Every remaining legacy filament_id outside the BBL/QD_* islands re-derives
from its product triple (filament_vendor / filament_type / family name),
completing the content-addressed id model of filament_id_plan_v3.md:
- Relocation pre-step: 14 fdm_filament_* template forks (Cubicon x3,
Prusa x6, RH3D x6 minus the pc fork already re-homed) stop declaring
ids; the 16 presets that rode Prusa's forks now declare the id they
already resolved (verified zero effective-id drift over all 5892
instantiated presets).
- --drop-redundant-ids: 6 Custom/MyToolChanger generics drop copied GF
ids and ride their OFL families.
- --remint over all 62 non-island vendors: 2647 declarations re-derived;
identical products converge cross-bundle (showcase: PolyLite PLA is now
OF5CgdDq in OrcaFilamentLibrary, Qidi, OrcaArena and Snapmaker).
- Prusament @XL completions surfaced by the relocation: filament_vendor
["Prusa Polymers"] on the 8 @XL declarers; Prusament PA-CF typed
PA11-CF (the product is Prusament PA11CF) and PC-CF typed PC-CF
(-CF family typed as base polymer); each family converges on one id.
- Succession: 331 ids retired with mode-rule successors, 355 never-shipped
v1 mints forgotten with chain splicing, 151 GF-shaped ids released to
the island space with hints, 27 curated BBL-generic -> OFL-generic
hints (GFL99 -> OFDSrzZ8 class). New --retire "OLD=NEW" maintenance
mode records lineage for OGFC99/OGFG99/OGFN99 (the shipped ids of OFL's
Generic PC/PETG/PA in released versions, whose claims migrated in v3.1
while Cubicon's inert fork declarations kept them alive).
- Retiring the P-hex system ids removes the last system ids from
check_ams_filament_valid's destructive P-gate.
- AMS-ambiguity fixes surfaced by convergence (validator -f): 4 presets
riding another family's id through inherits now declare their true
family id (Elegoo Generic ASA-CF/PETG-CF, Snapmaker PolyLite Dual PLA /
PolyLite J1 PLA); 9 Cubicon @base presets and Dremel Generic PLA, which
duplicate their per-printer variants on the same printers, split onto
the salt-1 iteration of their triple (sanctioned by the mint-conformance
check; --remint now leaves salt-conformant declarations alone).
Gates: assign_filament_ids --check 0; orca_extra_profile_check 0;
116 python unit tests; config-equivalence over all 5892 instantiated
presets (byte-identical configs except the 14 sanctioned Prusament
vendor/type corrections; setting_id and compatible_printers unchanged;
per-family convergence and ledger conservation verified); profile
validator base/-f/-r(BBL)/-r(Qidi) all green; libslic3r_tests 48610
assertions; Moonraker OFL generic map check; custom-preset fixture
archives v1.9.0-v2.4.1.
Implements phase v3.0 of filament_id_plan_v3.md - tooling and client
prerequisites. No filament_id values change in this commit.
Tooling (scripts/assign_filament_ids.py; 106 unit tests):
- The mint key becomes "filament_product/<filament_vendor>/<filament_type>/
<family_name>", resolved loader-faithfully from the declarer's flattened
config - bundle-independent and content-addressed; identity fixes re-id
by design and are made safe by the succession ledger. --mint now takes
the triple.
- The snapshot gains "triples" and "triple_exceptions" sections, folded
into the equality gate: any vendor/type/name change surfaces as a
reviewable snapshot diff. Check 3 rewritten to triple-mint conformance
with (id, triple) grandfathering; check 5 generalized from OFL generics
to every OFL-riding vendor preset; new check 8 (triple integrity) and
check 9 (succession integrity).
- The retired ledger moves to resources/profiles/retired_filament_ids.json
so it ships with the app; schema {claims, successor} plus cross-island
"hints". The 14 v1 entries are migrated with mode-rule successors.
Vanished ids in a foreign island's space (GF*/QD_*) are RELEASED with a
hint instead of retired: the island catalog owns them and may
legitimately (re)ship them, which check 4 must never block.
- New maintenance modes: --remint VENDOR, --drop-redundant-ids VENDOR,
--add-hint "OLD=NEW", and --update-snapshot --forget-never-shipped FILE
(never-shipped ids drop from lineage; chains splice through them).
Runtime (C++):
- Succession helpers in libslic3r/Preset (pure chain-follow + lazy ledger
load from resources), consulted only on resolution miss in
get_filament_by_filament_id, both AMS sync predicates,
add_ams_filaments, setting_id_to_type, and the calibration-history
lookup; behavior is byte-identical while the ledger has no matching
entry. Catch2 coverage in tests/libslic3r.
- W1 hardening: check_ams_filament_valid no longer remote-wipes trays or
rewrites temps for P-shaped ids that a system preset carries (ten such
system ids ship today); the size==8 && [0]=='P' assert is relaxed; the
unguarded filament_list find deref in the temp-equation check returns
non-destructively on a miss.
- MoonrakerPrinterAgent: the 23 hardcoded OFL generic ids are replaced by
a runtime lookup of "Generic <family> @System" (id-equivalent on
today's shipped profiles, follows future re-mints automatically);
scripts/test_moonraker_lane_data.py derives its expectations from the
shipped profiles and gains --check-ofl-map.
Profile data (W3 - type is now a key component, so type bugs are fixed
before any re-mint):
- 17 same-name-different-type groups corrected across 50 files (OFL
Generic PETG-CF/PE-CF/PP-CF; Flashforge ASA Basic/ASA-CF/ABS-CF/HIPS/
PAHT-CF/PLA Silk; FusRock PAHT; Creality Generic PA6-CF; InfiMech PETG;
Anycubic TPU 95A / TPU for ACE; Prusa Generic PA-CF/PLA-CF) - every
value validated against MaterialType::all(); 3 Snapmaker U1 roots gain
their missing filament_vendor. Flattened-config equivalence vs the
previous commit: exactly the 54 intended diffs, zero BBL.
- doc/developer-reference/filament_id.md rewritten for the v3 rule.
Ambiguous type divergences (Prusa Generic TPU/TPU HF FLEX-vs-TPU, FusRock
S-Multi/S-PAHT) and all same-type vendor-tag divergences are deferred to
the v3.2 vendor worksheets, catalogued with analysis.
Phase 2 of the filament_id cleanup (69 within-vendor collision groups plus
the 9 live library-cross groups on Creator 5/5 Pro). 507 filament_id edits +
12 compatible_printers trims (G3U 0.6/0.8 bases and HS bases over-claiming
printers covered by dedicated variants):
- The FFG01 umbrella (~140 presets across many families) is broken up: the
git-verified introducing family (Flashforge Generic PLA) keeps FFG01, and
83 other families get fresh deterministic mints; the GFB99/GFG99/GFL99
G3U-era block is resolved the same way.
- Flashforge-branded presets riding OrcaFilamentLibrary generic ids
(OGFB99/OGFG99/OGFL98/OGFL99/OGFN96/OGFN98/OGFS98/OGFS99/OGFU99) get their
own family mints; true generic tunings (Generic PLA / PLA Silk / BVOH)
keep the library id with the library base name (alias-shadow-consistent).
- Layout deviation, signed off: minted ids are declared as own keys on every
instantiated member instead of new @base roots, because these families
inherit up to six heterogeneous per-era umbrella parents and
config-preserving roots would add ~80 artificial files. The snapshot
ledger records the resulting instantiated_with_id/id_overrides growth,
which is exactly the ratchet mechanism for keeping such shapes visible.
Verified: config-equivalence gate zero unexpected diffs; extra check exit 0;
--check exit 0; validator -l 2 exit 0; extended -f -v Flashforge exit 0
(was 69 groups + 9 library-cross).
* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
The `@FF AD5M 0.25 nozzle` filament variants carried the base profile's
full printer list (AD5M/AD5M Pro/AD5X 0.4/0.6/0.8) instead of the 0.25
nozzle printers. Combined with base profiles that also listed the AD5X
0.4/0.6/0.8 printers already covered by dedicated `@FF AD5X` variants,
multiple presets with the same alias became compatible with the same
printer. The filament combobox keys presets by full name but displays
them by alias, so these surfaced as duplicate entries (e.g. "Flashforge
PLA Silk", "Flashforge ASA Basic" shown twice).
Fix the `compatible_printers` lists (data only, no settings changed):
- Repoint the 15 `@FF AD5M 0.25 nozzle` variants to the actual 0.25
nozzle printers (Adventurer 5M 0.25 + Adventurer 5M Pro 0.25).
- Remove the redundant AD5X 0.4/0.6/0.8 entries from the base profiles
where dedicated AD5X variants already exist.
- Bump Flashforge profile version to 02.04.00.02.
Each affected filament now resolves to exactly one preset per printer,
and the previously uncovered AD5M 0.25 nozzle printers gain coverage.
Several Artillery and Flashforge machine profiles set the first-layer nozzle temperature with M104 (set, no wait) immediately before the purge/prime line. The purge then runs before the nozzle reaches temperature, so filament is extruded through a nozzle that is not yet hot enough to melt it. Changed M104 to M109 so the printer waits for the target temperature before purging.
Affected profiles:
- Artillery Sidewinder X3 Plus / X3 Pro / X4 Plus / X4 Pro (0.4 nozzle)
- Flashforge AD5X (0.25/0.4/0.6/0.8)
- Flashforge Adventurer 5M / 5M Pro (0.25/0.8 overrides + shared fdm_adventurer5m_common, which also covers the 0.4/0.6 variants via inheritance)
Refs #4337
* feat: add support for 3MF file format in printer configurations and export options
* fix file extension
* enable 3mf for X Max 4
* disable use_3mf for X Plus 4
* Fixed an issue where `label_object_enabled` was not properly propagated to 3mf
* enable exclude object for Max 4
* remove hardcoded use 3mf for flashforge, move them to the new printer profiles config
* Support 'Default' filament option (index 0)
Treat filament index 0 as the new "Default" (use active object/part filament) instead of using 1. Update config defaults and tooltips for wall/sparse/solid infill filament options (min/default -> 0, tooltip explains "Default"). Adjust normalization and propagation logic to respect explicit feature overrides and only apply base extruder when feature values are zero; only copy sparse->solid infill when sparse > 0. Introduce FeatureFilamentOverrideMask and clamp_feature_filament_to_valid to resolve and clamp feature filaments. Update UI lists and selection behavior to expose a "Default" entry and handle zero-based indices in PartPlate and Plater.
* enable_filament_for_features option
Co-Authored-By: LixNix <105106115+lixnix@users.noreply.github.com>
* \n
* Allow wipe_tower_filament to equal nozzle count
Relax the assertion in Print::extruders to permit wipe_tower_filament == config().nozzle_diameter.size(). The configuration value is 1-based and the code subtracts 1 when pushing the extruder index, so equality should be valid and selecting the last nozzle should not trigger an assertion.
* Revert "Allow wipe_tower_filament to equal nozzle count"
This reverts commit 2c976574327a8bcdc74a1b296bf1aaff7752a94e.
* Revert "enable_filament_for_features option"
This reverts commit 01c13baeddb8e26793f752deab788ee4d086975b.
* Migrate legacy feature filament defaults
Add migration logic to convert legacy feature filament selections from 1 to 0 for older 3mf files. Introduces a local migrate_legacy_feature_filament_defaults lambda in src/OrcaSlicer.cpp and src/slic3r/GUI/Plater.cpp that scans keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) on configs/objects/volumes, updates values, counts conversions and logs the result. Also adds a Semver check for "2.4.0-dev" in OrcaSlicer to trigger the migration for files older than that version. This preserves expected default filament selections when loading older project files.
* Update OrcaSlicer.cpp
* Extract migration helper to ConfigMigrations
Centralize legacy feature-filament default migration by moving the duplicated lambda into ConfigMigrations::migrate_legacy_feature_filament_defaults (src/libslic3r/Config.cpp) and declaring it in Config.hpp. Update OrcaSlicer.cpp and slic3r/GUI/Plater.cpp to call the new function instead of inline lambdas. The helper converts specific feature filament keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) from int 1 to 0 and returns the count of conversions to avoid duplicated migration logic.
* Remove DynamicFilamentList1Based and consolidate lists
Delete the specialized DynamicFilamentList1Based struct and its global instance. Update Choice registrations to use the single dynamic_filament_list for wall, sparse_infill and solid_infill filaments, and remove the extra update call for the removed instance. This consolidates filament choice handling and removes duplicated logic in Plater.cpp.
* move it
* fix objects
* Update Config.hpp
* Update profiles
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
* Update 0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle.json
Change filename_format to include material and print time
* Update filename format in Flashforge profile
* Update 0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle.json
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Update filename format in Flashforge profile
* Change ironing angle setting to be an offset angle from the top surface angle rather offset from the layer 0 angle that changes on each layer.
* Change Ironing angle offset range from [-1,359] to [0,359].
-1 is redundant because it is the same behavior as 0 offset.
* Change ironing_angle new default value to 0.
* Update existing print profiles' hardcoded ironing_angles from -1 to 0 to reflect new default value.
* Add migration for old -1 ironing_angle settings. Remove logic for -1 ironing_angle.
* Add u8 prefix for degree symbol string
* Use solid_infill_direction instead of infill_direction for top surface infill direction. Use calculate_infill_rotation_angle to add offset to solid_infill_rotate_template if used.
* Update quality settings wiki for Ironing
* Set f->is_using_template_angle when making ironing filler objects
* Update quality_settings_ironing link from #angle to #angle-offset
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Revert "fix more Flashforge issues"
This reverts commit 6e473fd5fa.
* Revert "Fixed an issue that some Flashforge filament profiles don't' have compatible_printers defined which cause filament selection dialog didn't filter properly"
This reverts commit f8c0cdfb11.
* Revert "Merged Orca-Flashforge 1.3 branch (Added AD5X & G4P) + fixes & optimizations (#8461)"
This reverts commit b8e4ce75e0, reversing
changes made to be8bf54884.
* Flashforge-06-12: gcode and filament mapping
* 06-27 Add Chuanying x1 printer profiles
* 20240702-Flashforge Guider 2s process fix
* [07-10 Flashforge]: Add more layer height options for AD5M and more nozzles for G3U etc.
