The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
In file included from /run/build/BambuStudio/src/slic3r/GUI/FilamentGroupPopup.cpp:1:
/run/build/BambuStudio/src/slic3r/GUI/FilamentGroupPopup.hpp:60:17: error: ‘wxBitmapButton’ was not declared in this scope
60 | std::vector<wxBitmapButton*> radio_btns;
| ^~~~~~~~~~~~~~
/run/build/BambuStudio/src/slic3r/GUI/FilamentGroupPopup.hpp:60:32: error: template argument 2 is invalid
/run/build/BambuStudio/src/slic3r/GUI/FilamentGroupPopup.hpp:65:14: error: field ‘checked_bmp’ has incomplete type ‘wxBitmap’
65 | wxBitmap checked_bmp;
| ^~~~~~~~~~~
(cherry picked from commit ab345221437f52606c54c76fd9837bd9dad98d1c)
In file included from /run/build/BambuStudio/src/slic3r/GUI/FilamentGroupPopup.cpp:1:
/run/build/BambuStudio/src/slic3r/GUI/FilamentGroupPopup.hpp:33:18: error: ‘wxTimerEvent’ has not been declared
33 | void OnTimer(wxTimerEvent &event);
| ^~~~~~~~~~~~
(cherry picked from commit b890f0a39fcb48a1f1e1ee01f2aacf5d2fa35ad6)
1. In slice plate mode,force use plate mode
2. In slice all mode, force use global mode
jira:STUDIO-10390
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3edb559043fdc52339b7f611643b8f5ac116571d
(cherry picked from commit f042c817a7ed21b4b18915e2a649aed733a80f48)
1. Add tag to mark the global map mode
2. Fix some wrong usage of bmp in code
3. Fix display error in dark mode
jira:STUDIO-9729
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idb36a5022c403e02c26d7fe23a95dd6877deca90
(cherry picked from commit 5a2abf7e211327cde57717b5ab7b79b63c967bbd)
1. Always change the map and mode in plate if plate mode is not default
2. Always add pop up before slice
3. Fix the mapping issue in gcode viewer
jira: studio-9523,studio-9519,studio-9513,studio-9479
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0d7d5daf081951ea2d49e06565762ac24064e77c
(cherry picked from commit afaa48520e16b6808f05e511ac1cfe91acadc84b)
1. Optimize performance with pop up
2. Optimize display in dark mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic0f72a42e791fb58b84e7a88d7a34ced3a9e8c38
(cherry picked from commit 481ebc4a4b9353d8c9ef9d6bf64cb0006364e839)
1. Initilize the sentences in construct function
2. Fix some ui bugs
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I991df343932bb60d5ba86f41f641661f2159da47
(cherry picked from commit 05383187e02cc0dec6a541859d44237a63d01820)
1. Add filament group pop up when slice
2. Add more filament modes in filament dialog
3. Add capsule button
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8bc3a2e08696e406b89e550a0335a1a36728ee65
(cherry picked from commit f1702a5c3604f685a3b35ea0e83d29bdbbd90f70)
SoftFever