* Add orca-translations Claude skill and PO tool
Add a .claude skill that guides translation passes over the localization/i18n gettext catalogs. It covers the workflow: run gettext, settle new glossary terms, translate in batches, verify, and report.
Includes translation-rules.md, which condenses the placeholder, line-break and glossary rules plus the guidance on review notes.
Also adds scripts/po_tool.py (standard library only). It lists pending entries with glossary hints, validates and applies translations, adding '# AI Translated' and '# Needs human review' comments, and rewrites only the entries it changes. It can also check catalogs, look up existing translations, suggest glossary candidates and update the wiki glossary TSV.
* Let po_tool apply translations by entry id
pending now gives each entry a short id, so a translation file can name
entries by id instead of repeating the English msgid. apply accepts either.
A "review": "" item clears an earlier review note when overwriting an
entry, and check gives each msgfmt run its own temporary output file so
parallel checks do not collide.
* Fill all empty translations
Regenerate the template with run_gettext --full and translate every empty
entry in the 22 catalogs (7,089 entries) with the orca-translations skill,
following the localization glossary, including the new belt printer,
IDEX/IQEX and plugin terms. Every new entry is marked "# AI Translated";
122 also carry "# Needs human review" with what to check.
* Show entry ids in po_tool lookup and search translations
lookup now prints each entry's id, so an entry found there can be
rewritten with apply --overwrite without repeating the English, and
--msgstr searches the translations instead of the msgids, which finds
every entry that still uses a term being changed.
SKILL.md describes how to change an established term: check the
catalog's usage first, update the glossary cell, then rewrite only the
entries where the term has that meaning.
* Fix mistranslated terms and align catalogs with the glossary
Correct labels that the glossary had copied, and the entries that used
them:
- ca: Raft was rendered as the Brim term; it is now "Rai". Exhaust fan,
Monotonic line, Unretract, Slice, Lateral Honeycomb and PA Tower
labels fixed.
- cs: Lightning infill is "Blesk", not "Osvětlení" (illumination).
- sv: Retraction is "Retraktion", not "Reduktion"; Unretract,
Lagerhöjd, Delkylningsfläkt, Utsugsfläkt, Aligned Rectilinear and the
Preset label fixed.
- de: Brim is "Rand" and Skirt is "Umrandung", as most entries already
had them.
- lt: brim entries used the Skirt word "apvadas"; they now use "kraštas".
- es: Sparse infill is "relleno de baja densidad", the catalog majority.
- eu: nozzle wipe is "garbiketa", not purge.
- th: the project plate is "เพลต", distinct from the bed.
- uk: Quarter Cubic, Latin "PA" in PA Tower, and Belt purge tower.
- pl: Cross Hatch, Tri-hexagon, Volumetric speed and Raft labels.
- zh_TW: Brim stays "Brim", as the existing labels have it.
- tr: "Prime Tower" read "Prime Minister Tower".
- ko: the plugin "Capabilities" label read "performance".
- Build Volume labels fixed in tr, de, cs and eu.
All 242 rewritten entries are marked "# AI Translated".
* Make more UI text translatable and fix pluralization and context
Audit the sources for text that translators could not translate
correctly and fix it.
Mark text that reached users in English only: IDEX/IQEX role names,
plugin permission prompts and errors, 3MF/preset loading errors, G-code
placeholder parser errors, calibration and device messages, notification
texts, file dialog filters, and the config validation messages.
Replace sentences built from translated fragments, such as the prime
tower warnings, "left"/"right" nozzle names, and "Filament " + number,
with single msgids that have placeholders, so translators can reorder
and inflect them.
Use plural forms for texts with a count ("%1% mixed filaments",
"%d objects", "%1% triangles") instead of "(s)" and mismatched verbs.
Fix the swapped singular/plural pair in "The following presets inherit
this preset".
Add translation contexts where one English word has several meanings
(Subscribed/Local, Standard, Pause, View, Step, Model, Camera, Flow,
Filter, Others, Prepare, the Design tools). Show "Size" instead of
"Build Volume" in the Cut tool, which displays the object size.
Fix code that compared translated text with English (the Edit G-code
dialog group, the plugin registration failure check), and add the
bundled web pages' missing string-table entries. Use the single
character for degrees Celsius, say "G-code", and describe the head
filament map without internal jargon.
Install the libslic3r translate callback before the presets load, so
their load errors are translated, and list the 28 source files that had
marked strings but were never extracted into localization/i18n/list.txt.
* Suggest earlier translations and list fuzzy entries in po_tool pending
pending now attaches the closest earlier translation of a similar
English text (from obsolete or translated entries), so a reworded or
split string keeps its wording, and it lists fuzzy entries by default,
since users never see them. A fuzzy entry also carries its stale
translation as previous_translation.
* Fix wording of the non-boolean operands error
The logical operation error said "operators" where it means the
operands the operation was applied to.
* Translate the newly translatable strings in all languages
Regenerate the template after the translatability changes and fill every
new or changed entry in the 22 catalogs (about 12,800 entries): the
strings that became translatable, the plural forms, the entries split by
context, and the previously fuzzy singular entries that became plurals.
Every new entry is marked "# AI Translated", and about 360 also carry a
"# Needs human review" note saying what to check. Terms follow the
localization glossary. Earlier translations of reworded strings were
reused where the meaning was unchanged. Existing entries were not
changed, and obsolete entries are kept.
* Document the source translatability audit in the orca-translations skill
Add a reference describing how strings reach translators, what to look
for (untranslated text, spliced sentences, missing plurals, ambiguous
words), what not to translate, where a context cannot be carried, and
what to do after the edits, plus a scanner that lists untranslated
user-facing string literals.
* Document how to write translatable strings in AGENTS.md
Tell developers to keep each message complete in one msgid: use
placeholders instead of concatenating translated fragments, plural forms
for counts, and contexts for ambiguous words, and to list new source
files in localization/i18n/list.txt. Add a matching code review item.
* Translate the strings added since the rebase
Regenerate the template against the current main and translate the 26
new entries per language: the Fix Model commands and messages, and the
texture displacement image adjustment panel. Each new entry is marked
"# AI Translated"; existing entries are unchanged.
* tidy
46 files include the same header twice at file scope, outside any #if,
66 times in all:
Model.cpp included Model.hpp twice, Utils.hpp <algorithm> and
<string_view> twice, seven GUI headers <wx/dataview.h> and
<wx/artprov.h> twice. The second include of each is removed.
GCodeSender.cpp and GCodeSender.hpp have been commented out of
libslic3r/CMakeLists.txt since 2022 and their only two includes are
commented out as well. Both files go, with the commented lines, and
the CMake entry for SLA/SupportTreeIGL.cpp, a file that no longer
exists.
Each of these headers put a using or namespace alias at global or
namespace scope, which every includer inherited:
- BBLTopbar.hpp: "using namespace Slic3r::GUI;" at global scope, reached
through MainFrame.hpp. Seven source files used GUI names unqualified
outside the namespace because of it, one of them as "::RadioBox".
- IMSlider.hpp and TickCode.hpp: "using namespace CustomGCode;" inside
Slic3r.
- ProjectTask.hpp, Jobs/PrintJob.hpp and ConfigWizard_private.hpp:
"namespace fs = boost::filesystem;". PresetBundle.cpp and GUI_App.cpp
had no alias of their own.
- VoronoiUtils.hpp: "using VD = Slic3r::Geometry::VoronoiDiagram;" at
global scope.
The headers now spell the names out. Source files that used them get
the qualifier, or a using of their own where there are many uses.
* Remove Unused Project Includes and Forward-Declare Where a Type Is Only Referenced
Generated with include-what-you-use and applied conservatively. Only OrcaSlicer's own headers, the ones under src/ and tests/, are removed or forward-declared; standard-library and third-party includes are left alone. An include is removed only when both the Release and the Debug configuration leave it unused, never from inside a conditional block, and never from a file with platform-specific blocks, which only gain includes. Files whose only use of a header sits behind a feature or debug macro (libvgcode's OpenGL ES and marker code, the ARACHNE/TESTS_EXPORT_SVGS debug output) keep their includes.
clonable_ptr.hpp gains #pragma once; it had no include guard and was only safe while Config.hpp was its sole includer.
* Remove Unused Project Includes From Files With Platform-Specific Code
A Linux include-what-you-use run cannot see the code inside _WIN32, __APPLE__ or __linux__ blocks, so its verdict is only taken where nothing the removed header declares, directly or through what it includes, is named inside those blocks. Removals also have to hold in both the Release and Debug configuration and never touch a line inside a conditional block.
* Restore the libslic3r Precompiled Header and Direct Includes Lost in the Platform Pass
The platform-file pass treated pchheader.hpp as an ordinary header and
emptied it, and left GUI_Preview.hpp and 14 other files relying on
headers they no longer reached directly.
* Restore MainFrame.hpp in ParamsDialog.cpp for the Windows-Only Reparent Call
* Include Headers That Files Reached Through Ones the Cleanup Removed
* Drop Includes Duplicated by the Cleanup or by Main's Own Additions
* Leave PreciseSeam.cpp as Main Has It After the Precise Seam Rework
* Add Missing Includes Across src/slic3r/GUI
Every GUI source and header now directly includes the headers declaring what it uses, rather than relying on the precompiled header or transitive includes. Generated with clang-tidy misc-include-cleaner, plus one hand edit making CalibrationPanel.hpp self-contained.
* Drop the OS-Specific Includes Added Outside Their Platform Guards
GLib, GTK, D-Bus and POSIX headers are only used inside platform #if blocks, which already include them. Added unconditionally at the top of the file they broke the Windows build.
* Add the clang-tidy Configuration That Generated These Includes
Only misc-include-cleaner's missing-include check, with the headers it must never suggest: per-platform, internal and OS-specific ones that would break other platforms or are not meant to be included directly.
* Match Windows Paths in the clang-tidy Ignore List
Header paths use backslashes on Windows, so every / in a pattern is now [/\\]. The Windows SDK headers are ignored alongside the other OS-specific ones, and the list is one pattern per line. Suggested by @raistlin7447 from a Windows clang-cl run.
* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
Consolidates #13744 (CFS filament sync) into this PR per maintainer
request and resyncs with main. Conflicts resolved:
* src/slic3r/GUI/Plater.cpp -- parallel else-if added by both sides
(htCrealityPrint + flashforge_local_api branches); kept both.
* src/slic3r/GUI/PhysicalPrinterDialog.cpp -- both sides added a
host-specific Browse dialog (Creality DNS-SD + Flashforge); kept
both as early-return branches, fall through to BonjourDialog.
* src/slic3r/GUI/PrintHostDialogs.hpp -- parallel class declarations
(CrealityPrintHostSendDialog + FlashforgePrintHostSendDialog);
kept both.
* Add Flashforge AD5X local send dialog, IFS mapping, and LAN discovery
* Refine Flashforge AD5X IFS dialog behavior
* Refine Flashforge IFS slot selection dialog
* Fix Flashforge printer selection and print mapping
* Use 3MF for Flashforge local uploads
* Generalize Flashforge local API handling
* Handle Flashforge local API IFS support more robustly
* Use selected plate filament info for Flashforge IFS mapping
* Fix Flashforge current-plate mapping and widget sizing
* Improve Flashforge IFS contrast and color matching
* Fix Flashforge legacy plate export and upload naming
Resolve PLATE_CURRENT_IDX before the legacy send-to-printhost path calls send_gcode so single-plate Flashforge 3MF exports target the selected plate instead of leaking the sentinel into export_3mf.
Sanitize Flashforge upload names in one shared utility reused by both the dialog and the backend client. This keeps the UI-visible filename and the actual uploaded filename consistent and replaces printer-problematic characters such as '=' without scattering Flashforge-specific logic through the generic Plater flow.
* Keep Flashforge upload filename sanitization in the backend only
Drop the PrintHostSendDialog API changes and keep filename sanitization inside the Flashforge backend paths that actually talk to the printer. This keeps the generic send dialog flow untouched while still normalizing problematic upload names for both serial and local API uploads.
* Only use the Flashforge IFS dialog for local API uploads
* Use reported Flashforge IFS support without model fallback
* Remove unused Flashforge slot uniqueness tracking
* Include <array> for Flashforge discovery message
Show the spool holder (external filament roll) as a selectable option
in the K2 Plus filament mapping dialog. Previously only CFS slots were
shown because the box state filter excluded the spool holder.
- Only skip inactive CFS boxes (type 0, state != 1); spool holder
(type 1) is always available
- Label spool holder slots as "Ext - {type}" in the dropdown
- Auto-match priority is now:
1. CFS exact (type + color)
2. CFS type-only
3. Ext exact (type + color)
4. Ext type-only
5. Positional default
- When Ext is selected (by user or auto-match), disable other combos
since firmware does not support mixing CFS and spool holder
Signed-off-by: Igor Mammedov <niallain@gmail.com>
When the filament mapping dialog opens, automatically select the best
matching CFS slot for each gcode filament by comparing color and type.
Falls back to positional index if no exact match is found.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Query CFS material slots and show colored dropdowns to map gcode
filaments to physical printer slots. Color mapping is passed through
extended_info as colorMatch entries for the multi-color print protocol.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
---
v4:
- Use gcode tool index (T1A, T1B, ...) as colorMatch id instead of
CFS slot tool_id — firmware expects the gcode filament identifier,
not the destination slot
Add enableSelfTest checkbox to CrealityPrintHostSendDialog that
persists across sessions via AppConfig. The checkbox state is
passed to the upload via extendedInfo().
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Add model_name() to map firmware model codes (F008, F012, F021)
to human-readable names (K2 Plus, K2 Pro, K2). Update the send
dialog init() to detect multi-color support and show a group box
with the printer name.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Add CrealityPrintHostSendDialog scaffolding: an empty dialog class
that inherits from PrintHostSendDialog, and Plater wiring to use
it when the host type is CrealityPrint.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* Support file uploads and the device details page for CC2 printers.
* Resolved build issues for Linux and macOS.
* 1. Added `ElegooPrinterWebViewHandler` to handle WebUI messages for Elegoo printers. Other printers will keep the current behavior.
2. Added a static `get_print_host_webui` method in `PrintHost` to retrieve the printer WebUI URL.
* Improved timeout handling for CC2 file upload and SN info APIs.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Added Elegoolink connection
* Set Elegoo CC default bed to btPTE
* Friendly output of some error codes of PrintHost
* feat: Add elegoo centauri carbon profile
* fix: Fix the issue where the bed type in the printer configuration does not match the bed temperature settings when multiple bed types are not supported.
* feat: Modify the elegoo process parameters to disable slowdown_for_curled_perimeters.
* feat: Update comment to clarify plate visibility for multi bed support, BBL printer, and selected bed type.
* fix: Optimize ElegooLink upload; The code is clearer than before.
* feat: Format the ElegooPrintHostSendDialog code.
* fix: Remove the unnecessary instantiation attribute in the Elegoo process.
* fix: Flatpak compilation failed
---------
Co-authored-by: anjis <anjis.zhou@elegoo.com>
* Allow using BBL's device tab when 3rd party print host is used
* Add option to open SimplyPrint panel in device tab after uploading
* Fix default print host for prusa connect
* Do not set api key in device view when SimplyPrint is used
* Sending 3mf file to SimplyPrint when using BBL printers
* Fix file extension when uploading 3mf
* Prepare for large file uploading
* Implement chunk upload
* Fix file uploading exceeding content size
* Fix wrong field type
* Add `temp=true` to all chunk upload calls
* Add macro to enable test api
* Merge branch 'main' into dev/simplyprint-improve
* Fix another missing `temp=true`
* Add delete token
* Try fixing build error on *nix systems
* Merge branch 'main' into dev/simplyprint-improve
* Merge branch 'main' into dev/simplyprint-improve
* Merge remote-tracking branch 'remote/main' into dev/simplyprint-improve
# Conflicts:
# src/slic3r/GUI/BackgroundSlicingProcess.cpp
* Move the `bbl_use_print_host_webui` option to print host dialog. Also make it a derived option of `print_host_webui` instead.
* Merge branch 'main' into dev/simplyprint-improve
# Conflicts:
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/Plater.cpp
* Merge branch 'main' into dev/simplyprint-improve
# Conflicts:
# src/slic3r/GUI/Plater.cpp
* Use a more generic option instead of SimplyPrint specific
* Merge branch 'main' into dev/simplyprint-improve
* Merge branch 'main' into dev/simplyprint-improve
PrusaLink: Use PUT or POST based on information read during test connection (upload-by-put). If put - do additional GET for storage_list and let user to choose where to upload or show name if only 1 is possible. Allow PrusaLink for MK2.5 and MK2.5S.
PrusaConnect: New host type PrusaConnect inherited from PrusaLink class with filled host address, disabled http diggest. After upload read header information - status message and pass it to notification and Printhost upload dialog via events, this message can be shown as warning notification and is recieved in localized lang. Pass accept-language shortcut in upload header. 3 option to upload. (upload, to queue, to print)
Upload Notification: Showing status text, changes in text, not showing close button, Completed state on special call (not 100%) and other design changes.
Right panel: Open URL button.
Thanks SoftForever for your works to support
sending a gcode file to third-party printer
Change-Id: I3cba43c8bd878f1f1c2fd5fae202ed4d922e8727
Signed-off-by: Stone Li <stone.li@bambulab.com>
* wip
* fix cmake warning
* add UI and config options for Moonraker connection
* wip: copy whole print host UI from PS
* add more needed options
* wip 2
* fix string issue on Mac
* wip3
* fix cmake warning
* working
need tweaks
* cleanup
* support thumbnail
* fix DNS resolving issue in Windows
* code clean up
Ian Bassi