Closes review comments 13, 14 and 15, and adds the test for a shipped-profile
regression that nothing guarded.
- 14 and 15: compute_imex_slice_offset had eight tests on the calculation and none
on the result, which is the whole firmware-managed path. test_imex_slice_offset
now covers the derivation end (which config produces a non-zero offset, and that
it is plate-local rather than moving with the plate origin -- the bug that
shifted every plate after the first) and the consumption end (emitted
coordinates and first_layer_print_min/max both move by the derived amount).
The first_layer case also cross-checks the two consumers against each other: the
declared bounds must keep the same relationship to the emitted toolpaths in both
frames, which fails if exactly one of them is shifted. It deliberately does not
pin the size of that gap -- it is 2.225 mm here, set by the wall generator, the
same with no offset at all, and pinning it would fail on an unrelated change.
- 13: nothing exercised the imex_mode / imex_mode_index / imex_mode_gcode
placeholders or the {global} flow into machine_start_gcode that their ordering
exists to guarantee. Seven cases now do, including the ordering itself -- the
mode script declares a global and machine_start_gcode reads it back, so moving
the mode processing later leaves the variable undefined and fails the export --
plus the inert cases (Primary mode, and a printer with the table filled in but
is_imex off). All matching is whole-line, because the config block the exporter
appends repeats machine_start_gcode verbatim and would make substring checks
meaningless.
- New: GCodeWriter passes this->config.is_imex.value into the heater remap, and
nothing tested that it passes the flag rather than a constant. Hardcode true
there and the whole suite stays green while fdm_bbl_3dp_002_common, which ships
physical_extruder_map [1,0], starts sending filament 0's M104/M109 to heater 1.
The new case runs a two-nozzle non-IMEX printer with that map and asserts each
filament's temperature reaches only its own tool. It uses idle_temperature via
ooze prevention rather than nozzle_temperature: keys in
filament_options_with_variant are re-indexed per filament by variant slot at
apply time, and this harness pins nozzle_diameter to one value, so every filament
resolves to the same slot and the temperatures stop telling the heads apart.
Also fixes two weaknesses in tests added earlier in this branch: an assertion that
would have been prefix-satisfied by the very routing it was meant to exclude, and
a whole-file command comparison between two slices, which this slicer's output is
not stable enough to support.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The wipe tower emitted G4 S0 to make the firmware finish its queued moves
before commands that must not take effect early. Klipper's G4 reads only the
P parameter, so that flush never happened there and a temperature change could
land seconds ahead of the moves it was meant to follow. Klipper now gets M400
instead, through one helper shared by both wipe tower implementations.
No change to any other firmware flavor's output, so no shipped profile or saved
project is affected.
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
* fix: initialize Print::m_isBBLPrinter
Built outside the GUI/CLI (headless tests, embedded use) the member was read
uninitialized: is_BBL_printer()/wipe_tower_type() feed it into ToolOrdering,
which then non-deterministically dropped per-feature filament assignments.
Default it to false, the value the GUI and CLI already assign for non-Bambu
printers.
* docs(test): add the fff_print testing contract
tests/fff_print/README.md codifies how the suite is organized: one file per
subsystem (each owning both in-memory and emitted-G-code assertions), flat
behavioral test names with a single [Subsystem] tag, a robust-tests guide,
the shared helpers, and an add-a-test checklist. Linked from tests/CLAUDE.md.
* test(fff_print): reorganize the suite to the contract and add coverage
Bring every subsystem into one file per the README: rename the test_data
harness to test_helpers; consolidate skirt/brim; split multi-filament and
cooling into their own files; disperse the test_printgcode grab-bag and the
end-to-end smoke scenario into focused tests; fold test_gcode into
test_gcodewriter. Standardize names and tags, align cube tests on the cube()
helper, and de-qualify the flagship files.
New coverage: multi-filament per-feature and per-object routing; a skirt/brim
behavior matrix (the #14333 rework, including brim ears, with regression
coverage for #14319 and #14366); resolved extrusion-width and config
comments; custom-G-code placeholders; fan control and speed-marker
consumption.
Re-enable three slice tests previously tagged [NotWorking]: the clipper
"Coordinate outside allowed range" error that disabled them was specific to a
past CI runner environment and no longer reproduces.
* test(fff_print): tag arm64-flaky skirt/brim tests NotWorking
Four skirt/brim slice tests intermittently throw ClipperLib's "Coordinate
outside allowed range" on the macOS and Windows arm64 CI toolchains (an FP
divergence, not a slicing bug; see PR #14207). Linux x86_64 and aarch64 are
unaffected. Tag them [NotWorking] so ctest -LE NotWorking skips them.
* test(fff_print): re-enable the arm64 skirt/brim tests
These were tagged [NotWorking] as a stopgap when myfork's daily-driver build
combined them with the cross-platform CI on a base that predated upstream's
m_origin fix (99dea01cc3). With upstream merged in, Print::m_origin is
initialized and the "Coordinate outside allowed range" throw is gone, so the
tests pass on macOS/Windows arm64. Drop the tags.
Introduces a plugin capability that runs Python at the seams of Print::process(),
letting a plugin read and rewrite slicing state as it is computed.
- New slicing_pipeline_plugin config option; selected plugin refs are serialized
into the print manifest.
- Print gains an injectable hook fired at each pipeline step (posSlice,
posPerimeters, posInfill, ...). It is a no-op when unset, fires only on genuine
(re)computation, and never on the use-cache path.
- orca.slicing submodule: SlicingPipelineCapabilityBase plus a trampoline and a
Step enum. Capabilities read the live graph through zero-copy int64 numpy views
(contour/holes geometry with unscaled coordinates, flattened toolpath data) and
edit it through 2D-geometry mutators with cache-invariant refresh.
- GUI dispatcher runs capabilities during slicing under the GIL, turns plugin
errors into slicing errors, honors cancellation, and adds the plugin picker.
- Ships the InsetEverySlice sample plugin and binding/hook tests.
Fix Unit Tests CI job silently running zero tests
scripts/run_unit_tests.sh selected tests with `ctest -L "Http|PlaceholderParser"`,
but catch_discover_tests() was called without ADD_TAGS_AS_LABELS, so Catch2 tags
were never registered as CTest labels. The -L filter matched nothing and the job
passed green while running no tests ("No tests were found!!!"). Tests have not run
in CI since PR #11485 added that -L line (2025-12-23).
Register tags as labels via a shared orcaslicer_discover_tests() wrapper in
tests/CMakeLists.txt (passing ADD_TAGS_AS_LABELS), routed through all five test
suites. Restore full-suite execution by replacing the narrow -L selection with a
`-LE NotWorking` exclusion, so all reliable tests gate PRs again (the suite ran in
full before #11485).
Tag the two OrcaCloudServiceAgent display-name tests [NotWorking]: their
constructor reaches wxStandardPaths::Get().GetUserDataDir(), which dereferences
the null wxTheApp in the headless test binary and segfaults on every platform.
Excluded until the agent can be constructed without the wx app context.
CI now runs 151 tests (was 0) and passes.
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
* Get libslic3r tests closer to passing
I can't get geometry tests to do anything useful. I've added extra
output, but it hasn't helped me figure out why they don't work
yet. That's also probably the last broken 3mf test doesn't work.
The config tests were mostly broken because of config name changes.
The placeholder_parser tests have some things that may-or-may-not
still apply to Orca.
* Vendor a 3.x version of Catch2
Everything is surely broken at this point.
* Allow building tests separately from Orca with build_linux.sh
* Remove unnecessary log message screwing up ctest
Same solution as Prusaslicer
* Make 2 TriangleMesh methods const
Since they can be.
* Move method comment to the header where it belongsc
* Add indirectly-included header directly
Transform3d IIRC
* libslic3r tests converted to Catch2 v3
Still has 3 failing tests, but builds and runs.
* Disable 2D convex hull test and comment what I've learned
Not sure the best way to solve this yet.
* Add diff compare method for DynamicConfig
Help the unit test report errors better.
* Perl no longer used, remove comment line
* Clang-format Config.?pp
So difficult to work with ATM
* Remove cpp17 unit tests
Who gives a shit
* Don't need explicit "example" test
We have lots of tests to serve as examples.
* Leave breadcrumb to enable sla_print tests
* Fix serialization of DynamicConfig
Add comments to test, because these code paths might not be even used
anymore.
* Update run_unit_tests to run all the tests
By the time I'm done with the PR all tests will either excluded by
default or passing, so just do all.
* Update how-to-test now that build_linux.sh builds tests separately
* Update cmake regenerate instructions
Read this online; hopefully works.
* Enable slic3rutils test with Catch2 v3
* Port libnest2d and fff_print to Catch2 v3
They build. Many failing.
* Add slightly more info to Objects not fit on bed exception
* Disable failing fff_print tests from running
They're mostly failing for "objects don't fit on bed" for an
infinite-sized bed. Given infinite bed is probably only used in tests,
it probably was incidentally broken long ago.
* Must checkout tests directory in GH Actions
So we get the test data
* Missed a failing fff_print test
* Disable (most/all) broken libnest2d tests
Trying all, not checking yet though
* Fix Polygon convex/concave detection tests
Document the implementation too. Reorganize the tests to be cleaner.
* Update the test script to run tests in parallel
* Get sla_print tests to build
Probably not passing
* Don't cause full project rebuild when updating test CMakeLists.txts
* Revert "Clang-format Config.?pp"
This reverts commit 771e4c0ad2.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Clifford Garwood