The sidebar Mixed Filament list, the extruder icons, the color painting
gizmo and the canvas filament bar now show the same bottom-to-top fade the
Edit Mixed Filament preview shows, custom gradient curves included, instead
of a horizontal fade between the two component colours. Ordinary and vendor
multi-colour filaments are drawn exactly as before.
Per material slot, the Publish dialog can now embed the entire filament preset ("Full Publish") and require a curated filament type and/or colour:
- On export, full-publish vector options are masked to the author's slot so unrelated slot data never leaks into the published file.
- On load, slots are matched by the published type: a match keeps the receiver's material (full dumps ignored, partial keys applied); a mismatch replaces the slot with the first visible same-type library filament, falling back to a temporary embedded preset or skipped keys when none exists. Required colours apply regardless of the type match.
- The receiver's slot count grows only to the highest published slot.
- Published 3MFs load as a new project: the file's path is not adopted as the project filename, published metadata is stripped from the model, and the file is added to recent projects.
- Notifications list replaced slots, and the edited filament preset is refreshed so applied values surface in the GUI.
- Dialog: "Full Publish" toggle replaces the material opt-in and select-all headers; new Color/Type requirement rows with swatches.
- Add Ctrl+Shift+E shortcut for the Publish dialog (menu, key handling, and the keyboard shortcuts dialog).
- Tests for export slot masking, metadata round-trip, replacement semantics, slot growth, and skipped-key reporting.
reslice() now enforces only the missing-plugin block via
refresh_missing_plugin_block (no second Print::validate); plate
ready-status returns to upstream's plain model_fits, matching
GLCanvas3D::reload_scene. Also restores main's use_bbl_device_tab and
the check_track_enable comment, and drops two unused MainFrame includes.
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
- FilamentMapDialog's manual page understands volume types: a mixed
(Hybrid) extruder shows separate Standard / High Flow drop zones
with live sub-nozzle counts, a validation timer with an inline
error + "set nozzle count" suggestion, and composes a per-filament
volume map on OK (persisted to the plate or globally)
- switching an extruder's Flow type rewrites the affected plate map
entries; plate maps stay sized across filament add/delete/count
changes (values keep their filament, no index shift)
- CLI: manual mapping on multi-nozzle printers synthesizes the volume
map from extruder flow types when absent; nozzle-manual mode
requires explicit maps; computed maps land on the plate so exported
projects carry filament_volume_maps
- filament_nozzle_map joins the project options (selection seeding +
filament-count resizing)
- pot entries for the new dialog strings
All 19 reference fixtures byte-identical; slicing an exported Hybrid
project reproduces its g-code byte-for-byte with the volume map
round-tripped through model_settings.config.
The sidebar extruder cards get an interactive title row — "<name> ( <count> )"
with an edit button — showing the extruder's physical nozzle count on
multi-nozzle printers (hidden elsewhere). Clicking it opens the existing
"Set nozzle count" dialog, which now also handles a Hybrid extruder by
offering both Standard and High Flow counts (an empty mix is rejected) and
shows a hotend thumbnail.
Because `extruder_nozzle_stats` is session-only (saved presets never carry
it, so preset switches rebuild the edited config without it), the stats are
re-baselined whenever they are missing: each extruder starts with
extruder_max_nozzle_count nozzles of its selected volume type. Switching an
extruder's flow type carries its total count over to the new type, except
when the stats came from a device sync — the machine-reported per-type
breakdown must survive a manual flow switch.
The badge refreshes on preset load, flow-type change, manual edit, device
sync, and project load. Single-extruder cards keep the title row but never
enable editing.
The engine already implements prime_volume_mode (Default/Saving/Fast)
but nothing in the UI could set it, leaving prime-saving unreachable on
multi-sub-nozzle extruders and fast purge unreachable on printers that
support it.
- new PurgeModeDialog with selectable Standard/Fast or
Standard/Prime Saving cards depending on printer capability
- "Purge mode" sidebar button next to Flushing volumes; opens the
dialog and stores the choice in the project config
- printer preset-load gating: button shown only when the printer has
multiple sub-nozzles per extruder or sets support_fast_purge_mode;
stale project values the printer cannot honor reset to Default
- enable fast purge on A2L 0.4 (support_fast_purge_mode), explicit
default 0 in the common machine base
- new dialog strings added to OrcaSlicer.pot
Printers without these capabilities never show the button and their
projects keep prime_volume_mode at Default, so slicing output is
unchanged.
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
Multi-nozzle sync widget, AMS rack-nozzle mapping popup, calibration rework, send-dialog nozzle mapping and extruder-count UI. Includes the fix to persist the AMS sync badge on filament cards (H2C/A2L and direct-sync printers).
* feat: add support for 3MF file format in printer configurations and export options
* fix file extension
* enable 3mf for X Max 4
* disable use_3mf for X Plus 4
* Fixed an issue where `label_object_enabled` was not properly propagated to 3mf
* enable exclude object for Max 4
* remove hardcoded use 3mf for flashforge, move them to the new printer profiles config
* feat: Add flow rate calibration pattern selector dialog
* feat: Integrate PR #11881 and improve Flow Rate Calibration Wizard
- Integrated PR #11881: Display layer duration in G-code viewer position window.
- Enhanced Flow Rate Calibration:
- Implemented a Wizard dialog (FlowRateCalibrationDialog) using DPIDialog for Dark Mode support.
- Restricted pattern selection to 'Archimedean Chords' and 'Monotonic'.
- Integrated logic to pass the selected pattern to the calibration generation.
* fix(UI): Refactor FlowRateCalibrationDialog to calib_dlg for macOS build fix and UI consistency
Moved FlowRateCalibrationDialog from MainFrame.cpp to calib_dlg.hpp/.cpp to resolve build errors on macOS. Updated UI to match Pressure Advance calibration dialog style (Dark Mode support, RadioGroups). Logic moved to dialog class.
* Update Wiki link for flow rate calibration
* ui: replace RadioGroup with BitmapComboBox for Flow Rate pattern selection
* fix(ui): use custom ComboBox widget for Flow Rate Calibration
Replaces wxBitmapComboBox with OrcaSlicer's custom ComboBox widget to fix rendering issues on Windows (empty selection) and compilation errors on Linux.
* Refactor: Cleanup unused includes and members in FlowRate calibration dialog
* Fix: Complete rename of Flow Rate to Flow ratio in calibration menus after merge
* Fix: Update Flow Rate to Flow Ratio in Calibration Dialog and Wiki Link
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* identified code for snapping to buidlplate
* rename internal name to ensure_on_bed to be consistent, saves option in 2mf, finish Move UI, use in both ensure_on_bed() functions
* makes auto_drop a per-object setting, removes global setting
* remove adUndef, add auto_drop to constructor/serialize
* fixes drop() button
* add "auto_drop" checkmark to "load as single object" dialog,
nothing changes if auto_drop == yes || "load as single object",
if auto_drop == false and "load as single object" == false the objects now retain their relative position to each other
* retains auto_drop (and printable) state when assembling or splitting objects,
adds ObjectList::printable_state_changed() overload to be able to only provide ModelObject* vector
* adds dialog when splitting to ask if auto_drop should be disabled,
only shows when auto_drop enabled and atleast one volume floating
* adds arrow indicator on bounding box if auto_drop == false
* removes unneeded code, keeps "auto_drop" naming consistent
* makes for loop simpler in set_printable, set_auto_drop and get_auto_drop,
makes get_auto_drop const,
fixes wording in Snapshot text
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Add read support for Google's Draco (.drc) format.
* Fix build on Linux
* Use boost instead of fstat.
* Switch to boost memory-mapped file to save RAM and potentially improve performance.
* Trim trailing whitespace.
* Initial Draco write support.
Currently always exports with 16-bit precision and speed 0 (best compression).
The back-end function does have arguments to specify them, it's just not hooked into the GUI.
* Add Draco to the About dialogue.
* Fix Linux compile (hopefully)
* Add an option to associate DRC files on Windows.
* Implement a Preferences option to set Draco position quantization bits
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Some slight changes to ianalexis's suggestion.
* Implement a create_item_spinctrl() function for numeric inputs, and use that instead of create_item_input().
* Move "bits" to inside the spinctrl box.
* Refactor following yw4z's feedback
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Change to 0 bits as the default setting for Draco export precision.
* Change to a lossy checkbox and a bits field with a range of 8-30.
* Proper SpinInput code from yw4z
* Revert "Proper SpinInput code from yw4z"
This reverts commit 7e9c85f31a.
* Revert "Change to a lossy checkbox and a bits field with a range of 8-30."
This reverts commit d642c9bcc0.
* Redo preferences based on SoftFever's feedback
* Refactor to minimize code duplication
* Fix padding
* Improve Draco export quality level tooltip clarity
Clarify that 0 means lossless compression (not uncompressed),
document the valid lossy range (8-30), and better explain the
tradeoff between file size and geometric detail.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Add "Replace all from STL" command
this operates on the currently selected plate or on the selection
* Add more translations for "Replace all from STL"
* build fix
* "Replace all with STL" also works with multiple selected plates
* fix build
* replace all from stl: better error handling and a nicer status message box
---------
Co-authored-by: Nils Hasler <hasler@thecaptury.com>
Kris Austin