and fix the nozzlechange's error cleanbox.
and fix some error in interface's nozzlechangle and toolchange.
jira: none
Change-Id: I2fd5c68d90506fcb8f01f09a8246dfb5838baef4
(cherry picked from commit 6c5b63db246a1f42e34225c5561fb8b0975da53b)
and reduce the toolchange speed if it occurs at the contact surface
jira: none
Change-Id: Ic238671366145bc7bff76d18d20c104a201a1f17
(cherry picked from commit fb9f9f41e618c5064032b85351363029307e209c)
when switch printer, we found some filament preset not visible
and we need to allow it to be selected
jira: STUDIO-9979
Change-Id: I9613747a755f449c2f48563082b6893e426f37ea
(cherry picked from commit bc5514bbabbbaddefb33ade556a0f15c051aed7e)
1. Try to merge filaments before grouping
2. Set max match num for machine filamnet in match mode
jira:STUDIO-10392
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2451d838e07ee02f493fda4dc702f3d13b2ad37b
(cherry picked from commit d15fc37ff2fa048e38a0b132bb3ae525ff666fab)
and set the contact surfaces of different material types as solid,
and reduce the nozzlechange speed if it occurs at the contact surface,
and recuce the toolchange speed if it occurs at the contact surface.
jira: none
Change-Id: I884d60f4114544dfa959bd654ecc985f5fb9aac4
(cherry picked from commit ed7bfd3ff6732efe6c7e9eb96901be1db00bb3d0)
1. the nozzle change gcode use double perimeter width
2. fix the error layer height for adaptive layer height
3. limit the nozzle change speed to 50 when a bridge is detected
4. fix the error extrusion flow for filament change gcode when a bridge is detected
jira: STUDIO-10269
Change-Id: I580c618555fe19d000a56e2510a42004722c1b8b
(cherry picked from commit 5c56b43166ab32b09da31b7046efbbcbe3cbc9c8)
1. Add filament_is_support field. Format the filament type
2. Optimize machine filament info logic
jira:STUDIO-10326
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia8bfc37095339e73c98209b4e3f1e0804e511e88
(cherry picked from commit 001144400b841629439a890d46fa40a7296689ba)
of the wipe tower's outer wall to use the actual outer wall path.
jira: none
Change-Id: Ib45ecbc328c88c1abe6d9e8567f715331a3ddd37
(cherry picked from commit 0a20f1fe6d6d63cdcb13bc19fd9ae553f45b6f59)
and fix wipe error when enable timelapse and in single color
and set rib wall as default
jira: none
Change-Id: Ic365bb7ee0ee6715c9d4f4f00b4bca9fd472c61a
(cherry picked from commit 89b59f1c41e0f360457622438a09237bfa1eaa18)
1.Caused by too big tolerance
jira:STUDIO-10236
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0ba182991bc70ca2d3a34a85b87fa7539c5e50d9
(cherry picked from commit d2ae5ea32c55c0023b27fac73a7479c2bd9a7e1c)
and reduce the travel speed inside the wipe_tower
jira: none
Change-Id: I3b07ee62623e0cdc2f1824f0011f95776020bee1
(cherry picked from commit 1aad582e08229fad1f935e257c1335dcfdbe406c)
2. use most used extruder for timelapse without wipe tower
3. apply retract_when_changing_layer for multi_extruder
jira: none
Change-Id: I4ff00573fd8a6ee9fa42877e3e7056d547e4d864
(cherry picked from commit 4715fa14edf2bdfc1170b0461da699903a3078a4)
when enable timelapse_print without toolchange;
jira: none
Change-Id: I4c89acc70ee122c0ad504d97c003ebb4016567d1
(cherry picked from commit 6350ebf9b651a933ab8a9030da9cdf9b1608cff0)
for X and P machine
2. remove lift and retract in filament_change_gcode and layer_change_gcode
jira: none
Change-Id: I3da2d3ac7f0100d1963dcbb1228323666a060534
(cherry picked from commit 5c3d804b9fbe65532d2717e60b5f1143710b0ecf)
1. support traditional timelapse for H2D when printing by object
2. insert timelapse gcode when close wipe tower
3. remove hard gcode before filament gcode
jira: none
Change-Id: Ib56c21b1f07832f2cbc8ba5ab7f2e8653b3105bf
(cherry picked from commit 7613474cefd210685d16a5585608c0c7cb7efa95)
(cherry picked from commit fff787345625a0031934e609b1b3709e39decd4a)
1.Add a Trietree to match command instead of the switch sentence.
2.Support VM104 and VM109
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5f6b3d1bf87baebc0a20c2589a5138538469dfec
(cherry picked from commit 85cb4a41c2a7e42552d7b8c04864e5199ae942e9)
Only update the last group id if there really has filaments
jira:STUDIO-10108
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I646f54c0bc4817f0b64364edc52b7263d2833c3c
(cherry picked from commit c6a12c38c589e15194a13632397754338cc82c93)
