restore transparent cover image

This reverts commit bf024ed34e.

docs/HLSD/deferred-page-construction.md

@@ -0,0 +1,220 @@
+# Deferred Page Construction: High Level Design
+
+## Why it exists
+
+The main window is a notebook of tabs. When the first frame appears, one tab is on
+screen and the others are not; some of them are opened later in the session, some
+never, and some only exist for certain printers. Building a tab before the first frame
+adds its cost to every startup, whether or not the tab is used.
+
+This subsystem builds a tab's panel the first time the tab is shown. It also builds the
+remaining tabs while the user is idle after startup, in units of tens of milliseconds,
+so a click that lands in the middle of one waits for that unit and no longer. Startup
+pays only for what the first frame shows, and the other tabs are usually built before
+anyone opens them.
+
+## The parts
+
+`src/slic3r/GUI/Lazy.hpp`, `LazyPage.hpp`, `StagedBuild.hpp` and `IdleScheduler.hpp/.cpp`
+(with its wx-free `PrebuildQueue.hpp`) are independent. A holder can hold anything a
+factory makes, a page is a holder with a placeholder widget, a staged object can live
+outside a holder, and the scheduler knows none of them; it runs tasks, which `MainFrame`
+makes from the holders.
+
+### Lazy<T>: the holder
+
+Holds an object that a factory makes on first use, under a name for the log and a place
+in the idle queue, both given by the owner. The header has no wx dependency; the busy
+cursor for an on-demand build lives in `Lazy.cpp` and is skipped when there is no app,
+so the holder is unit-tested.
+
+- `get()` is null until the object is completely built; `built()` says the same.
+- `ensure()` builds whatever is left now, under a busy cursor, and returns the object, or
+  null in the two cases below. A click on an unbuilt tab or a first open of a dialog goes
+  through this, and it logs the units and time it took.
+- `build_step()` runs one unit of construction and returns true while more remain. The
+  first unit is the factory call, and each later unit is one `StagedBuild` step if the
+  type has them.
+- `when_built(fn)` runs `fn(object)` now if it exists, otherwise once it is built.
+- `pending()` says whether the idle prebuild has work here: not built, and the factory
+  has not returned null. A null factory result is logged and the holder stays unbuilt.
+- A unit that pumps the event loop cannot re-enter the holder; a nested `build_step()`
+  does nothing and a nested `ensure()` returns null.
+- After a unit throws, the holder and the scheduler still run the next one.
+
+The holder does not own the object; its wx parent does, as for any window. A type with
+one instance in the app derives from `LazyInstance<T>`, which points at that instance's
+holder (the holder registers itself, and a recreated `MainFrame`'s holder replaces the
+old frame's) and gives the type the static entry points the rest of the app uses,
+`T::if_built()`, `T::ensure()` and `T::when_built(fn)`. They return null, or do
+nothing, while no holder exists, so a caller needs no `mainframe` check.
+
+`built()` is an atomic flag, since a job worker reads it through the statics
+(`MainFrame::get_calibration_curr_tab()`); it is set after the object is complete.
+
+`LazyBase` is the holder's type-free interface (`name()`, `built()`, `pending()`,
+`build_step()`, `prebuild_order()`) and is what the scheduler side sees.
+
+### LazyPage<Panel>: the placeholder
+
+A `wxPanel` placed in the parent in place of the real panel, and a `Lazy<Panel>` whose
+factory makes the panel inside it (by default `new Panel(parent)`). The notebook needs a
+page object for the tab to exist and for `show_device()` to insert and remove tabs by
+pointer, and the placeholder is that object. `MainFrame` creates every page once, named
+after its `TAB_ID_*`, and keeps it for the frame's life; `show_device()` only moves
+pages in and out of the book.
+
+- `Show()` is forwarded to the panel, so a panel's own `Show()` override stays its
+  activation hook (refresh timers, machine sync) and `SelectPageByName()` works
+  unchanged. A show builds the panel unless the frame itself is still hidden, because
+  the book selects its first page as it is inserted; `MainFrame::Show()` shows the
+  current page again when the frame becomes visible, which builds it.
+- `in_book()` says whether the parent notebook currently lists the page, and
+  `pending()` is that and not built, so a tab `show_device()` has taken out of the book
+  is not prebuilt.
+- A panel built while its page is hidden stays hidden, and a completed panel gets the
+  dark-mode pass the frame ran before it existed.
+
+The Compare presets dialog is a holder without a page. `MainFrame` keeps a
+`Lazy<DiffPresetDialog>` whose factory constructs the dialog and binds its events, the
+dialog derives from `LazyInstance`, and its callers use
+`DiffPresetDialog::ensure()->show()` and `DiffPresetDialog::if_built()` like a tab's
+callers do. Saving a preset refreshes the dialog only while it is shown, since `show()`
+reloads the presets.
+
+### StagedBuild: construction in units
+
+A mixin for a panel whose constructor is too big to be one unit. The constructor builds
+the skeleton (sizers, and the parts other code may touch) and queues the rest with
+`add_build_step()`. `build_step()` runs one step, and `add_build_steps_of(child)`
+forwards a child's steps so a nested panel is spread the same way; the parent is built
+only once the child is, including steps the child queues later. Steps run in order, on
+the main thread. A `Lazy<T>` recognises a staged type at compile time and runs its steps
+one per unit.
+
+Nothing may touch what a step builds before the last step has run. In practice:
+
+- nothing paints the panel before it is complete, since a panel built at idle is hidden
+  with its page and one built on demand finishes inside `ensure()` before the event loop
+  runs again;
+- members created in steps are initialised to null in the header, so a partially built
+  panel can be destroyed;
+- timers and event handlers that use step content check `built()` first
+  (`MonitorPanel::update_all()`, `CalibrationPanel::update_all()`), and a child's steps
+  are queued before anything in the constructor can fire such a handler;
+- a destructor that disconnects from step content checks `built()` first;
+- a constructor or step does not take focus while the panel is off screen
+  (`IsShownOnScreen()` before `SetFocus()`), since it may run while the user is typing
+  elsewhere;
+- where a step's widgets must keep their place in a sizer that later steps also fill, the
+  constructor adds an empty slot sizer in that position and the step fills the slot
+  (`StatusBasePanel`).
+
+### IdleScheduler: when to build
+
+A task is any `LazyBase`: a name for the log, `pending()`, `build_step()` and
+`prebuild_order()`. `PrebuildQueue` holds the tasks by order (equal order in the order
+added) and runs a slice, the units of the first pending task until it completes, the
+budget is spent on the clock it is given, or the interrupt predicate says input arrived.
+It has no wx dependency and is unit-tested with a fake clock. A task whose work is gone
+is passed over and stays in the queue, so a tab that `show_device()` removes and later
+re-inserts is pending again.
+
+`IdleScheduler` drives the queue with the real clock, the app's input timestamp and the
+Windows queue check, and logs each unit and slice. Each slice is a timer message: a
+period of 250 ms while waiting for the user to go quiet, and a one-shot of zero after a
+slice that left work, so the event loop dispatches whatever it has queued (paint,
+timers, input) before the next slice runs. Chaining slices with `CallAfter` would not do
+this: wx drains pending events fully before the next native message, on every platform.
+On GTK the one-shot is 5 ms, because a due GLib timeout runs ahead of the redraw and
+idle sources that paint and deliver posted events.
+A slice runs only once the user has been idle for the quiet time, and the timer stops
+itself once no task is pending. The tick period, quiet time and slice length are
+constants in `IdleScheduler.cpp`. A unit cannot be interrupted once started, so the
+largest unit bounds click latency on Windows; on the other platforms a click also waits
+for the rest of the slice. A unit that pumps the event loop lets the timer fire inside
+its own slice, and that tick does nothing.
+
+The tasks are made by their owners. `MainFrame::prebuild_pages_when_idle()` registers
+every `LazyPage` the frame created, in or out of the book (`pending()` is false for a
+page out of the book), the Compare presets holder, and the Prepare sidebar's settings
+page from `ParamsPanel::settings_page_prebuild()`, whose first unit selects the default
+tab if none is selected yet and whose later units build one option group each.
+`show_device()` only restarts the timer. `MainFrame` owns the scheduler because it owns
+everything the tasks build, and clearing the queue with the frame is what keeps a task
+from outliving its object.
+
+Idle time comes from `GUI_App::FilterEvent`, which timestamps mouse and keyboard events
+(`wxEVT_CATEGORY_USER_INPUT` minus command events, which all claim that category), and
+`GUI_App::input_idle_ms()` reports it. On Windows a slice additionally refuses to start
+when the message queue holds keyboard, button, touch or pen input. Mouse moves are
+excluded because Windows synthesises one whenever a window appears under the cursor,
+which every unit does. Other platforms use the timestamp alone.
+
+Once every registered page is built the timer is stopped and the subsystem costs
+nothing.
+
+## Rules
+
+**What builds before the first frame.** The Prepare tab's plater, because `post_init()`
+needs its GL canvas on screen to initialise OpenGL in every startup state, and the start
+page the user configured. Home is built by the first `MainFrame::Show()`, Prepare's
+settings page by selecting the tab. `post_init()` passes through the Prepare tab for GL
+init under `Freeze()` with `MainFrame::select_prepare_for_gl_init()`, which changes the
+selection without the page-changed event, so nothing else is built for that pass.
+
+**Reaching a lazy object.** A caller uses the type's own statics. `T::if_built()` may
+return null and is for telling the object something it can live without (a rescale, a
+colour change, a status update). `T::ensure()` builds the object and is for navigating
+to it or for a caller that is about to show it. A caller that tells the object something
+it would not fetch for itself on construction uses `T::when_built()`, which keeps the
+message until the object exists. A panel that pulls its state when constructed (the Home
+page requests the recent list on load, the Device tab reads the device manager on show)
+is reached with `if_built()`; one that cannot pull gets `when_built()`.
+
+**Unit size.** A unit cannot be interrupted, so it should stay within the slice length on
+a fast machine. A constructor above that is staged. A single widget above it is the
+floor unless the widget itself is split.
+
+**Order.** Cheapest and most likely to be opened first, given where `MainFrame` creates
+each holder. The settings page is 0 (the Prepare tab's own content), Home 10, Device 20
+(a Bambu user's usual second stop), Calibration 30, Multi-device 40, the web Device
+view 50, Project 60 (a second WebView2 instance) and the Compare presets dialog 100;
+steps of ten so a new tab takes a value between its neighbours without renumbering
+them. `MainFrame::prebuild_pages_when_idle()` registers the tasks once, from
+`post_init()`.
+
+**Never prebuilt.** A holder with a negative order, for a tab that few sessions open
+and that costs more to build unasked than it saves (the Design tab), and plugin-provided
+tabs, which are Python-side and not lazy pages.
+
+## Adopting it
+
+A lazy tab needs:
+
+1. The panel derived from `LazyInstance<Panel>`, since a tab's panel has one instance.
+2. A `LazyPage<Panel>*` member in `MainFrame`, created once in `init_tabpanel()` with
+   its `TAB_ID_*` as the name, its place by the order rule (and a factory if
+   `new Panel(parent)` is not enough), added to `m_lazy_pages`, and used wherever the
+   tab is added to or looked up in the notebook.
+3. Every use of the panel outside `MainFrame` going through one of the panel's statics,
+   chosen by the rule above. When converting an existing member, `grep` for it; the
+   compiler finds the rest.
+4. A constructor that copes with the frame already existing and the user being busy
+   elsewhere, since `wxGetApp().mainframe` is set, the frame may be shown, and the user
+   may be typing when a lazy panel is built: no `SetFocus()` while off screen, and
+   whatever the constructor did through a `MainFrame` accessor before (a mode update, a
+   deferred URL) done in the constructor itself.
+
+To stage a heavy constructor, inherit `StagedBuild`, keep the skeleton in the constructor,
+move the rest into `add_build_step()` lambdas in the original order, and follow the
+staged-panel rules above. Measure the units. A step that is still one big widget has to
+be split inside that widget or accepted as the floor.
+
+Verification is by log. `MainFrame::prebuild_pages_when_idle` lists the queue it
+registered, `IdleScheduler::tick` reports each completed task by name at info level and
+each slice and unit at debug level, and `Lazy::ensure` reports an object a user built
+on demand with the units and time it took. A run from the configured start
+page shows every registered page complete, in order, with no unit longer than intended.
+A click on a tab mid-prebuild shows the finished panel with an `ensure` line for what was
+left, and the slices resume for the remaining tasks once the user is idle again.

docs/HLSD/preset-cache.md

@@ -76,9 +76,10 @@ and the count of errors the original parse hit.
 
 Each entry is one preset **in source form**: what its JSON sub-file states and nothing
 that resolving it derives — the preset's own config diff, the name of the preset it
-inherits, and the parse metadata (name, sub-path, description, instantiation, setting
+inherits, the names of the presets it includes, and the parse metadata (name, sub-path,
-and filament ids, renames). Non-instantiated base presets are stored too; the children
+description, instantiation, setting and filament ids, renames). Non-instantiated base
-that inherit from them cannot resolve without them.
+presets are stored too; the children that inherit from or include them cannot resolve
+without them.
 
 **The payload names its own keys.** The dictionary holds the distinct `opt_key`s the
 file uses, the `ConfigOptionType` each was written as, and the distinct enum *value
@@ -161,9 +162,9 @@ cache nothing can invalidate is worse than no cache.
 
 Vendors load in a fixed order, because filament inheritance crosses exactly one
 boundary: any vendor's filament may inherit from the shared Orca filament library,
-and nothing else reaches across vendors. The library therefore goes first, alone;
+and nothing else reaches across vendors — an `include` is always vendor-local. The
-every other vendor follows in parallel, resolving against it; and the results are
+library therefore goes first, alone; every other vendor follows in parallel, resolving
-merged in a stable order:
+against it; and the results are merged in a stable order:
 
 ```mermaid
 flowchart LR
@@ -211,13 +212,16 @@ and its cache was never written back.
 
 Serving from a cache is not a memory-image restore. The entries are deserialized and
 then installed one by one — inheritance resolved against the presets installed before
-them and the currently loaded filament library, configs flattened onto the collection
+them and the currently loaded filament library, includes layered in, configs flattened
-defaults, validated and registered — by the same function the JSON path calls straight
+onto the collection defaults, validated and registered — by the same function the JSON
-after parsing a sub-file. The two paths share everything below the parse, which is what
+path calls straight after parsing a sub-file. An `include` layers what the included
-makes a cache-loaded bundle indistinguishable from a JSON-loaded one by construction
+base states, between the parent and the preset's own keys: the base's diff against the
-rather than by test coverage. Installation also rebuilds each preset's file path from
+default, taken when the base itself was installed and before the per-variant padding
-the local data directory, so a shipped cache never carries the generating machine's
+`inherits` sees, so only what a template sets reaches the presets including it. The two
-paths.
+paths share everything below the parse, which is what makes a cache-loaded bundle
+indistinguishable from a JSON-loaded one by construction rather than by test coverage.
+Installation also rebuilds each preset's file path from the local data directory, so a
+shipped cache never carries the generating machine's paths.
 
 App upgrades work because a cache normally survives one. Only a deliberate
 `CACHE_VERSION` bump makes an installed cache unreadable, and that is handled at

resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json

@@ -1,41 +1,41 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL A1 0.2 nozzle",
+    "name": "Bambu ABS @BBL A1 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_08",
+    "setting_id": "GFSB00_08",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"20"
+        "20"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2"
+        "2"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"hot_plate_temp": [
+    "hot_plate_temp": [
-		"100"
+        "100"
-	],
+    ],
-	"hot_plate_temp_initial_layer": [
+    "hot_plate_temp_initial_layer": [
-		"100"
+        "100"
-	],
+    ],
-	"reduce_fan_stop_start_freq": [
+    "reduce_fan_stop_start_freq": [
-		"0"
+        "0"
-	],
+    ],
-	"slow_down_layer_time": [
+    "slow_down_layer_time": [
-		"12"
+        "12"
-	],
+    ],
-	"textured_plate_temp": [
+    "textured_plate_temp": [
-		"100"
+        "100"
-	],
+    ],
-	"textured_plate_temp_initial_layer": [
+    "textured_plate_temp_initial_layer": [
-		"100"
+        "100"
-	],
+    ],
-	"compatible_printers": [
+    "compatible_printers": [
-		"Bambu Lab A1 0.2 nozzle"
+        "Bambu Lab A1 0.2 nozzle"
-	]
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL A1.json

@@ -1,43 +1,46 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL A1",
+    "name": "Bambu ABS @BBL A1",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_07",
+    "setting_id": "GFSB00_07",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"20"
+        "20"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"16"
+        "16"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"hot_plate_temp": [
+    "filament_retraction_length": [
-		"100"
+        "0.4"
-	],
+    ],
-	"hot_plate_temp_initial_layer": [
+    "hot_plate_temp": [
-		"100"
+        "100"
-	],
+    ],
-	"reduce_fan_stop_start_freq": [
+    "hot_plate_temp_initial_layer": [
-		"0"
+        "100"
-	],
+    ],
-	"slow_down_layer_time": [
+    "reduce_fan_stop_start_freq": [
-		"12"
+        "0"
-	],
+    ],
-	"textured_plate_temp": [
+    "slow_down_layer_time": [
-		"100"
+        "12"
-	],
+    ],
-	"textured_plate_temp_initial_layer": [
+    "textured_plate_temp": [
-		"100"
+        "100"
-	],
+    ],
-	"compatible_printers": [
+    "textured_plate_temp_initial_layer": [
-		"Bambu Lab A1 0.4 nozzle",
+        "100"
-		"Bambu Lab A1 0.6 nozzle",
+    ],
-		"Bambu Lab A1 0.8 nozzle"
+    "compatible_printers": [
-	]
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.2 nozzle.json

@@ -1,210 +1,113 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2C 0.2 nozzle",
+    "name": "Bambu ABS @BBL H2C 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_23",
+    "setting_id": "GFSB00_23",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0124"
+        "0.0124"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.3341"
+        "0.3341"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_min": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"fan_min_speed": [
+    "fan_min_speed": [
-		"40"
+        "40"
-	],
+    ],
-	"filament_change_length": [
+    "filament_change_length": [
-		"4"
+        "4"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_pre_cooling_temperature_nc": [
-		"230",
+        "230",
-		"230"
+        "230"
-	],
+    ],
-	"filament_prime_volume": [
+    "filament_prime_volume": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_prime_volume_nc": [
+    "filament_prime_volume_nc": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "filament_ramming_travel_time_nc": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"first_x_layer_fan_speed": [
+    "first_x_layer_fan_speed": [
-		"0"
+        "0"
-	],
+    ],
-	"filament_change_length_nc": [
+    "filament_change_length_nc": [
-		"4"
+        "4"
-	],
+    ],
-	"hole_coef_2": [
+    "hole_coef_2": [
-		"-0.0008"
+        "-0.0008"
-	],
+    ],
-	"hole_coef_3": [
+    "hole_coef_3": [
-		"0.1319"
+        "0.1319"
-	],
+    ],
-	"hole_limit_max": [
+    "hole_limit_max": [
-		"0.1319"
+        "0.1319"
-	],
+    ],
-	"hole_limit_min": [
+    "hole_limit_min": [
-		"0.1119"
+        "0.1119"
-	],
+    ],
-	"filament_preheat_temperature_delta": [
+    "filament_preheat_temperature_delta": [
-		"20",
+        "20",
-		"20"
+        "20"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_deretraction_speed": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_extruder_variant": [
+        "260",
-		"Direct Drive Standard",
+        "260"
-		"Direct Drive High Flow"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_flush_temp": [
+        "100"
-		"0",
+    ],
-		"0"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"filament_flush_volumetric_speed": [
+    ],
-		"0",
+    "slow_down_min_speed": [
-		"0"
+        "20",
-	],
+        "20"
-	"filament_flow_ratio": [
+    ],
-		"0.95",
+    "temperature_vitrification": [
-		"0.95"
+        "75"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab H2C 0.2 nozzle"
-		"nil"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_pre_cooling_temperature": [
+        "; filament start gcode\n"
-		"0",
+    ],
-		"0"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_retract_length_nc": [
+    ]
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.6 nozzle.json

@@ -1,204 +1,141 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2C 0.6 nozzle",
+    "name": "Bambu ABS @BBL H2C 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_34",
+    "setting_id": "GFSB00_34",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0124"
+        "0.0124"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_min": [
-		"0.3341"
+        "0.0241"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_max": [
-		"0.0241"
+        "0.3341"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_change_length": [
+    "filament_cooling_before_tower": [
-		"4"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10"
-		"10",
+    ],
-		"10"
+    "filament_flow_ratio": [
-	],
+        "0.98",
-	"filament_flow_ratio": [
+        "0.98",
-		"0.98",
+        "0.98"
-		"0.98"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_max_volumetric_speed": [
+        "25",
-		"25",
+        "30",
-		"30"
+        "25"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.4",
-	],
+        "0.4"
-	"filament_prime_volume": [
+    ],
-		"30"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_prime_volume_nc": [
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_wipe_distance": [
-		"0",
+        "1",
-		"0"
+        "1",
-	],
+        "1"
-	"filament_ramming_travel_time_nc": [
+    ],
-		"1",
+    "filament_prime_volume": [
-		"1"
+        "30"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_prime_volume_nc": [
-		"0.4",
+        "30"
-		"0.4"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_wipe": [
+        "Spiral Lift",
-		"1",
+        "Spiral Lift",
-		"1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_pre_cooling_temperature_nc": [
-		"1",
+        "230",
-		"1"
+        "230",
-	],
+        "230"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "filament_ramming_travel_time": [
-		"Spiral Lift"
+        "0",
-	],
+        "0",
-	"first_x_layer_fan_speed": [
+        "0"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time_nc": [
-	"filament_change_length_nc": [
+        "1",
-		"4"
+        "1",
-	],
+        "1"
-	"hole_coef_2": [
+    ],
-		"-0.0008"
+    "filament_change_length": [
-	],
+        "4"
-	"hole_coef_3": [
+    ],
-		"0.1319"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"hole_limit_max": [
+    ],
-		"0.1319"
+    "first_x_layer_fan_speed": [
-	],
+        "0"
-	"hole_limit_min": [
+    ],
-		"0.1119"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_preheat_temperature_delta": [
+    ],
-		"20",
+    "hole_coef_3": [
-		"20"
+        "0.1319"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "hole_limit_min": [
-		"0",
+        "0.1119"
-		"0"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_deretraction_speed": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "filament_preheat_temperature_delta": [
-	],
+        "20",
-	"filament_extruder_variant": [
+        "20",
-		"Direct Drive Standard",
+        "20"
-		"Direct Drive High Flow"
+    ],
-	],
+    "include": [
-	"filament_flush_temp": [
+        "fdm_filament_template_direct_dual_e3d"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_long_retractions_when_cut": [
+        "260",
-		"nil",
+        "260",
-		"nil"
+        "260"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "slow_down_layer_time": [
-		"0",
+        "12"
-		"0"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_length_nc": [
+        "20",
-		"14",
+        "20",
-		"14"
+        "20"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "temperature_vitrification": [
-		"-1",
+        "75"
-		"-1"
+    ],
-	],
+    "compatible_printers": [
-	"filament_ramming_volumetric_speed_nc": [
+        "Bambu Lab H2C 0.6 nozzle"
-		"-1",
+    ],
-		"-1"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.8 nozzle.json

@@ -1,204 +1,127 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2C 0.8 nozzle",
+    "name": "Bambu ABS @BBL H2C 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_35",
+    "setting_id": "GFSB00_35",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0124"
+        "0.0124"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.3341"
+        "0.3341"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_min": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_change_length": [
+    "filament_change_length": [
-		"4"
+        "4"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_flow_ratio": [
-		"0.98",
+        "0.98",
-		"0.98"
+        "0.98"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"30"
+        "30"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_pre_cooling_temperature_nc": [
-		"230",
+        "230",
-		"230"
+        "230"
-	],
+    ],
-	"filament_prime_volume": [
+    "filament_prime_volume": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_prime_volume_nc": [
+    "filament_prime_volume_nc": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "filament_ramming_travel_time_nc": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_retraction_length": [
-		"0.4",
+        "0.4",
-		"0.4"
+        "0.4"
-	],
+    ],
-	"filament_wipe": [
+    "filament_wipe": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_wipe_distance": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_z_hop_types": [
+    "filament_z_hop_types": [
-		"Spiral Lift",
+        "Spiral Lift",
-		"Spiral Lift"
+        "Spiral Lift"
-	],
+    ],
-	"first_x_layer_fan_speed": [
+    "first_x_layer_fan_speed": [
-		"0"
+        "0"
-	],
+    ],
-	"filament_change_length_nc": [
+    "filament_change_length_nc": [
-		"4"
+        "4"
-	],
+    ],
-	"hole_coef_2": [
+    "hole_coef_2": [
-		"-0.0008"
+        "-0.0008"
-	],
+    ],
-	"hole_coef_3": [
+    "hole_coef_3": [
-		"0.1319"
+        "0.1319"
-	],
+    ],
-	"hole_limit_max": [
+    "hole_limit_max": [
-		"0.1319"
+        "0.1319"
-	],
+    ],
-	"hole_limit_min": [
+    "hole_limit_min": [
-		"0.1119"
+        "0.1119"
-	],
+    ],
-	"filament_preheat_temperature_delta": [
+    "filament_preheat_temperature_delta": [
-		"20",
+        "20",
-		"20"
+        "20"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_deretraction_speed": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_extruder_variant": [
+        "260",
-		"Direct Drive Standard",
+        "260"
-		"Direct Drive High Flow"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_flush_temp": [
+        "12"
-		"0",
+    ],
-		"0"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_flush_volumetric_speed": [
+        "20"
-		"0",
+    ],
-		"0"
+    "temperature_vitrification": [
-	],
+        "75"
-	"filament_long_retractions_when_cut": [
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil"
+        "Bambu Lab H2C 0.8 nozzle"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "filament_start_gcode": [
-		"0",
+        "; filament start gcode\n"
-		"0"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_retract_length_nc": [
+        "; filament end gcode \n"
-		"14",
+    ]
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2C.json

@@ -1,204 +1,141 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2C",
+    "name": "Bambu ABS @BBL H2C",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_22",
+    "setting_id": "GFSB00_22",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0124"
+        "0.0124"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.0241"
+        "0.0241"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_min": [
-		"0.3341"
+        "0.0241"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_max": [
-		"0.0241"
+        "0.3341"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_change_length": [
+    "filament_cooling_before_tower": [
-		"4"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10"
-		"10",
+    ],
-		"10"
+    "filament_flow_ratio": [
-	],
+        "0.98",
-	"filament_flow_ratio": [
+        "0.98",
-		"0.98",
+        "0.98"
-		"0.98"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_max_volumetric_speed": [
+        "20",
-		"20",
+        "30",
-		"30"
+        "20"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.6",
-	],
+        "0.4"
-	"filament_prime_volume": [
+    ],
-		"30"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_prime_volume_nc": [
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_wipe_distance": [
-		"0",
+        "1",
-		"0"
+        "1",
-	],
+        "1"
-	"filament_ramming_travel_time_nc": [
+    ],
-		"1",
+    "filament_prime_volume": [
-		"1"
+        "30"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_prime_volume_nc": [
-		"0.4",
+        "30"
-		"0.6"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_wipe": [
+        "Spiral Lift",
-		"1",
+        "Spiral Lift",
-		"1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_pre_cooling_temperature_nc": [
-		"1",
+        "230",
-		"1"
+        "230",
-	],
+        "230"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "filament_ramming_travel_time": [
-		"Spiral Lift"
+        "0",
-	],
+        "0",
-	"first_x_layer_fan_speed": [
+        "0"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time_nc": [
-	"filament_change_length_nc": [
+        "1",
-		"4"
+        "1",
-	],
+        "1"
-	"hole_coef_2": [
+    ],
-		"-0.0008"
+    "filament_change_length": [
-	],
+        "4"
-	"hole_coef_3": [
+    ],
-		"0.1319"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"hole_limit_max": [
+    ],
-		"0.1319"
+    "first_x_layer_fan_speed": [
-	],
+        "0"
-	"hole_limit_min": [
+    ],
-		"0.1119"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_preheat_temperature_delta": [
+    ],
-		"20",
+    "hole_coef_3": [
-		"20"
+        "0.1319"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "hole_limit_min": [
-		"0",
+        "0.1119"
-		"0"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_deretraction_speed": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "filament_preheat_temperature_delta": [
-	],
+        "20",
-	"filament_extruder_variant": [
+        "20",
-		"Direct Drive Standard",
+        "20"
-		"Direct Drive High Flow"
+    ],
-	],
+    "include": [
-	"filament_flush_temp": [
+        "fdm_filament_template_direct_dual_e3d"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_long_retractions_when_cut": [
+        "260",
-		"nil",
+        "260",
-		"nil"
+        "260"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "slow_down_layer_time": [
-		"0",
+        "12"
-		"0"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_length_nc": [
+        "20",
-		"14",
+        "20",
-		"14"
+        "20"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "temperature_vitrification": [
-		"-1",
+        "75"
-		"-1"
+    ],
-	],
+    "compatible_printers": [
-	"filament_ramming_volumetric_speed_nc": [
+        "Bambu Lab H2C 0.4 nozzle"
-		"-1",
+    ],
-		"-1"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json

@@ -1,134 +1,83 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2D 0.2 nozzle",
+    "name": "Bambu ABS @BBL H2D 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_12",
+    "setting_id": "GFSB00_12",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "2",
-		"nil"
+        "2"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"2",
+        "0",
-		"2"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retract_before_wipe": [
+        "4"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1319"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "hole_limit_max": [
-		"nil",
+        "0.1319"
-		"nil"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_retraction_distances_when_cut": [
+        "0.1119"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_length": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "slow_down_layer_time": [
-		"nil"
+        "12"
-	],
+    ],
-	"filament_wipe": [
+    "slow_down_min_speed": [
-		"nil",
+        "20",
-		"nil"
+        "20"
-	],
+    ],
-	"filament_wipe_distance": [
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab H2D 0.2 nozzle"
-		"nil"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_z_hop": [
+        "; filament start gcode\n"
-		"nil",
+    ],
-		"nil"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_z_hop_types": [
+    ]
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.6 nozzle.json

@@ -1,138 +1,109 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2D 0.6 nozzle",
+    "name": "Bambu ABS @BBL H2D 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_29",
+    "setting_id": "GFSB00_29",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"35"
+        "35",
-	],
+        "25"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_retraction_length": [
-		"nil"
+        "0.4",
-	],
+        "0.4",
-	"filament_retract_when_changing_layer": [
+        "0.4"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_wipe_distance": [
-	"filament_retraction_length": [
+        "1",
-		"0.4",
+        "1",
-		"0.4"
+        "1"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift",
-	],
+        "Spiral Lift"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "-0.0008"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1319"
-		"1"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_wipe_distance": [
+        "0.1319"
-		"1",
+    ],
-		"1"
+    "hole_limit_min": [
-	],
+        "0.1119"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "nozzle_temperature": [
-		"Spiral Lift",
+        "270",
-		"Spiral Lift"
+        "270",
-	],
+        "270"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature_initial_layer": [
-		"Direct Drive High Flow"
+        "260",
-	],
+        "260",
-	"filament_pre_cooling_temperature": [
+        "260"
-		"0",
+    ],
-		"0"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"filament_ramming_travel_time": [
+    ],
-		"0",
+    "slow_down_min_speed": [
-		"0"
+        "20",
-	],
+        "20",
-	"filament_adaptive_volumetric_speed": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D 0.6 nozzle"
-	"filament_extruder_id": [
+    ],
-		"1",
+    "filament_start_gcode": [
-		"1"
+        "; filament start gcode\n"
-	],
+    ],
-	"long_retractions_when_ec": [
+    "filament_end_gcode": [
-		"1",
+        "; filament end gcode \n"
-		"1"
+    ]
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json

@@ -1,134 +1,99 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2D 0.8 nozzle",
+    "name": "Bambu ABS @BBL H2D 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_13",
+    "setting_id": "GFSB00_13",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "25",
-		"nil"
+        "35"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"25",
+        "0.4",
-		"35"
+        "0.4"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_wipe": [
-		"-1",
+        "1",
-		"-1"
+        "1"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_wipe_distance": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_prime_volume": [
-		"nil",
+        "30"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retraction_length": [
+        "4"
-		"0.4",
+    ],
-		"0.4"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1319"
-	],
+    ],
-	"filament_retraction_speed": [
+    "hole_limit_max": [
-		"nil",
+        "0.1319"
-		"nil"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe": [
+        "0.1119"
-		"1",
+    ],
-		"1"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_wipe_distance": [
+    ],
-		"1",
+    "nozzle_temperature": [
-		"1"
+        "260",
-	],
+        "260"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "slow_down_layer_time": [
-		"Spiral Lift"
+        "12"
-	],
+    ],
-	"filament_extruder_variant": [
+    "slow_down_min_speed": [
-		"Direct Drive Standard",
+        "20",
-		"Direct Drive High Flow"
+        "20"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "compatible_printers": [
-		"0",
+        "Bambu Lab H2D 0.8 nozzle"
-		"0"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_ramming_travel_time": [
+        "; filament start gcode\n"
-		"0",
+    ],
-		"0"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_adaptive_volumetric_speed": [
+    ]
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json

@@ -1,134 +1,109 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2D",
+    "name": "Bambu ABS @BBL H2D",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_11",
+    "setting_id": "GFSB00_11",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"20",
+        "20",
-		"35"
+        "35",
-	],
+        "20"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_retraction_length": [
-		"nil"
+        "0.4",
-	],
+        "0.4",
-	"filament_retract_when_changing_layer": [
+        "0.4"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_wipe_distance": [
-	"filament_retraction_length": [
+        "1",
-		"0.4",
+        "1",
-		"0.4"
+        "1"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift",
-	],
+        "Spiral Lift"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "-0.0008"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1319"
-		"1"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_wipe_distance": [
+        "0.1319"
-		"1",
+    ],
-		"1"
+    "hole_limit_min": [
-	],
+        "0.1119"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "nozzle_temperature": [
-		"Spiral Lift",
+        "270",
-		"Spiral Lift"
+        "270",
-	],
+        "270"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature_initial_layer": [
-		"Direct Drive High Flow"
+        "260",
-	],
+        "260",
-	"filament_pre_cooling_temperature": [
+        "260"
-		"0",
+    ],
-		"0"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"filament_ramming_travel_time": [
+    ],
-		"0",
+    "slow_down_min_speed": [
-		"0"
+        "20",
-	],
+        "20",
-	"filament_adaptive_volumetric_speed": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D 0.4 nozzle"
-	"long_retractions_when_ec": [
+    ],
-		"1",
+    "filament_start_gcode": [
-		"1"
+        "; filament start gcode\n"
-	],
+    ],
-	"nozzle_temperature": [
+    "filament_end_gcode": [
-		"270",
+        "; filament end gcode \n"
-		"270"
+    ]
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.2 nozzle.json

@@ -1,134 +1,53 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2DP 0.2 nozzle",
+    "name": "Bambu ABS @BBL H2DP 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_17",
+    "setting_id": "GFSB00_17",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "2",
-		"0.95"
+        "2"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_long_retractions_when_cut": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_max_volumetric_speed": [
+        "260",
-		"2",
+        "260"
-		"2"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_ramming_volumetric_speed": [
+        "12"
-		"-1",
+    ],
-		"-1"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retract_before_wipe": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D Pro 0.2 nozzle"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "filament_end_gcode": [
-		"nil",
+        "; filament end gcode \n"
-		"nil"
+    ]
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.6 nozzle.json

@@ -1,134 +1,69 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2DP 0.6 nozzle",
+    "name": "Bambu ABS @BBL H2DP 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_31",
+    "setting_id": "GFSB00_31",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "25",
-		"0.95"
+        "35"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"35"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_distances_when_cut": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"0.4",
+    ],
-		"0.4"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D Pro 0.6 nozzle"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_retraction_speed": [
+    "filament_end_gcode": [
-		"nil",
+        "; filament end gcode \n"
-		"nil"
+    ]
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.8 nozzle.json

@@ -1,134 +1,69 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2DP 0.8 nozzle",
+    "name": "Bambu ABS @BBL H2DP 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_18",
+    "setting_id": "GFSB00_18",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "25",
-		"0.95"
+        "35"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"35"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_restart_extra": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_distances_when_cut": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"0.4",
+    ],
-		"0.4"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D Pro 0.8 nozzle"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_retraction_speed": [
+    "filament_end_gcode": [
-		"nil",
+        "; filament end gcode \n"
-		"nil"
+    ]
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP.json

@@ -1,134 +1,69 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2DP",
+    "name": "Bambu ABS @BBL H2DP",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_16",
+    "setting_id": "GFSB00_16",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "20",
-		"0.95"
+        "30"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"20",
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_distances_when_cut": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"0.4",
+    ],
-		"0.4"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D Pro 0.4 nozzle"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_retraction_speed": [
+    "filament_end_gcode": [
-		"nil",
+        "; filament end gcode \n"
-		"nil"
+    ]
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.2 nozzle.json

@@ -1,143 +1,104 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2S 0.2 nozzle",
+    "name": "Bambu ABS @BBL H2S 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_25",
+    "setting_id": "GFSB00_25",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"fan_min_speed": [
+    "counter_coef_3": [
-		"40"
+        "0.0241"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "fan_max_speed": [
-	],
+        "60"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_min_speed": [
-		"0"
+        "40"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"3",
+        "10",
-		"3"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_flush_volumetric_speed": [
-		"nil",
+        "3",
-		"nil"
+        "3"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retract_restart_extra": [
+        "4"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_retract_when_changing_layer": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1319"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "hole_limit_min": [
-		"nil",
+        "0.1119"
-		"nil"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_retraction_length": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "long_retractions_when_ec": [
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_wipe_distance": [
+    ],
-		"nil",
+    "overhang_fan_speed": [
-		"nil"
+        "100"
-	],
+    ],
-	"filament_z_hop": [
+    "pre_start_fan_time": [
-		"nil",
+        "2"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_z_hop_types": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_extruder_variant": [
+        "12"
-		"Direct Drive Standard",
+    ],
-		"Direct Drive High Flow"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_pre_cooling_temperature": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2S 0.2 nozzle"
-	"filament_ramming_travel_time": [
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_end_gcode": [
-		"0",
+        "; filament end gcode \n"
-		"0"
+    ]
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.6 nozzle.json

@@ -1,140 +1,125 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2S 0.6 nozzle",
+    "name": "Bambu ABS @BBL H2S 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_33",
+    "setting_id": "GFSB00_33",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_min": [
-	"filament_flow_ratio": [
+        "0.0241"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.3341"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"35"
+        "35",
-	],
+        "25"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4",
-	],
+        "0.4"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_wipe": [
-		"nil"
+        "1",
-	],
+        "1",
-	"filament_retract_when_changing_layer": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retraction_length": [
+        "Spiral Lift",
-		"0.4",
+        "Spiral Lift",
-		"0.4"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "-0.0008"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1319"
-		"1"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe_distance": [
+        "0.1119"
-		"1",
+    ],
-		"1"
+    "hole_limit_max": [
-	],
+        "0.1319"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "long_retractions_when_ec": [
-		"Spiral Lift",
+        "0",
-		"Spiral Lift"
+        "0",
-	],
+        "0"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_pre_cooling_temperature": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "260",
-	"filament_ramming_travel_time": [
+        "260",
-		"0",
+        "260"
-		"0"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_adaptive_volumetric_speed": [
+        "100"
-		"0",
+    ],
-		"0"
+    "pre_start_fan_time": [
-	],
+        "2"
-	"long_retractions_when_ec": [
+    ],
-		"0",
+    "retraction_distances_when_ec": [
-		"0"
+        "0",
-	],
+        "0",
-	"nozzle_temperature": [
+        "0"
-		"270",
+    ],
-		"270"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"nozzle_temperature_initial_layer": [
+    ],
-		"260",
+    "slow_down_min_speed": [
-		"260"
+        "20",
-	],
+        "20",
-	"overhang_fan_speed": [
+        "20"
-		"100"
+    ],
-	],
+    "compatible_printers": [
-	"pre_start_fan_time": [
+        "Bambu Lab H2S 0.6 nozzle"
-		"2"
+    ],
-	],
+    "filament_start_gcode": [
-	"retraction_distances_when_ec": [
+        "; filament start gcode\n"
-		"0",
+    ],
-		"0"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"slow_down_layer_time": [
+    ]
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.8 nozzle.json

@@ -1,140 +1,113 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2S 0.8 nozzle",
+    "name": "Bambu ABS @BBL H2S 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_32",
+    "setting_id": "GFSB00_32",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_min": [
-	"filament_flow_ratio": [
+        "0.0241"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.3341"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "25",
-		"nil"
+        "35"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"25",
+        "0.4",
-		"35"
+        "0.4"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_wipe": [
-		"-1",
+        "1",
-		"-1"
+        "1"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_wipe_distance": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_prime_volume": [
-		"nil",
+        "30"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retract_when_changing_layer": [
+        "Spiral Lift",
-		"nil",
+        "Spiral Lift"
-		"nil"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_retraction_distances_when_cut": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retraction_length": [
+        "4"
-		"0.4",
+    ],
-		"0.4"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1319"
-	],
+    ],
-	"filament_retraction_speed": [
+    "hole_limit_min": [
-		"nil",
+        "0.1119"
-		"nil"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_wipe": [
+        "0.1319"
-		"1",
+    ],
-		"1"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_wipe_distance": [
+    ],
-		"1",
+    "long_retractions_when_ec": [
-		"1"
+        "0",
-	],
+        "0"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "nozzle_temperature_initial_layer": [
-		"Spiral Lift"
+        "260",
-	],
+        "260"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "overhang_fan_speed": [
-		"Direct Drive High Flow"
+        "100"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "pre_start_fan_time": [
-		"0",
+        "2"
-		"0"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_ramming_travel_time": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_adaptive_volumetric_speed": [
+        "12"
-		"0",
+    ],
-		"0"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"long_retractions_when_ec": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2S 0.8 nozzle"
-	"nozzle_temperature": [
+    ],
-		"270",
+    "filament_start_gcode": [
-		"270"
+        "; filament start gcode\n"
-	],
+    ],
-	"nozzle_temperature_initial_layer": [
+    "filament_end_gcode": [
-		"260",
+        "; filament end gcode \n"
-		"260"
+    ]
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2S.json

@@ -1,140 +1,125 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL H2S",
+    "name": "Bambu ABS @BBL H2S",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_24",
+    "setting_id": "GFSB00_24",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_min": [
-	"filament_flow_ratio": [
+        "0.0241"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.3341"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"20",
+        "20",
-		"35"
+        "35",
-	],
+        "20"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4",
-	],
+        "0.4"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_wipe": [
-		"nil"
+        "1",
-	],
+        "1",
-	"filament_retract_when_changing_layer": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retraction_length": [
+        "Spiral Lift",
-		"0.4",
+        "Spiral Lift",
-		"0.4"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "-0.0008"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1319"
-		"1"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe_distance": [
+        "0.1119"
-		"1",
+    ],
-		"1"
+    "hole_limit_max": [
-	],
+        "0.1319"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "long_retractions_when_ec": [
-		"Spiral Lift",
+        "0",
-		"Spiral Lift"
+        "0",
-	],
+        "0"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_pre_cooling_temperature": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "260",
-	"filament_ramming_travel_time": [
+        "260",
-		"0",
+        "260"
-		"0"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_adaptive_volumetric_speed": [
+        "100"
-		"0",
+    ],
-		"0"
+    "pre_start_fan_time": [
-	],
+        "2"
-	"long_retractions_when_ec": [
+    ],
-		"0",
+    "retraction_distances_when_ec": [
-		"0"
+        "0",
-	],
+        "0",
-	"nozzle_temperature": [
+        "0"
-		"270",
+    ],
-		"270"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"nozzle_temperature_initial_layer": [
+    ],
-		"260",
+    "slow_down_min_speed": [
-		"260"
+        "20",
-	],
+        "20",
-	"overhang_fan_speed": [
+        "20"
-		"100"
+    ],
-	],
+    "compatible_printers": [
-	"pre_start_fan_time": [
+        "Bambu Lab H2S 0.4 nozzle"
-		"2"
+    ],
-	],
+    "filament_start_gcode": [
-	"retraction_distances_when_ec": [
+        "; filament start gcode\n"
-		"0",
+    ],
-		"0"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"slow_down_layer_time": [
+    ]
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.4 nozzle.json

@@ -0,0 +1,72 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL P1S 0.4 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_38",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.6 nozzle.json

@@ -0,0 +1,72 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL P1S 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_39",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.6 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.2 nozzle.json

@@ -1,174 +1,93 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL P2S 0.2 nozzle",
+    "name": "Bambu ABS @BBL P2S 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_14",
+    "setting_id": "GFSB00_14",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_min_speed": [
+    "counter_coef_2": [
-		"40"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_min_speed": [
-		"0"
+        "40"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"3",
+        "10",
-		"3"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_flush_volumetric_speed": [
-		"nil",
+        "3",
-		"nil"
+        "3"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "filament_retraction_distances_when_cut": [
-		"-1",
+        "10",
-		"-1"
+        "10"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "hole_coef_2": [
-		"nil",
+        "-0.0008"
-		"nil"
+    ],
-	],
+    "hole_coef_3": [
-	"filament_retract_restart_extra": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "hole_limit_max": [
-	],
+        "0.1319"
-	"filament_retract_when_changing_layer": [
+    ],
-		"nil",
+    "hole_limit_min": [
-		"nil"
+        "0.1119"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "include": [
-		"10",
+        "fdm_filament_template_direct_dual"
-		"10"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_retraction_length": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retraction_minimum_travel": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retraction_speed": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_wipe_distance": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_z_hop": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab P2S 0.2 nozzle"
-	"filament_z_hop_types": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.6 nozzle.json

@@ -1,174 +1,105 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL P2S 0.6 nozzle",
+    "name": "Bambu ABS @BBL P2S 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_36",
+    "setting_id": "GFSB00_36",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "chamber_temperatures": [
-		"0"
+        "65"
-	],
+    ],
-	"chamber_temperatures": [
+    "counter_coef_2": [
-		"65"
+        "0.0124"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_3": [
-		"60"
+        "0.0241"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "fan_max_speed": [
-	],
+        "60"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "filament_cooling_before_tower": [
-		"0"
+        "10",
-	],
+        "10",
-	"filament_flush_volumetric_speed": [
+        "10"
-		"0",
+    ],
-		"0"
+    "filament_max_volumetric_speed": [
-	],
+        "16",
-	"filament_long_retractions_when_cut": [
+        "35",
-		"nil",
+        "16"
-		"nil"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_max_volumetric_speed": [
+        "10",
-		"16",
+        "10",
-		"35"
+        "10"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_retraction_length": [
-		"-1",
+        "0.4",
-		"-1"
+        "0.4",
-	],
+        "0.4"
-	"filament_ramming_volumetric_speed_nc": [
+    ],
-		"-1",
+    "filament_z_hop_types": [
-		"-1"
+        "Spiral Lift",
-	],
+        "Spiral Lift",
-	"filament_retract_before_wipe": [
+        "Spiral Lift"
-		"nil",
+    ],
-		"nil"
+    "filament_ramming_travel_time": [
-	],
+        "0",
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "hole_coef_2": [
-	"filament_retract_when_changing_layer": [
+        "-0.0008"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_3": [
-	],
+        "0.1319"
-	"filament_retraction_distances_when_cut": [
+    ],
-		"10",
+    "hole_limit_min": [
-		"10"
+        "0.1119"
-	],
+    ],
-	"filament_retraction_length": [
+    "hole_limit_max": [
-		"0.4",
+        "0.1319"
-		"0.4"
+    ],
-	],
+    "include": [
-	"filament_retraction_minimum_travel": [
+        "fdm_filament_template_direct_dual_e3d"
-		"nil",
+    ],
-		"nil"
+    "long_retractions_when_ec": [
-	],
+        "0",
-	"filament_retraction_speed": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_wipe": [
+        "270",
-		"nil",
+        "270",
-		"nil"
+        "270"
-	],
+    ],
-	"filament_wipe_distance": [
+    "nozzle_temperature_initial_layer": [
-		"nil",
+        "260",
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "retraction_distances_when_ec": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_z_hop_types": [
+        "0"
-		"Spiral Lift",
+    ],
-		"Spiral Lift"
+    "slow_down_layer_time": [
-	],
+        "12"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "slow_down_min_speed": [
-		"Direct Drive High Flow"
+        "20",
-	],
+        "20",
-	"filament_pre_cooling_temperature": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab P2S 0.6 nozzle"
-	"filament_pre_cooling_temperature_nc": [
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.8 nozzle.json

@@ -1,177 +1,93 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL P2S 0.8 nozzle",
+    "name": "Bambu ABS @BBL P2S 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_15",
+    "setting_id": "GFSB00_15",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.3341"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "0.0241"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "18",
-		"nil"
+        "35"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"18",
+        "0",
-		"35"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_retraction_distances_when_cut": [
-		"-1",
+        "10",
-		"-1"
+        "10"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "filament_retraction_length": [
-		"-1",
+        "0.4",
-		"-1"
+        "0.4"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "hole_coef_2": [
-		"nil",
+        "-0.0008"
-		"nil"
+    ],
-	],
+    "hole_coef_3": [
-	"filament_retract_when_changing_layer": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "hole_limit_max": [
-	],
+        "0.1319"
-	"filament_retraction_distances_when_cut": [
+    ],
-		"10",
+    "hole_limit_min": [
-		"10"
+        "0.1119"
-	],
+    ],
-	"filament_retraction_length": [
+    "include": [
-		"0.4",
+        "fdm_filament_template_direct_dual"
-		"0.4"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_retraction_minimum_travel": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retraction_speed": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_wipe": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_wipe_distance": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_z_hop": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab P2S 0.8 nozzle"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "filament_start_gcode": [
-		"Spiral Lift"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL P2S.json

@@ -1,174 +1,108 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL P2S",
+    "name": "Bambu ABS @BBL P2S",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_10",
+    "setting_id": "GFSB00_10",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_coef_2": [
-		"60"
+        "0.0124"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_3": [
-		"nil",
+        "0.0241"
-		"nil"
+    ],
-	],
+    "counter_limit_min": [
-	"filament_flow_ratio": [
+        "0.0241"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.3341"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "fan_max_speed": [
-		"0"
+        "60"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10",
-	],
+        "10"
-	"filament_long_retractions_when_cut": [
+    ],
-		"nil",
+    "filament_max_volumetric_speed": [
-		"nil"
+        "16",
-	],
+        "25",
-	"filament_max_volumetric_speed": [
+        "16"
-		"16",
+    ],
-		"25"
+    "filament_retraction_distances_when_cut": [
-	],
+        "10",
-	"filament_ramming_volumetric_speed": [
+        "10",
-		"-1",
+        "10"
-		"-1"
+    ],
-	],
+    "filament_retraction_length": [
-	"filament_ramming_volumetric_speed_nc": [
+        "0.4",
-		"-1",
+        "0.4",
-		"-1"
+        "0.4"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift",
-	],
+        "Spiral Lift"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_retract_when_changing_layer": [
+        "0"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "-0.0008"
-	"filament_retraction_distances_when_cut": [
+    ],
-		"10",
+    "hole_coef_3": [
-		"10"
+        "0.1319"
-	],
+    ],
-	"filament_retraction_length": [
+    "hole_limit_min": [
-		"0.4",
+        "0.1119"
-		"0.4"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_retraction_minimum_travel": [
+        "0.1319"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual_e3d"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "long_retractions_when_ec": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_wipe": [
+        "0"
-		"nil",
+    ],
-		"nil"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_wipe_distance": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_z_hop": [
+        "260",
-		"nil",
+        "260",
-		"nil"
+        "260"
-	],
+    ],
-	"filament_z_hop_types": [
+    "retraction_distances_when_ec": [
-		"Spiral Lift",
+        "0",
-		"Spiral Lift"
+        "0",
-	],
+        "0"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "slow_down_layer_time": [
-		"Direct Drive High Flow"
+        "12"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "slow_down_min_speed": [
-		"0",
+        "20",
-		"0"
+        "20",
-	],
+        "20"
-	"filament_pre_cooling_temperature_nc": [
+    ],
-		"0",
+    "compatible_printers": [
-		"0"
+        "Bambu Lab P2S 0.4 nozzle"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_start_gcode": [
-		"0",
+        "; filament start gcode\n"
-		"0"
+    ]
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json

@@ -1,127 +1,58 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1C 0.2 nozzle",
+    "name": "Bambu ABS @BBL X1C 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_00",
+    "setting_id": "GFSB00_00",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_ramming_travel_time": [
-		"0.95",
+        "0",
-		"0.95"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "260",
-		"-1",
+        "260"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retract_restart_extra": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retract_when_changing_layer": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1 Carbon 0.2 nozzle",
-	"filament_retraction_length": [
+        "Bambu Lab X1 0.2 nozzle",
-		"nil",
+        "Bambu Lab P1S 0.2 nozzle"
-		"nil"
+    ]
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.2 nozzle",
-		"Bambu Lab X1 0.2 nozzle",
-		"Bambu Lab P1S 0.2 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.6 nozzle.json

@@ -0,0 +1,64 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL X1C 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_40",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.8"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json

@@ -1,130 +1,58 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1C 0.8 nozzle",
+    "name": "Bambu ABS @BBL X1C 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_01",
+    "setting_id": "GFSB00_01",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_ramming_travel_time": [
-		"0.95",
+        "0",
-		"0.95"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "nil"
-	],
+    ],
-	"filament_flush_temp": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_volumetric_speed": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_ramming_volumetric_speed": [
+        "260",
-		"-1",
+        "260"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retract_when_changing_layer": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1 Carbon 0.8 nozzle",
-	"filament_retraction_length": [
+        "Bambu Lab X1 0.8 nozzle",
-		"nil",
+        "Bambu Lab P1S 0.8 nozzle"
-		"nil"
+    ]
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab P1S 0.8 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json

@@ -1,130 +1,74 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1C",
+    "name": "Bambu ABS @BBL X1C",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00",
+    "setting_id": "GFSB00",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_deretraction_speed": [
-		"1",
+        "nil",
-		"1"
+        "40"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_long_retractions_when_cut": [
-		"16",
+        "1",
-		"16"
+        "nil"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "16",
-		"18"
+        "25"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_distances_when_cut": [
-		"0.95",
+        "18",
-		"0.95"
+        "nil"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_speed": [
-		"0",
+        "nil",
-		"0"
+        "40"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_z_hop": [
-		"0",
+        "nil",
-		"0"
+        "0.6"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_when_changing_layer": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retraction_length": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retraction_minimum_travel": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_speed": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_wipe": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1 Carbon 0.4 nozzle",
-	"filament_wipe_distance": [
+        "Bambu Lab X1 0.4 nozzle",
-		"nil",
+        "Bambu Lab X1 0.6 nozzle"
-		"nil"
+    ]
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json

@@ -1,125 +1,56 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1E 0.2 nozzle",
+    "name": "Bambu ABS @BBL X1E 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_05",
+    "setting_id": "GFSB00_05",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "2",
-		"0.95"
+        "2"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "include": [
-		"1",
+        "fdm_filament_template_direct_dual"
-		"1"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_max_volumetric_speed": [
+        "0",
-		"2",
+        "0"
-		"2"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retract_when_changing_layer": [
+        "12"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retraction_distances_when_cut": [
+        "20"
-		"18",
+    ],
-		"18"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1E 0.2 nozzle"
-	"filament_retraction_length": [
+    ]
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.2 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json

@@ -1,128 +1,56 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1E 0.8 nozzle",
+    "name": "Bambu ABS @BBL X1E 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_06",
+    "setting_id": "GFSB00_06",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_retraction_length": [
-		"1",
+        "0.4",
-		"1"
+        "nil"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "include": [
-		"18",
+        "fdm_filament_template_direct_dual"
-		"18"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_ramming_volumetric_speed": [
+        "0",
-		"-1",
+        "0"
-		"-1"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_before_wipe": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_restart_extra": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_when_changing_layer": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_distances_when_cut": [
+        "12"
-		"18",
+    ],
-		"18"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1E 0.8 nozzle"
-	"filament_retraction_length": [
+    ]
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.8 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json

@@ -1,126 +1,61 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X1E",
+    "name": "Bambu ABS @BBL X1E",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_04",
+    "setting_id": "GFSB00_04",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "16",
-		"0.95"
+        "16"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "nil"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_ramming_travel_time": [
-		"1",
+        "0",
-		"1"
+        "0"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "include": [
-		"16",
+        "fdm_filament_template_direct_dual"
-		"16"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_ramming_volumetric_speed": [
+        "0",
-		"-1",
+        "0"
-		"-1"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_restart_extra": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_when_changing_layer": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_layer_time": [
-	"filament_retraction_distances_when_cut": [
+        "12"
-		"18",
+    ],
-		"18"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1E 0.4 nozzle",
-	"filament_retraction_minimum_travel": [
+        "Bambu Lab X1E 0.6 nozzle"
-		"nil",
+    ]
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.2 nozzle.json

@@ -1,299 +1,134 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X2D 0.2 nozzle",
+    "name": "Bambu ABS @BBL X2D 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_20",
+    "setting_id": "GFSB00_20",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0124"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "0.0241"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.3341"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil",
+    ],
-		"nil",
+    "fan_min_speed": [
-		"nil"
+        "80"
-	],
+    ],
-	"filament_enable_overhang_speed": [
+    "filament_cooling_before_tower": [
-		"1",
+        "10",
-		"1",
+        "10",
-		"1",
+        "10",
-		"1"
+        "10"
-	],
+    ],
-	"filament_extruder_variant": [
+    "filament_extruder_compatibility": [
-		"Direct Drive Standard",
+        "24"
-		"Direct Drive High Flow",
+    ],
-		"Bowden Standard",
+    "filament_flow_ratio": [
-		"Bowden High Flow"
+        "0.95",
-	],
+        "0.95",
-	"filament_flush_temp": [
+        "0.95",
-		"0",
+        "0.95"
-		"0",
+    ],
-		"0",
+    "filament_flush_volumetric_speed": [
-		"0"
+        "3",
-	],
+        "3",
-	"filament_flush_volumetric_speed": [
+        "3",
-		"3",
+        "3"
-		"3",
+    ],
-		"3",
+    "filament_max_volumetric_speed": [
-		"3"
+        "2",
-	],
+        "2",
-	"filament_long_retractions_when_cut": [
+        "2",
-		"nil",
+        "2"
-		"nil",
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_overhang_1_4_speed": [
+        "0",
-		"0",
+        "0"
-		"0",
+    ],
-		"0",
+    "filament_retraction_distances_when_cut": [
-		"0"
+        "10",
-	],
+        "10",
-	"filament_overhang_2_4_speed": [
+        "10",
-		"50",
+        "10"
-		"50",
+    ],
-		"50",
+    "filament_tower_interface_print_temp": [
-		"50"
+        "270"
-	],
+    ],
-	"filament_overhang_3_4_speed": [
+    "filament_wipe": [
-		"30",
+        "1",
-		"30",
+        "nil",
-		"30",
+        "1",
-		"30"
+        "nil"
-	],
+    ],
-	"filament_overhang_4_4_speed": [
+    "filament_wipe_distance": [
-		"10",
+        "1",
-		"10",
+        "nil",
-		"10",
+        "1",
-		"10"
+        "nil"
-	],
+    ],
-	"filament_overhang_totally_speed": [
+    "filament_z_hop_types": [
-		"10",
+        "Spiral Lift",
-		"10",
+        "nil",
-		"10",
+        "Spiral Lift",
-		"10"
+        "nil"
-	],
+    ],
-	"filament_bridge_speed": [
+    "hole_coef_2": [
-		"25",
+        "-0.0008"
-		"25",
+    ],
-		"25",
+    "hole_coef_3": [
-		"25"
+        "0.1319"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "hole_limit_max": [
-		"0",
+        "0.1319"
-		"0",
+    ],
-		"0",
+    "hole_limit_min": [
-		"0"
+        "0.1119"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_bowden"
-		"0",
+    ],
-		"0",
+    "nozzle_temperature": [
-		"0"
+        "270",
-	],
+        "270",
-	"filament_ramming_travel_time_nc": [
+        "270",
-		"0",
+        "270"
-		"0",
+    ],
-		"0",
+    "nozzle_temperature_initial_layer": [
-		"0"
+        "260",
-	],
+        "260",
-	"filament_retract_length_nc": [
+        "260",
-		"14",
+        "260"
-		"14",
+    ],
-		"14",
+    "retraction_distances_when_ec": [
-		"14"
+        "3",
-	],
+        "3",
-	"filament_ramming_volumetric_speed": [
+        "4",
-		"-1",
+        "4"
-		"-1",
+    ],
-		"-1",
+    "slow_down_layer_time": [
-		"-1"
+        "12"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "slow_down_min_speed": [
-		"-1",
+        "20",
-		"-1",
+        "20",
-		"-1",
+        "20",
-		"-1"
+        "20"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab X2D 0.2 nozzle"
-		"nil",
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2",
-		"2",
-		"2"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.4 nozzle.json

@@ -1,299 +1,163 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X2D 0.4 nozzle",
+    "name": "Bambu ABS @BBL X2D 0.4 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_09",
+    "setting_id": "GFSB00_09",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0124"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "0.0241"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.3341"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil",
+    ],
-		"nil",
+    "fan_max_speed": [
-		"nil"
+        "60"
-	],
+    ],
-	"filament_enable_overhang_speed": [
+    "filament_cooling_before_tower": [
-		"1",
+        "10",
-		"1",
+        "10",
-		"1",
+        "10",
-		"1"
+        "10",
-	],
+        "10",
-	"filament_extruder_variant": [
+        "10"
-		"Direct Drive Standard",
+    ],
-		"Direct Drive High Flow",
+    "filament_extruder_compatibility": [
-		"Bowden Standard",
+        "24"
-		"Bowden High Flow"
+    ],
-	],
+    "filament_flow_ratio": [
-	"filament_flush_temp": [
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95",
-		"0"
+        "0.95",
-	],
+        "0.95"
-	"filament_flush_volumetric_speed": [
+    ],
-		"0",
+    "filament_max_volumetric_speed": [
-		"0",
+        "16",
-		"0",
+        "25",
-		"0"
+        "16",
-	],
+        "16",
-	"filament_long_retractions_when_cut": [
+        "18",
-		"nil",
+        "16"
-		"nil",
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_overhang_1_4_speed": [
+        "0",
-		"0",
+        "0",
-		"0",
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_overhang_2_4_speed": [
+        "10",
-		"50",
+        "10",
-		"50",
+        "10",
-		"50",
+        "10",
-		"50"
+        "10",
-	],
+        "10"
-	"filament_overhang_3_4_speed": [
+    ],
-		"30",
+    "filament_retraction_length": [
-		"30",
+        "0.4",
-		"30",
+        "0.4",
-		"30"
+        "0.4",
-	],
+        "nil",
-	"filament_overhang_4_4_speed": [
+        "nil",
-		"10",
+        "nil"
-		"10",
+    ],
-		"10",
+    "filament_tower_interface_print_temp": [
-		"10"
+        "270"
-	],
+    ],
-	"filament_overhang_totally_speed": [
+    "filament_wipe": [
-		"10",
+        "1",
-		"10",
+        "1",
-		"10",
+        "1",
-		"10"
+        "1",
-	],
+        "1",
-	"filament_bridge_speed": [
+        "1"
-		"25",
+    ],
-		"25",
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"25"
+        "1",
-	],
+        "1",
-	"filament_pre_cooling_temperature": [
+        "1",
-		"0",
+        "1",
-		"0",
+        "1"
-		"0",
+    ],
-		"0"
+    "filament_z_hop_types": [
-	],
+        "Spiral Lift",
-	"filament_pre_cooling_temperature_nc": [
+        "Spiral Lift",
-		"0",
+        "Spiral Lift",
-		"0",
+        "Spiral Lift",
-		"0",
+        "Spiral Lift",
-		"0"
+        "Spiral Lift"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "hole_coef_2": [
-		"0",
+        "-0.0008"
-		"0",
+    ],
-		"0",
+    "hole_coef_3": [
-		"0"
+        "0.1319"
-	],
+    ],
-	"filament_retract_length_nc": [
+    "hole_limit_max": [
-		"14",
+        "0.1319"
-		"14",
+    ],
-		"14",
+    "hole_limit_min": [
-		"14"
+        "0.1119"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "include": [
-		"-1",
+        "fdm_filament_template_direct_bowden_e3d"
-		"-1",
+    ],
-		"-1",
+    "nozzle_temperature": [
-		"-1"
+        "270",
-	],
+        "270",
-	"filament_ramming_volumetric_speed_nc": [
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "260",
-		"nil",
+        "260",
-		"nil",
+        "260",
-		"nil",
+        "260",
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "retraction_distances_when_ec": [
-		"nil",
+        "3",
-		"nil",
+        "3",
-		"nil"
+        "3",
-	],
+        "4",
-	"filament_retract_when_changing_layer": [
+        "4",
-		"nil",
+        "4"
-		"nil",
+    ],
-		"nil",
+    "slow_down_layer_time": [
-		"nil"
+        "12"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10",
+        "20",
-		"10",
+        "20",
-		"10"
+        "20",
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"0.4",
+    ],
-		"0.4",
+    "temperature_vitrification": [
-		"nil",
+        "100"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_minimum_travel": [
+        "Bambu Lab X2D 0.4 nozzle"
-		"nil",
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ]
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"25",
-		"16",
-		"18"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.8 nozzle.json

@@ -1,299 +1,134 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X2D 0.8 nozzle",
+    "name": "Bambu ABS @BBL X2D 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_30",
+    "setting_id": "GFSB00_30",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0124"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "0.0241"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.3341"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil",
+    ],
-		"nil",
+    "fan_max_speed": [
-		"nil"
+        "60"
-	],
+    ],
-	"filament_enable_overhang_speed": [
+    "filament_cooling_before_tower": [
-		"1",
+        "10",
-		"1",
+        "10",
-		"1",
+        "10",
-		"1"
+        "10"
-	],
+    ],
-	"filament_extruder_variant": [
+    "filament_extruder_compatibility": [
-		"Direct Drive Standard",
+        "24"
-		"Direct Drive High Flow",
+    ],
-		"Bowden Standard",
+    "filament_flow_ratio": [
-		"Bowden High Flow"
+        "0.95",
-	],
+        "0.95",
-	"filament_flush_temp": [
+        "0.95",
-		"0",
+        "0.95"
-		"0",
+    ],
-		"0",
+    "filament_max_volumetric_speed": [
-		"0"
+        "16",
-	],
+        "35",
-	"filament_flush_volumetric_speed": [
+        "16",
-		"0",
+        "16"
-		"0",
+    ],
-		"0",
+    "filament_ramming_travel_time": [
-		"0"
+        "0",
-	],
+        "0",
-	"filament_long_retractions_when_cut": [
+        "0",
-		"nil",
+        "0"
-		"nil",
+    ],
-		"nil",
+    "filament_retraction_distances_when_cut": [
-		"nil"
+        "10",
-	],
+        "10",
-	"filament_overhang_1_4_speed": [
+        "10",
-		"0",
+        "10"
-		"0",
+    ],
-		"0",
+    "filament_retraction_length": [
-		"0"
+        "0.4",
-	],
+        "nil",
-	"filament_overhang_2_4_speed": [
+        "nil",
-		"50",
+        "nil"
-		"50",
+    ],
-		"50",
+    "filament_tower_interface_print_temp": [
-		"50"
+        "270"
-	],
+    ],
-	"filament_overhang_3_4_speed": [
+    "filament_wipe": [
-		"30",
+        "1",
-		"30",
+        "nil",
-		"30",
+        "1",
-		"30"
+        "nil"
-	],
+    ],
-	"filament_overhang_4_4_speed": [
+    "filament_wipe_distance": [
-		"10",
+        "1",
-		"10",
+        "nil",
-		"10",
+        "1",
-		"10"
+        "nil"
-	],
+    ],
-	"filament_overhang_totally_speed": [
+    "filament_z_hop_types": [
-		"10",
+        "Spiral Lift",
-		"10",
+        "nil",
-		"10",
+        "Spiral Lift",
-		"10"
+        "nil"
-	],
+    ],
-	"filament_bridge_speed": [
+    "hole_coef_2": [
-		"25",
+        "-0.0008"
-		"25",
+    ],
-		"25",
+    "hole_coef_3": [
-		"25"
+        "0.1319"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "hole_limit_max": [
-		"0",
+        "0.1319"
-		"0",
+    ],
-		"0",
+    "hole_limit_min": [
-		"0"
+        "0.1119"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_bowden"
-		"0",
+    ],
-		"0",
+    "nozzle_temperature": [
-		"0"
+        "270",
-	],
+        "270",
-	"filament_ramming_travel_time_nc": [
+        "270",
-		"0",
+        "270"
-		"0",
+    ],
-		"0",
+    "nozzle_temperature_initial_layer": [
-		"0"
+        "260",
-	],
+        "260",
-	"filament_retract_length_nc": [
+        "260",
-		"14",
+        "260"
-		"14",
+    ],
-		"14",
+    "retraction_distances_when_ec": [
-		"14"
+        "3",
-	],
+        "3",
-	"filament_ramming_volumetric_speed": [
+        "4",
-		"-1",
+        "4"
-		"-1",
+    ],
-		"-1",
+    "slow_down_layer_time": [
-		"-1"
+        "12"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "slow_down_min_speed": [
-		"-1",
+        "20",
-		"-1",
+        "20",
-		"-1",
+        "20",
-		"-1"
+        "20"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab X2D 0.8 nozzle"
-		"nil",
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"35",
-		"16",
-		"16"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X2D.json

@@ -1,299 +1,160 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @BBL X2D",
+    "name": "Bambu ABS @BBL X2D",
-	"inherits": "Bambu ABS @base",
+    "inherits": "Bambu ABS @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB00_19",
+    "setting_id": "GFSB00_19",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0124"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "0.0241"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.3341"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "0.0241"
-		"nil",
+    ],
-		"nil",
+    "fan_max_speed": [
-		"nil"
+        "60"
-	],
+    ],
-	"filament_enable_overhang_speed": [
+    "filament_cooling_before_tower": [
-		"1",
+        "10",
-		"1",
+        "10",
-		"1",
+        "10",
-		"1"
+        "10",
-	],
+        "10",
-	"filament_extruder_variant": [
+        "10"
-		"Direct Drive Standard",
+    ],
-		"Direct Drive High Flow",
+    "filament_extruder_compatibility": [
-		"Bowden Standard",
+        "24"
-		"Bowden High Flow"
+    ],
-	],
+    "filament_flow_ratio": [
-	"filament_flush_temp": [
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95",
-		"0"
+        "0.95",
-	],
+        "0.95"
-	"filament_flush_volumetric_speed": [
+    ],
-		"0",
+    "filament_max_volumetric_speed": [
-		"0",
+        "16",
-		"0",
+        "35",
-		"0"
+        "16",
-	],
+        "16",
-	"filament_long_retractions_when_cut": [
+        "16",
-		"nil",
+        "16"
-		"nil",
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_overhang_1_4_speed": [
+        "0",
-		"0",
+        "0",
-		"0",
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_overhang_2_4_speed": [
+        "10",
-		"50",
+        "10",
-		"50",
+        "10",
-		"50",
+        "10",
-		"50"
+        "10",
-	],
+        "10"
-	"filament_overhang_3_4_speed": [
+    ],
-		"30",
+    "filament_retraction_length": [
-		"30",
+        "0.4",
-		"30",
+        "nil",
-		"30"
+        "0.4",
-	],
+        "nil",
-	"filament_overhang_4_4_speed": [
+        "nil",
-		"10",
+        "nil"
-		"10",
+    ],
-		"10",
+    "filament_tower_interface_print_temp": [
-		"10"
+        "270"
-	],
+    ],
-	"filament_overhang_totally_speed": [
+    "filament_wipe": [
-		"10",
+        "1",
-		"10",
+        "nil",
-		"10",
+        "1",
-		"10"
+        "1",
-	],
+        "nil",
-	"filament_bridge_speed": [
+        "1"
-		"25",
+    ],
-		"25",
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"25"
+        "nil",
-	],
+        "1",
-	"filament_pre_cooling_temperature": [
+        "1",
-		"0",
+        "nil",
-		"0",
+        "1"
-		"0",
+    ],
-		"0"
+    "filament_z_hop_types": [
-	],
+        "Spiral Lift",
-	"filament_pre_cooling_temperature_nc": [
+        "nil",
-		"0",
+        "Spiral Lift",
-		"0",
+        "Spiral Lift",
-		"0",
+        "nil",
-		"0"
+        "Spiral Lift"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "hole_coef_2": [
-		"0",
+        "-0.0008"
-		"0",
+    ],
-		"0",
+    "hole_coef_3": [
-		"0"
+        "0.1319"
-	],
+    ],
-	"filament_retract_length_nc": [
+    "hole_limit_max": [
-		"14",
+        "0.1319"
-		"14",
+    ],
-		"14",
+    "hole_limit_min": [
-		"14"
+        "0.1119"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "include": [
-		"-1",
+        "fdm_filament_template_direct_bowden_e3d"
-		"-1",
+    ],
-		"-1",
+    "nozzle_temperature": [
-		"-1"
+        "270",
-	],
+        "270",
-	"filament_ramming_volumetric_speed_nc": [
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "260",
-		"nil",
+        "260",
-		"nil",
+        "260",
-		"nil",
+        "260",
-		"nil"
+        "260",
-	],
+        "260"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "retraction_distances_when_ec": [
-		"nil",
+        "3",
-		"nil",
+        "3",
-		"nil"
+        "3",
-	],
+        "4",
-	"filament_retract_when_changing_layer": [
+        "4",
-		"nil",
+        "4"
-		"nil",
+    ],
-		"nil",
+    "slow_down_layer_time": [
-		"nil"
+        "12"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10",
+        "20",
-		"10",
+        "20",
-		"10"
+        "20",
-	],
+        "20",
-	"filament_retraction_length": [
+        "20"
-		"0.4",
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab X2D 0.6 nozzle"
-		"nil"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_retraction_minimum_travel": [
+        "; filament start gcode\n"
-		"nil",
+    ]
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"35",
-		"16",
-		"16"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS @base.json

@@ -1,21 +1,21 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS @base",
+    "name": "Bambu ABS @base",
-	"inherits": "fdm_filament_abs",
+    "inherits": "fdm_filament_abs",
-	"from": "system",
+    "from": "system",
-	"filament_id": "OFhuaUQB",
+    "filament_id": "OFhuaUQB",
-	"instantiation": "false",
+    "instantiation": "false",
-	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
-	"filament_cost": [
+    "filament_cost": [
-		"24.99"
+        "15.99"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_flow_ratio": [
-		"0.95"
+        "0.95"
-	],
+    ],
-	"filament_vendor": [
+    "filament_vendor": [
-		"Bambu Lab"
+        "Bambu Lab"
-	],
+    ],
-	"impact_strength_z": [
+    "impact_strength_z": [
-		"7.4"
+        "7.4"
-	]
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json

@@ -1,19 +1,19 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL A1",
+    "name": "Bambu ABS-GF @BBL A1",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_02",
+    "setting_id": "GFSB50_02",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"compatible_printers": [
+    "compatible_printers": [
-		"Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle"
+        "Bambu Lab A1 0.8 nozzle"
-	]
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json

@@ -1,174 +1,86 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL H2C 0.4 nozzle",
+    "name": "Bambu ABS-GF @BBL H2C 0.4 nozzle",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_08",
+    "setting_id": "GFSB50_08",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10",
-	],
+        "10"
-	"filament_max_volumetric_speed": [
+    ],
-		"12",
+    "filament_max_volumetric_speed": [
-		"12"
+        "12",
-	],
+        "12",
-	"filament_prime_volume": [
+        "12"
-		"30"
+    ],
-	],
+    "filament_prime_volume": [
-	"filament_prime_volume_nc": [
+        "30"
-		"30"
+    ],
-	],
+    "filament_prime_volume_nc": [
-	"filament_pre_cooling_temperature_nc": [
+        "30"
-		"230",
+    ],
-		"230"
+    "filament_pre_cooling_temperature_nc": [
-	],
+        "230",
-	"filament_ramming_travel_time": [
+        "230",
-		"0",
+        "230"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_ramming_travel_time_nc": [
+        "0",
-		"1",
+        "0",
-		"1"
+        "0"
-	],
+    ],
-	"filament_change_length": [
+    "filament_ramming_travel_time_nc": [
-		"4"
+        "1",
-	],
+        "1",
-	"first_x_layer_fan_speed": [
+        "1"
-		"0"
+    ],
-	],
+    "filament_change_length": [
-	"filament_change_length_nc": [
+        "4"
-		"4"
+    ],
-	],
+    "first_x_layer_fan_speed": [
-	"filament_preheat_temperature_delta": [
+        "0"
-		"20",
+    ],
-		"20"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"filament_adaptive_volumetric_speed": [
+    ],
-		"0",
+    "filament_preheat_temperature_delta": [
-		"0"
+        "20",
-	],
+        "20",
-	"filament_deretraction_speed": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual_e3d"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_flush_temp": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "260",
-	"filament_flush_volumetric_speed": [
+        "260",
-		"0",
+        "260"
-		"0"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_flow_ratio": [
+        "20",
-		"0.95",
+        "20",
-		"0.95"
+        "20"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "temperature_vitrification": [
-		"nil",
+        "75"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_pre_cooling_temperature": [
+        "Bambu Lab H2C 0.4 nozzle"
-		"0",
+    ],
-		"0"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retract_length_nc": [
+    ],
-		"14",
+    "filament_end_gcode": [
-		"14"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C.json

@@ -1,175 +1,87 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL H2C",
+    "name": "Bambu ABS-GF @BBL H2C",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_09",
+    "setting_id": "GFSB50_09",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10",
-	],
+        "10"
-	"filament_max_volumetric_speed": [
+    ],
-		"12",
+    "filament_max_volumetric_speed": [
-		"12"
+        "12",
-	],
+        "12",
-	"filament_prime_volume": [
+        "12"
-		"30"
+    ],
-	],
+    "filament_prime_volume": [
-	"filament_prime_volume_nc": [
+        "30"
-		"30"
+    ],
-	],
+    "filament_prime_volume_nc": [
-	"filament_pre_cooling_temperature_nc": [
+        "30"
-		"230",
+    ],
-		"230"
+    "filament_pre_cooling_temperature_nc": [
-	],
+        "230",
-	"filament_ramming_travel_time": [
+        "230",
-		"0",
+        "230"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_ramming_travel_time_nc": [
+        "0",
-		"1",
+        "0",
-		"1"
+        "0"
-	],
+    ],
-	"filament_change_length": [
+    "filament_ramming_travel_time_nc": [
-		"4"
+        "1",
-	],
+        "1",
-	"first_x_layer_fan_speed": [
+        "1"
-		"0"
+    ],
-	],
+    "filament_change_length": [
-	"filament_change_length_nc": [
+        "4"
-		"4"
+    ],
-	],
+    "first_x_layer_fan_speed": [
-	"filament_preheat_temperature_delta": [
+        "0"
-		"20",
+    ],
-		"20"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"filament_adaptive_volumetric_speed": [
+    ],
-		"0",
+    "filament_preheat_temperature_delta": [
-		"0"
+        "20",
-	],
+        "20",
-	"filament_deretraction_speed": [
+        "20"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual_e3d"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_flush_temp": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "260",
-	"filament_flush_volumetric_speed": [
+        "260",
-		"0",
+        "260"
-		"0"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_flow_ratio": [
+        "20",
-		"0.95",
+        "20",
-		"0.95"
+        "20"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "temperature_vitrification": [
-		"nil",
+        "75"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_pre_cooling_temperature": [
+        "Bambu Lab H2C 0.6 nozzle",
-		"0",
+        "Bambu Lab H2C 0.8 nozzle"
-		"0"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_retract_length_nc": [
+        "; filament start gcode\n"
-		"14",
+    ],
-		"14"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_ramming_volumetric_speed": [
+    ]
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.6 nozzle",
-		"Bambu Lab H2C 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json

@@ -1,130 +1,61 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL H2D",
+    "name": "Bambu ABS-GF @BBL H2D",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_03",
+    "setting_id": "GFSB50_03",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
+    ],
-		"0.95",
+    "filament_max_volumetric_speed": [
-		"0.95"
+        "12",
-	],
+        "12",
-	"filament_flush_temp": [
+        "12"
-		"0",
+    ],
-		"0"
+    "filament_ramming_travel_time": [
-	],
+        "0",
-	"filament_flush_volumetric_speed": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_prime_volume": [
-	"filament_long_retractions_when_cut": [
+        "30"
-		"nil",
+    ],
-		"nil"
+    "filament_change_length": [
-	],
+        "4"
-	"filament_max_volumetric_speed": [
+    ],
-		"12",
+    "include": [
-		"12"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "nozzle_temperature": [
-		"-1",
+        "270",
-		"-1"
+        "270",
-	],
+        "270"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "260",
-	],
+        "260",
-	"filament_retract_restart_extra": [
+        "260"
-		"nil",
+    ],
-		"nil"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_retract_when_changing_layer": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_distances_when_cut": [
+        "Bambu Lab H2D 0.4 nozzle",
-		"nil",
+        "Bambu Lab H2D 0.6 nozzle",
-		"nil"
+        "Bambu Lab H2D 0.8 nozzle"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_retraction_minimum_travel": [
+        "; filament end gcode \n"
-		"nil",
+    ]
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2DP.json

@@ -1,130 +1,49 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL H2DP",
+    "name": "Bambu ABS-GF @BBL H2DP",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_05",
+    "setting_id": "GFSB50_05",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "12",
-		"0.95"
+        "12"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_long_retractions_when_cut": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_max_volumetric_speed": [
+        "260",
-		"12",
+        "260"
-		"12"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_ramming_volumetric_speed": [
+        "20",
-		"-1",
+        "20"
-		"-1"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_before_wipe": [
+        "Bambu Lab H2D Pro 0.4 nozzle",
-		"nil",
+        "Bambu Lab H2D Pro 0.6 nozzle",
-		"nil"
+        "Bambu Lab H2D Pro 0.8 nozzle"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_retract_when_changing_layer": [
+        "; filament end gcode \n"
-		"nil",
+    ]
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2S.json

@@ -1,130 +1,71 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL H2S",
+    "name": "Bambu ABS-GF @BBL H2S",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_10",
+    "setting_id": "GFSB50_10",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
+    ],
-		"0.95",
+    "filament_max_volumetric_speed": [
-		"0.95"
+        "12",
-	],
+        "12",
-	"filament_flush_temp": [
+        "12"
-		"0",
+    ],
-		"0"
+    "filament_prime_volume": [
-	],
+        "30"
-	"filament_flush_volumetric_speed": [
+    ],
-		"0",
+    "filament_ramming_travel_time": [
-		"0"
+        "0",
-	],
+        "0",
-	"filament_long_retractions_when_cut": [
+        "0"
-		"nil",
+    ],
-		"nil"
+    "filament_change_length": [
-	],
+        "4"
-	"filament_max_volumetric_speed": [
+    ],
-		"12",
+    "include": [
-		"12"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "long_retractions_when_ec": [
-		"-1",
+        "0",
-		"-1"
+        "0",
-	],
+        "0"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270",
-	"filament_retract_restart_extra": [
+        "270"
-		"nil",
+    ],
-		"nil"
+    "nozzle_temperature_initial_layer": [
-	],
+        "260",
-	"filament_retract_when_changing_layer": [
+        "260",
-		"nil",
+        "260"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retraction_distances_when_cut": [
+        "0",
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_retraction_length": [
+    "slow_down_min_speed": [
-		"nil",
+        "20",
-		"nil"
+        "20",
-	],
+        "20"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil"
+        "Bambu Lab H2S 0.4 nozzle",
-	],
+        "Bambu Lab H2S 0.6 nozzle",
-	"filament_retraction_speed": [
+        "Bambu Lab H2S 0.8 nozzle"
-		"nil",
+    ],
-		"nil"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_wipe": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json

@@ -1,121 +1,52 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL P1P",
+    "name": "Bambu ABS-GF @BBL P1P",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_01",
+    "setting_id": "GFSB50_01",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "12",
-		"18"
+        "12"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_distances_when_cut": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"12",
+        "0",
-		"12"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "260",
-		"-1",
+        "260"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_restart_extra": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_when_changing_layer": [
+        "Bambu Lab P1P 0.8 nozzle",
-		"nil",
+        "Bambu Lab P1P 0.6 nozzle",
-		"nil"
+        "Bambu Lab P1P 0.4 nozzle"
-	],
+    ]
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.4 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL P2S.json

@@ -1,170 +1,70 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL P2S",
+    "name": "Bambu ABS-GF @BBL P2S",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_04",
+    "setting_id": "GFSB50_04",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
+    ],
-		"0.95",
+    "filament_max_volumetric_speed": [
-		"0.95"
+        "12",
-	],
+        "12",
-	"filament_flush_temp": [
+        "12"
-		"0",
+    ],
-		"0"
+    "filament_ramming_travel_time": [
-	],
+        "0",
-	"filament_flush_volumetric_speed": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "include": [
-		"12",
+        "fdm_filament_template_direct_dual_e3d"
-		"12"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_ramming_volumetric_speed": [
+        "0",
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "nozzle_temperature": [
-		"-1",
+        "270",
-		"-1"
+        "270",
-	],
+        "270"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "260",
-	],
+        "260",
-	"filament_retract_restart_extra": [
+        "260"
-		"nil",
+    ],
-		"nil"
+    "retraction_distances_when_ec": [
-	],
+        "0",
-	"filament_retract_when_changing_layer": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_distances_when_cut": [
+        "20",
-		"10",
+        "20",
-		"10"
+        "20"
-	],
+    ],
-	"filament_retraction_length": [
+    "compatible_printers": [
-		"nil",
+        "Bambu Lab P2S 0.4 nozzle",
-		"nil"
+        "Bambu Lab P2S 0.6 nozzle",
-	],
+        "Bambu Lab P2S 0.8 nozzle"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json

@@ -1,130 +1,61 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL X1C",
+    "name": "Bambu ABS-GF @BBL X1C",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_00",
+    "setting_id": "GFSB50_00",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "12",
-		"18"
+        "12"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_distances_when_cut": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"12",
+        "0",
-		"12"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "260",
-		"-1",
+        "260"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_restart_extra": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_when_changing_layer": [
+        "Bambu Lab P1S 0.4 nozzle",
-		"nil",
+        "Bambu Lab P1S 0.6 nozzle",
-		"nil"
+        "Bambu Lab P1S 0.8 nozzle",
-	],
+        "Bambu Lab X1 0.4 nozzle",
-	"filament_retraction_length": [
+        "Bambu Lab X1 0.6 nozzle",
-		"nil",
+        "Bambu Lab X1 0.8 nozzle",
-		"nil"
+        "Bambu Lab X1 Carbon 0.4 nozzle",
-	],
+        "Bambu Lab X1 Carbon 0.6 nozzle",
-	"filament_retraction_minimum_travel": [
+        "Bambu Lab X1 Carbon 0.8 nozzle",
-		"nil",
+        "Bambu Lab X1E 0.4 nozzle",
-		"nil"
+        "Bambu Lab X1E 0.6 nozzle",
-	],
+        "Bambu Lab X1E 0.8 nozzle"
-	"filament_retraction_speed": [
+    ]
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json

@@ -1,266 +1,103 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL X2D 0.4 nozzle",
+    "name": "Bambu ABS-GF @BBL X2D 0.4 nozzle",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_06",
+    "setting_id": "GFSB50_06",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "60"
-		"0",
+    ],
-		"0",
+    "filament_cooling_before_tower": [
-		"0"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10",
-		"10",
+        "10",
-		"10",
+        "10",
-		"10",
+        "10"
-		"10"
+    ],
-	],
+    "filament_flow_ratio": [
-	"filament_deretraction_speed": [
+        "0.95",
-		"nil",
+        "0.95",
-		"nil",
+        "0.95",
-		"nil",
+        "0.95",
-		"nil"
+        "0.95",
-	],
+        "0.95"
-	"filament_enable_overhang_speed": [
+    ],
-		"1",
+    "filament_max_volumetric_speed": [
-		"1",
+        "12",
-		"1",
+        "12",
-		"1"
+        "12",
-	],
+        "12",
-	"filament_extruder_variant": [
+        "12",
-		"Direct Drive Standard",
+        "12"
-		"Direct Drive High Flow",
+    ],
-		"Bowden Standard",
+    "filament_ramming_travel_time": [
-		"Bowden High Flow"
+        "0",
-	],
+        "0",
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0",
-		"0",
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_flush_volumetric_speed": [
+        "10",
-		"0",
+        "10",
-		"0",
+        "10",
-		"0",
+        "10",
-		"0"
+        "10",
-	],
+        "10"
-	"filament_long_retractions_when_cut": [
+    ],
-		"nil",
+    "filament_retraction_length": [
-		"nil",
+        "1",
-		"nil",
+        "1",
-		"nil"
+        "1",
-	],
+        "nil",
-	"filament_overhang_1_4_speed": [
+        "nil",
-		"0",
+        "nil"
-		"0",
+    ],
-		"0",
+    "filament_tower_interface_print_temp": [
-		"0"
+        "270"
-	],
+    ],
-	"filament_overhang_2_4_speed": [
+    "include": [
-		"50",
+        "fdm_filament_template_direct_bowden_e3d"
-		"50",
+    ],
-		"50",
+    "nozzle_temperature": [
-		"50"
+        "270",
-	],
+        "270",
-	"filament_overhang_3_4_speed": [
+        "270",
-		"30",
+        "270",
-		"30",
+        "270",
-		"30",
+        "270"
-		"30"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_overhang_4_4_speed": [
+        "260",
-		"10",
+        "260",
-		"10",
+        "260",
-		"10",
+        "260",
-		"10"
+        "260",
-	],
+        "260"
-	"filament_overhang_totally_speed": [
+    ],
-		"10",
+    "retraction_distances_when_ec": [
-		"10",
+        "3",
-		"10",
+        "3",
-		"10"
+        "3",
-	],
+        "4",
-	"filament_bridge_speed": [
+        "4",
-		"25",
+        "4"
-		"25",
+    ],
-		"25",
+    "slow_down_min_speed": [
-		"25"
+        "20",
-	],
+        "20",
-	"filament_pre_cooling_temperature": [
+        "20",
-		"0",
+        "20",
-		"0",
+        "20",
-		"0",
+        "20"
-		"0"
+    ],
-	],
+    "compatible_printers": [
-	"filament_pre_cooling_temperature_nc": [
+        "Bambu Lab X2D 0.4 nozzle"
-		"0",
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0",
+        "; filament start gcode\n"
-		"0"
+    ]
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D.json

@@ -1,267 +1,104 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @BBL X2D",
+    "name": "Bambu ABS-GF @BBL X2D",
-	"inherits": "Bambu ABS-GF @base",
+    "inherits": "Bambu ABS-GF @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB50_07",
+    "setting_id": "GFSB50_07",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "60"
-		"0",
+    ],
-		"0",
+    "filament_cooling_before_tower": [
-		"0"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10",
-		"10",
+        "10",
-		"10",
+        "10",
-		"10",
+        "10"
-		"10"
+    ],
-	],
+    "filament_flow_ratio": [
-	"filament_deretraction_speed": [
+        "0.95",
-		"nil",
+        "0.95",
-		"nil",
+        "0.95",
-		"nil",
+        "0.95",
-		"nil"
+        "0.95",
-	],
+        "0.95"
-	"filament_enable_overhang_speed": [
+    ],
-		"1",
+    "filament_max_volumetric_speed": [
-		"1",
+        "12",
-		"1",
+        "12",
-		"1"
+        "12",
-	],
+        "12",
-	"filament_extruder_variant": [
+        "12",
-		"Direct Drive Standard",
+        "12"
-		"Direct Drive High Flow",
+    ],
-		"Bowden Standard",
+    "filament_ramming_travel_time": [
-		"Bowden High Flow"
+        "0",
-	],
+        "0",
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0",
-		"0",
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_flush_volumetric_speed": [
+        "10",
-		"0",
+        "10",
-		"0",
+        "10",
-		"0",
+        "10",
-		"0"
+        "10",
-	],
+        "10"
-	"filament_long_retractions_when_cut": [
+    ],
-		"nil",
+    "filament_retraction_length": [
-		"nil",
+        "1",
-		"nil",
+        "nil",
-		"nil"
+        "1",
-	],
+        "nil",
-	"filament_overhang_1_4_speed": [
+        "nil",
-		"0",
+        "nil"
-		"0",
+    ],
-		"0",
+    "filament_tower_interface_print_temp": [
-		"0"
+        "270"
-	],
+    ],
-	"filament_overhang_2_4_speed": [
+    "include": [
-		"50",
+        "fdm_filament_template_direct_bowden_e3d"
-		"50",
+    ],
-		"50",
+    "nozzle_temperature": [
-		"50"
+        "270",
-	],
+        "270",
-	"filament_overhang_3_4_speed": [
+        "270",
-		"30",
+        "270",
-		"30",
+        "270",
-		"30",
+        "270"
-		"30"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_overhang_4_4_speed": [
+        "260",
-		"10",
+        "260",
-		"10",
+        "260",
-		"10",
+        "260",
-		"10"
+        "260",
-	],
+        "260"
-	"filament_overhang_totally_speed": [
+    ],
-		"10",
+    "retraction_distances_when_ec": [
-		"10",
+        "3",
-		"10",
+        "3",
-		"10"
+        "3",
-	],
+        "4",
-	"filament_bridge_speed": [
+        "4",
-		"25",
+        "4"
-		"25",
+    ],
-		"25",
+    "slow_down_min_speed": [
-		"25"
+        "20",
-	],
+        "20",
-	"filament_pre_cooling_temperature": [
+        "20",
-		"0",
+        "20",
-		"0",
+        "20",
-		"0",
+        "20"
-		"0"
+    ],
-	],
+    "compatible_printers": [
-	"filament_pre_cooling_temperature_nc": [
+        "Bambu Lab X2D 0.6 nozzle",
-		"0",
+        "Bambu Lab X2D 0.8 nozzle"
-		"0",
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"1",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ABS-GF @base.json

@@ -1,45 +1,45 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ABS-GF @base",
+    "name": "Bambu ABS-GF @base",
-	"inherits": "fdm_filament_abs",
+    "inherits": "fdm_filament_abs",
-	"from": "system",
+    "from": "system",
-	"filament_id": "OFknl9Iz",
+    "filament_id": "OFknl9Iz",
-	"instantiation": "false",
+    "instantiation": "false",
-	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
-	"fan_cooling_layer_time": [
+    "fan_cooling_layer_time": [
-		"12"
+        "12"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_cost": [
+    "filament_cost": [
-		"29.99"
+        "26.99"
-	],
+    ],
-	"filament_density": [
+    "filament_density": [
-		"1.08"
+        "1.08"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_flow_ratio": [
-		"0.95"
+        "0.95"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"12"
+        "12"
-	],
+    ],
-	"filament_type": [
+    "filament_type": [
-		"ABS-GF"
+        "ABS-GF"
-	],
+    ],
-	"filament_vendor": [
+    "filament_vendor": [
-		"Bambu Lab"
+        "Bambu Lab"
-	],
+    ],
-	"impact_strength_z": [
+    "impact_strength_z": [
-		"5.3"
+        "5.3"
-	],
+    ],
-	"overhang_fan_speed": [
+    "overhang_fan_speed": [
-		"30"
+        "30"
-	],
+    ],
-	"overhang_fan_threshold": [
+    "overhang_fan_threshold": [
-		"10%"
+        "10%"
-	],
+    ],
-	"slow_down_layer_time": [
+    "slow_down_layer_time": [
-		"4"
+        "4"
-	]
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json

@@ -1,20 +1,20 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL A1 0.2 nozzle",
+    "name": "Bambu ASA @BBL A1 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_10",
+    "setting_id": "GFSB01_10",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2"
+        "2"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"compatible_printers": [
+    "compatible_printers": [
-		"Bambu Lab A1 0.2 nozzle"
+        "Bambu Lab A1 0.2 nozzle"
-	]
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json

@@ -1,20 +1,20 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL A1 0.4 nozzle",
+    "name": "Bambu ASA @BBL A1 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_09",
+    "setting_id": "GFSB01_09",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"compatible_printers": [
+    "compatible_printers": [
-		"Bambu Lab A1 0.4 nozzle"
+        "Bambu Lab A1 0.4 nozzle"
-	]
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json

@@ -1,21 +1,21 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL A1 0.6 nozzle",
+    "name": "Bambu ASA @BBL A1 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_08",
+    "setting_id": "GFSB01_08",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_min_speed": [
+    "fan_min_speed": [
-		"25"
+        "25"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18"
+        "18"
-	],
+    ],
-	"compatible_printers": [
+    "compatible_printers": [
-		"Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle"
+        "Bambu Lab A1 0.8 nozzle"
-	]
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.2 nozzle.json

@@ -1,201 +1,104 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2C 0.2 nozzle",
+    "name": "Bambu ASA @BBL H2C 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_24",
+    "setting_id": "GFSB01_24",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0094"
+        "0.0094"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.2258"
+        "0.2258"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_min": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"filament_change_length": [
+    "filament_change_length": [
-		"4"
+        "4"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_pre_cooling_temperature_nc": [
-		"230",
+        "230",
-		"230"
+        "230"
-	],
+    ],
-	"filament_prime_volume": [
+    "filament_prime_volume": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_prime_volume_nc": [
+    "filament_prime_volume_nc": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "filament_ramming_travel_time_nc": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"first_x_layer_fan_speed": [
+    "first_x_layer_fan_speed": [
-		"0"
+        "0"
-	],
+    ],
-	"filament_change_length_nc": [
+    "filament_change_length_nc": [
-		"4"
+        "4"
-	],
+    ],
-	"hole_coef_2": [
+    "hole_coef_2": [
-		"0.0013"
+        "0.0013"
-	],
+    ],
-	"hole_coef_3": [
+    "hole_coef_3": [
-		"0.1261"
+        "0.1261"
-	],
+    ],
-	"hole_limit_max": [
+    "hole_limit_max": [
-		"0.1586"
+        "0.1586"
-	],
+    ],
-	"hole_limit_min": [
+    "hole_limit_min": [
-		"0.1261"
+        "0.1261"
-	],
+    ],
-	"filament_preheat_temperature_delta": [
+    "filament_preheat_temperature_delta": [
-		"20",
+        "20",
-		"20"
+        "20"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_deretraction_speed": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_extruder_variant": [
+        "270",
-		"Direct Drive Standard",
+        "270"
-		"Direct Drive High Flow"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_flush_temp": [
+        "100"
-		"0",
+    ],
-		"0"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_flush_volumetric_speed": [
+        "20"
-		"0",
+    ],
-		"0"
+    "temperature_vitrification": [
-	],
+        "85"
-	"filament_flow_ratio": [
+    ],
-		"0.95",
+    "compatible_printers": [
-		"0.95"
+        "Bambu Lab H2C 0.2 nozzle"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_pre_cooling_temperature": [
+        "; filament end gcode \n"
-		"0",
+    ]
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.6 nozzle.json

@@ -1,198 +1,135 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2C 0.6 nozzle",
+    "name": "Bambu ASA @BBL H2C 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_37",
+    "setting_id": "GFSB01_37",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0094"
+        "0.0094"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_min": [
-		"0.2258"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_max": [
-		"-0.0092"
+        "0.2258"
-	],
+    ],
-	"filament_change_length": [
+    "filament_cooling_before_tower": [
-		"4"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10"
-		"10",
+    ],
-		"10"
+    "filament_flow_ratio": [
-	],
+        "0.96",
-	"filament_flow_ratio": [
+        "0.96",
-		"0.96",
+        "0.96"
-		"0.96"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_max_volumetric_speed": [
+        "25",
-		"25",
+        "30",
-		"30"
+        "25"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.4",
-	],
+        "0.4"
-	"filament_prime_volume": [
+    ],
-		"30"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_prime_volume_nc": [
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_wipe_distance": [
-		"0",
+        "1",
-		"0"
+        "1",
-	],
+        "1"
-	"filament_ramming_travel_time_nc": [
+    ],
-		"1",
+    "filament_prime_volume": [
-		"1"
+        "30"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_prime_volume_nc": [
-		"0.4",
+        "30"
-		"0.4"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_wipe": [
+        "Spiral Lift",
-		"1",
+        "Spiral Lift",
-		"1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_pre_cooling_temperature_nc": [
-		"1",
+        "230",
-		"1"
+        "230",
-	],
+        "230"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "filament_ramming_travel_time": [
-		"Spiral Lift"
+        "0",
-	],
+        "0",
-	"first_x_layer_fan_speed": [
+        "0"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time_nc": [
-	"filament_change_length_nc": [
+        "1",
-		"4"
+        "1",
-	],
+        "1"
-	"hole_coef_2": [
+    ],
-		"0.0013"
+    "filament_change_length": [
-	],
+        "4"
-	"hole_coef_3": [
+    ],
-		"0.1261"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"hole_limit_max": [
+    ],
-		"0.1586"
+    "first_x_layer_fan_speed": [
-	],
+        "0"
-	"hole_limit_min": [
+    ],
-		"0.1261"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_preheat_temperature_delta": [
+    ],
-		"20",
+    "hole_coef_3": [
-		"20"
+        "0.1261"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "hole_limit_min": [
-		"0",
+        "0.1261"
-		"0"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_deretraction_speed": [
+        "0.1586"
-		"nil",
+    ],
-		"nil"
+    "filament_preheat_temperature_delta": [
-	],
+        "20",
-	"filament_extruder_variant": [
+        "20",
-		"Direct Drive Standard",
+        "20"
-		"Direct Drive High Flow"
+    ],
-	],
+    "include": [
-	"filament_flush_temp": [
+        "fdm_filament_template_direct_dual_e3d"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_long_retractions_when_cut": [
+        "270",
-		"nil",
+        "270",
-		"nil"
+        "270"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "slow_down_min_speed": [
-		"0",
+        "20",
-		"0"
+        "20",
-	],
+        "20"
-	"filament_retract_length_nc": [
+    ],
-		"14",
+    "temperature_vitrification": [
-		"14"
+        "85"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "compatible_printers": [
-		"-1",
+        "Bambu Lab H2C 0.6 nozzle"
-		"-1"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_ramming_volumetric_speed_nc": [
+        "; filament start gcode\n"
-		"-1",
+    ],
-		"-1"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_retract_before_wipe": [
+    ]
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.8 nozzle.json

@@ -1,198 +1,121 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2C 0.8 nozzle",
+    "name": "Bambu ASA @BBL H2C 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_38",
+    "setting_id": "GFSB01_38",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0094"
+        "0.0094"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.2258"
+        "0.2258"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_min": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"filament_change_length": [
+    "filament_change_length": [
-		"4"
+        "4"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "filament_cooling_before_tower": [
-		"10",
+        "10",
-		"10"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_flow_ratio": [
-		"0.96",
+        "0.96",
-		"0.96"
+        "0.96"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"30"
+        "30"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_pre_cooling_temperature_nc": [
-		"230",
+        "230",
-		"230"
+        "230"
-	],
+    ],
-	"filament_prime_volume": [
+    "filament_prime_volume": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_prime_volume_nc": [
+    "filament_prime_volume_nc": [
-		"30"
+        "30"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "filament_ramming_travel_time_nc": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_retraction_length": [
-		"0.4",
+        "0.4",
-		"0.4"
+        "0.4"
-	],
+    ],
-	"filament_wipe": [
+    "filament_wipe": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_wipe_distance": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_z_hop_types": [
+    "filament_z_hop_types": [
-		"Spiral Lift",
+        "Spiral Lift",
-		"Spiral Lift"
+        "Spiral Lift"
-	],
+    ],
-	"first_x_layer_fan_speed": [
+    "first_x_layer_fan_speed": [
-		"0"
+        "0"
-	],
+    ],
-	"filament_change_length_nc": [
+    "filament_change_length_nc": [
-		"4"
+        "4"
-	],
+    ],
-	"hole_coef_2": [
+    "hole_coef_2": [
-		"0.0013"
+        "0.0013"
-	],
+    ],
-	"hole_coef_3": [
+    "hole_coef_3": [
-		"0.1261"
+        "0.1261"
-	],
+    ],
-	"hole_limit_max": [
+    "hole_limit_max": [
-		"0.1586"
+        "0.1586"
-	],
+    ],
-	"hole_limit_min": [
+    "hole_limit_min": [
-		"0.1261"
+        "0.1261"
-	],
+    ],
-	"filament_preheat_temperature_delta": [
+    "filament_preheat_temperature_delta": [
-		"20",
+        "20",
-		"20"
+        "20"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_deretraction_speed": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_extruder_variant": [
+        "270",
-		"Direct Drive Standard",
+        "270"
-		"Direct Drive High Flow"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_flush_temp": [
+        "20",
-		"0",
+        "20"
-		"0"
+    ],
-	],
+    "temperature_vitrification": [
-	"filament_flush_volumetric_speed": [
+        "85"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2C 0.8 nozzle"
-	"filament_long_retractions_when_cut": [
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "filament_end_gcode": [
-		"0",
+        "; filament end gcode \n"
-		"0"
+    ]
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2C.json

@@ -1,198 +1,135 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2C",
+    "name": "Bambu ASA @BBL H2C",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_23",
+    "setting_id": "GFSB01_23",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.0094"
+        "0.0094"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"-0.0092"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_min": [
-		"0.2258"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_min": [
+    "counter_limit_max": [
-		"-0.0092"
+        "0.2258"
-	],
+    ],
-	"filament_change_length": [
+    "filament_cooling_before_tower": [
-		"4"
+        "10",
-	],
+        "10",
-	"filament_cooling_before_tower": [
+        "10"
-		"10",
+    ],
-		"10"
+    "filament_flow_ratio": [
-	],
+        "0.96",
-	"filament_flow_ratio": [
+        "0.96",
-		"0.96",
+        "0.96"
-		"0.96"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_max_volumetric_speed": [
+        "20",
-		"20",
+        "30",
-		"30"
+        "20"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.6",
-	],
+        "0.4"
-	"filament_prime_volume": [
+    ],
-		"30"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_prime_volume_nc": [
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_wipe_distance": [
-		"0",
+        "1",
-		"0"
+        "1",
-	],
+        "1"
-	"filament_ramming_travel_time_nc": [
+    ],
-		"1",
+    "filament_prime_volume": [
-		"1"
+        "30"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_prime_volume_nc": [
-		"0.4",
+        "30"
-		"0.6"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_wipe": [
+        "Spiral Lift",
-		"1",
+        "Spiral Lift",
-		"1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_pre_cooling_temperature_nc": [
-		"1",
+        "230",
-		"1"
+        "230",
-	],
+        "230"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "filament_ramming_travel_time": [
-		"Spiral Lift"
+        "0",
-	],
+        "0",
-	"first_x_layer_fan_speed": [
+        "0"
-		"0"
+    ],
-	],
+    "filament_ramming_travel_time_nc": [
-	"filament_change_length_nc": [
+        "1",
-		"4"
+        "1",
-	],
+        "1"
-	"hole_coef_2": [
+    ],
-		"0.0013"
+    "filament_change_length": [
-	],
+        "4"
-	"hole_coef_3": [
+    ],
-		"0.1261"
+    "filament_change_length_nc": [
-	],
+        "4"
-	"hole_limit_max": [
+    ],
-		"0.1586"
+    "first_x_layer_fan_speed": [
-	],
+        "0"
-	"hole_limit_min": [
+    ],
-		"0.1261"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_preheat_temperature_delta": [
+    ],
-		"20",
+    "hole_coef_3": [
-		"20"
+        "0.1261"
-	],
+    ],
-	"filament_adaptive_volumetric_speed": [
+    "hole_limit_min": [
-		"0",
+        "0.1261"
-		"0"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_deretraction_speed": [
+        "0.1586"
-		"nil",
+    ],
-		"nil"
+    "filament_preheat_temperature_delta": [
-	],
+        "20",
-	"filament_extruder_variant": [
+        "20",
-		"Direct Drive Standard",
+        "20"
-		"Direct Drive High Flow"
+    ],
-	],
+    "include": [
-	"filament_flush_temp": [
+        "fdm_filament_template_direct_dual_e3d"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_long_retractions_when_cut": [
+        "270",
-		"nil",
+        "270",
-		"nil"
+        "270"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "slow_down_min_speed": [
-		"0",
+        "20",
-		"0"
+        "20",
-	],
+        "20"
-	"filament_retract_length_nc": [
+    ],
-		"14",
+    "temperature_vitrification": [
-		"14"
+        "85"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "compatible_printers": [
-		"-1",
+        "Bambu Lab H2C 0.4 nozzle"
-		"-1"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_ramming_volumetric_speed_nc": [
+        "; filament start gcode\n"
-		"-1",
+    ],
-		"-1"
+    "filament_end_gcode": [
-	],
+        "; filament end gcode \n"
-	"filament_retract_before_wipe": [
+    ]
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json

@@ -1,128 +1,77 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.2 nozzle",
+    "name": "Bambu ASA @BBL H2D 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_12",
+    "setting_id": "GFSB01_12",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.2258"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_min": [
-		"0"
+        "-0.0092"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "2",
-		"nil"
+        "2"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"2",
+        "0",
-		"2"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retract_before_wipe": [
+        "4"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "hole_limit_max": [
-		"nil",
+        "0.1586"
-		"nil"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_retraction_distances_when_cut": [
+        "0.1261"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_length": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "slow_down_min_speed": [
-		"nil"
+        "20",
-	],
+        "20"
-	"filament_wipe": [
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil"
+        "Bambu Lab H2D 0.2 nozzle"
-	],
+    ],
-	"filament_wipe_distance": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_z_hop": [
+        "; filament end gcode \n"
-		"nil",
+    ]
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json

@@ -1,149 +1,103 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.4 nozzle",
+    "name": "Bambu ASA @BBL H2D 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_13",
+    "setting_id": "GFSB01_13",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.007"
+        "0.0094"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.003"
+        "-0.0092"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.1"
+        "0.2258"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_flow_ratio": [
+        "4"
-		"0.95",
+    ],
-		"0.95"
+    "filament_cooling_before_tower": [
-	],
+        "10",
-	"filament_flush_temp": [
+        "10",
-		"0",
+        "10"
-		"0"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_flush_volumetric_speed": [
+        "20",
-		"0",
+        "35",
-		"0"
+        "20"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_prime_volume": [
-		"nil",
+        "30"
-		"nil"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_max_volumetric_speed": [
+        "0",
-		"20",
+        "0",
-		"35"
+        "0"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_retraction_length": [
-		"-1",
+        "0.4",
-		"-1"
+        "0.4",
-	],
+        "0.4"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "filament_wipe": [
-		"nil"
+        "1",
-	],
+        "1",
-	"filament_retract_restart_extra": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retract_when_changing_layer": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retraction_distances_when_cut": [
+        "Spiral Lift",
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retraction_length": [
+    "hole_coef_2": [
-		"0.4",
+        "0.0013"
-		"0.4"
+    ],
-	],
+    "hole_coef_3": [
-	"filament_retraction_minimum_travel": [
+        "0.1261"
-		"nil",
+    ],
-		"nil"
+    "hole_limit_max": [
-	],
+        "0.1586"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_limit_min": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_wipe": [
+    "include": [
-		"1",
+        "fdm_filament_template_direct_dual_e3d"
-		"1"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_wipe_distance": [
+        "270",
-		"1",
+        "270",
-		"1"
+        "270"
-	],
+    ],
-	"filament_z_hop": [
+    "nozzle_temperature_initial_layer": [
-		"nil",
+        "270",
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "slow_down_min_speed": [
-		"Spiral Lift"
+        "20",
-	],
+        "20",
-	"filament_extruder_variant": [
+        "20"
-		"Direct Drive Standard",
+    ],
-		"Direct Drive High Flow"
+    "compatible_printers": [
-	],
+        "Bambu Lab H2D 0.4 nozzle"
-	"filament_pre_cooling_temperature": [
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0"
+        "; filament start gcode\n"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_end_gcode": [
-		"0",
+        "; filament end gcode \n"
-		"0"
+    ]
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.006"
-	],
-	"hole_coef_3": [
-		"0.25"
-	],
-	"hole_limit_min": [
-		"-0.088"
-	],
-	"hole_limit_max": [
-		"0.14"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json

@@ -1,128 +1,103 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.6 nozzle",
+    "name": "Bambu ASA @BBL H2D 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_11",
+    "setting_id": "GFSB01_11",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.2258"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_min": [
-		"0"
+        "-0.0092"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"35"
+        "35",
-	],
+        "25"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_retraction_length": [
-		"nil"
+        "0.4",
-	],
+        "0.4",
-	"filament_retract_when_changing_layer": [
+        "0.4"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_wipe_distance": [
-	"filament_retraction_length": [
+        "1",
-		"0.4",
+        "1",
-		"0.4"
+        "1"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift",
-	],
+        "Spiral Lift"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "0.0013"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1261"
-		"1"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_wipe_distance": [
+        "0.1586"
-		"1",
+    ],
-		"1"
+    "hole_limit_min": [
-	],
+        "0.1261"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "nozzle_temperature": [
-		"Spiral Lift",
+        "270",
-		"Spiral Lift"
+        "270",
-	],
+        "270"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature_initial_layer": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_pre_cooling_temperature": [
+        "270"
-		"0",
+    ],
-		"0"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"filament_ramming_travel_time": [
+        "20",
-		"0",
+        "20"
-		"0"
+    ],
-	],
+    "compatible_printers": [
-	"filament_adaptive_volumetric_speed": [
+        "Bambu Lab H2D 0.6 nozzle"
-		"0",
+    ],
-		"0"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"long_retractions_when_ec": [
+    ],
-		"1",
+    "filament_end_gcode": [
-		"1"
+        "; filament end gcode \n"
-	],
+    ]
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.8 nozzle.json

@@ -1,132 +1,97 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.8 nozzle",
+    "name": "Bambu ASA @BBL H2D 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_33",
+    "setting_id": "GFSB01_33",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_max": [
-	],
+        "0.2258"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_min": [
-		"0"
+        "-0.0092"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "25",
-		"nil"
+        "35"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"25",
+        "0.4",
-		"35"
+        "0.4"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_wipe": [
-		"-1",
+        "1",
-		"-1"
+        "1"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_wipe_distance": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_extruder_id": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retraction_length": [
+    "filament_prime_volume": [
-		"0.4",
+        "30"
-		"0.4"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retraction_minimum_travel": [
+        "4"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_wipe": [
+    "hole_limit_max": [
-		"1",
+        "0.1586"
-		"1"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe_distance": [
+        "0.1261"
-		"1",
+    ],
-		"1"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "nozzle_temperature_initial_layer": [
-		"Spiral Lift"
+        "270",
-	],
+        "270"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "slow_down_min_speed": [
-		"Direct Drive High Flow"
+        "20",
-	],
+        "20"
-	"filament_pre_cooling_temperature": [
+    ],
-		"0",
+    "compatible_printers": [
-		"0"
+        "Bambu Lab H2D 0.8 nozzle"
-	],
+    ],
-	"filament_ramming_travel_time": [
+    "filament_start_gcode": [
-		"0",
+        "; filament start gcode\n"
-		"0"
+    ],
-	],
+    "filament_end_gcode": [
-	"filament_adaptive_volumetric_speed": [
+        "; filament end gcode \n"
-		"0",
+    ]
-		"0"
-	],
-	"filament_extruder_id": [
-		"1",
-		"1"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.2 nozzle.json

@@ -1,128 +1,47 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.2 nozzle",
+    "name": "Bambu ASA @BBL H2DP 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_18",
+    "setting_id": "GFSB01_18",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "2",
-		"0.95"
+        "2"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_long_retractions_when_cut": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_max_volumetric_speed": [
+        "270",
-		"2",
+        "270"
-		"2"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_ramming_volumetric_speed": [
+        "20",
-		"-1",
+        "20"
-		"-1"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_before_wipe": [
+        "Bambu Lab H2D Pro 0.2 nozzle"
-		"nil",
+    ],
-		"nil"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.4 nozzle.json

@@ -1,149 +1,84 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.4 nozzle",
+    "name": "Bambu ASA @BBL H2DP 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_19",
+    "setting_id": "GFSB01_19",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"counter_coef_2": [
+    "counter_coef_2": [
-		"0.007"
+        "0.007"
-	],
+    ],
-	"counter_coef_3": [
+    "counter_coef_3": [
-		"0.003"
+        "0.003"
-	],
+    ],
-	"counter_limit_max": [
+    "counter_limit_max": [
-		"0.1"
+        "0.1"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "20",
-		"0.95"
+        "30"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"20",
+        "1",
-		"30"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "hole_coef_2": [
-		"nil",
+        "-0.006"
-		"nil"
+    ],
-	],
+    "hole_coef_3": [
-	"filament_retract_restart_extra": [
+        "0.25"
-		"nil",
+    ],
-		"nil"
+    "hole_limit_max": [
-	],
+        "0.14"
-	"filament_retract_when_changing_layer": [
+    ],
-		"nil",
+    "hole_limit_min": [
-		"nil"
+        "-0.088"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retraction_length": [
+        "270",
-		"0.4",
+        "270"
-		"0.4"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retraction_minimum_travel": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_speed": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_wipe": [
+        "Bambu Lab H2D Pro 0.4 nozzle"
-		"1",
+    ],
-		"1"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_wipe_distance": [
+    ],
-		"1",
+    "filament_end_gcode": [
-		"1"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.006"
-	],
-	"hole_coef_3": [
-		"0.25"
-	],
-	"hole_limit_min": [
-		"-0.088"
-	],
-	"hole_limit_max": [
-		"0.14"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.6 nozzle.json

@@ -1,128 +1,63 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.6 nozzle",
+    "name": "Bambu ASA @BBL H2DP 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_17",
+    "setting_id": "GFSB01_17",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "25",
-		"0.95"
+        "35"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"35"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_distances_when_cut": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_length": [
+        "Bambu Lab H2D Pro 0.6 nozzle"
-		"0.4",
+    ],
-		"0.4"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.8 nozzle.json

@@ -1,128 +1,63 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.8 nozzle",
+    "name": "Bambu ASA @BBL H2DP 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_34",
+    "setting_id": "GFSB01_34",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "25",
-		"0.95"
+        "35"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "0.4"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_wipe": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"35"
+        "1"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_z_hop_types": [
-		"-1",
+        "Spiral Lift",
-		"-1"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_distances_when_cut": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_length": [
+        "Bambu Lab H2D Pro 0.8 nozzle"
-		"0.4",
+    ],
-		"0.4"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "filament_end_gcode": [
-		"nil"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.2 nozzle.json

@@ -1,134 +1,95 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2S 0.2 nozzle",
+    "name": "Bambu ASA @BBL H2S 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_27",
+    "setting_id": "GFSB01_27",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "-0.0092"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_max": [
-		"0"
+        "0.2258"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"3",
+        "10",
-		"3"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_flush_volumetric_speed": [
-		"nil",
+        "3",
-		"nil"
+        "3"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retract_restart_extra": [
+        "4"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retract_when_changing_layer": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "hole_limit_min": [
-		"nil",
+        "0.1261"
-		"nil"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_retraction_length": [
+        "0.1586"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "long_retractions_when_ec": [
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_wipe_distance": [
+    ],
-		"nil",
+    "overhang_fan_speed": [
-		"nil"
+        "100"
-	],
+    ],
-	"filament_z_hop": [
+    "pre_start_fan_time": [
-		"nil",
+        "2"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_z_hop_types": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_extruder_variant": [
+        "20",
-		"Direct Drive Standard",
+        "20"
-		"Direct Drive High Flow"
+    ],
-	],
+    "compatible_printers": [
-	"filament_pre_cooling_temperature": [
+        "Bambu Lab H2S 0.2 nozzle"
-		"0",
+    ],
-		"0"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"filament_ramming_travel_time": [
+    ],
-		"0",
+    "filament_end_gcode": [
-		"0"
+        "; filament end gcode \n"
-	],
+    ]
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.6 nozzle.json

@@ -1,134 +1,119 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2S 0.6 nozzle",
+    "name": "Bambu ASA @BBL H2S 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_36",
+    "setting_id": "GFSB01_36",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "-0.0092"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_max": [
-		"0"
+        "0.2258"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"25",
+        "25",
-		"35"
+        "35",
-	],
+        "25"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4",
-	],
+        "0.4"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_wipe": [
-		"nil"
+        "1",
-	],
+        "1",
-	"filament_retract_when_changing_layer": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retraction_length": [
+        "Spiral Lift",
-		"0.4",
+        "Spiral Lift",
-		"0.4"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "0.0013"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1261"
-		"1"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe_distance": [
+        "0.1261"
-		"1",
+    ],
-		"1"
+    "hole_limit_max": [
-	],
+        "0.1586"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "long_retractions_when_ec": [
-		"Spiral Lift",
+        "0",
-		"Spiral Lift"
+        "0",
-	],
+        "0"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_pre_cooling_temperature": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "270",
-	"filament_ramming_travel_time": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_adaptive_volumetric_speed": [
+        "100"
-		"0",
+    ],
-		"0"
+    "pre_start_fan_time": [
-	],
+        "2"
-	"long_retractions_when_ec": [
+    ],
-		"0",
+    "retraction_distances_when_ec": [
-		"0"
+        "0",
-	],
+        "0",
-	"nozzle_temperature": [
+        "0"
-		"270",
+    ],
-		"270"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"nozzle_temperature_initial_layer": [
+        "20",
-		"270",
+        "20"
-		"270"
+    ],
-	],
+    "compatible_printers": [
-	"overhang_fan_speed": [
+        "Bambu Lab H2S 0.6 nozzle"
-		"100"
+    ],
-	],
+    "filament_start_gcode": [
-	"pre_start_fan_time": [
+        "; filament start gcode\n"
-		"2"
+    ],
-	],
+    "filament_end_gcode": [
-	"retraction_distances_when_ec": [
+        "; filament end gcode \n"
-		"0",
+    ]
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.8 nozzle.json

@@ -1,134 +1,107 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2S 0.8 nozzle",
+    "name": "Bambu ASA @BBL H2S 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_35",
+    "setting_id": "GFSB01_35",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "-0.0092"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_max": [
-		"0"
+        "0.2258"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_max_volumetric_speed": [
-		"nil",
+        "25",
-		"nil"
+        "35"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"25",
+        "0.4",
-		"35"
+        "0.4"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "filament_wipe": [
-		"-1",
+        "1",
-		"-1"
+        "1"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_wipe_distance": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_prime_volume": [
-		"nil",
+        "30"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retract_when_changing_layer": [
+        "Spiral Lift",
-		"nil",
+        "Spiral Lift"
-		"nil"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_retraction_distances_when_cut": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "filament_change_length": [
-	"filament_retraction_length": [
+        "4"
-		"0.4",
+    ],
-		"0.4"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_retraction_speed": [
+    "hole_limit_min": [
-		"nil",
+        "0.1261"
-		"nil"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_wipe": [
+        "0.1586"
-		"1",
+    ],
-		"1"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_wipe_distance": [
+    ],
-		"1",
+    "long_retractions_when_ec": [
-		"1"
+        "0",
-	],
+        "0"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_z_hop_types": [
+    ],
-		"Spiral Lift",
+    "nozzle_temperature_initial_layer": [
-		"Spiral Lift"
+        "270",
-	],
+        "270"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "overhang_fan_speed": [
-		"Direct Drive High Flow"
+        "100"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "pre_start_fan_time": [
-		"0",
+        "2"
-		"0"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_ramming_travel_time": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_adaptive_volumetric_speed": [
+        "20",
-		"0",
+        "20"
-		"0"
+    ],
-	],
+    "compatible_printers": [
-	"long_retractions_when_ec": [
+        "Bambu Lab H2S 0.8 nozzle"
-		"0",
+    ],
-		"0"
+    "filament_start_gcode": [
-	],
+        "; filament start gcode\n"
-	"nozzle_temperature": [
+    ],
-		"270",
+    "filament_end_gcode": [
-		"270"
+        "; filament end gcode \n"
-	],
+    ]
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2S.json

@@ -1,134 +1,119 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL H2S",
+    "name": "Bambu ASA @BBL H2S",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_26",
+    "setting_id": "GFSB01_26",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
+    ],
-	],
+    "counter_coef_3": [
-	"filament_flow_ratio": [
+        "-0.0092"
-		"0.95",
+    ],
-		"0.95"
+    "counter_limit_min": [
-	],
+        "-0.0092"
-	"filament_flush_temp": [
+    ],
-		"0",
+    "counter_limit_max": [
-		"0"
+        "0.2258"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
-	],
+    "filament_cooling_before_tower": [
-	"filament_long_retractions_when_cut": [
+        "10",
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"20",
+        "20",
-		"35"
+        "35",
-	],
+        "20"
-	"filament_ramming_volumetric_speed": [
+    ],
-		"-1",
+    "filament_prime_volume": [
-		"-1"
+        "30"
-	],
+    ],
-	"filament_retract_before_wipe": [
+    "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4",
-	],
+        "0.4"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "filament_wipe": [
-		"nil"
+        "1",
-	],
+        "1",
-	"filament_retract_when_changing_layer": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retraction_distances_when_cut": [
+        "1",
-		"nil",
+        "1"
-		"nil"
+    ],
-	],
+    "filament_z_hop_types": [
-	"filament_retraction_length": [
+        "Spiral Lift",
-		"0.4",
+        "Spiral Lift",
-		"0.4"
+        "Spiral Lift"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "hole_coef_2": [
-		"nil"
+        "0.0013"
-	],
+    ],
-	"filament_wipe": [
+    "hole_coef_3": [
-		"1",
+        "0.1261"
-		"1"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_wipe_distance": [
+        "0.1261"
-		"1",
+    ],
-		"1"
+    "hole_limit_max": [
-	],
+        "0.1586"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "include": [
-		"nil"
+        "fdm_filament_template_direct_dual_e3d"
-	],
+    ],
-	"filament_z_hop_types": [
+    "long_retractions_when_ec": [
-		"Spiral Lift",
+        "0",
-		"Spiral Lift"
+        "0",
-	],
+        "0"
-	"filament_extruder_variant": [
+    ],
-		"Direct Drive Standard",
+    "nozzle_temperature": [
-		"Direct Drive High Flow"
+        "270",
-	],
+        "270",
-	"filament_pre_cooling_temperature": [
+        "270"
-		"0",
+    ],
-		"0"
+    "nozzle_temperature_initial_layer": [
-	],
+        "270",
-	"filament_ramming_travel_time": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "overhang_fan_speed": [
-	"filament_adaptive_volumetric_speed": [
+        "100"
-		"0",
+    ],
-		"0"
+    "pre_start_fan_time": [
-	],
+        "2"
-	"long_retractions_when_ec": [
+    ],
-		"0",
+    "retraction_distances_when_ec": [
-		"0"
+        "0",
-	],
+        "0",
-	"nozzle_temperature": [
+        "0"
-		"270",
+    ],
-		"270"
+    "slow_down_min_speed": [
-	],
+        "20",
-	"nozzle_temperature_initial_layer": [
+        "20",
-		"270",
+        "20"
-		"270"
+    ],
-	],
+    "compatible_printers": [
-	"overhang_fan_speed": [
+        "Bambu Lab H2S 0.4 nozzle"
-		"100"
+    ],
-	],
+    "filament_start_gcode": [
-	"pre_start_fan_time": [
+        "; filament start gcode\n"
-		"2"
+    ],
-	],
+    "filament_end_gcode": [
-	"retraction_distances_when_ec": [
+        "; filament end gcode \n"
-		"0",
+    ]
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.2 nozzle.json

@@ -1,192 +1,101 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.2 nozzle",
+    "name": "Bambu ASA @BBL P2S 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_15",
+    "setting_id": "GFSB01_15",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
-	],
+    ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
-	],
+    ],
-	"fan_max_speed": [
+    "counter_limit_max": [
-		"60"
+        "0.2258"
-	],
+    ],
-	"fan_min_speed": [
+    "counter_limit_min": [
-		"30"
+        "-0.0092"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "fan_max_speed": [
-		"nil",
+        "60"
-		"nil"
+    ],
-	],
+    "fan_min_speed": [
-	"filament_flow_ratio": [
+        "30"
-		"0.95",
+    ],
-		"0.95"
+    "filament_cooling_before_tower": [
-	],
+        "10",
-	"filament_flush_temp": [
+        "10"
-		"0",
+    ],
-		"0"
+    "filament_flush_volumetric_speed": [
-	],
+        "3",
-	"filament_flush_volumetric_speed": [
+        "3"
-		"3",
+    ],
-		"3"
+    "filament_max_volumetric_speed": [
-	],
+        "2",
-	"filament_long_retractions_when_cut": [
+        "2"
-		"nil",
+    ],
-		"nil"
+    "filament_ramming_travel_time": [
-	],
+        "0",
-	"filament_max_volumetric_speed": [
+        "0"
-		"2",
+    ],
-		"2"
+    "filament_retraction_distances_when_cut": [
-	],
+        "10",
-	"filament_ramming_volumetric_speed": [
+        "10"
-		"-1",
+    ],
-		"-1"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_ramming_volumetric_speed_nc": [
+        "1"
-		"-1",
+    ],
-		"-1"
+    "filament_wipe_distance": [
-	],
+        "1",
-	"filament_retract_before_wipe": [
+        "1"
-		"nil",
+    ],
-		"nil"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "hole_limit_max": [
-		"nil",
+        "0.1586"
-		"nil"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_retraction_distances_when_cut": [
+        "0.1261"
-		"10",
+    ],
-		"10"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_length": [
+    ],
-		"nil",
+    "long_retractions_when_ec": [
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "nozzle_temperature": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_wipe": [
+    ],
-		"1",
+    "retraction_distances_when_ec": [
-		"1"
+        "0",
-	],
+        "0"
-	"filament_wipe_distance": [
+    ],
-		"1",
+    "slow_down_min_speed": [
-		"1"
+        "20",
-	],
+        "20"
-	"filament_z_hop": [
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil"
+        "Bambu Lab P2S 0.2 nozzle"
-	],
+    ],
-	"filament_z_hop_types": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ]
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.4 nozzle.json

@@ -1,186 +1,102 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.4 nozzle",
+    "name": "Bambu ASA @BBL P2S 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_16",
+    "setting_id": "GFSB01_16",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
-	],
+    ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil"
+    ],
-	],
+    "counter_limit_max": [
-	"filament_flow_ratio": [
+        "0.2258"
-		"0.95",
+    ],
-		"0.95"
+    "filament_cooling_before_tower": [
-	],
+        "10",
-	"filament_flush_temp": [
+        "10",
-		"0",
+        "10"
-		"0"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_flush_volumetric_speed": [
+        "18",
-		"0",
+        "25",
-		"0"
+        "18"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_max_volumetric_speed": [
+    ],
-		"18",
+    "filament_retraction_length": [
-		"25"
+        "0.4",
-	],
+        "0.4",
-	"filament_ramming_volumetric_speed": [
+        "0.4"
-		"-1",
+    ],
-		"-1"
+    "filament_z_hop_types": [
-	],
+        "Spiral Lift",
-	"filament_ramming_volumetric_speed_nc": [
+        "Spiral Lift",
-		"-1",
+        "Spiral Lift"
-		"-1"
+    ],
-	],
+    "filament_ramming_travel_time": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "hole_coef_2": [
-		"nil",
+        "0.0013"
-		"nil"
+    ],
-	],
+    "hole_coef_3": [
-	"filament_retract_when_changing_layer": [
+        "0.1261"
-		"nil",
+    ],
-		"nil"
+    "hole_limit_min": [
-	],
+        "0.1261"
-	"filament_retraction_distances_when_cut": [
+    ],
-		"10",
+    "hole_limit_max": [
-		"10"
+        "0.1586"
-	],
+    ],
-	"filament_retraction_length": [
+    "include": [
-		"0.4",
+        "fdm_filament_template_direct_dual_e3d"
-		"0.4"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_retraction_minimum_travel": [
+        "0",
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_retraction_speed": [
+    "nozzle_temperature": [
-		"nil",
+        "270",
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_wipe": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "270",
-	],
+        "270",
-	"filament_wipe_distance": [
+        "270"
-		"nil",
+    ],
-		"nil"
+    "retraction_distances_when_ec": [
-	],
+        "0",
-	"filament_z_hop": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_z_hop_types": [
+        "20",
-		"Spiral Lift",
+        "20",
-		"Spiral Lift"
+        "20"
-	],
+    ],
-	"filament_extruder_variant": [
+    "compatible_printers": [
-		"Direct Drive Standard",
+        "Bambu Lab P2S 0.4 nozzle"
-		"Direct Drive High Flow"
+    ],
-	],
+    "filament_start_gcode": [
-	"filament_pre_cooling_temperature": [
+        "; filament start gcode\n"
-		"0",
+    ]
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.6 nozzle.json

@@ -1,189 +1,115 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.6 nozzle",
+    "name": "Bambu ASA @BBL P2S 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_14",
+    "setting_id": "GFSB01_14",
-	"instantiation": "true",
+    "instantiation": "true",
-	"activate_air_filtration": [
+    "activate_air_filtration": [
-		"0"
+        "0"
-	],
+    ],
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
-	],
+    ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
-	],
+    ],
-	"fan_min_speed": [
+    "counter_limit_min": [
-		"25"
+        "-0.0092"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_max": [
-		"nil",
+        "0.2258"
-		"nil"
+    ],
-	],
+    "fan_min_speed": [
-	"filament_flow_ratio": [
+        "25"
-		"0.95",
+    ],
-		"0.95"
+    "filament_cooling_before_tower": [
-	],
+        "10",
-	"filament_flush_temp": [
+        "10",
-		"0",
+        "10"
-		"0"
+    ],
-	],
+    "filament_max_volumetric_speed": [
-	"filament_flush_volumetric_speed": [
+        "18",
-		"0",
+        "35",
-		"0"
+        "18"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_max_volumetric_speed": [
+    ],
-		"18",
+    "filament_retraction_length": [
-		"35"
+        "0.4",
-	],
+        "0.4",
-	"filament_ramming_volumetric_speed": [
+        "0.4"
-		"-1",
+    ],
-		"-1"
+    "filament_wipe": [
-	],
+        "1",
-	"filament_ramming_volumetric_speed_nc": [
+        "1",
-		"-1",
+        "1"
-		"-1"
+    ],
-	],
+    "filament_wipe_distance": [
-	"filament_retract_before_wipe": [
+        "1",
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "filament_z_hop_types": [
-		"nil",
+        "Spiral Lift",
-		"nil"
+        "Spiral Lift",
-	],
+        "Spiral Lift"
-	"filament_retract_when_changing_layer": [
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_retraction_distances_when_cut": [
+        "0"
-		"10",
+    ],
-		"10"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retraction_length": [
+    ],
-		"0.4",
+    "hole_coef_3": [
-		"0.4"
+        "0.1261"
-	],
+    ],
-	"filament_retraction_minimum_travel": [
+    "hole_limit_min": [
-		"nil",
+        "0.1261"
-		"nil"
+    ],
-	],
+    "hole_limit_max": [
-	"filament_retraction_speed": [
+        "0.1586"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual_e3d"
-	"filament_wipe": [
+    ],
-		"1",
+    "long_retractions_when_ec": [
-		"1"
+        "0",
-	],
+        "0",
-	"filament_wipe_distance": [
+        "0"
-		"1",
+    ],
-		"1"
+    "nozzle_temperature": [
-	],
+        "270",
-	"filament_z_hop": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_z_hop_types": [
+        "270",
-		"Spiral Lift",
+        "270",
-		"Spiral Lift"
+        "270"
-	],
+    ],
-	"filament_extruder_variant": [
+    "retraction_distances_when_ec": [
-		"Direct Drive Standard",
+        "0",
-		"Direct Drive High Flow"
+        "0",
-	],
+        "0"
-	"filament_pre_cooling_temperature": [
+    ],
-		"0",
+    "slow_down_min_speed": [
-		"0"
+        "20",
-	],
+        "20",
-	"filament_pre_cooling_temperature_nc": [
+        "20"
-		"0",
+    ],
-		"0"
+    "compatible_printers": [
-	],
+        "Bambu Lab P2S 0.6 nozzle"
-	"filament_ramming_travel_time": [
+    ],
-		"0",
+    "filament_start_gcode": [
-		"0"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.8 nozzle.json

@@ -1,186 +1,91 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.8 nozzle",
+    "name": "Bambu ASA @BBL P2S 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_32",
+    "setting_id": "GFSB01_32",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"65"
+        "65"
-	],
+    ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
-	],
+    ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
-	],
+    ],
-	"fan_min_speed": [
+    "counter_limit_max": [
-		"25"
+        "0.2258"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil"
+    ],
-	],
+    "fan_min_speed": [
-	"filament_flow_ratio": [
+        "25"
-		"0.95",
+    ],
-		"0.95"
+    "filament_cooling_before_tower": [
-	],
+        "10",
-	"filament_flush_temp": [
+        "10"
-		"0",
+    ],
-		"0"
+    "filament_max_volumetric_speed": [
-	],
+        "18",
-	"filament_flush_volumetric_speed": [
+        "35"
-		"0",
+    ],
-		"0"
+    "filament_ramming_travel_time": [
-	],
+        "0",
-	"filament_long_retractions_when_cut": [
+        "0"
-		"nil",
+    ],
-		"nil"
+    "filament_retraction_distances_when_cut": [
-	],
+        "10",
-	"filament_max_volumetric_speed": [
+        "10"
-		"18",
+    ],
-		"35"
+    "filament_retraction_length": [
-	],
+        "0.4",
-	"filament_ramming_volumetric_speed": [
+        "0.4"
-		"-1",
+    ],
-		"-1"
+    "filament_z_hop_types": [
-	],
+        "Spiral Lift",
-	"filament_ramming_volumetric_speed_nc": [
+        "Spiral Lift"
-		"-1",
+    ],
-		"-1"
+    "hole_coef_2": [
-	],
+        "0.0013"
-	"filament_retract_before_wipe": [
+    ],
-		"nil",
+    "hole_coef_3": [
-		"nil"
+        "0.1261"
-	],
+    ],
-	"filament_retract_restart_extra": [
+    "hole_limit_max": [
-		"nil",
+        "0.1586"
-		"nil"
+    ],
-	],
+    "hole_limit_min": [
-	"filament_retract_when_changing_layer": [
+        "0.1261"
-		"nil",
+    ],
-		"nil"
+    "include": [
-	],
+        "fdm_filament_template_direct_dual"
-	"filament_retraction_distances_when_cut": [
+    ],
-		"10",
+    "long_retractions_when_ec": [
-		"10"
+        "0",
-	],
+        "0"
-	"filament_retraction_length": [
+    ],
-		"0.4",
+    "nozzle_temperature": [
-		"0.4"
+        "270",
-	],
+        "270"
-	"filament_retraction_minimum_travel": [
+    ],
-		"nil",
+    "nozzle_temperature_initial_layer": [
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retraction_speed": [
+    ],
-		"nil",
+    "retraction_distances_when_ec": [
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_wipe": [
+    ],
-		"nil",
+    "slow_down_min_speed": [
-		"nil"
+        "20",
-	],
+        "20"
-	"filament_wipe_distance": [
+    ],
-		"nil",
+    "compatible_printers": [
-		"nil"
+        "Bambu Lab P2S 0.8 nozzle"
-	],
+    ],
-	"filament_z_hop": [
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ]
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json

@@ -1,119 +1,50 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1 0.2 nozzle",
+    "name": "Bambu ASA @BBL X1 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_03",
+    "setting_id": "GFSB01_03",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_ramming_travel_time": [
-		"0.95",
+        "0",
-		"0.95"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_restart_extra": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_when_changing_layer": [
+        "Bambu Lab X1 0.2 nozzle"
-		"nil",
+    ]
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 0.2 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json

@@ -1,125 +1,60 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1 0.6 nozzle",
+    "name": "Bambu ASA @BBL X1 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_04",
+    "setting_id": "GFSB01_04",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_min_speed": [
+    "fan_min_speed": [
-		"25"
+        "25"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_retraction_speed": [
+    "filament_retraction_distances_when_cut": [
-		"0.4",
+        "18",
-		"0.4"
+        "18"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_speed": [
-		"0.95",
+        "0.4",
-		"0.95"
+        "0.4"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"18",
+        "0",
-		"18"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_restart_extra": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "textured_plate_temp_initial_layer": [
-	"filament_retract_when_changing_layer": [
+        "V"
-		"nil",
+    ],
-		"nil"
+    "compatible_printers": [
-	],
+        "Bambu Lab X1 0.6 nozzle"
-	"filament_retraction_length": [
+    ]
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp_initial_layer": [
-		"V"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 0.6 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json

@@ -1,121 +1,52 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1C 0.2 nozzle",
+    "name": "Bambu ASA @BBL X1C 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_01",
+    "setting_id": "GFSB01_01",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"2",
+        "2",
-		"2"
+        "2"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
-		"18",
+        "18",
-		"18"
+        "18"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_ramming_travel_time": [
-		"0.95",
+        "0",
-		"0.95"
+        "0"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "include": [
-		"nil",
+        "fdm_filament_template_direct_dual"
-		"nil"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_flush_temp": [
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_flush_volumetric_speed": [
+        "270",
-		"0",
+        "270"
-		"0"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_before_wipe": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_restart_extra": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retract_when_changing_layer": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
-		"nil",
+        "Bambu Lab P1S 0.2 nozzle",
-		"nil"
+        "Bambu Lab P1P 0.2 nozzle"
-	],
+    ]
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.2 nozzle",
-		"Bambu Lab P1S 0.2 nozzle",
-		"Bambu Lab P1P 0.2 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json

@@ -1,126 +1,65 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1C 0.4 nozzle",
+    "name": "Bambu ASA @BBL X1C 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_02",
+    "setting_id": "GFSB01_02",
-	"instantiation": "true",
+    "instantiation": "true",
-	"chamber_temperatures": [
+    "chamber_temperatures": [
-		"60"
+        "60"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "18",
-		"18"
+        "25"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_distances_when_cut": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"18",
+        "nil",
-		"18"
+        "0.4"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_z_hop": [
-		"nil",
+        "nil",
-		"nil"
+        "0.6"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_ramming_volumetric_speed": [
+        "0",
-		"-1",
+        "0"
-		"-1"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_when_changing_layer": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_length": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_minimum_travel": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
-		"nil",
+        "Bambu Lab X1 0.4 nozzle",
-		"nil"
+        "Bambu Lab P1P 0.8 nozzle",
-	],
+        "Bambu Lab P1S 0.4 nozzle",
-	"filament_retraction_speed": [
+        "Bambu Lab P1P 0.4 nozzle"
-		"nil",
+    ]
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.8 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json

@@ -1,127 +1,66 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1C",
+    "name": "Bambu ASA @BBL X1C",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_00",
+    "setting_id": "GFSB01_00",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_min_speed": [
+    "fan_min_speed": [
-		"25"
+        "25"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
-		"1",
+        "1",
-		"1"
+        "1"
-	],
+    ],
-	"filament_retraction_distances_when_cut": [
+    "filament_max_volumetric_speed": [
-		"18",
+        "18",
-		"18"
+        "25"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_retraction_distances_when_cut": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_retraction_length": [
-		"18",
+        "nil",
-		"18"
+        "0.4"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_z_hop": [
-		"nil",
+        "nil",
-		"nil"
+        "0.6"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_ramming_volumetric_speed": [
+        "0",
-		"-1",
+        "0"
-		"-1"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_restart_extra": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_when_changing_layer": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retraction_length": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_minimum_travel": [
+        "Bambu Lab X1 Carbon 0.6 nozzle",
-		"nil",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
-		"nil"
+        "Bambu Lab X1 0.8 nozzle",
-	],
+        "Bambu Lab P1S 0.8 nozzle",
-	"filament_retraction_speed": [
+        "Bambu Lab P1S 0.6 nozzle",
-		"nil",
+        "Bambu Lab P1P 0.6 nozzle"
-		"nil"
+    ]
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab P1P 0.6 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json

@@ -1,119 +1,50 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1E 0.2 nozzle",
+    "name": "Bambu ASA @BBL X1E 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_06",
+    "setting_id": "GFSB01_06",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "2",
-		"0.95"
+        "2"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "include": [
-		"1",
+        "fdm_filament_template_direct_dual"
-		"1"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_max_volumetric_speed": [
+        "0",
-		"2",
+        "0"
-		"2"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_when_changing_layer": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_distances_when_cut": [
+        "Bambu Lab X1E 0.2 nozzle"
-		"18",
+    ]
-		"18"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.2 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json

@@ -1,119 +1,50 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1E 0.4 nozzle",
+    "name": "Bambu ASA @BBL X1E 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_07",
+    "setting_id": "GFSB01_07",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "include": [
-		"1",
+        "fdm_filament_template_direct_dual"
-		"1"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_max_volumetric_speed": [
+        "0",
-		"18",
+        "0"
-		"18"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_when_changing_layer": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_distances_when_cut": [
+        "Bambu Lab X1E 0.4 nozzle"
-		"18",
+    ]
-		"18"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.4 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json

@@ -1,123 +1,54 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X1E",
+    "name": "Bambu ASA @BBL X1E",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_05",
+    "setting_id": "GFSB01_05",
-	"instantiation": "true",
+    "instantiation": "true",
-	"fan_min_speed": [
+    "fan_min_speed": [
-		"25"
+        "25"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "filament_long_retractions_when_cut": [
-		"nil",
+        "1",
-		"nil"
+        "1"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_max_volumetric_speed": [
-		"0.95",
+        "18",
-		"0.95"
+        "18"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "18",
-		"0"
+        "18"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"0",
+        "0",
-		"0"
+        "0"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "include": [
-		"1",
+        "fdm_filament_template_direct_dual"
-		"1"
+    ],
-	],
+    "long_retractions_when_ec": [
-	"filament_max_volumetric_speed": [
+        "0",
-		"18",
+        "0"
-		"18"
+    ],
-	],
+    "nozzle_temperature": [
-	"filament_ramming_volumetric_speed": [
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270"
-		"nil"
+    ],
-	],
+    "retraction_distances_when_ec": [
-	"filament_retract_restart_extra": [
+        "0",
-		"nil",
+        "0"
-		"nil"
+    ],
-	],
+    "slow_down_min_speed": [
-	"filament_retract_when_changing_layer": [
+        "20",
-		"nil",
+        "20"
-		"nil"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_distances_when_cut": [
+        "Bambu Lab X1E 0.6 nozzle",
-		"18",
+        "Bambu Lab X1E 0.8 nozzle"
-		"18"
+    ]
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.2 nozzle.json

@@ -1,293 +1,128 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X2D 0.2 nozzle",
+    "name": "Bambu ASA @BBL X2D 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_21",
+    "setting_id": "GFSB01_21",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0094"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "-0.0092"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.2258"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil",
+    ],
-		"nil",
+    "filament_cooling_before_tower": [
-		"nil"
+        "10",
-	],
+        "10",
-	"filament_enable_overhang_speed": [
+        "10",
-		"1",
+        "10"
-		"1",
+    ],
-		"1",
+    "filament_extruder_compatibility": [
-		"1"
+        "24"
-	],
+    ],
-	"filament_extruder_variant": [
+    "filament_flow_ratio": [
-		"Direct Drive Standard",
+        "0.95",
-		"Direct Drive High Flow",
+        "0.95",
-		"Bowden Standard",
+        "0.95",
-		"Bowden High Flow"
+        "0.95"
-	],
+    ],
-	"filament_flush_temp": [
+    "filament_flush_volumetric_speed": [
-		"0",
+        "3",
-		"0",
+        "3",
-		"0",
+        "3",
-		"0"
+        "3"
-	],
+    ],
-	"filament_flush_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"3",
+        "2",
-		"3",
+        "2",
-		"3",
+        "2",
-		"3"
+        "2"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil",
+        "0",
-		"nil",
+        "0",
-		"nil"
+        "0"
-	],
+    ],
-	"filament_overhang_1_4_speed": [
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "10",
-		"0",
+        "10",
-		"0",
+        "10",
-		"0"
+        "10"
-	],
+    ],
-	"filament_overhang_2_4_speed": [
+    "filament_tower_interface_print_temp": [
-		"50",
+        "270"
-		"50",
+    ],
-		"50",
+    "filament_wipe": [
-		"50"
+        "1",
-	],
+        "nil",
-	"filament_overhang_3_4_speed": [
+        "1",
-		"30",
+        "nil"
-		"30",
+    ],
-		"30",
+    "filament_wipe_distance": [
-		"30"
+        "1",
-	],
+        "nil",
-	"filament_overhang_4_4_speed": [
+        "1",
-		"10",
+        "nil"
-		"10",
+    ],
-		"10",
+    "filament_z_hop_types": [
-		"10"
+        "Spiral Lift",
-	],
+        "nil",
-	"filament_overhang_totally_speed": [
+        "Spiral Lift",
-		"10",
+        "nil"
-		"10",
+    ],
-		"10",
+    "hole_coef_2": [
-		"10"
+        "0.0013"
-	],
+    ],
-	"filament_bridge_speed": [
+    "hole_coef_3": [
-		"25",
+        "0.1261"
-		"25",
+    ],
-		"25",
+    "hole_limit_max": [
-		"25"
+        "0.1586"
-	],
+    ],
-	"filament_pre_cooling_temperature": [
+    "hole_limit_min": [
-		"0",
+        "0.1261"
-		"0",
+    ],
-		"0",
+    "include": [
-		"0"
+        "fdm_filament_template_direct_bowden"
-	],
+    ],
-	"filament_pre_cooling_temperature_nc": [
+    "nozzle_temperature": [
-		"0",
+        "270",
-		"0",
+        "270",
-		"0",
+        "270",
-		"0"
+        "270"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "nozzle_temperature_initial_layer": [
-		"0",
+        "270",
-		"0",
+        "270",
-		"0",
+        "270",
-		"0"
+        "270"
-	],
+    ],
-	"filament_retract_length_nc": [
+    "retraction_distances_when_ec": [
-		"14",
+        "3",
-		"14",
+        "3",
-		"14",
+        "4",
-		"14"
+        "4"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "slow_down_min_speed": [
-		"-1",
+        "20",
-		"-1",
+        "20",
-		"-1",
+        "20",
-		"-1"
+        "20"
-	],
+    ],
-	"filament_ramming_volumetric_speed_nc": [
+    "compatible_printers": [
-		"-1",
+        "Bambu Lab X2D 0.2 nozzle"
-		"-1",
+    ],
-		"-1",
+    "filament_start_gcode": [
-		"-1"
+        "; filament start gcode\n"
-	],
+    ]
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0094"
-	],
-	"counter_coef_3": [
-		"-0.0092"
-	],
-	"counter_limit_max": [
-		"0.2258"
-	],
-	"counter_limit_min": [
-		"-0.0092"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2",
-		"2",
-		"2"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"0.0013"
-	],
-	"hole_coef_3": [
-		"0.1261"
-	],
-	"hole_limit_max": [
-		"0.1586"
-	],
-	"hole_limit_min": [
-		"0.1261"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.4 nozzle.json

@@ -1,293 +1,157 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X2D 0.4 nozzle",
+    "name": "Bambu ASA @BBL X2D 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_22",
+    "setting_id": "GFSB01_22",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0094"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "-0.0092"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.2258"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil",
+    ],
-		"nil",
+    "filament_cooling_before_tower": [
-		"nil"
+        "10",
-	],
+        "10",
-	"filament_enable_overhang_speed": [
+        "10",
-		"1",
+        "10",
-		"1",
+        "10",
-		"1",
+        "10"
-		"1"
+    ],
-	],
+    "filament_extruder_compatibility": [
-	"filament_extruder_variant": [
+        "24"
-		"Direct Drive Standard",
+    ],
-		"Direct Drive High Flow",
+    "filament_flow_ratio": [
-		"Bowden Standard",
+        "0.95",
-		"Bowden High Flow"
+        "0.95",
-	],
+        "0.95",
-	"filament_flush_temp": [
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95"
-		"0",
+    ],
-		"0"
+    "filament_max_volumetric_speed": [
-	],
+        "18",
-	"filament_flush_volumetric_speed": [
+        "25",
-		"0",
+        "18",
-		"0",
+        "18",
-		"0",
+        "20",
-		"0"
+        "18"
-	],
+    ],
-	"filament_long_retractions_when_cut": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil",
+        "0",
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_overhang_1_4_speed": [
+        "0"
-		"0",
+    ],
-		"0",
+    "filament_retraction_distances_when_cut": [
-		"0",
+        "10",
-		"0"
+        "10",
-	],
+        "10",
-	"filament_overhang_2_4_speed": [
+        "10",
-		"50",
+        "10",
-		"50",
+        "10"
-		"50",
+    ],
-		"50"
+    "filament_retraction_length": [
-	],
+        "0.4",
-	"filament_overhang_3_4_speed": [
+        "0.4",
-		"30",
+        "0.4",
-		"30",
+        "nil",
-		"30",
+        "nil",
-		"30"
+        "nil"
-	],
+    ],
-	"filament_overhang_4_4_speed": [
+    "filament_tower_interface_print_temp": [
-		"10",
+        "270"
-		"10",
+    ],
-		"10",
+    "filament_wipe": [
-		"10"
+        "1",
-	],
+        "1",
-	"filament_overhang_totally_speed": [
+        "1",
-		"10",
+        "1",
-		"10",
+        "1",
-		"10",
+        "1"
-		"10"
+    ],
-	],
+    "filament_wipe_distance": [
-	"filament_bridge_speed": [
+        "1",
-		"25",
+        "1",
-		"25",
+        "1",
-		"25",
+        "1",
-		"25"
+        "1",
-	],
+        "1"
-	"filament_pre_cooling_temperature": [
+    ],
-		"0",
+    "filament_z_hop_types": [
-		"0",
+        "Spiral Lift",
-		"0",
+        "Spiral Lift",
-		"0"
+        "Spiral Lift",
-	],
+        "Spiral Lift",
-	"filament_pre_cooling_temperature_nc": [
+        "Spiral Lift",
-		"0",
+        "Spiral Lift"
-		"0",
+    ],
-		"0",
+    "hole_coef_2": [
-		"0"
+        "0.0013"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "hole_coef_3": [
-		"0",
+        "0.1261"
-		"0",
+    ],
-		"0",
+    "hole_limit_max": [
-		"0"
+        "0.1586"
-	],
+    ],
-	"filament_retract_length_nc": [
+    "hole_limit_min": [
-		"14",
+        "0.1261"
-		"14",
+    ],
-		"14",
+    "include": [
-		"14"
+        "fdm_filament_template_direct_bowden_e3d"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "nozzle_temperature": [
-		"-1",
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270",
-		"-1"
+        "270",
-	],
+        "270",
-	"filament_ramming_volumetric_speed_nc": [
+        "270"
-		"-1",
+    ],
-		"-1",
+    "nozzle_temperature_initial_layer": [
-		"-1",
+        "270",
-		"-1"
+        "270",
-	],
+        "270",
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270",
-		"nil",
+        "270"
-		"nil",
+    ],
-		"nil"
+    "retraction_distances_when_ec": [
-	],
+        "3",
-	"filament_retract_restart_extra": [
+        "3",
-		"nil",
+        "3",
-		"nil",
+        "4",
-		"nil",
+        "4",
-		"nil"
+        "4"
-	],
+    ],
-	"filament_retract_when_changing_layer": [
+    "slow_down_min_speed": [
-		"nil",
+        "20",
-		"nil",
+        "20",
-		"nil",
+        "20",
-		"nil"
+        "20",
-	],
+        "20",
-	"filament_retraction_distances_when_cut": [
+        "20"
-		"10",
+    ],
-		"10",
+    "temperature_vitrification": [
-		"10",
+        "100"
-		"10"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_length": [
+        "Bambu Lab X2D 0.4 nozzle"
-		"0.4",
+    ],
-		"0.4",
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ]
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0094"
-	],
-	"counter_coef_3": [
-		"-0.0092"
-	],
-	"counter_limit_max": [
-		"0.2258"
-	],
-	"counter_limit_min": [
-		"-0.0092"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"25",
-		"18",
-		"20"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"0.0013"
-	],
-	"hole_coef_3": [
-		"0.1261"
-	],
-	"hole_limit_max": [
-		"0.1586"
-	],
-	"hole_limit_min": [
-		"0.1261"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.8 nozzle.json

@@ -0,0 +1,149 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA @BBL X2D 0.8 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_50",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "fan_min_speed": [
+        "25"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "80"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_extruder_compatibility": [
+        "24"
+    ],
+    "filament_flow_ratio": [
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95"
+    ],
+    "filament_flush_temp_fast": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "35",
+        "18",
+        "18"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_tower_interface_print_temp": [
+        "270"
+    ],
+    "filament_wipe": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift",
+        "nil"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_bowden"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
+        "270",
+        "270"
+    ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "4",
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X2D 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL X2D.json

@@ -1,297 +1,157 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @BBL X2D",
+    "name": "Bambu ASA @BBL X2D",
-	"inherits": "Bambu ASA @base",
+    "inherits": "Bambu ASA @base",
-	"from": "system",
+    "from": "system",
-	"setting_id": "GFSB01_20",
+    "setting_id": "GFSB01_20",
-	"instantiation": "true",
+    "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "65"
-		"0",
+    ],
-		"0",
+    "counter_coef_2": [
-		"0"
+        "0.0094"
-	],
+    ],
-	"filament_cooling_before_tower": [
+    "counter_coef_3": [
-		"10",
+        "-0.0092"
-		"10",
+    ],
-		"10",
+    "counter_limit_max": [
-		"10"
+        "0.2258"
-	],
+    ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil",
+    ],
-		"nil",
+    "fan_min_speed": [
-		"nil"
+        "25"
-	],
+    ],
-	"filament_enable_overhang_speed": [
+    "filament_cooling_before_tower": [
-		"1",
+        "10",
-		"1",
+        "10",
-		"1",
+        "10",
-		"1"
+        "10",
-	],
+        "10",
-	"filament_extruder_variant": [
+        "10"
-		"Direct Drive Standard",
+    ],
-		"Direct Drive High Flow",
+    "filament_extruder_compatibility": [
-		"Bowden Standard",
+        "24"
-		"Bowden High Flow"
+    ],
-	],
+    "filament_flow_ratio": [
-	"filament_flush_temp": [
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95",
-		"0",
+        "0.95",
-		"0"
+        "0.95",
-	],
+        "0.95"
-	"filament_flush_volumetric_speed": [
+    ],
-		"0",
+    "filament_max_volumetric_speed": [
-		"0",
+        "18",
-		"0",
+        "35",
-		"0"
+        "18",
-	],
+        "18",
-	"filament_long_retractions_when_cut": [
+        "18",
-		"nil",
+        "18"
-		"nil",
+    ],
-		"nil",
+    "filament_ramming_travel_time": [
-		"nil"
+        "0",
-	],
+        "0",
-	"filament_overhang_1_4_speed": [
+        "0",
-		"0",
+        "0",
-		"0",
+        "0",
-		"0",
+        "0"
-		"0"
+    ],
-	],
+    "filament_retraction_distances_when_cut": [
-	"filament_overhang_2_4_speed": [
+        "10",
-		"50",
+        "10",
-		"50",
+        "10",
-		"50",
+        "10",
-		"50"
+        "10",
-	],
+        "10"
-	"filament_overhang_3_4_speed": [
+    ],
-		"30",
+    "filament_retraction_length": [
-		"30",
+        "0.4",
-		"30",
+        "nil",
-		"30"
+        "0.4",
-	],
+        "nil",
-	"filament_overhang_4_4_speed": [
+        "nil",
-		"10",
+        "nil"
-		"10",
+    ],
-		"10",
+    "filament_tower_interface_print_temp": [
-		"10"
+        "270"
-	],
+    ],
-	"filament_overhang_totally_speed": [
+    "filament_wipe": [
-		"10",
+        "1",
-		"10",
+        "nil",
-		"10",
+        "1",
-		"10"
+        "1",
-	],
+        "nil",
-	"filament_bridge_speed": [
+        "1"
-		"25",
+    ],
-		"25",
+    "filament_wipe_distance": [
-		"25",
+        "1",
-		"25"
+        "nil",
-	],
+        "1",
-	"filament_pre_cooling_temperature": [
+        "1",
-		"0",
+        "nil",
-		"0",
+        "1"
-		"0",
+    ],
-		"0"
+    "filament_z_hop_types": [
-	],
+        "Spiral Lift",
-	"filament_pre_cooling_temperature_nc": [
+        "nil",
-		"0",
+        "Spiral Lift",
-		"0",
+        "Spiral Lift",
-		"0",
+        "nil",
-		"0"
+        "Spiral Lift"
-	],
+    ],
-	"filament_ramming_travel_time_nc": [
+    "hole_coef_2": [
-		"0",
+        "0.0013"
-		"0",
+    ],
-		"0",
+    "hole_coef_3": [
-		"0"
+        "0.1261"
-	],
+    ],
-	"filament_retract_length_nc": [
+    "hole_limit_max": [
-		"14",
+        "0.1586"
-		"14",
+    ],
-		"14",
+    "hole_limit_min": [
-		"14"
+        "0.1261"
-	],
+    ],
-	"filament_ramming_volumetric_speed": [
+    "include": [
-		"-1",
+        "fdm_filament_template_direct_bowden_e3d"
-		"-1",
+    ],
-		"-1",
+    "nozzle_temperature": [
-		"-1"
+        "270",
-	],
+        "270",
-	"filament_ramming_volumetric_speed_nc": [
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270",
-		"-1",
+        "270"
-		"-1"
+    ],
-	],
+    "nozzle_temperature_initial_layer": [
-	"filament_retract_before_wipe": [
+        "270",
-		"nil",
+        "270",
-		"nil",
+        "270",
-		"nil",
+        "270",
-		"nil"
+        "270",
-	],
+        "270"
-	"filament_retract_restart_extra": [
+    ],
-		"nil",
+    "retraction_distances_when_ec": [
-		"nil",
+        "3",
-		"nil",
+        "3",
-		"nil"
+        "3",
-	],
+        "4",
-	"filament_retract_when_changing_layer": [
+        "4",
-		"nil",
+        "4"
-		"nil",
+    ],
-		"nil",
+    "slow_down_min_speed": [
-		"nil"
+        "20",
-	],
+        "20",
-	"filament_retraction_distances_when_cut": [
+        "20",
-		"10",
+        "20",
-		"10",
+        "20",
-		"10",
+        "20"
-		"10"
+    ],
-	],
+    "compatible_printers": [
-	"filament_retraction_length": [
+        "Bambu Lab X2D 0.6 nozzle"
-		"0.4",
+    ],
-		"nil",
+    "filament_start_gcode": [
-		"nil",
+        "; filament start gcode\n"
-		"nil"
+    ]
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0094"
-	],
-	"counter_coef_3": [
-		"-0.0092"
-	],
-	"counter_limit_max": [
-		"0.2258"
-	],
-	"counter_limit_min": [
-		"-0.0092"
-	],
-	"fan_min_speed": [
-		"25"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"35",
-		"18",
-		"18"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"0.0013"
-	],
-	"hole_coef_3": [
-		"0.1261"
-	],
-	"hole_limit_max": [
-		"0.1586"
-	],
-	"hole_limit_min": [
-		"0.1261"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
 }

resources/profiles/BBL/filament/Bambu ASA @base.json

@@ -1,57 +1,54 @@
 {
-	"type": "filament",
+    "type": "filament",
-	"name": "Bambu ASA @base",
+    "name": "Bambu ASA @base",
-	"inherits": "fdm_filament_asa",
+    "inherits": "fdm_filament_asa",
-	"from": "system",
+    "from": "system",
-	"filament_id": "OFfBpSRI",
+    "filament_id": "OFfBpSRI",
-	"instantiation": "false",
+    "instantiation": "false",
-	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
-	"eng_plate_temp": [
+    "eng_plate_temp": [
-		"100"
+        "100"
-	],
+    ],
-	"eng_plate_temp_initial_layer": [
+    "eng_plate_temp_initial_layer": [
-		"100"
+        "100"
-	],
+    ],
-	"fan_max_speed": [
+    "fan_max_speed": [
-		"35"
+        "35"
-	],
+    ],
-	"filament_cost": [
+    "filament_cost": [
-		"31.99"
+        "26.99"
-	],
+    ],
-	"filament_density": [
+    "filament_density": [
-		"1.05"
+        "1.05"
-	],
+    ],
-	"filament_flow_ratio": [
+    "filament_flow_ratio": [
-		"0.95"
+        "0.95"
-	],
+    ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
-		"18"
+        "18"
-	],
+    ],
-	"filament_vendor": [
+    "filament_vendor": [
-		"Bambu Lab"
+        "Bambu Lab"
-	],
+    ],
-	"hot_plate_temp": [
+    "hot_plate_temp": [
-		"100"
+        "100"
-	],
+    ],
-	"hot_plate_temp_initial_layer": [
+    "hot_plate_temp_initial_layer": [
-		"100"
+        "100"
-	],
+    ],
-	"impact_strength_z": [
+    "nozzle_temperature": [
-		"4.9"
+        "270"
-	],
+    ],
-	"nozzle_temperature": [
+    "nozzle_temperature_initial_layer": [
-		"270"
+        "270"
-	],
+    ],
-	"nozzle_temperature_initial_layer": [
+    "slow_down_layer_time": [
-		"270"
+        "12"
-	],
+    ],
-	"slow_down_layer_time": [
+    "textured_plate_temp": [
-		"12"
+        "100"
-	],
+    ],
-	"textured_plate_temp": [
+    "textured_plate_temp_initial_layer": [
-		"100"
+        "100"
-	],
+    ]
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
 }