Orca content-addresses every system filament, Bambu's included, but a printer,
its AMS and its vendor's cloud know only that vendor's own catalog ids. The
printer agent now translates between the two: outbound MQTT and FTP traffic, the
AMS mapping sent with a print job, and the ids written into a 3mf bound for the
printer all leave in the printer's own ids, while status messages, loaded
projects and SD-card prints arrive in Orca's. An id with no mapping passes
through unchanged, and an agent whose printers already speak Orca's ids
translates nothing at all.
Bambu's map is generated from BambuStudio's own shipped bundle; a missing or
unreadable file leaves every lookup an identity rather than taking the app down.
The profile check validates the map's shape, and profile CI now runs on the paths
that can change it. docs/HLSD/filament_id.md records the places the map
deliberately does not reach.
* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
Brings in 560 commits (merge base 2026-07-04 .. origin/main af9fd10d7a).
19 conflicts resolved; the other 138 touched files auto-merged.
Conflict resolutions
- Snapmaker/Polymaker (7): main normalised JSON key order in #15039 while this
branch inserted filament_id/filament_vendor. Took main's key order and kept
this branch's values, inserting a single filament_id key rather than letting
git's line merge leave duplicate "from"/"instantiation" keys.
- re3D rPETG @0.8/@1.75 nozzle (2): main renamed these from "re3D Greengate
rPETG @*" and re-vendored GreenGate3D -> re3D (#15169). Git's rename-aware
merge produced a file with two filament_vendor keys; took main's version
wholesale instead. The id is reconciled by the tooling, not by hand.
- re3D rPP (1): kept main's inherits change (fdm_filament_pet -> fdm_filament_pp,
local filament_type override dropped) and its widened compatible_printers.
The flattened type is still PP, so the product triple and id OFfHGM1D are
unchanged.
- re3D Greengate rPETG.json, Afinia {ABS+,ABS,PLA,TPU,Value ABS,Value PLA}.json
(7 modify/delete): accepted main's deletions. The Afinia ids are not orphaned
- the surviving @HS presets resolve the same triple and already carry the
same ids, so nothing is retired.
- .github/workflows/check_profiles.yml: kept both main's new "validate slice"
step and this branch's tree-wide filament-subtype check.
- tests/libslic3r/CMakeLists.txt: kept both test_filament_id_succession.cpp and
main's test_preset_diff.cpp.
Verified
- No conflict markers; all 12795 profile JSONs parse with no duplicate keys.
- All branch artifacts (tooling, snapshot, ledger, doc, tests) intact and
unmodified by the merge.
- The succession-ledger C++ call sites survived main's refactors; audited
Preset.{cpp,hpp}, PresetBundle.cpp, DeviceManager.cpp, PresetComboBoxes.cpp,
CaliHistoryDialog.cpp, MoonrakerPrinterAgent.cpp against base/ours/theirs.
- scripts/tests: 115/116 pass.
Known follow-up: assign_filament_ids.py --check reports 243 errors, all from
filament data main added in the last month (BBL/addnorth, Qidi X5/Plus 5,
Snapmaker U1, re3D). The single failing unit test is the live-tree conformance
test asserting that count is zero. Reconciliation lands separately.
* Fix issue that switching printer profile is slow.
`wxGetApp().get_tab(preset_type)->select_preset(preset_name);` is called twice when switching printer profiles. Only one needed.
* Avoid unnecessary type conversion & function call during printer profile switching:
- Don't call `config->opt_string("printer_model")` repeatedly
- Use ref when possible during iterating
- Avoid unnecessary `wxString` to `std::string` conversion
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
Multi-nozzle sync widget, AMS rack-nozzle mapping popup, calibration rework, send-dialog nozzle mapping and extruder-count UI. Includes the fix to persist the AMS sync badge on filament cards (H2C/A2L and direct-sync printers).
Implements phase v3.0 of filament_id_plan_v3.md - tooling and client
prerequisites. No filament_id values change in this commit.
Tooling (scripts/assign_filament_ids.py; 106 unit tests):
- The mint key becomes "filament_product/<filament_vendor>/<filament_type>/
<family_name>", resolved loader-faithfully from the declarer's flattened
config - bundle-independent and content-addressed; identity fixes re-id
by design and are made safe by the succession ledger. --mint now takes
the triple.
- The snapshot gains "triples" and "triple_exceptions" sections, folded
into the equality gate: any vendor/type/name change surfaces as a
reviewable snapshot diff. Check 3 rewritten to triple-mint conformance
with (id, triple) grandfathering; check 5 generalized from OFL generics
to every OFL-riding vendor preset; new check 8 (triple integrity) and
check 9 (succession integrity).
- The retired ledger moves to resources/profiles/retired_filament_ids.json
so it ships with the app; schema {claims, successor} plus cross-island
"hints". The 14 v1 entries are migrated with mode-rule successors.
Vanished ids in a foreign island's space (GF*/QD_*) are RELEASED with a
hint instead of retired: the island catalog owns them and may
legitimately (re)ship them, which check 4 must never block.
- New maintenance modes: --remint VENDOR, --drop-redundant-ids VENDOR,
--add-hint "OLD=NEW", and --update-snapshot --forget-never-shipped FILE
(never-shipped ids drop from lineage; chains splice through them).
Runtime (C++):
- Succession helpers in libslic3r/Preset (pure chain-follow + lazy ledger
load from resources), consulted only on resolution miss in
get_filament_by_filament_id, both AMS sync predicates,
add_ams_filaments, setting_id_to_type, and the calibration-history
lookup; behavior is byte-identical while the ledger has no matching
entry. Catch2 coverage in tests/libslic3r.
- W1 hardening: check_ams_filament_valid no longer remote-wipes trays or
rewrites temps for P-shaped ids that a system preset carries (ten such
system ids ship today); the size==8 && [0]=='P' assert is relaxed; the
unguarded filament_list find deref in the temp-equation check returns
non-destructively on a miss.
- MoonrakerPrinterAgent: the 23 hardcoded OFL generic ids are replaced by
a runtime lookup of "Generic <family> @System" (id-equivalent on
today's shipped profiles, follows future re-mints automatically);
scripts/test_moonraker_lane_data.py derives its expectations from the
shipped profiles and gains --check-ofl-map.
Profile data (W3 - type is now a key component, so type bugs are fixed
before any re-mint):
- 17 same-name-different-type groups corrected across 50 files (OFL
Generic PETG-CF/PE-CF/PP-CF; Flashforge ASA Basic/ASA-CF/ABS-CF/HIPS/
PAHT-CF/PLA Silk; FusRock PAHT; Creality Generic PA6-CF; InfiMech PETG;
Anycubic TPU 95A / TPU for ACE; Prusa Generic PA-CF/PLA-CF) - every
value validated against MaterialType::all(); 3 Snapmaker U1 roots gain
their missing filament_vendor. Flattened-config equivalence vs the
previous commit: exactly the 54 intended diffs, zero BBL.
- doc/developer-reference/filament_id.md rewritten for the v3 rule.
Ambiguous type divergences (Prusa Generic TPU/TPU HF FLEX-vs-TPU, FusRock
S-Multi/S-PAHT) and all same-type vendor-tag divergences are deferred to
the v3.2 vendor worksheets, catalogued with analysis.
* Don't show unsupported presets in drop down list, since it's not useful
* Add option to show unsupported presets
* Explicitly set the default value to `false`
* update filament list without restart on preference change
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Fix issue that printer name disappear if profile (other than the first one among its variants) is modified
for printers that have multiple variants with different nozzle size
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
Fix missing dirty marker for edited system printer presets
System printer presets did not display the modified (“*”) marker in the sidebar when edited. Unlike other preset types, printer presets use `printer_model` as their display label, bypassing the normal dirty-state formatting.
This patch prepends the modified suffix to the displayed name when the selected system printer preset is dirty, restoring consistent UI behavior across all preset types.
* Fix Gtk-Critical assertion in PresetComboBoxes
Resolve the `gtk_cell_layout_get_cells: assertion GTK_IS_CELL_LAYOUT
failed` error by switching from `gtk_cell_layout_get_cells()` to
`gtk_container_get_children()` with direct PangoLayout ellipsization
on GtkEntry widgets.
Picked from PrusaSlicer:
https://github.com/prusa3d/PrusaSlicer/commit/e855ab5d
* Add defensive guards for GTK widget sizing
Fix Gtk-CRITICAL assertions in TextInput and DropDown widgets that
occur when the widget attempt relative sizing against window size
before GTK completes the window layout.
Changes include:
- TextInput.cpp: Clamp textSize.x >= -1 to prevent
`gtk_widget_set_size_request` failures.
- Picked from Prusa Slicer:
https://github.com/prusa3d/PrusaSlicer/commit/e855ab5d
- DropDown.cpp: Guard against zero/negative dimensions during early
initialization:
- Prevent szContent.x = 0 when parent size is unavailable.
- Unique to OrcaSlicer
- Triggers during initializing DesignerPanel --> BasicInfo -->
License DropDown before a parent size is available.
- Latent bug exists in Bambu Studio, but Bambu does not have
License field enabled on this panel.
- Created global guard for future resilience.
- Clamp szContent.y >= 1 for dropdowns before content initialized.
- Bug exists in BambuStudio
- Prusa did not implement the "ENH: ComboBox Second DropDown"
- Add safeguards for invalid idx when opening color picker
- Prevent crash when filament color data is missing or uninitialized
- Simplify private member variable naming in filament picker dialog
jira: STUDIO-12956
Change-Id: I455565bdac769f497f22f884e19cd0cbb04fb8c3
(cherry picked from commit 705ad911ee81395b2162ae67a8f64e237f6a3c5d)
- Display RGB values when a custom color is selected
- Prevent official color picker dialog from closing when custom color dialog is canceled
- Ensure multi-color materials are correctly displayed when importing new 3MF files
jira: STUDIO-12938, STUDIO-12937, STUDIO-12933, STUDIO-13110
Change-Id: Iab410585bf8cc5e9e81c6f0da23fe4ddba561785
(cherry picked from commit 2c20d591b998b02b0b66ac81b048a28fa26bd409)
- Applied dark theme styling to filament picker dialog
- Fixed color picker background not updating on theme switch
jira: STUDIO-12935
Change-Id: I9c7dcc518e7b0bd2c330f477ee42f4c61ea9fd4b
(cherry picked from commit 66ae7a02b945ff603b2dc699c93e55589481379e)
- Add a filament picker dialog for official color selection
- Enable displaying multiple filament colors in the picker dialog and preview sidebar
- Introduce two new config options:
- `filament_multi_colors`
- `filament_color_types`
to both the application config and the 3MF config
jira: STUDIO-12346
Change-Id: I66f8c1ec9147df4f5948c8a329c1737551280e63
(cherry picked from commit 522dc0bbca49033a1ba9725ca7f6c3ea729691a6)
Ian Chua