Models with overhanging areas are easily knocked down with Z hop height
at 0.2mm
Github: None
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I65fa14fe5f217c2d1384569efa8c2233c14dde83
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
for X series and P seris with nozzle 0.4mm.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Iaa15c4ffaeed455f99261151020f13d498c615f4
(cherry picked from commit 3dafafe3a66863b7af743b4fffd41d68b9c24737)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
Remember C10 is for traditional timelapse, C11 is smooth timelapse.
The mother profile of all machines should be right.
Change-Id: Ia941f743d2a81ef4b5b4fa08a37ca654eb86d0d7
1. It seems there are a lot of buffered frames in IP CAM. Have to
wait enough time untill all buffers are flushed.
2. From watermellon's suggestion, increase travel speed duing layer
change, to save time and reduce oozing.
JIRA: STUDIO-2167
Change-Id: Ia2ec0bde216e90207897c00c395f7e02ea2fe342
(cherry picked from commit 9c85a7c68617b1628e1698912da20f1ebc69ec16)
It's not necessary to pause before photo-shooting, but after it.
Pausng by 50ms should be enough.
Jira: STUDIO-2167
Change-Id: I88ba5db1d6cce390ae5e26ac03533b0ee277b5bd
(cherry picked from commit ae34c0b9e875d1e52798a5359b0cce2151942fb8)
move to the middle upper edge of plate and ratract after calibrating to avoid leakage
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idb09aaafee3bfccfd7c14d1140778498195b98c3
fix the text errot of density of PolyTerra
z_hop_type change to auto
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7f59d2620b42d2f2092ebb4c01ac3a5455c40a4f
1 extrude move to dustbin
2 max vol of TPU 95A of X1 to 3.6
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0b9d2a1db9c57c58255f95aad8a77772317a3ec9
Start gcode of P1P is wrong.
This is for github issue #1044
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id078b7c9020ef773373c3486f74dc51385b9dcc0
1. add gcode command for void printing detection
2. fix the issue that the toolhead is not at excess chute position when
smooth timelapse ends, by adding 2s pause after M991 command.
Jira: STUDIO-1996
Change-Id: I40cf16116e742744cea9bd90969e556a9ea2b2f1
(cherry picked from commit 2fbf7ffe6b1bd8850a76e229ff91750c689721b9)
1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
