* e3v3se: disable m73 as not supported in FW
* e3v3se: remove thumbnails
Remove thumbnails generation to not confuse users.
Currently event CrealityPrint does not generate thumbnails for the E3 V3 SE.
* e3v3se: update motion capabilities
Update motion parameters for the Ender 3 V3 SE profiles:
- max acceleration on all axis to 2500 as per product spec
- max X and Y speeds to 250 as per product spec
- max Z speed to 5 as set in factory defaults (M502, M503)
- max E speed to 40 as presented in recommended print parameters on the
product page
Product spec sheet:
https://wiki.creality.com/en/ender-series/ender-3-v3-se/quick-start-guide/user-manual
* Add Creality Ender-3 S1 Plus
* Misc
* Fix nozzle_diameter
* Add printer_variant value
* Change build plate model/texture to use Ender-3 V3 SE
* Enable mesh leveling
* Up max travel acceleration to 5000
* Enable infill_combination
* Add Draft profiles
* Change buildplate model/texture
* Fix build plate model
* Add retraction & detraction speed & change retraction length
* Add filament_ to the beginning
* Revert retraction & detraction speed & retraction length
* Tests
Trying to change retract and detract speed as well as retraction length
Also trying to have Z-hop only happen on top layers
* Apply new values to other nozzles
* disable z_hop
* Lower build plate model
* Resolve merge conflicts
* temporarily remove Ender-3 S1 Plus
* Re-add Ender-3 S1 Plus
* Add CR-10 SE and standard profiles
* Misc
Add more perimeters to CR-10 SE profiles
Add printer to filament profiles
Link everything in Creality.json
* Fix two bugs
* Forgot this
* Fixes#2992 - emboss numbers for 290-305
The existing temperature tower model had the numbers, but they were not
embossed for:
* 290
* 295
* 300
* 305
Signed-off-by: Jamin W. Collins <jamin.collins@gmail.com>
* Add Ender-3 V3 SE .2, .6, .8 and fix small Ender-3 Pro bug
* Forgot to remove these
* Fix error
* Remove these...
* Why did I delete this?
* Revert deletion
* Add missing profiles
* Create 0.24mm Draft @Creality Ender3V3KE.json
* Apply new nozzle sizes to generic filament
* Maybe this will do it
* Revert 0.4 renames & add to Generic ABS
* Add M420 S1; Enable mesh leveling
* Fix wring nozzle_diameter
* Potentially fix the issue of printer not being added after selected
* Add new MyRRF custom printer
* hide user panel when networking plugin is not installed/used
* Fixed a bug that promption of installing plugin notification was not displayed when trying to switch to Bambu device tab
* replay missing_connection animated image when switching to device tab
Size reductions
construct_1_xl_buildplate_model > 1073 from 2250KB
construct_1_buildplate_model > 599 from 608KB
Just joined parts and optimized planar surfaces. didn't changed borders
Also adding a feature for creating 3D bed models from SVG graphics will give a nice reduction on size. Constantly new printers added to profiles. it will be nice upgrade to reduce size of folder
* Add Ender-3 Pro cover
* Add Ender-3 Pro
* Add Ender-3 Pro .2, .4, .6, and .8
* Add Ender-3 Pro processes
* Delete Ender-3 Pro_cover.png
* Add a smaller version of Ender-3 Pro_cover.png
* Delete Ender-3 Pro_cover
* Further image improvements
Used this site https://svgomg.net
Minifier basically joins lines / curves with same style to reduce size
Doesn't change geometry
Size dropped to 2,02MB from 4,75MB
Couldn't tested on UI. Not sure how to do that
* Some improvements for supports and machines limits
* Increase z-hop for KE to avoid the nozzle hit the parts
* Changed jerk V3 KE settings to more logical values.
* Decreased jerk
* Speed, acceleration and jerk settings fine-tunings.
