- WipeTower: use filament_ramming_volumetric_speed(_nc) for ramming, falling back to
max_vol_speed only when nil; gate precool temps on enable_pre_heating
- ToolOrderUtils: disable the inter-layer forecast in the per-nozzle base reorder so
H2D/H2C ordering is unchanged
- PrintConfig: stop stripping filament_prime_volume in handle_legacy; document that
prime_volume drives the Type2 wipe tower and filament_prime_volume the Type1 one
- GCodeProcessor: exclude post-print end-gcode M400 dwells from the M73 estimate and
drop the dead air-filtration state
- Trim verbose BambuStudio source-location comments across the port
The preset option was plugin_preference_overrides while the GUI field type
that renders it was GUIType::plugin_config, for one and the same thing.
Settle on "config": the store, the dialog and the Python hooks all say config
already, so renaming that way touches 4 files instead of the whole plugin
subsystem and the public plugin API.
Keep the _overrides suffix — the option is the preset's override layer over
the base PluginConfig store, a distinction EffectiveCapabilityConfig tracks.
Also wrap the printer tab's group heading in L(); it was the only one of the
three missing it, and was therefore untranslatable.
Enable use_forcast in reorder_filaments_for_minimum_flush_volume_base
to match the multi-extruder path behavior (line 1227).
The forecast solver (solve_extruder_order_with_forcast) considers the
next layer's filament set when choosing ordering for the current layer,
minimizing inter-layer transition flush cost.
Previously disabled (hardcoded false) in the single-nozzle/base path,
causing suboptimal inter-layer transitions. The multi-extruder path
already had this enabled.
Measured on 5cubes (5 filaments, 35 layers, H2C):
- Print time: -12 min (-10%)
- Waste filament: -5g (-28%)
- WT extrusion: -44%
Limited to ≤5 filaments per nozzle per layer (O(N!×M!) complexity).
Clamp ramming speed during extruder changes so the departing nozzle
has enough time to reach precool_target_temp before carousel rotation.
Only applies to extruder changes (not carousel nozzle changes).
Reference to BBS: BambuStudio/src/libslic3r/GCode/WipeTower.cpp
ramming() L3449-3462
End gcode contains firmware-conditional M400 waits for air purification,
timelapse capture, and sound notification that are post-print operations.
These were incorrectly included in M73 total time, inflating the estimate.
The fix detects MACHINE_END_GCODE_START tag during the streaming parse
(process_tags) and sets m_skip_end_gcode_delays=true. process_M400 then
skips timed delays (S/P params) in the end gcode scope.
BBS achieves the same effect by dropping leftover in calculate_time
(is_final=true). We skip at the source instead, which is more surgical
and leaves calculate_time behavior unchanged for all printers.
Affects all BBL printers with MACHINE_END_GCODE_START tag.
Non-BBL printers are unaffected (no tag = no skip).
The upstream _make_wipe_tower() tracked purge volumes per-extruder (2 slots),
which collapsed all H2C carousel filaments into one slot and caused massive
redundant AMS flushing (~40g instead of ~0.4g).
Changes:
- Print.cpp: Replace per-extruder nozzle_cur_filament_ids with BBS
NozzleStatusRecorder that tracks per group_id (carousel slot 0..6).
Use get_nozzle_for_filament() to resolve physical slot per layer.
Select filament_prime_volume_nc for nozzle changes, filament_prime_volume
for filament changes (BBS pattern).
- PrintConfig.hpp/cpp: Register filament_prime_volume (per-filament EC prime
volume, default 45mm³) matching BBS PrintConfig.
- Preset.cpp: Add filament_prime_volume to preset keys list.
Safe for non-carousel printers: group_id == extruder_id when each extruder
has one nozzle, so NozzleStatusRecorder behaves identically to the original
per-extruder tracking.
Reference to BBS: BambuStudio/src/libslic3r/Print.cpp _make_wipe_tower() L3341-3392
reslice() now enforces only the missing-plugin block via
refresh_missing_plugin_block (no second Print::validate); plate
ready-status returns to upstream's plain model_fits, matching
GLCanvas3D::reload_scene. Also restores main's use_bbl_device_tab and
the check_track_enable comment, and drops two unused MainFrame includes.
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
The filament-group golden harness landed with H2C/A2L support (#14685). Its
"FilamentGroup golden regression" / stress_66 case fails intermittently on
Windows x64, on main and on unrelated PRs alike. The test depends on how fast the
runner is.
The k-medoids clustering these goldens exercise is an anytime search bounded by a
3 second wall clock. Every restart is seeded from its own index, so nothing about
it is random. What varies is how many restarts fit in the budget, and the best
cost is a minimum over completed restarts, so a slower runner is never better.
Grading a score produced that way measures the machine as much as the code.
Add a ClusteringBudget struct and let the tests set it. The defaults are the
current 3 seconds and 30 restarts, so slicing behavior is unchanged. A
non-positive timeout removes the wall clock and bounds the search by restart
count alone.
The goldens are then graded under a fixed budget of four restarts, where every
one of them reaches the BambuStudio reference within 3%, so the score becomes a
property of the code. This retires the machine-specific 125103 lock on stress_66.
The default wall-clock path keeps its own test, asserting the grouping is valid
and the search does not run away. It makes no score assertion, because under a
wall clock that number is not a property of the code.
The golden test also checks the run fits in ten times the default wall clock.
Slicing quality depends on how many restarts fit in the budget, so a search an
order of magnitude slower would degrade real groupings while a fixed-budget score
gate stayed green.
The 3% tolerance stays as the parity allowance against the goldens. It also
covers a small spread across standard libraries: the k-medoids search seeds each
restart with std::shuffle, whose algorithm the C++ standard leaves unspecified,
so libstdc++, libc++ and the MSVC STL permute the same seed differently, start
from different medoids, and settle on slightly different groupings, about 3e-4
apart and only on the goldens heavy enough to reach the k-medoids search.
# Description
Adds a --slice (-s) mode to the profile validator that slices a
two-colour cube through every shipped printer, expanding all custom
g-code (change_filament_gcode, machine start/end, etc.). This catches
invalid-placeholder / bad-flow / slicing errors that the static JSON
checks and unit tests can't see.
Included:
- Validator: new -s sweep mode; per-profile error attribution in the
log; resolves the synthetic 2nd-filament nozzle-mapping so multi-nozzle
BBL printers (incl. the Direct-Drive+Bowden X2D) validate cleanly.
- CI, two complementary paths:
- check_profiles.yml — runs the sweep on profile-only PRs (nightly
binary).
- build_all.yml — new parallel slice_check_linux job runs it on
engine/src PRs with the PR-built binary (build_all doesn't trigger on
resources/**, so no overlap). Runs off the build's artifact, so it
doesn't lengthen the build leg.
- Profile fixes surfaced by the sweep: Creality, FLSun, Ginger, Qidi,
RatRig, iQ.
- Engine: whitelist BBL firmware T-opcodes (T1001/T65279/T65535) in the
time estimator (log-only, no g-code change); dedupe a
per-filament/per-layer log flood in get_config_index.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The new "Prime-tower visits..." test from #14685 (H2C/A2L support) throws
"Coordinate outside allowed range" at random on CI, on both Windows arm64 and
Linux x86_64. It's an uninitialized read of WipeTowerData::height.
#10780 (H2D/H2S) added a second wipe tower path, generate_new(), that fills in
depth, bbx, brim_width and rib_offset but not height. The older generate() sets
height, and clear() never did, so on the generate_new path it stays garbage.
first_layer_wipe_tower_corners() passes height to get_wipe_tower_cone_base() as
R = tan(cone_angle/2) * height. The stray bytes are usually zero, so R is zero
and the slice is fine, which is why it passes most runs on every platform. When
they aren't zero the cone radius runs past ClipperLib's limit and the slice
throws. Nothing selects for it, so it just flakes around.
#14685's test is the first to exercise this path, so that's when it started
showing up.
Initializing height in clear() fixes it, same as the m_origin fix in #13712. The
BBL generate_new path has no stabilization cone, so height = 0 is right.
* Fix issue that switching printer profile is slow.
`wxGetApp().get_tab(preset_type)->select_preset(preset_name);` is called twice when switching printer profiles. Only one needed.
* Avoid unnecessary type conversion & function call during printer profile switching:
- Don't call `config->opt_string("printer_model")` repeatedly
- Use ref when possible during iterating
- Avoid unnecessary `wxString` to `std::string` conversion
A dual-nozzle H2C print with support filament hangs at its first nozzle
switch. The emitted file shows the change-filament block's M620 O ordinal
jumping from O1 straight to O230, plus a duplicate "M1020 S<n>" toolchange
command right after every change block. Two causes, fixed together because
they interlock (the ordinal check keys off the same toolchange detection
that suppresses the duplicate):
- append_tcr incremented m_toolchange_count once per prime-tower visit
(roughly once per layer), while the change-filament template only emits
its M620 O{toolchange_count + 1} line on real filament changes. With 229
change-less sparse tower layers below the first support layer, the first
real change reported ordinal 230. The counter now advances only when the
expanded change block really contains a toolchange command, and the
placeholder exposes the upcoming change's ordinal (count + 1). The
set_extruder path already counted per real change and is unchanged.
- toolchange_prefix() returned "M1020 S" for BBL printers, so the
custom_gcode_changes_tool() dedup could never match the stock profiles'
line-leading "T[next_filament_id] ..." commands and the writer's own
toolchange was appended after every change block on dual-extruder
machines. The prefix is now the plain "T" (the manual-filament-change tag
branch stays first), and the M1020 form moved into GCodeWriter::toolchange()
as an explicit branch that also carries the nozzle:
"M1020 S<filament> H<nozzle>". The nozzle parameter is signed on purpose:
the null-safe nozzle lookup legitimately yields -1, matching the stock
templates' own H-1 convention.
The prefix change also lets the CoolingBuffer recognize the change blocks'
T commands as tool boundaries on BBL printers (its per-filament attribution
previously keyed off the duplicate M1020, or nothing at all on
single-extruder models); its existing out-of-range guard ignores
T1000-class machine commands.
Verification: full suites green (libslic3r 48998 assertions / 169 cases;
fff_print 692 / 65 including three new scenarios - writer emission per
printer kind, dedup + ordinal progression on sequential prints, and a
prime-tower regression scenario verified to fail against the old per-visit
counting). Byte gate: 18 of 20 fixtures bit-identical; the sequential repro
differs by exactly its 3 removed duplicate M1020 lines, deterministic
across two runs. Reslicing the field project that exposed the hang yields
M620 O1 followed by a gapless O2..O59 and zero duplicate M1020 lines.
Co-authored-by: songwei.li <songwei.li@bambulab.com>
The time estimator's speed/acceleration limits were indexed by time
mode only, reading slot 0 of the per-(extruder x volume-type) arrays
the multi-extruder profiles already carry (H2C 0.4: 8 entries, H2D
0.4: 10). Every move was therefore modelled with the first machine
slot's limits regardless of which nozzle variant was printing -
estimation fidelity only, since emitted feedrates/accelerations are
decided on the slicing side.
Now the estimator resolves the machine slot of the nozzle currently
mounted in the active extruder: the nozzle grouping context is handed
to the processor BEFORE the streaming replay (new member + setter -
deliberately separate from the post-stream result-field handover that
gates the richer change-time model, whose timing is unchanged), the
occupancy recorder is populated on every filament change (bookkeeping
decoupled from the gated time model; recorder writes have no time
effect), and get_machine_config_idx maps (volume type x extruder type
x extruder) to the slot via the printer's variant layout, newly
carried on the processor result. The feedrate/acceleration getters
gain a slot parameter indexing [slot*2 + mode]; jerk and the
print/travel/retract accelerations stay mode-only. Reloaded sliced
projects re-estimate with the result's saved grouping context;
imported bare g-code degrades to slot 0 - the historical read.
M201/M203 write the parsed value into EVERY slot's mode entry (a
firmware envelope change is global), which keeps per-slot reads in
lockstep with the mode-only reads they replace: the fleet emits
envelope lines before any motion, so estimates - hence the estimated
time header, M73 lines, and every other byte - are unchanged (20/20
pinned-slice byte gate bit-identical, incl. the sequential repro
sliced twice). Fidelity improves where envelope emission is off or a
migrating per-layer plan moves filaments across variants.
Tests: a stub-driven processor case proving the slot follows the
active nozzle through the exact production path (T..H.. commands,
fallback recorder bookkeeping, 4x time ratio on the slow variant),
that emitted M201/M203 reach every slot, and that a missing context
degrades to slot 0. Suites green (libslic3r 48998/169, fff_print
667/62).
When a per-layer nozzle grouping migrates a filament across nozzle
variants, the write-back turns two groups of config arrays from
filament-indexed into column-indexed: the per-variant filament options
(one column per variant a filament uses) and the merged extruder
retract overrides (resized to the column count by apply_override).
Export-path readers that still indexed them with the raw filament id
read a neighbor's column for every filament ordered after a migrating
one: toolchange/standby temperatures (M104/M109), retraction lengths
and feedrates, wipe distance, z-hop types, air-filtration keys, and -
through the Extruder's cached flow term - the extrusion E of every
move.
Now every such read resolves its column through the existing
layer-aware resolver (get_filament_config_index ->
Print::get_filament_config_indx), which returns the raw filament id
whenever no per-layer grouping result is published, so static prints
are byte-inert by construction. The Extruder itself has no layer
knowledge, so it gains an injected config column (set_config_index,
default = filament id) that the generator refreshes at the only two
resolution-changing events - layer change and writer toolchange - and
that re-syncs the cached e_per_mm3 flow term. Old-filament reads
resolve at the current layer, which is safe because the per-layer maps
are gap-filled carry-forward. Whole-array placeholder copies
(toolchange temperature overrides) are rebuilt in filament order,
mirroring the existing per-variant placeholder remap. The resolvers
move to the public section so non-friend helpers (ooze prevention) can
resolve too.
Documented, deliberately unchanged: the wipe tower's per-filament
parameter rows (no layer dimension; tower x per-layer grouping is a
follow-up), travel_slope's physical-extruder read, estimator pre-heat
bookkeeping temps, and index-0 header diagnostics.
Verification: new Extruder column-injection scenario (defaults, column
follow + flow-cache rescale, filament-indexed reads unaffected, reset
semantics) and a migrating write-back case proving the column shift for
filaments ordered after a migrator and the resolver tracking it (11 +
14 assertions); suites green (libslic3r 48998/169, fff_print 655/61);
20/20 pinned-slice byte gate bit-identical (incl. sequential repro x2
deterministic).
Alexandre Folle de Menezes