Every remaining legacy filament_id outside the BBL/QD_* islands re-derives
from its product triple (filament_vendor / filament_type / family name),
completing the content-addressed id model of filament_id_plan_v3.md:
- Relocation pre-step: 14 fdm_filament_* template forks (Cubicon x3,
Prusa x6, RH3D x6 minus the pc fork already re-homed) stop declaring
ids; the 16 presets that rode Prusa's forks now declare the id they
already resolved (verified zero effective-id drift over all 5892
instantiated presets).
- --drop-redundant-ids: 6 Custom/MyToolChanger generics drop copied GF
ids and ride their OFL families.
- --remint over all 62 non-island vendors: 2647 declarations re-derived;
identical products converge cross-bundle (showcase: PolyLite PLA is now
OF5CgdDq in OrcaFilamentLibrary, Qidi, OrcaArena and Snapmaker).
- Prusament @XL completions surfaced by the relocation: filament_vendor
["Prusa Polymers"] on the 8 @XL declarers; Prusament PA-CF typed
PA11-CF (the product is Prusament PA11CF) and PC-CF typed PC-CF
(-CF family typed as base polymer); each family converges on one id.
- Succession: 331 ids retired with mode-rule successors, 355 never-shipped
v1 mints forgotten with chain splicing, 151 GF-shaped ids released to
the island space with hints, 27 curated BBL-generic -> OFL-generic
hints (GFL99 -> OFDSrzZ8 class). New --retire "OLD=NEW" maintenance
mode records lineage for OGFC99/OGFG99/OGFN99 (the shipped ids of OFL's
Generic PC/PETG/PA in released versions, whose claims migrated in v3.1
while Cubicon's inert fork declarations kept them alive).
- Retiring the P-hex system ids removes the last system ids from
check_ams_filament_valid's destructive P-gate.
- AMS-ambiguity fixes surfaced by convergence (validator -f): 4 presets
riding another family's id through inherits now declare their true
family id (Elegoo Generic ASA-CF/PETG-CF, Snapmaker PolyLite Dual PLA /
PolyLite J1 PLA); 9 Cubicon @base presets and Dremel Generic PLA, which
duplicate their per-printer variants on the same printers, split onto
the salt-1 iteration of their triple (sanctioned by the mint-conformance
check; --remint now leaves salt-conformant declarations alone).
Gates: assign_filament_ids --check 0; orca_extra_profile_check 0;
116 python unit tests; config-equivalence over all 5892 instantiated
presets (byte-identical configs except the 14 sanctioned Prusament
vendor/type corrections; setting_id and compatible_printers unchanged;
per-family convergence and ledger conservation verified); profile
validator base/-f/-r(BBL)/-r(Qidi) all green; libslic3r_tests 48610
assertions; Moonraker OFL generic map check; custom-preset fixture
archives v1.9.0-v2.4.1.
Implements phase v3.0 of filament_id_plan_v3.md - tooling and client
prerequisites. No filament_id values change in this commit.
Tooling (scripts/assign_filament_ids.py; 106 unit tests):
- The mint key becomes "filament_product/<filament_vendor>/<filament_type>/
<family_name>", resolved loader-faithfully from the declarer's flattened
config - bundle-independent and content-addressed; identity fixes re-id
by design and are made safe by the succession ledger. --mint now takes
the triple.
- The snapshot gains "triples" and "triple_exceptions" sections, folded
into the equality gate: any vendor/type/name change surfaces as a
reviewable snapshot diff. Check 3 rewritten to triple-mint conformance
with (id, triple) grandfathering; check 5 generalized from OFL generics
to every OFL-riding vendor preset; new check 8 (triple integrity) and
check 9 (succession integrity).
- The retired ledger moves to resources/profiles/retired_filament_ids.json
so it ships with the app; schema {claims, successor} plus cross-island
"hints". The 14 v1 entries are migrated with mode-rule successors.
Vanished ids in a foreign island's space (GF*/QD_*) are RELEASED with a
hint instead of retired: the island catalog owns them and may
legitimately (re)ship them, which check 4 must never block.
- New maintenance modes: --remint VENDOR, --drop-redundant-ids VENDOR,
--add-hint "OLD=NEW", and --update-snapshot --forget-never-shipped FILE
(never-shipped ids drop from lineage; chains splice through them).
Runtime (C++):
- Succession helpers in libslic3r/Preset (pure chain-follow + lazy ledger
load from resources), consulted only on resolution miss in
get_filament_by_filament_id, both AMS sync predicates,
add_ams_filaments, setting_id_to_type, and the calibration-history
lookup; behavior is byte-identical while the ledger has no matching
entry. Catch2 coverage in tests/libslic3r.
- W1 hardening: check_ams_filament_valid no longer remote-wipes trays or
rewrites temps for P-shaped ids that a system preset carries (ten such
system ids ship today); the size==8 && [0]=='P' assert is relaxed; the
unguarded filament_list find deref in the temp-equation check returns
non-destructively on a miss.
- MoonrakerPrinterAgent: the 23 hardcoded OFL generic ids are replaced by
a runtime lookup of "Generic <family> @System" (id-equivalent on
today's shipped profiles, follows future re-mints automatically);
scripts/test_moonraker_lane_data.py derives its expectations from the
shipped profiles and gains --check-ofl-map.
Profile data (W3 - type is now a key component, so type bugs are fixed
before any re-mint):
- 17 same-name-different-type groups corrected across 50 files (OFL
Generic PETG-CF/PE-CF/PP-CF; Flashforge ASA Basic/ASA-CF/ABS-CF/HIPS/
PAHT-CF/PLA Silk; FusRock PAHT; Creality Generic PA6-CF; InfiMech PETG;
Anycubic TPU 95A / TPU for ACE; Prusa Generic PA-CF/PLA-CF) - every
value validated against MaterialType::all(); 3 Snapmaker U1 roots gain
their missing filament_vendor. Flattened-config equivalence vs the
previous commit: exactly the 54 intended diffs, zero BBL.
- doc/developer-reference/filament_id.md rewritten for the v3 rule.
Ambiguous type divergences (Prusa Generic TPU/TPU HF FLEX-vs-TPU, FusRock
S-Multi/S-PAHT) and all same-type vendor-tag divergences are deferred to
the v3.2 vendor worksheets, catalogued with analysis.
Phase 2 long-tail migrations (56 collision groups across six vendors), zero
effective-config change except where stated:
Cubicon (17): 'Cubicon PC @base' verbatim-copied PA-CF's P510cfd0 at
introduction (90a6c53ad5; PC was the config-light stub) - the PC family gets
a fresh mint via its root. The other groups were all one shape: nine @base
presets instantiated on exactly the two printers their dedicated variants
cover with byte-identical passthrough configs, so no compatible_printers
trim exists that CI would accept (instantiated presets must claim a
printer). Fix: flip the nine @bases to instantiation:false and drop their
setting_ids (bases carry none by convention). Every printer keeps an
identical-config selectable preset per family - verified programmatically
before flipping; no machine default_materials references an @base name.
Dremel (3): 'Dremel Generic PLA' is deliberately selectable alongside its
per-printer variants (#6837 re-exposed it), and the variants carry real
overrides - a genuine AMS ambiguity with no config-neutral trim. The three
variants share the fresh family mint OFUYjPc4 as own keys; the root keeps
GFL99. A deliberate same-family id split (P8 shape): Dremel has no device
ecosystem consuming filament_id, and every alternative is a user-visible
regression of #6837. default_materials resolve unchanged.
Anycubic (14): copy-paste/generic-riding across three id eras; 2022-era
Anycubic Generic ABS/PETG/PLA/TPU keep the catalog ids, 13 families
re-minted atomically (72 edits incl. 48 forced same-family re-ids), retiring
the invented GFABS/GFL92/GFL93/GFPLA* space-containing ids.
Artillery (8): GFL99 umbrella + P-hex copy-pastes; Artillery Generic PLA
keeps GFL99, Artillery PLA keeps Pfcf9c4c, 17 families minted (52 edits),
P284941e retired.
InfiMech (14): pure verbatim Bambu-generic copy-paste; the six InfiMech
Generic owners keep their ids, 15 impostor families minted (34 edits).
Creality (8): HF generics copy-pasted GFL99 + id-less sub-brand lines riding
keeper families; owners keep their git-verified ids, 8 families minted (17
edits, own-key layout for members inheriting heterogeneous per-series
parents).
Verified per batch: config-equivalence gate zero unexpected diffs (the nine
Cubicon @base instantiation flips are the only preset-set changes, reviewed
above); orca_extra_profile_check.py exit 0; assign_filament_ids.py --check
exit 0; validator -l 2 exit 0; extended -f exit 0 for all six vendors
(-v Cubicon/Dremel/Anycubic/Artillery/InfiMech/Creality); 14 fully-vanished
ids appended to the retirement ledger.
* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
* Support 'Default' filament option (index 0)
Treat filament index 0 as the new "Default" (use active object/part filament) instead of using 1. Update config defaults and tooltips for wall/sparse/solid infill filament options (min/default -> 0, tooltip explains "Default"). Adjust normalization and propagation logic to respect explicit feature overrides and only apply base extruder when feature values are zero; only copy sparse->solid infill when sparse > 0. Introduce FeatureFilamentOverrideMask and clamp_feature_filament_to_valid to resolve and clamp feature filaments. Update UI lists and selection behavior to expose a "Default" entry and handle zero-based indices in PartPlate and Plater.
* enable_filament_for_features option
Co-Authored-By: LixNix <105106115+lixnix@users.noreply.github.com>
* \n
* Allow wipe_tower_filament to equal nozzle count
Relax the assertion in Print::extruders to permit wipe_tower_filament == config().nozzle_diameter.size(). The configuration value is 1-based and the code subtracts 1 when pushing the extruder index, so equality should be valid and selecting the last nozzle should not trigger an assertion.
* Revert "Allow wipe_tower_filament to equal nozzle count"
This reverts commit 2c976574327a8bcdc74a1b296bf1aaff7752a94e.
* Revert "enable_filament_for_features option"
This reverts commit 01c13baeddb8e26793f752deab788ee4d086975b.
* Migrate legacy feature filament defaults
Add migration logic to convert legacy feature filament selections from 1 to 0 for older 3mf files. Introduces a local migrate_legacy_feature_filament_defaults lambda in src/OrcaSlicer.cpp and src/slic3r/GUI/Plater.cpp that scans keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) on configs/objects/volumes, updates values, counts conversions and logs the result. Also adds a Semver check for "2.4.0-dev" in OrcaSlicer to trigger the migration for files older than that version. This preserves expected default filament selections when loading older project files.
* Update OrcaSlicer.cpp
* Extract migration helper to ConfigMigrations
Centralize legacy feature-filament default migration by moving the duplicated lambda into ConfigMigrations::migrate_legacy_feature_filament_defaults (src/libslic3r/Config.cpp) and declaring it in Config.hpp. Update OrcaSlicer.cpp and slic3r/GUI/Plater.cpp to call the new function instead of inline lambdas. The helper converts specific feature filament keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) from int 1 to 0 and returns the count of conversions to avoid duplicated migration logic.
* Remove DynamicFilamentList1Based and consolidate lists
Delete the specialized DynamicFilamentList1Based struct and its global instance. Update Choice registrations to use the single dynamic_filament_list for wall, sparse_infill and solid_infill filaments, and remove the extra update call for the removed instance. This consolidates filament choice handling and removes duplicated logic in Plater.cpp.
* move it
* fix objects
* Update Config.hpp
* Update profiles
* [Fix] Anycubic machine print profiles fix-patch
default_material changed. Wrong referenced Material deleted. No filament profile available.
* Anycubic Kobra X profile
These are the files for a new printer profile in OrcaSlicer for Anycubic Kobra X
Tested on Ubuntu 26.04 LTS.
Local Build = passed
OrcaSlicer Profile Validator = passed
Python Profile Validation Script = passed
* Rename resources/profiles/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json
correcct folder
* Rename resources/profiles/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename 0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json to process0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic/process0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic Kobra X.json to resources/profiles/Anycubic/machine/Anycubic Kobra X.json
* Rename resources/profiles/Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic Kobra X_buildplate_model-test.stl to resources/profiles/Anycubic/Anycubic Kobra X_buildplate_model-test.stl
* Rename resources/profiles/Anycubic Kobra X_buildplate_texture-test.svg to resources/profiles/Anycubic/Anycubic Kobra X_buildplate_texture-test.svg
* Rename resources/profiles/Anycubic Kobra X_cover.png to resources/profiles/Anycubic/Anycubic Kobra X_cover.png
* Rename resources/profiles/Anycubic ABS @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PETG @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic ASA @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PVA @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PVA @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA High Speed @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic TPU 95A @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic TPU 95A @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic PLA+ @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Anycubic TPU for ACE @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Anycubic TPU for ACE @Anycubic Kobra X 0.4 nozzle.json
* Rename resources/profiles/Generic PETG @Anycubic Kobra X 0.4 nozzle.json to resources/profiles/Anycubic/filament/Generic PETG @Anycubic Kobra X 0.4 nozzle.json
* Delete resources/profiles/Anycubic/Anycubic Kobra X_buildplate_texture-test.svg
wrong file
* Delete resources/profiles/Anycubic/Anycubic Kobra X_buildplate_model-test.stl
wrong file
* corrected Files
correct files uploaded (buildplate).
missing file was included (hotned)
* Delete resources/profiles/Anet directory
No profiles found for vendor: Anet at OrcaSlicer/resources/profiles/Anet.json
* Delete resources/profiles/Anycubic.json
Replaced
* Replaced
Replaced after running: python3 ./orca_filament_lib.py --fix --force
* Space indentation correction via script
Space indentation correction via script
* Space indentation correct via script
Indentation Check Failed
python3 ./scripts/orca_filament_lib.py --fix --force
* Space indentation corrected via script
Indentation Check Failed
python3 ./scripts/orca_filament_lib.py --fix --force
* Tab correction
* Tab correction
* Tab correction
* Tab correction
* fix format
* Anet restore
* Create Anet A8 Plus 0.4 nozzle.json
* restored Anet
* Delete resources/profiles/Anet/machine directory
the Anet profile is corrupted
* Create Anet A8 Plus.json
* machine
* Rename resources/profiles/Anet/Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/machine/Anet A8 Plus 0.4 nozzle.json
corect folder
* Filament
* Rename resources/profiles/Anet/Anycubic Generic ABS @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic ABS @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic ASA @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic ASA @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PA @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PA @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PA-CF @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PA-CF @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PC @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PC @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PETG @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PETG @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PLA @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PLA @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PLA-CF @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PLA-CF @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic PVA @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic PVA @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/Anycubic Generic TPU @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/filament/Anycubic Generic TPU @Anet A8 Plus 0.4 nozzle.json
* process
* Rename resources/profiles/Anet/0.15mm Optimal @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/process/0.15mm Optimal @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/0.20mm Standard @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/process/0.20mm Standard @Anet A8 Plus 0.4 nozzle.json
* Rename resources/profiles/Anet/0.30mm Draft @Anet A8 Plus 0.4 nozzle.json to resources/profiles/Anet/process/0.30mm Draft @Anet A8 Plus 0.4 nozzle.json
* Delete resources/profiles/Anet/machine directory
* Delete resources/profiles/Anet/filament directory
* Delete resources/profiles/Anet/process directory
* restore
* Rename resources/profiles/Anet/Anet A8 Plus.json to resources/profiles/Anet/machine/Anet A8 Plus.json
* restore
* restore
* Delete resources/profiles/Anet/machine/Anet A8 Plus.json
* Changed to original OrcaSlicer profile
My modified printer profiles were overwritten by the original OrcaSlicer profiles. This reversed the changes made under “default_materials.” As a result, 47 errors appear when running the “Python Profile Validation Script”!
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
## Summary
Adds proper system profiles for the **Anycubic Kobra Neo** with 0.4mm nozzle (stock Marlin firmware).
This replaces the profiles from #12341 which had several issues:
- All files had `"from": "User"` instead of `"from": "system"` — causing profile loading failures
- No `inherits` or `type` fields — broke the inheritance chain
- Klipper-only gcode (not stock firmware)
- No `Anycubic.json` index entries — printer never appeared in the UI
- Cover image was 382x600 instead of 240x240 (displayed squashed)
- Profiles were subsequently removed in #12889
### Files added/modified
| File | Description |
|------|-------------|
| `machine/Anycubic Kobra Neo.json` | Base machine model (220x220x250mm) |
| `machine/Anycubic Kobra Neo 0.4 nozzle.json` | 0.4mm nozzle variant, stock Marlin gcode |
| `process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json` | Detail process profile |
| `process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json` | Standard process profile |
| `process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json` | Standard process profile |
| `process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json` | Standard process profile |
| `filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json` | PLA filament profile |
| `Anycubic Kobra Neo_cover.png` | Resized to 240x240 |
| `Anycubic.json` | Added index entries for all new profiles |
### Approach
- Based on the working **Anycubic Kobra 2 Neo** profiles (similar hardware — direct drive, 220x220 bed)
- Start gcode uses `G29` for auto bed leveling (stock Kobra Neo probes fresh each print)
- Profiles use proper `"from": "system"` and `"inherits": "fdm_machine_common"` / `"fdm_process_common"` chains
- Buildplate model and texture from #12341 are already in the repo
### Testing
- Verified profiles load correctly in OrcaSlicer 2.3.2 (no errors in log)
- Printer appears in Printer Selection dialog with correct 240x240 cover image
- Process/filament presets appear when printer is selected
- **Note:** Start/end gcode adapted from Kobra 2 Neo for stock Marlin — testing on stock firmware by Kobra Neo owners would be appreciated
Closes the gap left by #12341 and #12889.
* Change ironing angle setting to be an offset angle from the top surface angle rather offset from the layer 0 angle that changes on each layer.
* Change Ironing angle offset range from [-1,359] to [0,359].
-1 is redundant because it is the same behavior as 0 offset.
* Change ironing_angle new default value to 0.
* Update existing print profiles' hardcoded ironing_angles from -1 to 0 to reflect new default value.
* Add migration for old -1 ironing_angle settings. Remove logic for -1 ironing_angle.
* Add u8 prefix for degree symbol string
* Use solid_infill_direction instead of infill_direction for top surface infill direction. Use calculate_infill_rotation_angle to add offset to solid_infill_rotate_template if used.
* Update quality settings wiki for Ironing
* Set f->is_using_template_angle when making ironing filler objects
* Update quality_settings_ironing link from #angle to #angle-offset
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
- Reduced total amount of retraction as stock PTFE liner may not be able to take the heat. (7mm to 3mm)
- Added X Y to final G28 to avoid crashing into prints.
Co-authored-by: frawg <>
* Updated machine start and end gcodes
* fix: Update Kobra 2 Neo profile for improved compatibility
- Switch gcode_flavor from marlin to marlin2
- Enable relative E distances for better extrusion control
- Add M420 S1 to start gcode to enable bed leveling mesh
- Add G92 E0 before layer changes to reset extruder position
- Fix end gcode formatting and add M83 for consistent relative mode
- Adjust purge line start position from Y3 to X10 Y5
* fix: Typo in end machine gcode
---------
Co-authored-by: frawg <>
Update Anycubic Kobra 2 0.4 nozzle.json
Fixed error:
Relative extruder addressing requires resetting the
extruder position at each layer to prevent loss of
floating point accuracy.
* Update Anycubic Kobra 0.4 nozzle.json
Fix incorrect parameters for M204 in start gcode
* Update Anycubic Kobra end_gcode and travel speeds
* Update Anycubic i3 Mega S start and end gcode
Profile created based on information contained in the printer's firmware and profiles recommended by the manufacturer for Cura. It has been tested on various parts including 3DBenchy with more than satisfactory results.
1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas
2. Change default sparse_infill_pattern vaule to ipCrossHatch
