# Description
Changing a slicing plugin's configuration had no effect on the sliced
result until you forced a re-slice some other way; it now applies
immediately. Print, printer and filament presets also keep their plugin
configuration separately, so configuring a plugin on one no longer wipes
out what you set on another.
A plugin's custom configuration page gets the same round of improvements
in both the Plugins dialog and the per-preset dialog: it follows the
app's light/dark theme, keeps its state while you edit instead of
resetting under the cursor, and can tell whether it is being edited
globally or for a preset, so "Restore defaults" can be labeled for what
it will actually do. The two bundled examples show this off — Twistify
now ships a custom configuration UI, and Inspector is themed, groups
# Screenshots/Recordings/Graphs
https://github.com/user-attachments/assets/02ca062a-5143-49a3-abe0-a2a040b3a928
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
When a per-layer nozzle grouping migrates a filament across nozzle
variants, the write-back turns two groups of config arrays from
filament-indexed into column-indexed: the per-variant filament options
(one column per variant a filament uses) and the merged extruder
retract overrides (resized to the column count by apply_override).
Export-path readers that still indexed them with the raw filament id
read a neighbor's column for every filament ordered after a migrating
one: toolchange/standby temperatures (M104/M109), retraction lengths
and feedrates, wipe distance, z-hop types, air-filtration keys, and -
through the Extruder's cached flow term - the extrusion E of every
move.
Now every such read resolves its column through the existing
layer-aware resolver (get_filament_config_index ->
Print::get_filament_config_indx), which returns the raw filament id
whenever no per-layer grouping result is published, so static prints
are byte-inert by construction. The Extruder itself has no layer
knowledge, so it gains an injected config column (set_config_index,
default = filament id) that the generator refreshes at the only two
resolution-changing events - layer change and writer toolchange - and
that re-syncs the cached e_per_mm3 flow term. Old-filament reads
resolve at the current layer, which is safe because the per-layer maps
are gap-filled carry-forward. Whole-array placeholder copies
(toolchange temperature overrides) are rebuilt in filament order,
mirroring the existing per-variant placeholder remap. The resolvers
move to the public section so non-friend helpers (ooze prevention) can
resolve too.
Documented, deliberately unchanged: the wipe tower's per-filament
parameter rows (no layer dimension; tower x per-layer grouping is a
follow-up), travel_slope's physical-extruder read, estimator pre-heat
bookkeeping temps, and index-0 header diagnostics.
Verification: new Extruder column-injection scenario (defaults, column
follow + flow-cache rescale, filament-indexed reads unaffected, reset
semantics) and a migrating write-back case proving the column shift for
filaments ordered after a migrator and the resolver tracking it (11 +
14 assertions); suites green (libslic3r 48998/169, fff_print 655/61);
20/20 pinned-slice byte gate bit-identical (incl. sequential repro x2
deterministic).
When the per-layer filament selector (enable_filament_dynamic_map)
migrates a filament across nozzle variants (e.g. Standard -> High Flow),
the config write-back only stored the derived extruder map; every
per-variant filament value (retraction, nozzle temperature, flow,
flush...) kept the numbers resolved from the pre-slice static mapping.
Now both dynamic write-back sites (the by-layer branch and the
sequential stitch) branch on the result's dynamic support. Migrating
results run a mixed-filament expansion that regathers every
filament_options_with_variant key from the pristine per-variant
superset, giving a migrating filament one config slot per (extruder
type x nozzle volume type) it lands on - filament_self_index,
filament_extruder_variant, and all value arrays grow in lockstep - and
recompute the retract overrides with per-slot machine indices so a nil
slot falls back to its own variant's machine value. Non-migrating
dynamic results take the merged three-map write-back so re-applies
reproduce from the written maps. Unrouted filaments resolve from the
result's own default map, so slot resolution never depends on
filament_map round-tripping through the plate config.
Print::apply reproduces the identical expansion from the persisted
group result (shared dedupe helper, expansion function, and slot
indices on both sides): the expanded keys sit in the psWipeTower /
psGCodeExport invalidate lists, so without the reproduction every
re-apply after a selector slice would diff non-empty and permanently
invalidate. cal_non_support_filaments now resolves the extruder per
layer from the published result for dynamic groupings.
filament_map_2 keeps its apply-time static derivation; nothing on the
dynamic path reads it (the per-slot machine indices key the override
merge), and per-(extruder x volume-type) machine limits in the g-code
processor remain a documented follow-up.
Every change is gated behind is_dynamic_group_reorder() or a persisted
result with dynamic support; no profile sets the flag, so the static
fleet's instruction stream is unchanged (20/20 pinned-slice byte gate
identical, incl. the sequential repro sliced twice, deterministic).
Tests: expansion unit coverage (migrating slots, unrouted fallback via
the default map, mis-sized volume map ignored, nullable retract keys in
lockstep, slot machine index layout), an end-to-end stub-driven
write-back asserting expanded slots, per-layer config-index resolution,
the override merge incl. the nil-slot variant fallback, and re-apply
stability, plus a real selector slice staying valid across re-apply.
Suites green (libslic3r 48987/168, fff_print 633/60).
Sequential (by-object) prints were incoherent with the per-layer filament
selector (enable_filament_dynamic_map): the by-object branch published a
static grouping while each per-object ToolOrdering independently ran the
dynamic planner from an empty nozzle status and wrote its own map to the
config (one write per object, last object wins). The exported toolchange
sequences then disagreed with the published result that drives the
per-layer maps, placeholders, and selector emission.
Now the by-object branch, when the selector is enabled, plans each unique
object once — threading the physical nozzle occupancy and the previous
object's last filament into the next plan — stitches the per-object
per-layer nozzle maps into one print-wide result (gap-filled by the new
normalize_nozzle_map_per_layer so any layer index resolves a filament's
nozzle consistently), publishes it, and writes the derived extruder map
back once. The plans are cached on the Print and g-code export consumes
the cache: the ToolOrdering seed changes the plan input (dontcare
assignment, first-layer reorder), so a fresh export-time construction
could re-plan differently from the published stitch. The per-object
dynamic write-back is gated off for sequential prints.
Every change is gated behind is_dynamic_group_reorder(); no profile sets
the flag, so the static fleet's instruction stream is unchanged (20/20
pinned-slice byte gate identical, incl. the by-object repro sliced twice).
Tests: normalize unit coverage (carry-forward, back-fill, ragged input),
stitched-blocks selector detection, and an end-to-end by-object selector
slice (apply -> process -> export) asserting the published stitched
result, one cached plan per object, the config write-back, and a clean
export. Suites green (libslic3r 48958/165, fff_print 633/60).
* ENH: config: add logic to apply params to object/region config with multi-extruder
JIRA: no-jira
Change-Id: Ieab98cd8d031e5ca82a3aad2d0b89d8ae4a794f1
(cherry picked from commit 3179fd416e68ca8bc2d746f859508d07db18fe5b)
* FIX: X1C switch to H2D lose Highflow parameter
Jira: STUDIO-15272
Change-Id: Id8cf5d93a49d5542ac82f9554974b458e15c1193
(cherry picked from commit 15d9f072ff658a3beb4f916d978dfea12c2d9f16)
* Fix mishandling of `stride` param and add unit test for it
* Fix modified multi-variant per-obj option highlight
* Fix issue that per-obj FloatsOrPercents options are marked as dirty incorrectly when lost focus
---------
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: weiting.ji <weiting.ji@bambulab.com>
Print::apply rebuilds m_config.filament_map_2 to the real per-filament slot
map on every apply, while the incoming full config only ever carries the
ConfigDef default. The resulting phantom one-key print_diff hit the
invalidator's catch-all branch and killed every print-level step on each
apply, so on multi-extruder printers a fresh slice result was invalidated
the moment the GUI re-applied after slicing completed.
Dropping the key from print_diff loses no information: it is never a user
input, and the rebuild derives it from filament_map, filament_volume_map
and the variant slots, each of which is diffed and invalidation-listed on
its own.
Regression test: re-applying an unchanged config after process() must not
invalidate psSlicingFinished (fails with APPLY_STATUS_INVALIDATED without
the fix). Suites green (libslic3r 48891/154, fff_print 631/59); 19-fixture
byte gate identical incl. the Hybrid repro project, determinism x2.
- the g-code writer tracks the current layer id and resolves
FILAMENT_CONFIG/NOZZLE_CONFIG (plus every non-macro variant lookup,
toolchange placeholder scalars, and the change-filament flush
overrides) through Print's per-filament, per-layer config-index
resolvers instead of the filament->extruder collapse
- update_layer_related_config refreshes the per-layer
extruder/volume/nozzle maps in the writer config;
update_placeholder_parser_with_variant_params remaps the
filament-variant arrays into filament-id space for custom g-code
(Orca's flush placeholder computation moves inside it)
- the engine's concrete per-filament volume assignment now merges into
the config write-back (the temporary hold from the producer commit
is lifted together with these consumers), and the background process
reads the computed volume map back to the plate
- append_full_config dumps the resolved filament_map_2 slots
- update_used_filament_values gains a bounds guard
- tests: per-filament Hybrid slot resolution + null-result fallback
Result: on a Hybrid extruder, each filament's features slice with its
assigned sub-nozzle's variant values (speeds, volumetric limits,
retraction). Verified on a 4-filament H2C Hybrid project: outer walls
split into three feedrate populations (30/50/200 mm/s), toolpath
geometry byte-identical, deterministic across repeated slices. All 18
non-Hybrid reference fixtures stay byte-identical except the
filament_map_2 header value now showing the real slot. Auto grouping
ties (multiple zero-flush perfect matchings) may pick a different
filament-to-nozzle isolation than other slicers; verified co-optimal.
- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
- Print::get_nozzle_config_index / get_filament_config_indx resolve a
filament's variant slot per layer from the nozzle group result, with
hashed index caches; when no group result is published (sequential
prints), they fall back to the static filament->extruder mapping so
behavior is unchanged
- filament_map_2 caches each filament's resolved print-variant slot;
rebuilt in Print::apply after the filament_map diff handling and in
the filament-map write-back
- filament retract overrides now key by slot indices: apply_override
fallback indexing flips to 0-based, Print::apply passes
filament_map/extruder indices, the write-back passes filament_map_2
(identical resolution while slots equal extruders)
- filament_volume_map/filament_nozzle_map/filament_map_2/
filament_self_index become PrintConfig static members (required for
member access); grouping input guards tightened so their registered
1-element defaults are never mistaken for real per-filament maps
(single-filament manual mode keeps the mix-marker fallback)
- update_filament_self_index_cache refreshed at every full-config
assignment
- tests: 0-based apply_override fallback, get_config_index_base
hit/miss/mixed-type cases
The resolvers are not consumed by the g-code writer yet. Non-Hybrid
g-code is unchanged except the config header, which now serializes the
three new static keys (defaults until the per-filament producer lands);
verified by the 19-fixture byte gate: 3 added header lines per fixture,
zero motion changes.
- get_extruder_nozzle_volume_count derives per-extruder volume-type slot
lists from extruder_nozzle_stats (absent stats = one slot per extruder)
- update_values_to_printer_extruders learns the slot layout: when any
extruder mixes volume types, option arrays keep one slot per
(extruder x volume type), extruder-ascending then volume-ascending;
single-slot resolution takes the filament's volume type on mixed
extruders
- update_values_to_printer_extruders_for_multiple_filaments applies a
per-filament nozzle_volume_type override from filament_volume_map
(when sized to the filament count) and remaps filament_self_index
through the same pipeline as every other filament key
- get_config_index_base + is_auto_filament_map_mode helpers (consumers
land with the per-filament config-index resolvers)
- callers updated: PresetBundle composition paths, PrintApply (counts
hoisted above the extruder_applied guard), Print write-back
- new tests: slot counting, Hybrid slot expansion incl. stride 2,
per-filament override, non-Hybrid degeneracy
Non-Hybrid printers keep their variant layout and values (proven by a
19-fixture byte gate; the only header delta is filament_self_index now
flowing through the same variant pipeline as its sibling filament
keys). Hybrid slices grow the config-block variant arrays to one entry
per sub-nozzle volume type; motion g-code is unchanged until the
g-code writer consumes the new slots.
G-code post-processing is now a step of the slicing-pipeline plugin rather than a
separate capability type. One capability class can transform slices at the geometry
seams AND edit the final G-code, behind a single picker/option.
- Add SlicingPipelineStepPlugin::psGCodePostProcess (bound as
orca.slicing.Step.psGCodePostProcess). Unlike the geometry steps it fires from the
GUI export path in PostProcessor.cpp, not from Print::process(): ctx.print/ctx.object
are None and the plugin edits the file at ctx.gcode_path in place. It may run more
than once per slice (file export and/or upload) and its output is not shown in the
preview.
- Extend SlicingPipelineContext with gcode_path/host/output_name and a C++-only
full_config; config_value() falls back to it when there is no live Print.
- PostProcessor.cpp dispatches SlicingPipelinePluginCapability at psGCodePostProcess,
driven by the existing slicing_pipeline_plugin option.
- The exported G-code lives outside data_dir(), so the plugin audit sandbox would
block the write; the trampoline's audit setup grants ctx.gcode_path's folder as a
scoped allowed root, gated on a non-empty gcode_path so the geometry-step hooks gain
no extra filesystem access.
BREAKING CHANGE: the separate G-code post-processing capability type is removed.
- orca.gcode.GCodePluginCapabilityBase and orca.PluginType.PostProcessing are gone;
post-processing plugins migrate to orca.slicing.SlicingPipelineCapabilityBase +
Step.psGCodePostProcess (and gain ctx.params / ctx.config_value()).
- The post_process_plugin config option is removed; use slicing_pipeline_plugin.
Presets carrying the old key degrade to the standard unknown-key warning.
- Manifest type = "post-processing" now maps to Unknown (advisory only; the loader
dispatches on the C++ get_type()).
Also repairs two latent build breaks the branch carried: stale Step enum value usages
in test_slicing_pipeline_hook.cpp and a reference to the removed
ConfigOptionDef::PluginType::None in Tab::on_value_change (now is_plugin_backed()).
Adds the orca_gcode_stamp sample plugin and a psGCodePostProcess binding test.
Filament grouping already consumed per-filament forbidden nozzle volume
types, but every call site passed an empty map, so a variant-restricted
filament (e.g. one limited to "Direct Drive TPU High Flow") could be
auto-grouped onto an incompatible nozzle flow type on multi-variant
printers.
- add convert_to_nvt_type() to parse extruder variant strings
- add Print::get_filament_unprintable_flow(): forbidden volume types =
printer extruder variants minus the filament's declared variants;
filaments declaring no variants stay unrestricted
- feed the map into grouping at the by-object path (Print.cpp) and all
six mapping/planning sites in reorder_extruders_for_minimum_flush_volume
- unit-test the string parser
Non-restricted configurations produce an empty map, so existing
printers' grouping and g-code are unchanged.
round() already had unit coverage; floor() and ceil() had none. Add the missing
positive cases for both signs, plus round()'s half-away-from-zero tie-break, and
one negative case asserting that a name outside the grammar's built-in function
set is treated as an undefined variable and throws, rather than being passed
through to a math library.
* fix: prevent out-of-bounds crash in Arachne beading interpolation
SkeletalTrapezoidation::interpolate() derives an inset index from `left` but
uses it to index the merged beading, which follows the thicker of left/right.
When the thicker side has fewer insets, the index runs past the end and the
slicer crashes during "Generating walls".
Skip the adjustment when the index is out of range, as the adjacent guards
already do. interpolate() uses no instance state, so make it static and add a
regression test that exercises it directly.
Fixes#14584
feat: add regex_replace() string transform to filename templates
The filename template language could test strings (=~, !~, one_of) but
never rewrite one, so there was no supported way to reshape a placeholder
value, such as dropping a file extension from {first_object_name}.
Add regex_replace(subject, /pattern/, replacement), reusing the existing
regex-literal syntax and boost::regex engine. Every placeholder keeps
returning its exact value and the template does the transform explicitly:
{regex_replace(first_object_name, /\.[^.]*$/, "")} strip any extension
The replacement may reference capture groups ($1, $2, ...). It is one
grammar function mirroring digits(), with the name registered as a keyword
so it is not parsed as a variable.
Adds PluginHostSlicing, which registers the print-graph data model (Print,
PrintObject, Layer, LayerRegion, Surface, ExPolygon, extrusions, ...) into the
orca.host submodule in the same raw-class style as PluginHostApi's Model/Preset
graph, with shared helpers in PluginBindingUtils. SlicingPipelinePluginCapability
is trimmed to the capability surface (the standalone SlicingNumpy helper is folded
away). Adds the Twistify example plugin next to Inset and broadens the binding,
hook, and plugin-install tests.
On Linux every account shares /tmp, but slicing builds temp paths there under
fixed, app-owned names via temporary_dir() (model backups, STEP import,
part-skip). The first user to slice creates and owns those dirs, so the next
user cannot write under them and slicing crashes with "No such file or
directory".
Tag the app temp root with the user id at startup (<temp>/orcaslicer_<uid>)
so every temporary_dir() consumer is isolated at once. The id stays at the
top level of the world-writable system temp so each user's dir is created
directly there; a shared parent dir would be owned by whichever user made it
first. The root is pre-created because STEP import writes into it directly.
Windows keeps the plain temp dir since it is already per-user.
Fixes#10108. Same root cause as #5969.
* Support accessing `coFloatsOrPercents` values in gcode template (OrcaSlicer/OrcaSlicer#14522)
* Vector option values are separated by comma
* Fix wrong cast used for checking nullability
CalibPressureAdvancePattern::line_width_first_layer() returned the raw
initial_layer_line_width, so a value of 0 (which means "use the default")
fed 0 into the Flow spacing math and threw FlowErrorNegativeSpacing,
crashing the whole app when slicing a PA pattern calibration.
Mirror the guard already present in the sibling line_width(): when the
configured width is non-positive, fall back to auto_extrusion_width.
Add a libslic3r regression test covering the width resolution.
Fixes#13188
* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
* fix(libnest2d): skip the excluded-region alignment pass when there are none
NfpPlacer::finalAlign(), run from clearItems() and the destructor, always
ran the "find a best position inside the NFP of fixed items" pass even when
no items are fixed. With nothing to avoid, calcnfp() computes the inner-fit
NFP of the pile and can feed clipper a coordinate outside its allowed range.
On Linux/clang the value stays in range so it went unnoticed; on MSVC the
clipper "Coordinate outside allowed range" exception escapes the noexcept
destructor and aborts the process (exit 0xC0000409).
Build the excluded set up front and only run the pass when it is non-empty.
The block exists solely to keep the pile clear of fixed items (excluded
regions / wipe tower), so it is a no-op when there are none and the
wipe-tower behaviour is unchanged.
* test(libnest2d): remove dead nesting tests and split the suite by feature
Seven of the suite's hidden [.] test cases drove code paths Orca abandoned
at the BambuStudio fork: BottomLeftPlacer (used nowhere in src/) and the
stock default NfpPlacer backend, which returns zero bins in Orca. They have
been red since the fork and are never registered with ctest. Remove them.
Split the 1,000-line libnest2d_tests_main.cpp into per-feature files, per the
repo convention, sharing a header for the no-fit-polygon backend setup that
every translation unit must agree on (ODR):
libnest2d_tests.cpp Item and nest() basics
test_geometry.cpp geometry primitives
test_nfp.cpp no-fit-polygon machinery
libnest2d_test_utils.hpp shared includes and the NFP backend specialisation
Along the way: drop a debug exportSVG() helper that only wrote a file on test
failure (so the suite never leaves stray assets), convert the deprecated
Catch::Approx to WithinRel/WithinAbs matchers, and give the tests descriptive
names.
* test(libnest2d): add NfpPlacer unit tests
NfpPlacer is the placement engine the arranger drives, but the suite only
covered the geometry primitives. Add a fixture and five tests that exercise
pack()/accept() directly: a single item lands in the bin, an oversized item
is rejected, the first item is seeded for every starting point, many items
pack without overlap, and the rotation candidates are searched. This lifts
nfpplacer.hpp line coverage from 42% to 87% in the libnest2d suite.
* test(libslic3r): add arrangement::arrange() integration coverage
The libnest2d suite cannot reach Orca's real nesting entry point because it
does not link libslic3r. Add test_arrange.cpp driving arrangement::arrange():
items land on the bed and within bounds, do not overlap, are spaced by their
inflation, an oversized item stays unplaced, overflow spills onto virtual beds,
an empty input is a no-op, and the DONT_ALIGN and USER_DEFINED final-alignment
paths are exercised. A self-test guards the overlap check the other cases use.
Fix Unit Tests CI job silently running zero tests
scripts/run_unit_tests.sh selected tests with `ctest -L "Http|PlaceholderParser"`,
but catch_discover_tests() was called without ADD_TAGS_AS_LABELS, so Catch2 tags
were never registered as CTest labels. The -L filter matched nothing and the job
passed green while running no tests ("No tests were found!!!"). Tests have not run
in CI since PR #11485 added that -L line (2025-12-23).
Register tags as labels via a shared orcaslicer_discover_tests() wrapper in
tests/CMakeLists.txt (passing ADD_TAGS_AS_LABELS), routed through all five test
suites. Restore full-suite execution by replacing the narrow -L selection with a
`-LE NotWorking` exclusion, so all reliable tests gate PRs again (the suite ran in
full before #11485).
Tag the two OrcaCloudServiceAgent display-name tests [NotWorking]: their
constructor reaches wxStandardPaths::Get().GetUserDataDir(), which dereferences
the null wxTheApp in the headless test binary and segfaults on every platform.
Excluded until the agent can be constructed without the wx app context.
CI now runs 151 tests (was 0) and passes.
* Add test for Arachne duplicate wall segment detection
Add test cases that reproduce an issue where Arachne generates
duplicate/coinciding extrusion segments at certain min_bead_width settings.
Test configuration:
- Profile: 0.28mm Extra Draft @BBL X1C (0.4mm nozzle, 0.28mm layer)
- outer_wall_line_width: 0.42mm, inner_wall_line_width: 0.45mm
- wall_loops: 2, precise_outer_wall: enabled
- Test polygon: outer rectangle (0,0)-(20,20) with inner cutout (0.5,0.5)-(19.5,19.5)
This creates a 0.5mm wide frame around the perimeter.
Results:
- 50% min_bead_width (0.20mm): FAILS - detects 4 duplicate segments (all 4 sides)
- 60% min_bead_width (0.24mm): PASSES - no duplicates
At 50%, Arachne generates two separate closed loops that share all 4 edges
of the inner square. At 60%, Arachne generates a single closed loop.
SVG output is exported to /tmp/opencode/ for visual debugging.
* Fix Arachne duplicate extrusion caused by bead count mismatch
WideningBeadingStrategy::compute() used optimal_width (inner wall width)
to determine if a thin wall should produce a single bead. However,
getOptimalBeadCount() uses optimal_width_outer (outer wall width) via
RedistributeBeadingStrategy to decide the bead count.
This inconsistency caused situations where getOptimalBeadCount() returned
2 beads, but compute() produced only 1 bead at full thickness. The single
bead was then generated for both inner and outer contours, resulting in
duplicate extrusion paths.
Fix: Use getTransitionThickness(1) instead of optimal_width. This method
returns the exact threshold for the 1-to-2 bead transition, ensuring
consistency between bead count calculation and bead generation.
Reproduces with: 50% min_bead_width, 0.42mm outer wall, 0.45mm inner wall,
0.5mm polygon inset creating ~0.38mm wall thickness.
Fixes#13917
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Update eigen from v3.3.7 to v5.0.1.
This updates eigen from v3.3.7 released on December 11, 2018-12-11 to v5.0.1
released on 2025-11-11. There have be a large number of bug-fixes,
optimizations, and improvements between these releases. See the details at;
https://gitlab.com/libeigen/eigen/-/releases
It retains the previous custom minimal `CMakeLists.txt`, and adds a
README-OrcaSlicer.md that explains what version and parts of the upstream
eigen release have been included, and where the full release can be found.
* Update libigl from v2.0.0 (or older) to v2.6.0.
This updates libigl from what was probably v2.0.0 released on 2018-10-16 to
v2.6.0 released on 2025-05-15. It's possible the old version was even older
than that but there is no version indicators in the code and I ran out of
patience identifying missing changes and only went back as far as v2.0.0.
There have been a large number of bug-fixes, optimizations, and improvements
between these versions. See the following for details;
https://github.com/libigl/libigl/releases
I retained the minimal custom `CMakeLists.txt`, added `README.md` from the
libigl distribution which identifies the version, and added a
README-OrcaSlicer.md that details the version and parts that have been
included.
* Update libslic3r for libigl v2.6.0 changes.
This updates libslic3r for all changes moving to eigen v5.0.1 and libigl
v2.6.0. Despite the large number of updates to both dependencies, no changes
were required for the eigen update, and only one change was required for the
libigl update.
For libigl, `igl::Hit` was changed to a template taking the Scalar type to
use. Previously it was hard-coded to `float`, so to minimize possible impact
I've updated all places it is used from `igl::Hit` to `igl::Hit<float>`.
* Add compiler option `-DNOMINMAX` for libigl with MSVC.
MSVC by default defines `min(()` and `max()` macros that break
`std::numeric_limits<>::max()`. The upstream cmake that we don't include
adds `-DNOMINMAX` for the libigl module when compiling with MSVC, so we need
to add the same thing here.
* Fix src/libslic3r/TriangleMeshDeal.cpp for the unmodified upstream libigl.
This fixes `TriangleMeshDeal.cpp` to work with the unmodified upstream
libigl v2.6.0. loop.{h,cpp} implementation.
This file and feature was added in PR "BBS Port: Mesh Subdivision" (#12150)
which included changes to `loop.{h,cpp}` in the old version of libigl. This PR
avoids modifying the included dependencies, and uses the updated upstream
versions of those files without any modifications, which requires fixing
TriangleMeshDeal.cpp to work with them.
In particular, the modifications made to `loop.{h,cpp}` included changing the
return type from void to bool, adding additional validation checking of the
input meshes, and returning false if they failed validation. These added
checks looked unnecessary and would only have caught problems if the input
mesh was very corrupt.
To make `TriangleMeshDeal.cpp` work without this built-in checking
functionality, I removed checking/handling of any `false` return value.
There was also a hell of a lot of redundant copying and casting back and forth
between float and double, so I cleaned that up. The input and output meshs use
floats for the vertexes, and there would be no accuracy benefits from casting
to and from doubles for the simple weighted average operations done by
igl::loop(). So this just uses `Eigen:Map` to use the original input mesh
vertex data directly without requiring any copy or casting.
* Move eigen from included `deps_src` to externaly fetched `deps`.
This copys what PrusaSlicer did and moved it from an included dependency under
`deps_src` to an externaly fetched dependency under `deps`. This requires
updating some `CMakeList.txt` configs and removing the old and obsolete
`cmake/modules/FindEigen3.cmake`. The details of when this was done in
PrusaSlicer and the followup fixes are at;
* 21116995d7
* https://github.com/prusa3d/PrusaSlicer/issues/13608
* https://github.com/prusa3d/PrusaSlicer/pull/13609
* e3c277b9ee
For some reason I don't fully understand this also required fixing
`src/slic3r/GUI/GUI_App.cpp` by adding `#include <boost/nowide/cstdio.hpp>` to
fix an `error: ‘remove’ is not a member of ‘boost::nowide'`. The main thing I
don't understand is how it worked before. Note that this include is in the
PrusaSlicer version of this file, but it also significantly deviates from what
is currently in OrcaSlicer in many other ways.
* Whups... I missed adding the deps/Eigen/Eigen.cmake file...
* Tidy some whitespace indenting in CMakeLists.txt.
* Ugh... tabs indenting needing fixes.
* Change the include order of deps/Eigen.
It turns out that although Boost includes some references to Eigen, Eigen also
includes some references to Boost for supporting some of it's additional
numeric types.
I don't think it matters much since we are not using these features, but I
think technically its more correct to say Eigen depends on Boost than the
other way around, so I've re-ordered them.
* Add source for Eigen 5.0.1 download to flatpak yml config.
* Add explicit `DEPENDS dep_Boost to deps/Eigen.
I missed this before. This ensures we don't rely on include orders to make
sure Boost is installed before we configure Eigen.
* Add `DEPENDS dep_Boost dep_GMP dep_MPFR` to deps/Eigen.
It turns out Eigen can also use GMP and MPFR for multi-precision and
multi-precision-rounded numeric types if they are available.
Again, I don't think we are using these so it doesn't really matter, but it is
technically correct and ensures they are there if we ever do need them.
* Fix deps DEPENDENCY ordering for GMP, MPFR, Eigen, and CGAL.
I think this is finally correct. Apparently CGAL also optionally depends on
Eigen, so the correct dependency order from lowest to highest is GMP, MPFR, Eigen, and CGAL.
---------
Co-authored-by: Donovan Baarda <dbaarda@google.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
