Port of snaporca 5b1294de59. Parity OK: 17 files identical, 8 diverging at their
expected counts.
Every industrial sketcher gives you the origin and the axes as references. Here
the origin was only a SNAP target and the axes did not exist, so Symmetric needed
a third picked ENTITY as its mirror axis: symmetry about the sketch's vertical
axis first required drawing a construction line.
Every constraint reference resolves through four lambdas in the solver
(valid/ptOf/primOf/coordOf), so teaching those about three negative sentinel
indices makes the origin and both axes available to EVERY constraint type at
once. No new SketchEntity type, no serialization change; -1 still means "unset".
The references live in G_FIXED and add no degrees of freedom, which a test
asserts via the reported DoF.
SymmetricAboutY / SymmetricAboutX are two buttons that need no third pick and no
construction line. Making the axes clickable in the viewport is deliberately left
out: that is canvas hit-testing work with its own risks.
Recorded in the tests because it will catch the next person: sys.dragged[] is
populated only during a drag, so a plain sketch_solve of an UNDER-constrained
system may move any free parameter -- solvespace runs Newton, it does not
minimise movement. PointOnLine onto an axis is one equation in two unknowns and
the point legitimately slides along it. Those tests pin the free direction
instead of asserting the other coordinate is untouched.
VERIFICATION LIMIT, as with the previous two commits: this fork's kernel suite
still cannot run (find_package(assimp) fails at configure, snaporca-w80c). The
shared sources are byte-identical to snaporca's, where kernel is 2624 assertions
/ 206 cases and ALL LADDERS HELD across all seven rungs.
Port of snaporca 9fa304c77a. Parity OK: 17 files identical, 8 diverging at their
expected counts.
The everyday dimension in SolidWorks and Onshape, and this kernel had no form of
it. Distance constrains the straight-line gap; LockX/LockY pin one point's
ABSOLUTE coordinate. Neither relates two points along an axis.
DistanceX/DistanceY emit SLVS_C_PROJ_PT_DISTANCE against two unit direction
lines built in the solver's G_FIXED group, so they add no degrees of freedom.
THE DIRECTION IS SIGNED, and getting it backwards is silent. libslvs defines a
LINE_SEGMENT's direction as point[0] - point[1] (entity.cpp) and
PROJ_PT_DISTANCE constrains (pB - pA).dot(dir) (constrainteq.cpp:234), so the
reference lines are built head-first to mean +X and +Y.
The same signedness was a real defect in the GUI: the inline editor was
pre-filled with |delta|, so when the closest endpoint pair ran right-to-left,
opening the dimension and accepting the number shown would flip the point to the
other side of its anchor. Opening a dimension and accepting its own value must
be a no-op. The refs are now ordered so the shown value is positive.
On the CAD-1000-hours corpus, dimensioning and constraining is 31.9% of all
observed CAD time -- the largest single class, 7.6x feature operations. This is
the item in the constraint epic that lands most directly on it.
VERIFICATION LIMIT, as with the previous commit: this fork's kernel suite still
cannot run (find_package(assimp) fails at configure time, snaporca-w80c). The
shared sources are byte-identical to snaporca's, where kernel is 2603 assertions
/ 200 cases and ALL LADDERS HELD across all seven rungs.
Port of snaporca 9ec6405e2d. Parity OK: 17 files identical, 8 diverging at their
expected counts (DesignPanel.cpp 32, test_slvs_constraints.cpp 3).
Measured on the CAD-1000-hours corpus: 51.5% of observed CAD time is 2D sketch
work, and dimensioning/constraining alone is 31.9% -- the largest single class.
Two constraints every industrial sketcher has were missing here.
EqualRadius fixes a dead end rather than adding a feature. Picking two circles
and pressing Equal emitted EqualLength, which maps to SLVS_C_EQUAL_LENGTH_LINES
and constrains nothing on a curve: a silent no-op with no error. Equal is now
one button with two meanings, as in Onshape and SolidWorks.
Collinear emits PARALLEL plus PT_LINE_DISTANCE=0 rather than PT_ON_LINE, whose
internal valP param this libslvs port leaves at 0, drifting an already-collinear
pair.
Both types are appended at the END of SketchConstraintType: cereal serializes it
positionally, so inserting elsewhere reinterprets every saved recipe.
VERIFICATION LIMIT, stated rather than implied: this fork's kernel suite could
NOT be run. scripts/CAD/run-kernel-tests.sh fails at CMake configure time on
find_package(assimp), before any source compiles -- a pre-existing deps gap
(snaporca-w80c), not this change. The shared sources are byte-identical to
snaporca's, where the full gate passed: kernel 2588/195 and ALL LADDERS HELD
across all seven rungs.
Also fixes two defects in this fork's scripts/CAD/run-all-checks.sh:
- `cd $(dirname $0)/..` landed in scripts/ instead of the repo root, so every
rung looked for itself under scripts/scripts/. Broken since the script moved
into scripts/CAD/; the three sibling scripts were fixed then and this was
missed, so the gate has not run since.
- C defaulted to snaporca-gui, the OTHER fork's rig container, so this fork's
gate would drive snaporca's app and report green about the wrong binary.
run-kernel-tests.sh:31 documents the identical defect being fixed once
already for the build volume; this is the third instance.
Six of the surface entries, both Thicken variants, Rib, Axis, Coord Sys,
Mate and Delete Face all reused a sibling's glyph, so a drawer opened as a
column of identical faces and the card that opened rarely matched the entry
clicked. Fixed both halves: entry icons are now unique within their drawer,
and each card header uses the icon of the entry that opens it.
Two new glyphs, design_thicken and design_rib, are the only ones added —
everywhere else an existing icon already carried the right meaning
(design_revolve, design_offset, design_line, design_point,
design_c_coincident, design_delete).
The Surface drawer BUTTON deliberately keeps design_surface; only its
entries may reuse the solid glyphs, because a menu row carries its own
text label while two adjacent toolbar buttons do not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The Surface drawer used design_extrude, the same face as the Add-material
drawer, so the two buttons were indistinguishable in the feature bar.
design_surface.svg is a draped patch — deliberately unlike design_plane (a flat
parallelogram) and design_extrude (a box with an up-arrow) — with a faint
interior rule so it reads as a skin rather than a solid face. Same visual
language as the other 71: 24x24, no fill, #b6b6b6, stroke-width 0.85, round
caps and joins.
The five surface ENTRIES that also used design_extrude now use it too. That is
not cosmetic tidying: a flyout button's face follows the last-picked entry
(SetBitmap_(icon_names[i])), so changing only the drawer's default icon would
have been undone the moment the user picked anything. Surface Loft keeps
design_loft, which already suits it.
The six rows still share one glyph between them, so they are told apart by
label alone inside the flyout. Per-entry icons belong with snaporca-vrg
(Draft/Shell reusing design_dressup), not here.
Compiles clean; kernel untouched. Icon confirmed legible on hardware.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Catches the fork up from 449a4cf9fc (2026-06-28) to d6cb667b89 (2026-07-24).
Upstream touched 2326 files; 17 of them overlap the 164 this branch touches.
16 of the 17 auto-merged, including all three CMakeLists.txt, the build_all.yml
CI workflow, and every GUI file. The CAD core never conflicts: CadDocument,
SketchEngine, SketchSolver, McpControl and test_caddocument are files this fork
adds, so upstream does not touch them.
The one conflict, tests/libslic3r/test_3mf.cpp, was purely additive in all three
hunks and is resolved as a union: our test pinning that store_bbs_3mf embeds the
CAD recipe as Metadata/SnapOrca_cad.bin, upstream's multi-nozzle plate-metadata
round-trip tests, and both sets of includes. All three were verified present
after resolution rather than assumed.
NOT BUILD-VERIFIED, for a reason that predates this merge and is not caused by
it: this fork cannot be configured on nativedev at all. Its CMakeLists has
required Eigen3 5.0.1 since before the merge (line 592 pre-merge), while the
only deps image on the machine is snaporca-deps, built for snaporca's
find_package(Eigen3 3.3). CMake fails at configure, so nothing compiles.
That means this fork's Catch2 suite has never run. Every "suite green" figure
recorded for M1-M8 was snaporca's suite; the ports were verified by patch-apply
plus the CAD sources being byte-identical to snaporca's. Building an orca_cad
deps image with Eigen 5.0.1 is what would finally close that gap.
Pre-merge state is preserved at branch cad-mainline-pre-upstream-2026-07-25
(30d54f0074).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
When a print fails, DeviceErrorDialog now fetches the printer's captured camera
frame of the failure and shows it in place of the generic HMS illustration,
falling back to the local image and a drawn placeholder on older plugins or errors.
- Agent: add get_hms_snapshot through NetworkAgent / IPrinterAgent (BBL calls the
bound plugin symbol; other agents no-op, so old plugins degrade gracefully).
- DeviceManager: parse and clear m_print_error_img_id from the print-error message.
- Dialog: tiered cloud/local/placeholder image reusing the single image widget,
with a liveness-guarded async callback decoded on the UI thread.
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
The engine already implements prime_volume_mode (Default/Saving/Fast)
but nothing in the UI could set it, leaving prime-saving unreachable on
multi-sub-nozzle extruders and fast purge unreachable on printers that
support it.
- new PurgeModeDialog with selectable Standard/Fast or
Standard/Prime Saving cards depending on printer capability
- "Purge mode" sidebar button next to Flushing volumes; opens the
dialog and stores the choice in the project config
- printer preset-load gating: button shown only when the printer has
multiple sub-nozzles per extruder or sets support_fast_purge_mode;
stale project values the printer cannot honor reset to Default
- enable fast purge on A2L 0.4 (support_fast_purge_mode), explicit
default 0 in the common machine base
- new dialog strings added to OrcaSlicer.pot
Printers without these capabilities never show the button and their
projects keep prime_volume_mode at Default, so slicing output is
unchanged.
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
DesignPanel's per-body colour button references icon "color_palette" but the
asset was never ported with the CAD subsystem. On mainline OrcaSlicer the
missing bitmap throws during MainFrame construction → segfault at startup
(create_scaled_bitmap "Could not load bitmap: color_palette"). Copied from
snaporca-cad resources; runtime-loaded, no rebuild needed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
* Fix junction deviation and jerk settings behavior
Process settings now follow the selected printer's junction deviation
configuration. When machine_max_junction_deviation is enabled,
default_junction_deviation is shown and jerk settings are hidden. When
junction deviation is disabled, jerk settings are restored and
default_junction_deviation is hidden.
Fix a validation issue where junction deviation mismatch warnings could
be reported even when machine_max_junction_deviation was set to 0.
Warnings now apply only when junction deviation is active and point
directly to default_junction_deviation.
Also simplify Motion ability page visibility checks by reusing local
firmware-flavor booleans.
* GUI tweak
- separate Junction Deviation segment
- JD and Jerk stay visible
* init
* update translations
* clarify warning for rebuild
* auto fill issue field on github with gathered system information
* add detection for linux package type
* fix build errors
* update
* update
* improve reading windows version
* add multi file support for zip and use timestamp on exported zip name
* fix errors
* fix errorz
* fix URL encoding
* fix CPU info
* use home or desktop as default location
* fix distro name on flatpak
* improve detecting local build on linux
* check package type on all platforms
* optimize margins
* improve monitor detection
* add support for adding text file to zip and add system info on export
* exclude user related info from config
* improve exporting profile info
* fix linux monitor info
* update
* update detecting monitor info
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* revert scaling and resolution detection for linux
* include project file to zip and notify after saving zip successfully saved
* improve monitor info on mac
* update
* improve packing selection menu
* update
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* update
* update
* make hash clickable
* fix compatible process counting
* export profiles overview instead copying to clipboard
* auto restart app after cleaning system folder
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Renamed 'param_extruder_clearence.svg' to 'param_extruder_clearance.svg' and updated the corresponding resource reference in Tab.cpp to correct the spelling error.
Co-authored-by: Nanashi <53353250+NanashiTheNameless@users.noreply.github.com>
Tommaso Bianchi