This new feature allows users to override flow ratios for the following extrusion path types:
* First layer (excluding Brims and Skirts)
* Outer walls
* Inner walls
* Overhang perimeters
* Sparse infill
* Internal solid infill
* Gap fill
* Support
* Support interfaces
* New materials
* Temps
* Full filament type list
* Improve nozzle temperature range validation messages
Separates minimum and maximum recommended temperature warnings for nozzle configuration + generig °c usage.
Co-Authored-By: Alexandre Folle de Menezes <afmenez@gmail.com>
* Material Updates
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* petg-cf10 should be petg-cf
options.
* Pla reduced range
* Adjust some temps
* FilamentTempType Temperature-based logic
* chamber temps
* Fromatting
* Filament chamber temperature range support
Introduces get_filament_chamber_temp_range to retrieve safe chamber temperature limits for filament types. Updates ConfigManipulation to use these limits instead of hardcoded values.
* add adhesion coefficient and yield strength
Replaces hardcoded material checks for adhesion coefficient and yield strength with lookup functions using extended FilamentType struct.
* Thermal length
* Fix
* Refactor filament type data to MaterialType class
Moved filament type properties and related lookup functions from PrintConfig.cpp into a new MaterialType class.
* Fix adhesion_coefficient
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Alexandre Folle de Menezes <afmenez@gmail.com>
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* refactor Infill rotation template
* clean up comments
* set default solid_infill_rotate_template to empty
* Fix an issue that infill_direction solid_infill_direction not working as expected
* update based on feedback
* Feature: Fuzzy Skin Extrusion Mode
This extension allows you to add new features to the fuzzy skin generator.
* Add auto switch to Arachne mode
* Move dialog to `update_print_fff_config` and update how `is_msg_dlg_already_exist` is used
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* SPE-2486: Refactor function apply_mm_segmentation() to prepare support for fuzzy skin painting.
(cherry picked from commit 2c06c81159f7aadd6ac20c7a7583c8f4959a5601)
* SPE-2585: Fix empty layers when multi-material painting and modifiers are used.
(cherry picked from commit 4b3da02ec26d43bfad91897cb34779fb21419e3e)
* Update project structure to match Prusa
* SPE-2486: Add a new gizmo for fuzzy skin painting.
(cherry picked from commit 886faac74ebe6978b828f51be62d26176e2900e5)
* Fix render
* Remove duplicated painting gizmo `render_triangles` code
* SPE-2486: Extend multi-material segmentation to allow segmentation of any painted faces.
(cherry picked from commit 519f5eea8e3be0d7c2cd5d030323ff264727e3d0)
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* SPE-2486: Implement segmentation of layers based on fuzzy skin painting.
(cherry picked from commit 800b742b950438c5ed8323693074b6171300131c)
* SPE-2486: Separate fuzzy skin implementation into the separate file.
(cherry picked from commit efd95c1c66dc09fca7695fb82405056c687c2291)
* Move more fuzzy code to separate file
* Don't hide fuzzy skin option, so it can be applied to paint on fuzzy
* Fix build
* Add option group for fuzzy skin
* Update icon color
* Fix reset painting
* Update UI style
* Store fuzzy painting in bbs_3mf
* Add missing fuzzy paint code
* SPE-2486: Limit the depth of the painted fuzzy skin regions to make regions cover just external perimeters.
This reduces the possibility of artifacts that could happen during regions merging.
(cherry picked from commit fa2663f02647f80b239da4f45d92ef66f5ce048a)
* Update icons
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Make the region compatible check a separate function
* Only warn about multi-material if it's truly multi-perimeters
* Improve gizmo UI & tooltips
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* make **`Reverse threshold`** inactive when **`Reverse only internal perimeters`** is activated
* Update ConfigManipulation.cpp
* 100%% => 100%
Also fixed a typo along the way.
* Infill Line Multiplier
* Modular Offset Function
* Lightning multiline
* Crosshatch Multiline
ipCrosshatch
* cleaning
Cleaning
clean2
* 3d Honeycomb
cut poliline ends
* Fill Tpmsd Multiline
Fill Tpmsd Multiline
* Update Multiline function
multiline funcion simplify
* Update FillTpmsD
* FillHoneycomb
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix Honeycomb Multiline
Simplify polylines in honeycomb infill generation
* Improve multiline infill support and pattern simplification
Moved multiline infill application after pattern translation and simplification in Fill3DHoneycomb, and added multiline support to FillAdaptive. Updated honeycomb and 3D honeycomb infill to simplify polylines to 5x line width. Extended GUI and config to support multiline for Adaptive Cubic infill pattern and clarified max value comment.
minimum changes
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Increase multiline fill spacing in honeycomb infill
Adjusts the spacing parameter in the multiline_fill function to 1.1 times the original spacing, potentially improving infill distribution or print quality.
* Refine fill_multiline tooltip and pattern support logic
Updated the tooltip for the 'fill_multiline' parameter to improve clarity and punctuation. Refactored the logic in ConfigManipulation.cpp to clarify which infill patterns support multiline infill.
* better management of non supported infill patterns
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Enable toggling of surface density and overlap options
Added toggling for 'top_surface_density', 'bottom_surface_density', and 'top_bottom_infill_wall_overlap' fields in based on shell presence.
* un toggle shell overlapping option
---------
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
* SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
* Add Cross zag and locked-zag for shoes
Ported from BambuStudio
* wip
* sparse infill roratation template
* solid_infill_rotate_template
* remove rotate_solid_infill_direction
* hide sparse infill rotation template for non applicable infill pattern
* hide solid_infill_rotate_template for non supported solid infill patterns
* update icon
* support empty string for ConfigOptionFloats deserialize
* fix build errors
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Generate support interface iron extrusion
* Always ironing last
* Add options
* Move ironing speed to speed tab
* Don't iron places that are covered by upper support layers
* Disable support interface spacing settings when support ironing is enabled
* Update text
* Add new Bambu RIB wall feature, including only the rib wall generation algorithm.
* Fix Linux compilation errors.
* Attempt to fix flatpak build
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Remove extra spaces between words
* Remove extra spaces after punctuation
* Remove extra spaces before punctuation
* Always needs a space after punctuation
* Always needs a space before parens
* Remove trailing spaces before newline
* Junction Deviation Machine Limit
jd 3
JD menu 2
JD operativo
limpieza
final
* default JD print menu without warnings
* to fix multiple instances
* Only at first layer
* Calibs upgrade
* Shown on Marlin2
Shown on Marlin2
CodeCleaning
* Update Calibration.md
* set on writer
---------
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Introduce option to control number of skirt walls after first layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* One wall draft shield options refactor
* Merge remote-tracking branch 'upstream/main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Renamed to single loop draft shield
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
Add minimum flow ratios for spiral vase transitsions
Currently when starting the spiral vase the extrusion rate is ramped
from 0 to 100% on the first layer and from 100% to 0% on the last layer.
In some cases it can lead to underextrusion at the beginning and end of
the spiral.
This change adds minimum flow ratio options for the beginning and the end
of the vase. This means that instead of ramping from 0% to 100% it
instead ramps from for example 20% to 100%.
This issue has been reported in SuperSlicer
https://github.com/supermerill/SuperSlicer/issues/4195
Change the behavior of "tree support wall count" option, let it control precisely.
0 means auto.
jira: STUDIO-8068
github: 4780
Change-Id: I6d1a64cff9b121f5c0a3e910c5ddbfe6db198687
(cherry picked from commit a557bbe758cd352fa9bb48323995ed2c90737577)
1. open support wall count for normal support
Enabling this option makes normal support stronger and gives
better overhang quality, but also more difficult to removal.
Jira: STUDIO-5192
2. fix a bug where tree support (hybrid style) may get overlapped
extrusions near the walls.
3. fix a bug where raft layers can't be 1 in tree support
Jira: STUDIO-5261
Change-Id: Iadc0c67a9b50b5b221c8e83d5aa22ed282018cf8
(cherry picked from commit c0bb0084e386cb70ed6e16edf93190e4b38f5b90)
(cherry picked from commit bf93fd02fb)
* Add support for perlin noise fuzzy skin
* Support multiple types of coherent noise
* Updated tooltips for more clarity.
* Reorder options as suggested by @discip
* Fix accidental removal of &
* Move libnoise to deps
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Enhancement: ERS segment length - convert to float
To allow splitting of line segments down to 0.5mm for improved external surface finish.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Option to limit ERS to external perimeters and overhangs only
* Label name
* Label update
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
