [
-		""
-	],
-	"filament_vendor": [
-		"Snapmaker"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"2"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"nozzle_temperature": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"60"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 base2.json

@@ -1,279 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG HF @U1 base2",
-	"inherits": "fdm_filament_petg",
-	"from": "system",
-	"filament_id": "GFG96",
-	"instantiation": "false",
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_density": [
-		"1.28"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"hot_plate_temp": [
-		"70"
-	],
-	"hot_plate_temp_initial_layer": [
-		"70"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"slow_down_layer_time": [
-		"25"
-	],
-	"textured_plate_temp": [
-		"70"
-	],
-	"textured_plate_temp_initial_layer": [
-		"70"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"fan_min_speed": [
-		"20"
-	],
-	"filament_cooling_before_tower": [
-		"0"
-	],
-	"filament_dev_ams_drying_ams_limitations": [
-		"0"
-	],
-	"filament_dev_ams_drying_temperature": [
-		"40.0"
-	],
-	"filament_dev_ams_drying_time": [
-		"8.0"
-	],
-	"filament_dev_drying_softening_temperature": [
-		"40.0"
-	],
-	"filament_dev_ams_drying_heat_distortion_temperature": [
-		"45.0"
-	],
-	"filament_dev_drying_cooling_temperature": [
-		"35.0"
-	],
-	"filament_dev_chamber_drying_bed_temperature": [
-		"90.0"
-	],
-	"filament_dev_chamber_drying_time": [
-		"12.0"
-	],
-	"filament_flush_temp": [
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_long_retractions_when_ec": [
-		"nil"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_printable": [
-		"3"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_distances_when_ec": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_vendor": [
-		"Generic"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_prime_volume_nc": [
-		"60"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_pre_cooling_temperature": [
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"long_retractions_when_ec": [
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"no_slow_down_for_cooling_on_outwalls": [
-		"0"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"temperature_vitrification": [
-		"70"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_velocity_adaptation_factor": [
-		"1"
-	],
-	"compatible_printers": [],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json

@@ -1,110 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "UTpedqYJysaoe3OI",
-	"instantiation": "true",
-	"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"20"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_min_speed": [
-		"20"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_cost": [
-		"25"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_max_volumetric_speed": [
-		"1"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"5"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_retract_length_toolchange": [
-		"10"
-	],
-	"filament_retraction_length": [
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"50"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"nozzle_temperature": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pressure_advance": [
-		"0.23"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"enable_pressure_advance": [
-		"0"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json

@@ -1,98 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "k6UQJJASzFSfePqN",
-	"instantiation": "true",
-	"name": "Snapmaker PETG Translucent @U1 0.4 nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_flow_ratio": [
-		"0.97"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_retract_length_toolchange": [
-		"5"
-	],
-	"filament_retraction_length": [
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"nozzle_temperature": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pressure_advance": [
-		"0.04"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"filament_density": [
-		"1.25"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json

@@ -1,107 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "FlcbnP3kWiJLMDMl",
-	"instantiation": "true",
-	"name": "Snapmaker PETG Translucent @U1 0.6 nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"20"
-	],
-	"filament_cost": [
-		"25"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"nozzle_temperature": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_retract_length_toolchange": [
-		"10"
-	],
-	"filament_retraction_length": [
-		"1.2"
-	],
-	"filament_retraction_minimum_travel": [
-		"1"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_wipe_distance": [
-		"2"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"enable_pressure_advance": [
-		"0"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json

@@ -1,104 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "aJk3TnFTU3uQGjd3",
-	"instantiation": "true",
-	"name": "Snapmaker PETG Translucent @U1 0.8 nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"20"
-	],
-	"filament_cost": [
-		"25"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_flow_ratio": [
-		"0.97"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"nozzle_temperature": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"30"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
-	"filament_retract_length_toolchange": [
-		"10"
-	],
-	"filament_retraction_length": [
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"enable_pressure_advance": [
-		"0"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json

@@ -1,8 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
-	"name": "Snapmaker PETG Translucent @U1 base",
-	"filament_id": "PETG_TRANSLUCENT_001",
-	"inherits": "fdm_filament_petg"
-}

resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA @U1 base",
-	"filament_id": "14170311270",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "14170311270",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json

@@ -1,127 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
-	"name": "Snapmaker PLA Basic @U1 base",
-	"filament_id": "1417031127011",
-	"filament_end_gcode": [
-		""
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_loading_speed_start": [
-		"35"
-	],
-	"filament_loading_speed": [
-		"35"
-	],
-	"filament_unloading_speed_start": [
-		"35"
-	],
-	"filament_unloading_speed": [
-		"35"
-	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_cooling_initial_speed": [
-		"35"
-	],
-	"filament_cooling_final_speed": [
-		"60"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json

@@ -1,284 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "ZtUJN4JpkR0MLpiY",
-	"instantiation": "true",
-	"name": "Snapmaker PLA Basic @U1",
-	"inherits": "Snapmaker PLA Basic @U1 base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_cooling_final_speed": [
-		"3.5"
-	],
-	"filament_cooling_initial_speed": [
-		"10"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_cost": [
-		"25.4"
-	],
-	"filament_density": [
-		"1.32"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"10"
-	],
-	"filament_loading_speed_start": [
-		"50"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"25"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_length_toolchange": [
-		"10"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"45"
-	],
-	"filament_stamping_loading_speed": [
-		"29"
-	],
-	"filament_start_gcode": [
-		""
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_unloading_speed": [
-		"100"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_vendor": [
-		"Snapmaker"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Eco @U1 base",
-	"filament_id": "2008037900",
 	"inherits": "fdm_filament_pla_eco",
+	"from": "system",
+	"filament_id": "2008037900",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json

@@ -1,284 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "iybaFWrXKOsmXgMJ",
-	"instantiation": "true",
-	"name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
-	"inherits": "Snapmaker PLA Basic @U1 base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_cooling_final_speed": [
-		"3.5"
-	],
-	"filament_cooling_initial_speed": [
-		"10"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_cost": [
-		"25.4"
-	],
-	"filament_density": [
-		"1.32"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"10"
-	],
-	"filament_loading_speed_start": [
-		"50"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"25"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_length_toolchange": [
-		"10"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"45"
-	],
-	"filament_stamping_loading_speed": [
-		"29"
-	],
-	"filament_start_gcode": [
-		""
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_unloading_speed": [
-		"100"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_vendor": [
-		"Snapmaker"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json

@@ -1,95 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "ee1YNNr8CwKetuvY",
-	"instantiation": "true",
-	"name": "Snapmaker PLA Glow @U1 0.4 nozzle",
-	"inherits": "Snapmaker PLA Glow @U1 base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"80"
-	],
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"filament_cooling_final_speed": [
-		"3.4"
-	],
-	"filament_cooling_initial_speed": [
-		"2.2"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_flow_ratio": [
-		"0.97"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_loading_speed_start": [
-		"3"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"30"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
-	"filament_retract_length_toolchange": [
-		"5"
-	],
-	"filament_retraction_length": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json

@@ -1,44 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
-	"name": "Snapmaker PLA Glow @U1 base",
-	"filament_id": "SPGLOW001",
-	"inherits": "fdm_filament_pla",
-	"filament_end_gcode": [
-		""
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_loading_speed_start": [
-		"35"
-	],
-	"filament_loading_speed": [
-		"35"
-	],
-	"filament_unloading_speed_start": [
-		"35"
-	],
-	"filament_unloading_speed": [
-		"35"
-	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_cooling_initial_speed": [
-		"35"
-	],
-	"filament_cooling_final_speed": [
-		"60"
-	],
-	"nozzle_temperature": [
-		"220"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json

@@ -1,287 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "d3c48DeNk7VDeeHf",
-	"instantiation": "true",
-	"name": "Snapmaker PLA Matte @U1 0.2 nozzle",
-	"inherits": "Snapmaker PLA Matte @U1 base2",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"45"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		" "
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_length_toolchange": [
-		"2"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		" "
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_vendor": [
-		"Snapmaker"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"filament_max_volumetric_speed": [
-		"2"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"additional_cooling_fan_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"3.5"
-	],
-	"filament_cooling_initial_speed": [
-		"10"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"1.05"
-	],
-	"filament_loading_speed": [
-		"10"
-	],
-	"filament_loading_speed_start": [
-		"50"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"5"
-	],
-	"filament_multitool_ramming_flow": [
-		"4"
-	],
-	"filament_multitool_ramming_volume": [
-		"4"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_stamping_distance": [
-		"45"
-	],
-	"filament_stamping_loading_speed": [
-		"29"
-	],
-	"filament_unloading_speed": [
-		"100"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"nozzle_temperature": [
-		"215"
-	],
-	"nozzle_temperature_initial_layer": [
-		"215"
-	],
-	"pressure_advance": [
-		"0.025"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json

@@ -1,287 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "l3E1WaljDn2uoTqW",
-	"instantiation": "true",
-	"name": "Snapmaker PLA Matte @U1 0.6 nozzle",
-	"inherits": "Snapmaker PLA Matte @U1 base2",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"45"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		" "
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_length_toolchange": [
-		"10"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		" "
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_vendor": [
-		"Snapmaker"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"45"
-	],
-	"textured_plate_temp_initial_layer": [
-		"45"
-	],
-	"additional_cooling_fan_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"3.5"
-	],
-	"filament_cooling_initial_speed": [
-		"10"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_flow_ratio": [
-		"0.99"
-	],
-	"filament_loading_speed": [
-		"10"
-	],
-	"filament_loading_speed_start": [
-		"50"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.6"
-	],
-	"filament_stamping_distance": [
-		"45"
-	],
-	"filament_stamping_loading_speed": [
-		"29"
-	],
-	"filament_unloading_speed": [
-		"100"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature": [
-		"215"
-	],
-	"nozzle_temperature_initial_layer": [
-		"215"
-	],
-	"pressure_advance": [
-		"0.015"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json

@@ -1,287 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "NLPd4AA0seW3NXdy",
-	"instantiation": "true",
-	"name": "Snapmaker PLA Matte @U1 0.8 nozzle",
-	"inherits": "Snapmaker PLA Matte @U1 base2",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"45"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		" "
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_length_toolchange": [
-		"10"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		" "
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_vendor": [
-		"Snapmaker"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"nozzle_temperature": [
-		"215"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"additional_cooling_fan_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"3.5"
-	],
-	"filament_cooling_initial_speed": [
-		"10"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_loading_speed": [
-		"10"
-	],
-	"filament_loading_speed_start": [
-		"50"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.6"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_stamping_distance": [
-		"45"
-	],
-	"filament_stamping_loading_speed": [
-		"29"
-	],
-	"filament_unloading_speed": [
-		"100"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature_initial_layer": [
-		"215"
-	],
-	"pressure_advance": [
-		"0.015"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Matte @U1 base",
+	"from": "system",
 	"filament_id": "141703112701",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json

@@ -1,127 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
-	"name": "Snapmaker PLA Matte @U1 base2",
-	"filament_id": "141703112701",
-	"filament_end_gcode": [
-		""
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_loading_speed_start": [
-		"35"
-	],
-	"filament_loading_speed": [
-		"35"
-	],
-	"filament_unloading_speed_start": [
-		"35"
-	],
-	"filament_unloading_speed": [
-		"35"
-	],
-	"filament_load_time": [
-		"2"
-	],
-	"filament_unload_time": [
-		"2"
-	],
-	"filament_cooling_moves": [
-		"2"
-	],
-	"filament_cooling_initial_speed": [
-		"35"
-	],
-	"filament_cooling_final_speed": [
-		"60"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"cool_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1",
+	"inherits": "Snapmaker PLA @U1 base",
 	"from": "system",
 	"setting_id": "uAhykL5ap1DAKacf",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Matte @U1",
-	"inherits": "Snapmaker PLA @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -27,7 +27,7 @@
 		"0"
 	],
 	"additional_cooling_fan_speed": [
-		"80"
+		"70"
 	],
 	"chamber_temperature": [
 		"0"
@@ -47,6 +47,9 @@
 	"cool_plate_temp_initial_layer": [
 		"60"
 	],
+	"default_filament_colour": [
+		""
+	],
 	"dont_slow_down_outer_wall": [
 		"0"
 	],
@@ -57,7 +60,7 @@
 		"1"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"1"
 	],
 	"eng_plate_temp": [
 		"60"
@@ -99,7 +102,7 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
-		"1"
+		"1.01"
 	],
 	"filament_is_support": [
 		"0"
@@ -114,7 +117,7 @@
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
-		"22"
+		"20"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -137,9 +140,6 @@
 	"filament_retract_before_wipe": [
 		"nil"
 	],
-	"filament_retract_length_toolchange": [
-		"5"
-	],
 	"filament_retract_lift_above": [
 		"nil"
 	],
@@ -216,19 +216,19 @@
 		"0"
 	],
 	"hot_plate_temp": [
-		"65"
+		"55"
 	],
 	"hot_plate_temp_initial_layer": [
-		"65"
+		"55"
 	],
 	"idle_temperature": [
 		"0"
 	],
 	"nozzle_temperature": [
-		"215"
+		"220"
 	],
 	"nozzle_temperature_initial_layer": [
-		"215"
+		"220"
 	],
 	"nozzle_temperature_range_high": [
 		"240"
@@ -276,9 +276,9 @@
 		"40"
 	],
 	"textured_plate_temp": [
-		"65"
+		"60"
 	],
 	"textured_plate_temp_initial_layer": [
-		"65"
+		"60"
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Metal @U1 base",
-	"filament_id": "20299943460",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "20299943460",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],
@@ -46,5 +46,8 @@
 	],
 	"nozzle_temperature": [
 		"220"
+	],
+	"default_filament_colour": [
+		""
 	]
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json

@@ -1,285 +0,0 @@
-{
-	"type": "filament",
-	"from": "system",
-	"setting_id": "Q5xH6oGGlbXr14Pa",
-	"instantiation": "true",
-	"name": "Snapmaker PLA Silk @U1 0.2 nozzle",
-	"inherits": "Snapmaker PLA Basic @U1 base",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"100"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"60"
-	],
-	"cool_plate_temp_initial_layer": [
-		"60"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"60"
-	],
-	"eng_plate_temp_initial_layer": [
-		"60"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_cost": [
-		"25.4"
-	],
-	"filament_density": [
-		"1.32"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_flow_ratio": [
-		"1.02"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"3"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_length_toolchange": [
-		"5"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		""
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_vendor": [
-		"Snapmaker"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"18"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"dont_slow_down_outer_wall": [
-		"1"
-	],
-	"filament_cooling_final_speed": [
-		"3.4"
-	],
-	"filament_cooling_initial_speed": [
-		"2.2"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_loading_speed_start": [
-		"3"
-	],
-	"filament_max_volumetric_speed": [
-		"2"
-	],
-	"filament_retraction_length": [
-		"0.4"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"pressure_advance": [
-		"0.015"
-	],
-	"filament_id": "11813638720"
-}