Subclass of MoonrakerPrinterAgent for K-series Creality printers
(K2, K2 Plus, K2 Pro) with CFS support. Registers in
NetworkAgentFactory under host_type=crealityprint. Overrides
fetch_filament_info() to defer to base when the host is not a
CFS-capable K-series board, otherwise query the boxsInfo WebSocket
on port 9999, parse the box hierarchy into CFSSlot[], and publish
each loaded slot as an AmsTrayData entry via build_ams_payload()
so they surface in Orca filament UI.
boxsInfo schema reference (verified against K2 Combo F021 firmware
v1.1.260206):
materialBoxs[].materials[] fields: id, state, vendor, type, name,
color, pressure, rfid, percent. state=1 means loaded; box.type=0
is a CFS unit, type=1 is the external spool holder (handled by
the upload dialog).
Accepted CFS boxes are renumbered sequentially since the K2 raw
box.id has gaps for the external spool holder. Model detection is
delegated to CrealityPrint::supports_multi_color_print() added in
PR #13291.
* feat: add UI feedback on http error and some logs
* spelling fix
* show error dialog only once per session
* show errors with plater notification when on developer mode
* remove return
* remove irrelevant logs
GridCellSupportEditor::DoActivate dereferenced
grid->GetSelectedBlocks().begin() without checking against end(). In
wxWidgets 3.1.5 that range always contained at least one block; in 3.3.2
it is empty after the user deselects, and the dereference crashes inside
wxGridBlockCoords::GetLeftCol().
Fall back to the (row, col) that triggered activation when the selection
is empty, so the existing single-cell branch handles it. While here,
drop a dead local_table cast that was never read.
Fix macOS orcaslicer:// deep links after wxWidgets 3.3.2 upgrade
Install an OrcaSlicer-owned kAEGetURL Apple Event handler from
on_init_inner(). The wxWidgets 3.3.2 handler registered in
applicationWillFinishLaunching: stopped delivering URL events to
GUI_App::MacOpenURL on macOS (#13119), so links from Printables /
Thingiverse opened a blank project instead of importing the model.
Registering our own handler late in startup is last-writer-wins on
NSAppleEventManager and routes back to the existing MacOpenURL ->
start_download path, restoring the pre-upgrade behavior without
touching wxWidgets.
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Use glBlendFuncSeparate in GLTexture::render_sub_texture so destination
alpha stays at 1.0. The Wayland compositor honors framebuffer alpha for window compositing; the previous straight-alpha blend reduced dst alpha
at anti-aliased icon edges, making them semi-transparent against the
desktop. RGB blending is unchanged, so X11/Windows/macOS are unaffected.
Delay opening the object-list filament dropdown on wxGTK until the editor
window is mapped, avoiding popup creation without a valid native toplevel.
Also set the GTK transient parent for dropdown popups created from data-view
cell editors.
# Description
Currently, there is some suspicious behavior going on with the logout
flow, adding some logs to potentially catch any unwanted logouts or
unintentional behaviors.
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
When the spool holder is selected for printing, use the opGcodeFile
command with enableSelfTest instead of colorMatch + multiColorPrint.
This matches the protocol used by CrealityPrint desktop for spool
holder prints.
- Detect spool holder mode: any colorMatch entry with box_id 0
- Spool holder: send opGcodeFile + enableSelfTest (single command)
- CFS: send colorMatch + multiColorPrint (existing behavior)
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Show the spool holder (external filament roll) as a selectable option
in the K2 Plus filament mapping dialog. Previously only CFS slots were
shown because the box state filter excluded the spool holder.
- Only skip inactive CFS boxes (type 0, state != 1); spool holder
(type 1) is always available
- Label spool holder slots as "Ext - {type}" in the dropdown
- Auto-match priority is now:
1. CFS exact (type + color)
2. CFS type-only
3. Ext exact (type + color)
4. Ext type-only
5. Positional default
- When Ext is selected (by user or auto-match), disable other combos
since firmware does not support mixing CFS and spool holder
Signed-off-by: Igor Mammedov <niallain@gmail.com>
When the filament mapping dialog opens, automatically select the best
matching CFS slot for each gcode filament by comparing color and type.
Falls back to positional index if no exact match is found.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Query CFS material slots and show colored dropdowns to map gcode
filaments to physical printer slots. Color mapping is passed through
extended_info as colorMatch entries for the multi-color print protocol.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
---
v4:
- Use gcode tool index (T1A, T1B, ...) as colorMatch id instead of
CFS slot tool_id — firmware expects the gcode filament identifier,
not the destination slot
Add enableSelfTest checkbox to CrealityPrintHostSendDialog that
persists across sessions via AppConfig. The checkbox state is
passed to the upload via extendedInfo().
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Add model_name() to map firmware model codes (F008, F012, F021)
to human-readable names (K2 Plus, K2 Pro, K2). Update the send
dialog init() to detect multi-color support and show a group box
with the printer name.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Add CrealityPrintHostSendDialog scaffolding: an empty dialog class
that inherits from PrintHostSendDialog, and Plater wiring to use
it when the host type is CrealityPrint.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
For supported models, start_print() sends colorMatch (filament-to-slot
mapping) followed by multiColorPrint (with optional calibration via
enableSelfTest) instead of the legacy opGcodeFile command. The dialog
passes color mapping and calibration settings through extended_info.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
---
v4:
- Skip "path" form field in multipart upload for multi-color printers
(extra field breaks K2 Plus firmware parser)
- Use fire-and-forget ws.write() for colorMatch and multiColorPrint
instead of ws_send_and_read() (printer sends response asynchronously)
Add query_boxes_info() to discover loaded materials in the CFS
(Creality Filament System) via websocket. Returns the boxsInfo
JSON with slot details (type, color, vendor, temperature range).
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Add a reusable websocket helper that sends a JSON command and loops
reads until finding a response containing the expected key. This
handles the printer's unsolicited status messages that arrive on
connect before the actual response. Returns empty string on timeout
instead of throwing.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Consolidate websocket connection setup into a reusable helper.
Migrate from tcp::socket to beast::tcp_stream for timeout support.
Set SO_RCVTIMEO read timeout (3s) and connect timeout (5s).
Refactor query_boxes_info() and start_print() to use ws_connect().
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Parse the model field from the /info JSON response to enable
model-specific features. Add supports_multi_color_print() which
returns true for K2-platform printers (K2 Plus, K2 Pro, K2).
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Change start_print() from void to bool with a wxString& msg
out-parameter, matching the error handling pattern used by Duet,
MKS, ESP3D and Flashforge. On failure, the error message is now
reported to the user via error_fn instead of being silently
swallowed. Use BOOST_LOG_TRIVIAL for logging instead of std::cerr.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Move duplicate get_host_from_url() implementations from ElegooLink and
OctoPrint into Http as a static method using the curl_url API. This
eliminates code duplication and provides a single reliable URL host
extraction utility for all print host implementations.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
get_host_from_url() returns host:port which may cause
boost::asio::ip::make_address() to fail when a port is present,
bypassing the direct IP upload path and falling through to DNS
resolution via upload_inner_with_host(). Use get_host_from_url_no_port()
to extract just the host.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* unify footer
adds "Done" Buttons,
standardize "Reset" Buttons,
adds disabled logic to "Reset" Buttons
* adds ImGuiWrapper::COL_WARNING = ColorRGB:Warning,
replaces ColorRGB::Warning
* consistently display warnings,
moves assermbly warning after footer,
make cut warnings warning color
* adds separator above cut warnings
* adds tooltip entry in move, rotate & scale for auto-drop
* use wrapper tooltip in wrapper->button for consistent text color
* restructures brim ears button,
renames "Reset" button in painting tools to "Erase All",
small styling fixes
* small adjustments,
moves "Edge detection" checkbox in painting tool underneath,
moves "Section View" in Brim ears tool after buttons,
moves warnings in Assemble tool under footer
* small brim ear tool structure changes,
adds separator between "Head Diameter" and "Max angle",
adds tooltip to "Auto-generate" button,
rewords shortcut descriptions to match other tools
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
* adds UI and preview plane for multiple dovetail cuts
* adds multiple dovetail cuts to perform_with_groove()
* adds ui text info for spacing, adjusts max_val for gap to respect plate dimensions
* adds spacing before multpile UI
* adjusts wording, adjust gap max by count
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add logic to handle the left, middle and right buttons being assigned to do nothing, pan or rotate
* Add entries for setting the drag actions to preferences
* Allow the label text in preferences to wrap
* Show mouse mappings in Help -> Keyboard Shortcuts
* Re-add preferences in updated layout
* Add camera mouse options under camera
* Change mouse action strings to use L() for localization
* Display "None" when it is selected instead of blank in keyboard shortcuts
---------
Co-authored-by: Rob O <robertolabode@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
load_selections() and update_selections() size the parallel project_config
arrays (filament_colour, filament_colour_type, filament_map) off
filament_presets.size(). When the saved list is shorter than the printer's
nozzle count — never-used printer, hand-trimmed conf, or fewer filament_NN
entries than nozzles — the loaded colors get truncated and the sidebar
starts up one combo short.
## Summary
- skip CLI thumbnail generation when an OpenGL/GLFW context cannot be
created, allowing export workflows to continue in headless/automation
environments
- guard filament variant remapping against missing config options and
out-of-range variant indexes
- log warnings instead of dereferencing invalid config state during
CLI/profile-driven export
## Context
These guards came out of automating OrcaSlicer CLI exports for printer
workflows. In that flow, slicing/export can still be valid even when
thumbnail rendering is unavailable, but the current path can proceed
into OpenGL thumbnail setup after context creation fails. Separately,
malformed or mismatched filament/profile state can index past option
vectors during multi-filament value remapping.
## Test plan
- `git diff --check`
- `cmake --build build/arm64 --config RelWithDebInfo --target OrcaSlicer
-- -j4`
# Description
Fixes a macOS object-list filament editor crash/glitch where the
filament column could enter Cocoa native text editing and expose
`wxCustomRendererObject: 0x...` or crash while committing an invalid
`DataViewBitmapText` value.
The visible `wxCustomRendererObject` glitch was observed on macOS
through Cocoa `wxDataViewCtrl` editing. The underlying unsafe
assignment/variant/editor assumptions are not inherently macOS-only, so
the defensive data-path fixes are cross-platform.
Changes:
- Adds an explicit `DataViewBitmapText` assignment operator that avoids
copying the `wxObject` base, matching the existing copy constructor.
- Rejects unexpected variant types before reading object-list
name/filament values as `DataViewBitmapText`.
- Hardens filament editor value extraction against unexpected editor
controls.
- On macOS, routes filament-column editing through the custom
bitmap-choice renderer instead of `wxDataViewCtrl::EditItem()`, avoiding
native text editing of `wxCustomRendererObject`.
Fixes https://github.com/OrcaSlicer/OrcaSlicer/issues/13682
Previous PR with conversation:
[#13684](https://github.com/OrcaSlicer/OrcaSlicer/pull/13684)
This should fix the crash observed by @Noisyfox as we're addressing the
underlying problem of presenting the `wxCustomRendererObject`.
## Tests
Validated on macOS arm64. Repeated double-click/edit attempts on an
unselected object's filament cell no longer show
`wxCustomRendererObject` and no crash reproduced.
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
This can be enabled in Preference->Developer->Keep painted feature after
mesh change.
<img width="731" height="633" alt="init"
src="https://github.com/user-attachments/assets/8b195486-538e-4eda-9e77-bfdf1a794306"
/>
TODO:
- [ ] Bug fixes
- [ ] Make it faster
- Keep painting after other mesh operations such as reload from
disk/simplify/boolean operation etc:
- [x] Planar cut
- [x] Dovetail cut
- [x] Cut with part assigned to other side
- [x] Split to parts
- [x] Split to objects
- [x] Mesh boolean gizmo
- [x] Mesh boolean in right click
- [x] Reload from disk/replace stl (won't work well if mesh changed too
much)
- [x] Fix model
- [x] Simplify/smooth (this two won't work well due to too much mesh
changes)
- [x] Add options in settings since I think this will be experimental
for a long time until being tested by a lot of ppl
