* Add Optimized Gyroid infill (auto-tuned wavelength + amplitude)
New infill geometry derived from FillGyroid. Two parameters are
auto-computed per-region from density, line spacing, and layer height
(no user inputs):
omega = sqrt(density_adj) / sqrt(1 + layer_height/spacing)
clamped to [0.5, 2.0]
-- Euler-Bernoulli buckling: critical load ~ 1/L^2,
so shorter wavelength under higher load (denser infill)
raises buckling resistance.
amplitude = 0.55 / omega^2, clamped to [0.20, 0.65]
-- Curved-beam bending stress: peak stress ~ A * omega^2,
so amplitude is reduced as omega rises to keep peak
fiber stress bounded while preserving stiffness.
Files:
- src/libslic3r/Fill/FillOptimizedGyroid.{hpp,cpp} (new)
- src/libslic3r/Fill/FillBase.cpp (factory case)
- src/libslic3r/Fill/Fill.cpp (switch case)
- src/libslic3r/Layer.cpp (switch case)
- src/libslic3r/PrintConfig.{hpp,cpp} (enum + label)
- src/libslic3r/CMakeLists.txt (build sources)
User-facing: appears as "Optimized Gyroid" in the Fill Pattern dropdown.
Density still chosen by user; omega/amplitude are internal.
* Fix build: layer_height is in FillParams, not Fill base
* Add ipOptimizedGyroid to multiline infill list in ConfigManipulation
* Refactor: replace ipOptimizedGyroid enum with gyroid_optimized boolean
Per @RF47's review feedback, fold the optimized wave math into FillGyroid
itself behind a per-region boolean instead of a separate infill enum.
What changes:
- New ConfigOptionBool "gyroid_optimized" on PrintRegionConfig (default
false). When unchecked, gyroid behavior is byte-identical to before.
- Optimized wave math (compute_omega_factor, compute_amplitude_factor,
f_opt, make_*_opt, make_optimized_gyroid_waves) lives inside
FillGyroid.cpp. _fill_surface_single branches on params.gyroid_optimized.
- FillParams gains a bool gyroid_optimized field, populated in Fill.cpp
from region_config alongside fill_multiline.
- UI checkbox added under Strength > Infill in Tab.cpp, label
"Optimize gyroid wave (experimental)". Toggle is hidden by
ConfigManipulation when sparse_infill_pattern != ipGyroid.
- "gyroid_optimized" added to s_Preset_print_options for preset I/O.
What goes away:
- ipOptimizedGyroid enum value, factory case, switch cases, dropdown
label, string key.
- FillOptimizedGyroid.cpp / FillOptimizedGyroid.hpp (math moved into
FillGyroid.cpp).
- Net diff drops by ~250 lines.
Existing profiles using gyroid are unaffected.
* Wire gyroid_optimized through SurfaceFillParams to FillParams
Linux build failed because line 921 in Fill.cpp populates a
SurfaceFillParams (the dedup struct), not FillParams directly.
Add the field there, in operator< / operator==, and copy it to
FillParams at both conversion sites.
* Use toggle_line for gyroid_optimized: hide row when pattern != gyroid
* Account for multiline wall thickness in omega correction (per @RF47)
When fill_multiline = N, each gyroid wall is N lines thick, so the
geometric scale fed into the buckling correction term should be
spacing * N rather than spacing. Increases omega (tighter wavelength)
when multiline is enabled, consistent with the thicker wall being
more buckling-resistant.
* Optimized gyroid via marching squares on the implicit scalar field
Per @RF47 review: replace the analytical f_opt / make_one_period_opt
wave generator (which had visible kinks at vertical-horizontal
transitions) with a marching-squares iso-extraction on the gyroid
scalar field, modeled on FillTpmsFK.cpp.
- New marchsq::GyroidField in FillGyroid.cpp evaluates
F(x,y,z) = sin(fx*x)cos(fy*y) + sin(fy*y)cos(fz*z) + sin(fz*z)cos(fx*x)
where fx = omega * baseline (anisotropic in x), fy = fz = baseline.
- get_gyroid_polylines() runs marching squares at iso=0 and converts
rings to polylines.
- _fill_surface_single() optimized branch now builds GyroidField,
runs marching squares, and skips the bb.min translate (field
output is already in absolute coords).
- Dropped: f_opt, make_one_period_opt, make_wave_opt,
make_optimized_gyroid_waves, compute_amplitude_factor. Amplitude
has no clean analog in iso-zero extraction.
- Standard (non-optimized) gyroid path unchanged.
* Mass calibration: compensate period by cbrt(omega) for x-anisotropic field
Per @RF47: optimized vs standard gyroid had different masses at the
same sparse_infill_density setting. Cause: scaling fx by omega while
leaving fy=fz at the baseline raised the surface-area-to-volume ratio
by approximately omega^(1/3) (the geometric mean of the three
frequencies).
Fix: multiply the base period by cbrt(omega) so the geometric mean of
(fx, fy, fz) returns to the standard baseline. Net effect:
fx = omega^(2/3) * baseline_orig
fy = fz = omega^(-1/3) * baseline_orig
which preserves total mass at the same density setting while
preserving the load-direction anisotropy this PR introduces.
* Switch optimized gyroid anisotropy from X to Z (per @RF47)
Z is the typical compression-load axis for FFF parts and is not at
delamination risk under compression — so the dominant failure mode
is column buckling of the vertical strands themselves. Tightening
fz directly shortens the effective vertical strand length, which
improves Z-axis buckling resistance.
Mass calibration via cbrt(omega) period compensation still applies
(scaling exactly one of three frequencies by omega; the geometric-
mean preservation argument is symmetric across axes).
* Update src/slic3r/GUI/Tab.cpp
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Address review feedback (Copilot + @RF47)
- Fill.cpp: gate params.gyroid_optimized on (params.pattern == ipGyroid)
so non-gyroid surfaces don't differ in SurfaceFillParams by an
irrelevant flag (would unnecessarily split fill batching).
[Copilot suggestion, RF47 confirmed correct]
- PrintConfig.cpp: drop "amplitude" from the tooltip; only wavelength
is parameterized (the marching-squares iso=0 extraction is invariant
to a uniform field scale, so amplitude has no effect).
- FillBase.hpp: shorten gyroid_optimized comment to match the actual
carried state (no amplitude term).
- FillGyroid.cpp: shorten the marchsq namespace comment block; the
ODR concern was overstated (FillTpmsFK uses the same pattern fine).
* Drop redundant marchsq bb expansion (Copilot)
bb is already offset by 10 * scale_(spacing) above for edge-artifact
margin; the second offset on bb_field doubled the raster area for no
geometric benefit and hurt CPU time on large parts.
* Update src/slic3r/GUI/Tab.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Fix density mismatch + rename to Z-buckling bias optimization
Issue (per @ianalexis): at the same sparse_infill_density setting,
the optimized branch produced denser fill than standard. Verified via
Python sim (sim_gyroid_compare.py) using marching squares on the
implicit field across multiple z slices.
Root cause: the omega formula was inverted from the buckling-physics
intent. The naive sqrt(density_adj) factor produced omega < 1 at
typical print densities (10-30%), which LENGTHENED the Z wavelength
instead of shortening it -- net loss in both mass and strength.
Fix:
- compute_omega_factor: invert to sqrt(1 / density_adj), clamp to
[1.0, 2.0]. Now omega = 2.0 at low density (long strands need
most help) and clamps to 1.0 above ~30% density (no-op, since
standard gyroid is already short enough).
- Remove the cbrt(omega) period compensation. Empirically (sim
table embedded in FillGyroid.cpp comment) the inverted formula
keeps line length per area at ~1.000 of standard across all
densities with no period scaling needed.
Predicted gains (sim, Z-axis Euler buckling proxy):
density line/std strength/std
10% 1.000 2.84x
15% 1.000 1.89x
20% 1.000 1.42x
30%+ 1.000 1.00x (no-op)
Rename per @ianalexis: "Optimize gyroid wave" oversells (now no-op
above 30% density and Z-only). Renamed user-facing label to
"Z-buckling bias optimization (experimental)" with updated tooltip
that scopes to vertical compression and discloses the density cutoff.
Internal config key (gyroid_optimized) unchanged for diff size.
Real-world Instron compression tests at Brown's Prince Lab to follow.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Added UI force-sync button and fixed bug that didn't sync in one case and caused orange highlight
* Fix sync preset race: join old thread before starting new one
---------
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* feat: add UI feedback on http error and some logs
* spelling fix
* show error dialog only once per session
* show errors with plater notification when on developer mode
* remove return
* remove irrelevant logs
GridCellSupportEditor::DoActivate dereferenced
grid->GetSelectedBlocks().begin() without checking against end(). In
wxWidgets 3.1.5 that range always contained at least one block; in 3.3.2
it is empty after the user deselects, and the dereference crashes inside
wxGridBlockCoords::GetLeftCol().
Fall back to the (row, col) that triggered activation when the selection
is empty, so the existing single-cell branch handles it. While here,
drop a dead local_table cast that was never read.
Fix macOS orcaslicer:// deep links after wxWidgets 3.3.2 upgrade
Install an OrcaSlicer-owned kAEGetURL Apple Event handler from
on_init_inner(). The wxWidgets 3.3.2 handler registered in
applicationWillFinishLaunching: stopped delivering URL events to
GUI_App::MacOpenURL on macOS (#13119), so links from Printables /
Thingiverse opened a blank project instead of importing the model.
Registering our own handler late in startup is last-writer-wins on
NSAppleEventManager and routes back to the existing MacOpenURL ->
start_download path, restoring the pre-upgrade behavior without
touching wxWidgets.
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Use glBlendFuncSeparate in GLTexture::render_sub_texture so destination
alpha stays at 1.0. The Wayland compositor honors framebuffer alpha for window compositing; the previous straight-alpha blend reduced dst alpha
at anti-aliased icon edges, making them semi-transparent against the
desktop. RGB blending is unchanged, so X11/Windows/macOS are unaffected.
Delay opening the object-list filament dropdown on wxGTK until the editor
window is mapped, avoiding popup creation without a valid native toplevel.
Also set the GTK transient parent for dropdown popups created from data-view
cell editors.
# Description
Currently, there is some suspicious behavior going on with the logout
flow, adding some logs to potentially catch any unwanted logouts or
unintentional behaviors.
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* unify footer
adds "Done" Buttons,
standardize "Reset" Buttons,
adds disabled logic to "Reset" Buttons
* adds ImGuiWrapper::COL_WARNING = ColorRGB:Warning,
replaces ColorRGB::Warning
* consistently display warnings,
moves assermbly warning after footer,
make cut warnings warning color
* adds separator above cut warnings
* adds tooltip entry in move, rotate & scale for auto-drop
* use wrapper tooltip in wrapper->button for consistent text color
* restructures brim ears button,
renames "Reset" button in painting tools to "Erase All",
small styling fixes
* small adjustments,
moves "Edge detection" checkbox in painting tool underneath,
moves "Section View" in Brim ears tool after buttons,
moves warnings in Assemble tool under footer
* small brim ear tool structure changes,
adds separator between "Head Diameter" and "Max angle",
adds tooltip to "Auto-generate" button,
rewords shortcut descriptions to match other tools
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
* adds UI and preview plane for multiple dovetail cuts
* adds multiple dovetail cuts to perform_with_groove()
* adds ui text info for spacing, adjusts max_val for gap to respect plate dimensions
* adds spacing before multpile UI
* adjusts wording, adjust gap max by count
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add logic to handle the left, middle and right buttons being assigned to do nothing, pan or rotate
* Add entries for setting the drag actions to preferences
* Allow the label text in preferences to wrap
* Show mouse mappings in Help -> Keyboard Shortcuts
* Re-add preferences in updated layout
* Add camera mouse options under camera
* Change mouse action strings to use L() for localization
* Display "None" when it is selected instead of blank in keyboard shortcuts
---------
Co-authored-by: Rob O <robertolabode@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
load_selections() and update_selections() size the parallel project_config
arrays (filament_colour, filament_colour_type, filament_map) off
filament_presets.size(). When the saved list is shorter than the printer's
nozzle count — never-used printer, hand-trimmed conf, or fewer filament_NN
entries than nozzles — the loaded colors get truncated and the sidebar
starts up one combo short.
## Summary
- skip CLI thumbnail generation when an OpenGL/GLFW context cannot be
created, allowing export workflows to continue in headless/automation
environments
- guard filament variant remapping against missing config options and
out-of-range variant indexes
- log warnings instead of dereferencing invalid config state during
CLI/profile-driven export
## Context
These guards came out of automating OrcaSlicer CLI exports for printer
workflows. In that flow, slicing/export can still be valid even when
thumbnail rendering is unavailable, but the current path can proceed
into OpenGL thumbnail setup after context creation fails. Separately,
malformed or mismatched filament/profile state can index past option
vectors during multi-filament value remapping.
## Test plan
- `git diff --check`
- `cmake --build build/arm64 --config RelWithDebInfo --target OrcaSlicer
-- -j4`
# Description
Fixes a macOS object-list filament editor crash/glitch where the
filament column could enter Cocoa native text editing and expose
`wxCustomRendererObject: 0x...` or crash while committing an invalid
`DataViewBitmapText` value.
The visible `wxCustomRendererObject` glitch was observed on macOS
through Cocoa `wxDataViewCtrl` editing. The underlying unsafe
assignment/variant/editor assumptions are not inherently macOS-only, so
the defensive data-path fixes are cross-platform.
Changes:
- Adds an explicit `DataViewBitmapText` assignment operator that avoids
copying the `wxObject` base, matching the existing copy constructor.
- Rejects unexpected variant types before reading object-list
name/filament values as `DataViewBitmapText`.
- Hardens filament editor value extraction against unexpected editor
controls.
- On macOS, routes filament-column editing through the custom
bitmap-choice renderer instead of `wxDataViewCtrl::EditItem()`, avoiding
native text editing of `wxCustomRendererObject`.
Fixes https://github.com/OrcaSlicer/OrcaSlicer/issues/13682
Previous PR with conversation:
[#13684](https://github.com/OrcaSlicer/OrcaSlicer/pull/13684)
This should fix the crash observed by @Noisyfox as we're addressing the
underlying problem of presenting the `wxCustomRendererObject`.
## Tests
Validated on macOS arm64. Repeated double-click/edit attempts on an
unselected object's filament cell no longer show
`wxCustomRendererObject` and no crash reproduced.
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
This can be enabled in Preference->Developer->Keep painted feature after
mesh change.
<img width="731" height="633" alt="init"
src="https://github.com/user-attachments/assets/8b195486-538e-4eda-9e77-bfdf1a794306"
/>
TODO:
- [ ] Bug fixes
- [ ] Make it faster
- Keep painting after other mesh operations such as reload from
disk/simplify/boolean operation etc:
- [x] Planar cut
- [x] Dovetail cut
- [x] Cut with part assigned to other side
- [x] Split to parts
- [x] Split to objects
- [x] Mesh boolean gizmo
- [x] Mesh boolean in right click
- [x] Reload from disk/replace stl (won't work well if mesh changed too
much)
- [x] Fix model
- [x] Simplify/smooth (this two won't work well due to too much mesh
changes)
- [x] Add options in settings since I think this will be experimental
for a long time until being tested by a lot of ppl
* Expose Antialiasing velues
Expose Antialiasing multipliers.
Default to 4 as current implementation but enables the user to disable it to improve performante or increase sampling to improve quality.
* FXAA
* Improve descriptions
* Require restart when MSAA setting changes
Detect changes to the OpenGL MSAA (multisample anti-aliasing) preference when opening Preferences and prompt the user to restart the application to apply the change. Adds a constant key for the MSAA setting, stores the previous value, checks for changes (similar to the existing FXAA handling), and shows a warning dialog explaining the restart will close the current project without saving. If the user accepts, recreate_GUI is invoked to apply the MSAA change immediately.
* Revert "Require restart when MSAA setting changes"
This reverts commit dde134d346c3849598c91d025d2faed1b51c8a22.
* Menu and FPS options
* Fix FPS limiter and remove VSYNC
* Grouped FPS settings and mode up rigth fps counter
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
FlowRateCalibrationDialog was missing the SetSizeHints call that every
other calibration dialog in calib_dlg.cpp uses (Cornering, Pa, Pa Pattern,
Max Volumetric Speed, Temperature, Retraction, VFA, Input Shaping). Without
it, the dialog has no enforced minimum size: on wxGTK, iconizing the main
window while the dialog is open triggers a layout/refresh that re-runs
Fit() with transient zero-sized children, collapsing the dialog to ~222x249
px with the OK button clipped and unreachable. The window manager then
honors the (incorrect) small geometry hint, so the user cannot resize it
back manually.
Two changes:
* Add v_sizer->SetSizeHints(this) after Fit() in the constructor, matching
the pattern used by all other dialogs in this file. This locks in the
correct minimum the first time Fit() runs, before any iconize event.
* Remove the redundant Fit() from on_dpi_changed. With SetSizeHints in
place the WM enforces the minimum, but the unconditional Fit() on every
DPI/refresh signal was the trigger for the shrink path; Refresh() alone
is sufficient here.
Co-authored-by: Packerlschupfer <packerl@schupfer.at>
* Add tooltips to Transfer buttons
Set contextual tooltips for the Discard, Transfer and Save buttons when a dependent preset is present. The code computes the previous and new profile names and provides localized explanatory tooltips that clarify that switching will discard changes, transfer "New Value" settings, or save changes into the current profile. This improves UX by making the consequences of each action explicit.
* added some endlines
Co-Authored-By: yw4z <yw4z@outlook.com>
---------
Co-authored-by: yw4z <yw4z@outlook.com>
