and use bridge flow for nozzlechange
jira: none
Change-Id: I9bda1b689d7139819607bace09354ef43d27a970
(cherry picked from commit 147e7bdb50765143074dd8111c24f8c1b61872dc)
and resolve the infinite loop during multiple material changes when printing TPU.
jira: none
Change-Id: I9d0fb142ced6ba894803fd4c9b9b665e2fa93d92
(cherry picked from commit aad1ab2090781e072053dfe16764a3e05bb57178)
and fix conflict checking when the wipe tower's brim fully encloses the model
jira: STUDIO-10237, STUDIO-10296
Change-Id: I6e2a6640c06ddb6b3af700c9048fa26434411631
(cherry picked from commit b36c41e5146168325d8b7ec966eb97f1062442a7)
1.Support auto flush when change printer and nozzle volume type
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9dfc2fff095bbf1901afe99556d1e57aa225f482
(cherry picked from commit f12305832227940eb0eae05817ad046dd4eff02d)
and fix the nozzlechange's error cleanbox.
and fix some error in interface's nozzlechangle and toolchange.
jira: none
Change-Id: I2fd5c68d90506fcb8f01f09a8246dfb5838baef4
(cherry picked from commit 6c5b63db246a1f42e34225c5561fb8b0975da53b)
and reduce the toolchange speed if it occurs at the contact surface
jira: none
Change-Id: Ic238671366145bc7bff76d18d20c104a201a1f17
(cherry picked from commit fb9f9f41e618c5064032b85351363029307e209c)
when switch printer, we found some filament preset not visible
and we need to allow it to be selected
jira: STUDIO-9979
Change-Id: I9613747a755f449c2f48563082b6893e426f37ea
(cherry picked from commit bc5514bbabbbaddefb33ade556a0f15c051aed7e)
1. Try to merge filaments before grouping
2. Set max match num for machine filamnet in match mode
jira:STUDIO-10392
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2451d838e07ee02f493fda4dc702f3d13b2ad37b
(cherry picked from commit d15fc37ff2fa048e38a0b132bb3ae525ff666fab)
and set the contact surfaces of different material types as solid,
and reduce the nozzlechange speed if it occurs at the contact surface,
and recuce the toolchange speed if it occurs at the contact surface.
jira: none
Change-Id: I884d60f4114544dfa959bd654ecc985f5fb9aac4
(cherry picked from commit ed7bfd3ff6732efe6c7e9eb96901be1db00bb3d0)
1. the nozzle change gcode use double perimeter width
2. fix the error layer height for adaptive layer height
3. limit the nozzle change speed to 50 when a bridge is detected
4. fix the error extrusion flow for filament change gcode when a bridge is detected
jira: STUDIO-10269
Change-Id: I580c618555fe19d000a56e2510a42004722c1b8b
(cherry picked from commit 5c56b43166ab32b09da31b7046efbbcbe3cbc9c8)
1. Add filament_is_support field. Format the filament type
2. Optimize machine filament info logic
jira:STUDIO-10326
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia8bfc37095339e73c98209b4e3f1e0804e511e88
(cherry picked from commit 001144400b841629439a890d46fa40a7296689ba)
of the wipe tower's outer wall to use the actual outer wall path.
jira: none
Change-Id: Ib45ecbc328c88c1abe6d9e8567f715331a3ddd37
(cherry picked from commit 0a20f1fe6d6d63cdcb13bc19fd9ae553f45b6f59)
and fix wipe error when enable timelapse and in single color
and set rib wall as default
jira: none
Change-Id: Ic365bb7ee0ee6715c9d4f4f00b4bca9fd472c61a
(cherry picked from commit 89b59f1c41e0f360457622438a09237bfa1eaa18)
1.Caused by too big tolerance
jira:STUDIO-10236
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0ba182991bc70ca2d3a34a85b87fa7539c5e50d9
(cherry picked from commit d2ae5ea32c55c0023b27fac73a7479c2bd9a7e1c)
and reduce the travel speed inside the wipe_tower
jira: none
Change-Id: I3b07ee62623e0cdc2f1824f0011f95776020bee1
(cherry picked from commit 1aad582e08229fad1f935e257c1335dcfdbe406c)
2. use most used extruder for timelapse without wipe tower
3. apply retract_when_changing_layer for multi_extruder
jira: none
Change-Id: I4ff00573fd8a6ee9fa42877e3e7056d547e4d864
(cherry picked from commit 4715fa14edf2bdfc1170b0461da699903a3078a4)
