Port of snaporca 5b1294de59. Parity OK: 17 files identical, 8 diverging at their
expected counts.
Every industrial sketcher gives you the origin and the axes as references. Here
the origin was only a SNAP target and the axes did not exist, so Symmetric needed
a third picked ENTITY as its mirror axis: symmetry about the sketch's vertical
axis first required drawing a construction line.
Every constraint reference resolves through four lambdas in the solver
(valid/ptOf/primOf/coordOf), so teaching those about three negative sentinel
indices makes the origin and both axes available to EVERY constraint type at
once. No new SketchEntity type, no serialization change; -1 still means "unset".
The references live in G_FIXED and add no degrees of freedom, which a test
asserts via the reported DoF.
SymmetricAboutY / SymmetricAboutX are two buttons that need no third pick and no
construction line. Making the axes clickable in the viewport is deliberately left
out: that is canvas hit-testing work with its own risks.
Recorded in the tests because it will catch the next person: sys.dragged[] is
populated only during a drag, so a plain sketch_solve of an UNDER-constrained
system may move any free parameter -- solvespace runs Newton, it does not
minimise movement. PointOnLine onto an axis is one equation in two unknowns and
the point legitimately slides along it. Those tests pin the free direction
instead of asserting the other coordinate is untouched.
VERIFICATION LIMIT, as with the previous two commits: this fork's kernel suite
still cannot run (find_package(assimp) fails at configure, snaporca-w80c). The
shared sources are byte-identical to snaporca's, where kernel is 2624 assertions
/ 206 cases and ALL LADDERS HELD across all seven rungs.
Port of snaporca 9fa304c77a. Parity OK: 17 files identical, 8 diverging at their
expected counts.
The everyday dimension in SolidWorks and Onshape, and this kernel had no form of
it. Distance constrains the straight-line gap; LockX/LockY pin one point's
ABSOLUTE coordinate. Neither relates two points along an axis.
DistanceX/DistanceY emit SLVS_C_PROJ_PT_DISTANCE against two unit direction
lines built in the solver's G_FIXED group, so they add no degrees of freedom.
THE DIRECTION IS SIGNED, and getting it backwards is silent. libslvs defines a
LINE_SEGMENT's direction as point[0] - point[1] (entity.cpp) and
PROJ_PT_DISTANCE constrains (pB - pA).dot(dir) (constrainteq.cpp:234), so the
reference lines are built head-first to mean +X and +Y.
The same signedness was a real defect in the GUI: the inline editor was
pre-filled with |delta|, so when the closest endpoint pair ran right-to-left,
opening the dimension and accepting the number shown would flip the point to the
other side of its anchor. Opening a dimension and accepting its own value must
be a no-op. The refs are now ordered so the shown value is positive.
On the CAD-1000-hours corpus, dimensioning and constraining is 31.9% of all
observed CAD time -- the largest single class, 7.6x feature operations. This is
the item in the constraint epic that lands most directly on it.
VERIFICATION LIMIT, as with the previous commit: this fork's kernel suite still
cannot run (find_package(assimp) fails at configure time, snaporca-w80c). The
shared sources are byte-identical to snaporca's, where kernel is 2603 assertions
/ 200 cases and ALL LADDERS HELD across all seven rungs.
Port of snaporca 9ec6405e2d. Parity OK: 17 files identical, 8 diverging at their
expected counts (DesignPanel.cpp 32, test_slvs_constraints.cpp 3).
Measured on the CAD-1000-hours corpus: 51.5% of observed CAD time is 2D sketch
work, and dimensioning/constraining alone is 31.9% -- the largest single class.
Two constraints every industrial sketcher has were missing here.
EqualRadius fixes a dead end rather than adding a feature. Picking two circles
and pressing Equal emitted EqualLength, which maps to SLVS_C_EQUAL_LENGTH_LINES
and constrains nothing on a curve: a silent no-op with no error. Equal is now
one button with two meanings, as in Onshape and SolidWorks.
Collinear emits PARALLEL plus PT_LINE_DISTANCE=0 rather than PT_ON_LINE, whose
internal valP param this libslvs port leaves at 0, drifting an already-collinear
pair.
Both types are appended at the END of SketchConstraintType: cereal serializes it
positionally, so inserting elsewhere reinterprets every saved recipe.
VERIFICATION LIMIT, stated rather than implied: this fork's kernel suite could
NOT be run. scripts/CAD/run-kernel-tests.sh fails at CMake configure time on
find_package(assimp), before any source compiles -- a pre-existing deps gap
(snaporca-w80c), not this change. The shared sources are byte-identical to
snaporca's, where the full gate passed: kernel 2588/195 and ALL LADDERS HELD
across all seven rungs.
Also fixes two defects in this fork's scripts/CAD/run-all-checks.sh:
- `cd $(dirname $0)/..` landed in scripts/ instead of the repo root, so every
rung looked for itself under scripts/scripts/. Broken since the script moved
into scripts/CAD/; the three sibling scripts were fixed then and this was
missed, so the gate has not run since.
- C defaulted to snaporca-gui, the OTHER fork's rig container, so this fork's
gate would drive snaporca's app and report green about the wrong binary.
run-kernel-tests.sh:31 documents the identical defect being fixed once
already for the build volume; this is the third instance.
All 264 QD_* declarations re-derive from their family triples via
--remint Qidi. Only 8 family ids are new: most QIDI-brand products already
carried v3.2-minted ids on older printer series, so the QD-series
declarations converge onto them (QD_0..4_1_1 -> OFKIQO2W "QIDI PLA
Rapido"), and the six Generic families converge onto the shared generic
ids (Generic PLA -> OFDSrzZ8 etc.) by triple math -- no inherits or
compatible_printers changes anywhere.
--update-snapshot retires all 204 QD_* ids with mode-rule successors.
Audit: 204/204 non-null successors, every chain ends at a live id; the
four ids hardcoded in QidiPrinterAgent's non-numeric-series fallback
resolve to the OFL generics (QD_1_0_1 -> OFDSrzZ8, ...). The v4.1 agent
hook translates device-composed QD_* ids through these entries at
runtime, so box behavior is preserved on updated clients.
Known accepted residue (plan v4 SS4): three case/spelling family splits
keep distinct ids for one product line each -- QIDI PC-ABS-FR (series
1-2) vs QIDI PC/ABS-FR (series 3-4) vs Qidi PC-ABS-FR (X-Plus 4), and
QIDI TPU 95A-HF vs Qidi TPU 95A-HF. Renames are ruled out; the ledger's
per-series successors keep each device slot resolving to the right
presets, and a future upstream name unification self-heals through
content addressing.
The code<->ledger lockstep test is now active (un-skipped).
Gates: --check 0; orca_extra_profile_check 0/0; 117 script tests OK
(0 skipped); validator base, -f tree-wide, -v Qidi all exit 0;
libslic3r_tests green; Qidi profile diff is filament_id-value-only.
Qidi.json version bumped.
Brings in 560 commits (merge base 2026-07-04 .. origin/main af9fd10d7a).
19 conflicts resolved; the other 138 touched files auto-merged.
Conflict resolutions
- Snapmaker/Polymaker (7): main normalised JSON key order in #15039 while this
branch inserted filament_id/filament_vendor. Took main's key order and kept
this branch's values, inserting a single filament_id key rather than letting
git's line merge leave duplicate "from"/"instantiation" keys.
- re3D rPETG @0.8/@1.75 nozzle (2): main renamed these from "re3D Greengate
rPETG @*" and re-vendored GreenGate3D -> re3D (#15169). Git's rename-aware
merge produced a file with two filament_vendor keys; took main's version
wholesale instead. The id is reconciled by the tooling, not by hand.
- re3D rPP (1): kept main's inherits change (fdm_filament_pet -> fdm_filament_pp,
local filament_type override dropped) and its widened compatible_printers.
The flattened type is still PP, so the product triple and id OFfHGM1D are
unchanged.
- re3D Greengate rPETG.json, Afinia {ABS+,ABS,PLA,TPU,Value ABS,Value PLA}.json
(7 modify/delete): accepted main's deletions. The Afinia ids are not orphaned
- the surviving @HS presets resolve the same triple and already carry the
same ids, so nothing is retired.
- .github/workflows/check_profiles.yml: kept both main's new "validate slice"
step and this branch's tree-wide filament-subtype check.
- tests/libslic3r/CMakeLists.txt: kept both test_filament_id_succession.cpp and
main's test_preset_diff.cpp.
Verified
- No conflict markers; all 12795 profile JSONs parse with no duplicate keys.
- All branch artifacts (tooling, snapshot, ledger, doc, tests) intact and
unmodified by the merge.
- The succession-ledger C++ call sites survived main's refactors; audited
Preset.{cpp,hpp}, PresetBundle.cpp, DeviceManager.cpp, PresetComboBoxes.cpp,
CaliHistoryDialog.cpp, MoonrakerPrinterAgent.cpp against base/ours/theirs.
- scripts/tests: 115/116 pass.
Known follow-up: assign_filament_ids.py --check reports 243 errors, all from
filament data main added in the last month (BBL/addnorth, Qidi X5/Plus 5,
Snapmaker U1, re3D). The single failing unit test is the live-tree conformance
test asserting that count is zero. Reconciliation lands separately.
* re:3D profile updates.
- Replace vendor-specific "re3D Greengate rPETG" filament with a generic "re3D rPETG" (base + @0.8/@1.75 nozzle variants), matching the naming convention used for rPLA/rPETG elsewhere in the re:3D vendor
pack.
- Add fdm_filament_pp as a proper filament-type parent and switch re3D rPP to inherit from it instead of overriding filament_type on top of fdm_filament_pet.
- Added filament_type to the specific printer JSON file and removed from the base printer JSON file [fixes Issue#14693]
- Updates to speeds and accelerations for re:3D profiles, moved from common to machine processes [closed: PR#14259]
- Updates to fdm profile filename format so that it lists the filename and extruder number in the sliced .gcode file
* Fix setting IDs
* Add rename from for changed material names.
* Add the Qidi Plus 5
* Remove ignored profiles
Qidi didn't register these, so they are essentially dead weight.
* Set Qidi profile version to 02.04.00.10
* Fix redundant QIDI startup tool changes
Guard Q2, X-Max 4, and X-Plus 4 filament-change G-code so same-tool startup selections do not run the full cut, unload, and purge sequence.
* Guard Q2C against redundant startup tool changes
Skip the complete filament-change sequence when the requested tool is already selected during startup.
* Bump Qidi profile version
Adds a printer option that picks up the new tool without a blocking temperature
wait, travels to the wipe tower, and waits there right before purging, parked
beside the tower so the ooze from the heat-up lands next to it rather than on the
model. The incoming filament's target is raised ahead of the tool change, so the
heat-up overlaps both the change itself and the travel to the tower.
Off by default, and only offered for multi-extruder printers using a Type 2 wipe
tower; the generic toolchanger profile enables it.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
SoftFever