fix(profiles): add printable_area to fdm_U1 so all nozzle variants inherit correct 270x270 bed
The 0.2/0.6/0.8 nozzle profiles inherit from fdm_U1 which had no
printable_area defined, causing them to fall back to a smaller default
bed size. The 0.4 profile was the only one that set it explicitly.
Move printable_area and printable_height to the shared parent (fdm_U1)
so all Snapmaker U1 nozzle variants get the correct 270x270mm bed.
Bump vendor version to trigger profile re-sync on existing installs.
Co-authored-by: ni4223 <ni4223@users.noreply.github.com>
* Snapmaker U1: add 0.2mm and 0.8mm nozzle profiles
Add machine and process profiles for the Snapmaker U1's 0.2mm and
0.8mm nozzles, and complete the 0.6mm process lineup. Follows the
same data-only pattern used to add the 0.6 / 0.4+0.6 nozzles in
commit afc3756.
The U1 ships with 0.4, 0.4+0.6 and 0.6 nozzle options today; the 0.2
and 0.8 nozzles are supported hardware but have no profiles, so they
cannot be selected. This adds them the Orca-native way: per-nozzle
machine presets plus a model-file dropdown entry, with their process
profiles filtered in via compatible_printers.
Machine (2): lean presets inheriting fdm_U1, mirroring the existing
SM_U1_06 (0.6) preset and overriding only the per-nozzle values;
setting_ids SM_U1_02 / SM_U1_08.
Process (21): 2 per-nozzle commons (fdm_process_U1_0.2_common,
_0.8_common) holding the nozzle line widths, plus 19 profiles
(0.2: 8, 0.6: 6, 0.8: 5) that inherit their per-nozzle common and
carry their own layer height, matching upstream's factoring. The two
0.24 Standard profiles that shared id GP029 are split into
GP029_06_024 / GP029_08_024.
Model dropdown: machine/Snapmaker U1.json nozzle_diameter
"0.4;0.4+0.6;0.6" -> "0.2;0.4;0.4+0.6;0.6;0.8".
Vendor index: register the new presets in Snapmaker.json.
The existing 0.4 / 0.6 / 0.4+0.6 presets resolve identically before
and after. scripts/orca_extra_profile_check.py and the profile
validator both pass.
* chore(profiles): bump Snapmaker vendor version to 02.04.00.04
Bump the Snapmaker vendor config_version so existing installs pick up the new 0.2mm and 0.8mm U1 nozzle profiles. PresetUpdater only re-imports a vendor bundle when the shipped version is strictly greater than the cached one.
---------
Co-authored-by: ni4223 <ni4223@users.noreply.github.com>
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
# Description
* What issue does this PR address or fix?
1. Refactor Polymaker folder within Snapmaker profile directory, so that the structure is more clear.
2. Add more Polymaker filament presets for Snapmaker printers.
* What new features or enhancements does this PR introduce?
1. None
* Are there any breaking changes or dependencies that need to be considered?
1. None
- add Breakaway Support filament
- add preheat params for Snapmaker Dual/IDEX printers
- update the check bounds code in start-gcode, which is now off by default
* Changes:
Improve precise wall
Port PS2.6 overhang slowdown feature
Implement overhang fan for new overhang slowdown algo
Add option to switch between classic/new overhang slowdown implementation
Set Arachne as default engine
Small adjustment of temp calibration range
turn off small perimeter by default
Small UI tweaks
Change default top_surface_pattern to monotonic
Fine tune jerk
Signed-off-by: SoftFever <softfeverever@gmail.com>
* Disable optimizations for RelWithDebInfo
Signed-off-by: SoftFever <softfeverever@gmail.com>
* fix an issue that max volumetirc/vfa calibration can't send to print
Signed-off-by: SoftFever <softfeverever@gmail.com>
#322
* fix build errors
Signed-off-by: SoftFever <softfeverever@gmail.com>
---------
Signed-off-by: SoftFever <softfeverever@gmail.com>
