* Change ironing angle setting to be an offset angle from the top surface angle rather offset from the layer 0 angle that changes on each layer.
* Change Ironing angle offset range from [-1,359] to [0,359].
-1 is redundant because it is the same behavior as 0 offset.
* Change ironing_angle new default value to 0.
* Update existing print profiles' hardcoded ironing_angles from -1 to 0 to reflect new default value.
* Add migration for old -1 ironing_angle settings. Remove logic for -1 ironing_angle.
* Add u8 prefix for degree symbol string
* Use solid_infill_direction instead of infill_direction for top surface infill direction. Use calculate_infill_rotation_angle to add offset to solid_infill_rotate_template if used.
* Update quality settings wiki for Ironing
* Set f->is_using_template_angle when making ironing filler objects
* Update quality_settings_ironing link from #angle to #angle-offset
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Imported Artillery M1 Pro profiles from ArtilleryStudio
* Removed duplicate overhang_fan_speed - keeping 90 as other profiles
* Replace by octo/klipper as it seems Artillery made a custom host_type on ArtilleryStudio...
* Changed sparse_infill_pattern to gyroid for M1 profile, as suggested
* Update Artillery Genius & Sidewinder profiles
- Fixed bed-size of Genius (Pro) profile.
- Fixed default retraction values for the Artillery Genius (Pro) 0.4 profile,
which were set too high for this direct-drive machine.
- Slightly increased default retraction value for Sidewinder X1 & X2, to match
the Genius profiles. Tested values on all machines.
- Matching minimum layer height for Genius & Sidewinder profiles.
- Fixed line endings & indentation.
1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas
2. Change default sparse_infill_pattern vaule to ipCrossHatch
* Add & revise FLSun Profile
FLSun Q5
FLSun QQ-S Pro
* Patch Artillery Sidewinder X2 profile
revision speed parameters
revision start & end code
* change Anycubic 4Max Pro image
* Adjustments to the profile of the Anycubic 4Max Pro
Preparation for adding more Anycubic printers
* add more Anycubic profiles
* Changes:
Improve precise wall
Port PS2.6 overhang slowdown feature
Implement overhang fan for new overhang slowdown algo
Add option to switch between classic/new overhang slowdown implementation
Set Arachne as default engine
Small adjustment of temp calibration range
turn off small perimeter by default
Small UI tweaks
Change default top_surface_pattern to monotonic
Fine tune jerk
Signed-off-by: SoftFever <softfeverever@gmail.com>
* Disable optimizations for RelWithDebInfo
Signed-off-by: SoftFever <softfeverever@gmail.com>
* fix an issue that max volumetirc/vfa calibration can't send to print
Signed-off-by: SoftFever <softfeverever@gmail.com>
#322
* fix build errors
Signed-off-by: SoftFever <softfeverever@gmail.com>
---------
Signed-off-by: SoftFever <softfeverever@gmail.com>
