* fix: replace extruder_clearance_max_radius with extruder_clearance_radius
* fix: add if m_plater before accessing preset_bundle
* fix: generate thumbnail only when callback is defined
* fix: change default gcode thumbnail format to png
* gui: camera navigation style option
Add camera navigation style config option as a preparation for
introduction of touchpad style navigation
* gui: touchpa-friently 3d navigation
Implement FreeCAD-inspired touchpad-friendly camera operation mode:
- Shift+move: panning
- Alt+move: rotation
Set "Camera mode" to "Touchpad" in settings menu to activate this mode.
* cache current navigation style in class member variable
Cache current navigation style on canvas focus, do not
request settings value each mouse event.
* force focuse 3d preview on preferences window close
Explicitly force focus 3D preview pane on closing preferences window.
This allows preferences be updated only once without checking current
value each input event.
Another benefit is to have 3D view in focus is that user could
immediatelly use 3d-view shortcuts like Ctrl+<1..7> without clicking to
the 3D view first.
* Update_list.txt+OrcaSlicer.pot
I have added missing files for gettext. These files fill in the missing translation strings for Connection / Physical Printer (Obico, SimplyPrint, Flashforge)
src/slic3r/Utils/Obico.cpp
src/slic3r/Utils/SimplyPrint.cpp
src/slic3r/Utils/Flashforge.cpp
src/slic3r/Utils/NetworkAgent.cpp
src/slic3r/GUI/Jobs/OAuthJob.cpp
src/slic3r/GUI/BackgroundSlicingProcess.cpp
* Update Polish translations
* Update OrcaSlicer_pl.po
* Fixing a string_update PrintConfig.cpp
Fixing a string in the PrintConfig.cpp file
The string that hasn't been translated in printer settings
"Disable generating of the M73: Set remaining print time in the final gcode"
* fix_upd
* update_OrcaSlicer_pl.po
* Make httpserver more generic and reusable
* Add OAuthJob
* Fix issue caused by the fact that the backing widget of the `TextCtrl` is no longer `wxTextCtrl`
* Implement login and token refresh
* Implement file upload
* Try fix build error
* Support BBL printers
* Show error message if user hasn't done OAuth
* Fix typo
* Update error message
* Disable unsupported options when SimplyPrint is selected
* Change ensure_vertical_shell_thickness to enum value type. Allow users to turn off this feature completely
* add warning to the tooltip for None option
* Allow apply scarf joint seams to perimeters without sharp corners only
* 1. Fix an error when detect whether a loop is smooth
2. Expose scarf_angle_threshold to UI
* fix linux build error
* minor code changes
* Support slowdown speed for scarf joint only
* update tips
* improve the logic a bit
* Fixed a bug that scarf speed may not respected for overhangs
* Add a new scarf flow ratio option
* Remember z of previous layer
* Support travel to middle of the layer z
* Support sloped extrusion
* Implement sloped seam
* Reduce extra movements
* Don't clip loop if sloped seam is enabled
* Fix wipe
* Ensure `slope_max_segment_length`
* Add options
* Limit slope length to perimeter length
* Fix slope segmentation
* Rename the option to scarf joint seam
* Don't modify the slope option when turning on spiral vase
* Add a few suggestions when turnning on scarf joint
* Add option to add scarf joint to inner walls
* Apply seam gap at the end of the slope
* Add option to explicitly use the entire loop as scarf length
* Fix layer number
* Increase default scarf length to 20mm
* Better way of storing the global scarf state
* Better vase mode layer height recognition
* Move id should exclude seams
* Fix slope height with independent support layer height
* Fix linux build
* Allow controlling the scarf with modifier
* Scarf start height default to 0
* Allow enable scarf seam on contour only
* Fix type error
* Move the creation of sloped loop into ExtrusionEntity.cpp
* Fix error "vector too long"
* Detect seams properly
* The correct way of calculating the rate limit
* The correct way of calculating the rate limit
(cherry picked from commit 05961f7c98)
* Add pressure equalizer in print by object mode
* Remove the settings recommendation as it varies a lot depends on printer & filament
* Add a beta suffix
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* The correct way of calculating the rate limit
* Add pressure equalizer in print by object mode
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Initial integration of ImGuizmo
* Fix mouse capture
* Fix frame update
* Update face color
* Show current camera rotation
* Fix coord mapping
* Update camera rotation from 3d navigator
* Use orthographic
* Render axis
* Make the axis color lighter if at back
* Show axis label
* Fix linux build
* Move to separate method
* Refine
* Add option to show/hide 3d navigator
* Add license info
* Handle dpi scaling
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Asoka Wotulo