* Fix internal bridges over Hilbert Curve/Octagram Spiral sparse infill
For patterns with curved/turning anchor lines (Hilbert Curve, Octagram
Spiral), the bridge_over_infill algorithm produced incorrect results:
1. determine_bridging_angle: sampling curved anchor orientations
produced noise across all turning directions (0/90/180/270°)
instead of a single dominant one, yielding unstable bridge angles
with 180° spread. Fix: use the configured infill_direction + 90°
directly, bypassing the noisy sampling. The old blind +0.25*PI
(Hilbert) and +1/16*PI (Octagram) offsets are removed.
2. construct_anchored_polygon: curved Hilbert/Octagram anchors
intersected each vertical scan line many times at wildly different
Y positions, producing chaotic polygon sections — holes in random
places, bridges over air, rotated bridges. Fix: replace the curved
infill polylines with synthetic straight lines parallel to
infill_direction, spaced at the real infill line spacing
(flow_spacing / density). Lines are centered on the limiting_area
bbox center so that after rotation they span the full bridged_area.
Anchors are left at full bbox length (not clipped) to guarantee
every scan line finds an anchor.
Rectilinear and other straight-line patterns are unaffected.
Known limitation: some bridge edges may still terminate over air in
edge cases where the nearest synthetic anchor line is more than one
infill spacing away from the bridge boundary. This will be addressed
in a follow-up.
* fix: anchor internal bridges to actual sparse infill
Preserve real anchors across regions and align plane-path anchor origins with printed infill. Respect lower-layer rotation templates and model alignment, and sample curved bridge boundaries more finely.
Add regression coverage for anchor alignment, bridge angles and region isolation, with Orca comments explaining the geometry constraints. Verified 175 FFF tests before the comment-only follow-up; preserve CRLF in modified files.
* Fix internal bridge support contacts and separated infill origins
Restore anchor contact after bridge smoothing and share per-body pattern origins between anchors and printed infill. Recompute origins when preparation settings change.
Cover multiline counts 1, 2 and 3 and add regressions for printed bridge support, separated infill alignment and reslicing.
* Add explicit standard headers to PrintObject tests
* test: cover surface centering when infill settings change
Verify top and bottom Archimedean Chords and Octagram Spiral paths after switching centering modes or toggling separated infills. Compare reslicing against fresh slicing and document dependent infill invalidation.
* test: preserve directional surface infill when settings change
* perf: index layer islands for connected-body detection
* test: use public print pipeline for body centering checks
* fix: initialize Print::m_isBBLPrinter
Built outside the GUI/CLI (headless tests, embedded use) the member was read
uninitialized: is_BBL_printer()/wipe_tower_type() feed it into ToolOrdering,
which then non-deterministically dropped per-feature filament assignments.
Default it to false, the value the GUI and CLI already assign for non-Bambu
printers.
* docs(test): add the fff_print testing contract
tests/fff_print/README.md codifies how the suite is organized: one file per
subsystem (each owning both in-memory and emitted-G-code assertions), flat
behavioral test names with a single [Subsystem] tag, a robust-tests guide,
the shared helpers, and an add-a-test checklist. Linked from tests/CLAUDE.md.
* test(fff_print): reorganize the suite to the contract and add coverage
Bring every subsystem into one file per the README: rename the test_data
harness to test_helpers; consolidate skirt/brim; split multi-filament and
cooling into their own files; disperse the test_printgcode grab-bag and the
end-to-end smoke scenario into focused tests; fold test_gcode into
test_gcodewriter. Standardize names and tags, align cube tests on the cube()
helper, and de-qualify the flagship files.
New coverage: multi-filament per-feature and per-object routing; a skirt/brim
behavior matrix (the #14333 rework, including brim ears, with regression
coverage for #14319 and #14366); resolved extrusion-width and config
comments; custom-G-code placeholders; fan control and speed-marker
consumption.
Re-enable three slice tests previously tagged [NotWorking]: the clipper
"Coordinate outside allowed range" error that disabled them was specific to a
past CI runner environment and no longer reproduces.
* test(fff_print): tag arm64-flaky skirt/brim tests NotWorking
Four skirt/brim slice tests intermittently throw ClipperLib's "Coordinate
outside allowed range" on the macOS and Windows arm64 CI toolchains (an FP
divergence, not a slicing bug; see PR #14207). Linux x86_64 and aarch64 are
unaffected. Tag them [NotWorking] so ctest -LE NotWorking skips them.
* test(fff_print): re-enable the arm64 skirt/brim tests
These were tagged [NotWorking] as a stopgap when myfork's daily-driver build
combined them with the cross-platform CI on a base that predated upstream's
m_origin fix (99dea01cc3). With upstream merged in, Print::m_origin is
initialized and the "Coordinate outside allowed range" throw is gone, so the
tests pass on macOS/Windows arm64. Drop the tags.
* Get libslic3r tests closer to passing
I can't get geometry tests to do anything useful. I've added extra
output, but it hasn't helped me figure out why they don't work
yet. That's also probably the last broken 3mf test doesn't work.
The config tests were mostly broken because of config name changes.
The placeholder_parser tests have some things that may-or-may-not
still apply to Orca.
* Vendor a 3.x version of Catch2
Everything is surely broken at this point.
* Allow building tests separately from Orca with build_linux.sh
* Remove unnecessary log message screwing up ctest
Same solution as Prusaslicer
* Make 2 TriangleMesh methods const
Since they can be.
* Move method comment to the header where it belongsc
* Add indirectly-included header directly
Transform3d IIRC
* libslic3r tests converted to Catch2 v3
Still has 3 failing tests, but builds and runs.
* Disable 2D convex hull test and comment what I've learned
Not sure the best way to solve this yet.
* Add diff compare method for DynamicConfig
Help the unit test report errors better.
* Perl no longer used, remove comment line
* Clang-format Config.?pp
So difficult to work with ATM
* Remove cpp17 unit tests
Who gives a shit
* Don't need explicit "example" test
We have lots of tests to serve as examples.
* Leave breadcrumb to enable sla_print tests
* Fix serialization of DynamicConfig
Add comments to test, because these code paths might not be even used
anymore.
* Update run_unit_tests to run all the tests
By the time I'm done with the PR all tests will either excluded by
default or passing, so just do all.
* Update how-to-test now that build_linux.sh builds tests separately
* Update cmake regenerate instructions
Read this online; hopefully works.
* Enable slic3rutils test with Catch2 v3
* Port libnest2d and fff_print to Catch2 v3
They build. Many failing.
* Add slightly more info to Objects not fit on bed exception
* Disable failing fff_print tests from running
They're mostly failing for "objects don't fit on bed" for an
infinite-sized bed. Given infinite bed is probably only used in tests,
it probably was incidentally broken long ago.
* Must checkout tests directory in GH Actions
So we get the test data
* Missed a failing fff_print test
* Disable (most/all) broken libnest2d tests
Trying all, not checking yet though
* Fix Polygon convex/concave detection tests
Document the implementation too. Reorganize the tests to be cleaner.
* Update the test script to run tests in parallel
* Get sla_print tests to build
Probably not passing
* Don't cause full project rebuild when updating test CMakeLists.txts
* Revert "Clang-format Config.?pp"
This reverts commit 771e4c0ad2.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Valerii Bokhan