* Option: Show/ Hide inactive plates
* Hide inactive plate volumes by bounds
Switch inactive-plate volume hiding to use geometric overlap with the current plate bounding box instead of object and wipe tower ID mapping. This also guards against a missing current plate and keeps any active volume visible when its transformed bounds overlap the current plate footprint.
* Hide inactive plates per instance and keep them unpickable
Decide what is shown per object instance, from its footprint over the
current plate, so the parts of an object are never split; a selected
instance stays visible.
Keep the hidden state between frames instead of restoring it after each
one. GLVolume::on_hidden_plate records what this update hid, so it only
shows that again and leaves the volumes gizmos hide alone, and the raycasts
made while handling the mouse see the same scene as the frame. Nothing runs
while the inactive plates are shown.
Deactivate the raycasters of the other plates, whose icons still took
clicks where nothing was drawn, move the axes to the current plate, and
limit the option to Prepare, as Preview already shows the current plate
alone.
* Follow the selected plate with the camera while the others are hidden
Selecting a plate in Prepare while the inactive plates are hidden moves
the camera target over it and keeps the angle, distance and height, so
the plate comes into view where the previous one was. A zoom to all
plates, as after loading a project or adding a plate, frames the current
plate instead.
* Add a compact plate switcher while inactive plates are hidden
The hidden plates can no longer be clicked, and the object list gets
crowded on large projects. While they are hidden in Prepare, a column of
numbered buttons in the top left corner, a compact counterpart of the
Preview plate toolbar, selects the plate to show. It highlights the
current plate, dims the empty ones and gives the plate name in the
tooltip.
* Simplify the inactive plates update and the plate switcher layout
Decide and apply each volume's state in one pass instead of filling a
per-volume vector first, and hoist the switcher's loop-invariant colors.
Keep the height the bottom-left corner takes next to the constants it is
made of, with the canvas toolbar's button spacing named, rather than
repeating that layout in the switcher.
* Rename the option to Focus mode
The canvas menu entry reads Focus mode, lit while the other plates are
hidden, and is off by default, so nothing changes until it is turned on.
The app config key is focus_mode. Turning it on zooms to the current
plate, so the plate fills the view.
* Show plate thumbnails in the plate switcher
The switcher shows the thumbnails of the Preview plate toolbar instead of
numbered buttons, with rounded corners concentric with the window's.
Plater::plate_toolbar_image_version() lets it refresh them without
clearing the Preview toolbar's dirty flag.
* Don't draw the sinking contours of inactive volumes
GLVolume::render() skips an inactive volume, but its sinking contour was
still drawn, so an object on a hidden plate left its outline behind.
* Show the plate switcher's scrollbar only on hover, as in Preview
The plate switcher now shares the Preview plate toolbar's scrollbar: the
same width and colors, shown only while the mouse is over the column or
drags the bar, with the mouse wheel scrolling it either way, and tighter
window corners while it shows. Both toolbars draw it through the same
helpers, so they cannot drift apart; the Preview toolbar behaves as before.
Drop the frame style the switcher no longer uses since it draws
thumbnails instead of buttons.
* Make the plate switcher's thumbnails cheaper and match the Preview toolbar
The thumbnail version moves after almost every edit, and the switcher
redrew both thumbnails of every plate each time. It now redraws only the
current plate's, the only one edited while the others are hidden, and the
other plates' once their thumbnails are invalidated, through the new
Plater::update_plate_thumbnails().
IMToolbarItem::set_thumbnail() uploads a plate thumbnail without keeping
a copy of its pixels, a megabyte per plate, and replaces the item setup
the Preview toolbar and the switcher each repeated. The switcher's hover
border takes the Preview toolbar's color.
---------
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Add Align/Distribute objects on the print plate
Ports the Align/Distribute feature from BambuStudio 2.5 (AGPLv3,
same license as OrcaSlicer). Adds a new GLGizmoAlignment helper
that operates on the GLCanvas3D selection, twelve thin Plater
wrappers, and an Align/Distribute submenu attached to the same
five context menus BambuStudio attaches it to: object menu, text
part, BBL part, and the single/multi-volume context menus.
GLCanvas3D::do_move gains a defaulted force_volume_move parameter
so the helper can move multiple selected volumes within a single
object even when selection mode is Instance. GLGizmosManager gains
check_object_located_outside_plate, which switches the active plate
to the one containing the selection before align/distribute runs.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix build errors
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
* Add orca-translations Claude skill and PO tool
Add a .claude skill that guides translation passes over the localization/i18n gettext catalogs. It covers the workflow: run gettext, settle new glossary terms, translate in batches, verify, and report.
Includes translation-rules.md, which condenses the placeholder, line-break and glossary rules plus the guidance on review notes.
Also adds scripts/po_tool.py (standard library only). It lists pending entries with glossary hints, validates and applies translations, adding '# AI Translated' and '# Needs human review' comments, and rewrites only the entries it changes. It can also check catalogs, look up existing translations, suggest glossary candidates and update the wiki glossary TSV.
* Let po_tool apply translations by entry id
pending now gives each entry a short id, so a translation file can name
entries by id instead of repeating the English msgid. apply accepts either.
A "review": "" item clears an earlier review note when overwriting an
entry, and check gives each msgfmt run its own temporary output file so
parallel checks do not collide.
* Fill all empty translations
Regenerate the template with run_gettext --full and translate every empty
entry in the 22 catalogs (7,089 entries) with the orca-translations skill,
following the localization glossary, including the new belt printer,
IDEX/IQEX and plugin terms. Every new entry is marked "# AI Translated";
122 also carry "# Needs human review" with what to check.
* Show entry ids in po_tool lookup and search translations
lookup now prints each entry's id, so an entry found there can be
rewritten with apply --overwrite without repeating the English, and
--msgstr searches the translations instead of the msgids, which finds
every entry that still uses a term being changed.
SKILL.md describes how to change an established term: check the
catalog's usage first, update the glossary cell, then rewrite only the
entries where the term has that meaning.
* Fix mistranslated terms and align catalogs with the glossary
Correct labels that the glossary had copied, and the entries that used
them:
- ca: Raft was rendered as the Brim term; it is now "Rai". Exhaust fan,
Monotonic line, Unretract, Slice, Lateral Honeycomb and PA Tower
labels fixed.
- cs: Lightning infill is "Blesk", not "Osvětlení" (illumination).
- sv: Retraction is "Retraktion", not "Reduktion"; Unretract,
Lagerhöjd, Delkylningsfläkt, Utsugsfläkt, Aligned Rectilinear and the
Preset label fixed.
- de: Brim is "Rand" and Skirt is "Umrandung", as most entries already
had them.
- lt: brim entries used the Skirt word "apvadas"; they now use "kraštas".
- es: Sparse infill is "relleno de baja densidad", the catalog majority.
- eu: nozzle wipe is "garbiketa", not purge.
- th: the project plate is "เพลต", distinct from the bed.
- uk: Quarter Cubic, Latin "PA" in PA Tower, and Belt purge tower.
- pl: Cross Hatch, Tri-hexagon, Volumetric speed and Raft labels.
- zh_TW: Brim stays "Brim", as the existing labels have it.
- tr: "Prime Tower" read "Prime Minister Tower".
- ko: the plugin "Capabilities" label read "performance".
- Build Volume labels fixed in tr, de, cs and eu.
All 242 rewritten entries are marked "# AI Translated".
* Make more UI text translatable and fix pluralization and context
Audit the sources for text that translators could not translate
correctly and fix it.
Mark text that reached users in English only: IDEX/IQEX role names,
plugin permission prompts and errors, 3MF/preset loading errors, G-code
placeholder parser errors, calibration and device messages, notification
texts, file dialog filters, and the config validation messages.
Replace sentences built from translated fragments, such as the prime
tower warnings, "left"/"right" nozzle names, and "Filament " + number,
with single msgids that have placeholders, so translators can reorder
and inflect them.
Use plural forms for texts with a count ("%1% mixed filaments",
"%d objects", "%1% triangles") instead of "(s)" and mismatched verbs.
Fix the swapped singular/plural pair in "The following presets inherit
this preset".
Add translation contexts where one English word has several meanings
(Subscribed/Local, Standard, Pause, View, Step, Model, Camera, Flow,
Filter, Others, Prepare, the Design tools). Show "Size" instead of
"Build Volume" in the Cut tool, which displays the object size.
Fix code that compared translated text with English (the Edit G-code
dialog group, the plugin registration failure check), and add the
bundled web pages' missing string-table entries. Use the single
character for degrees Celsius, say "G-code", and describe the head
filament map without internal jargon.
Install the libslic3r translate callback before the presets load, so
their load errors are translated, and list the 28 source files that had
marked strings but were never extracted into localization/i18n/list.txt.
* Suggest earlier translations and list fuzzy entries in po_tool pending
pending now attaches the closest earlier translation of a similar
English text (from obsolete or translated entries), so a reworded or
split string keeps its wording, and it lists fuzzy entries by default,
since users never see them. A fuzzy entry also carries its stale
translation as previous_translation.
* Fix wording of the non-boolean operands error
The logical operation error said "operators" where it means the
operands the operation was applied to.
* Translate the newly translatable strings in all languages
Regenerate the template after the translatability changes and fill every
new or changed entry in the 22 catalogs (about 12,800 entries): the
strings that became translatable, the plural forms, the entries split by
context, and the previously fuzzy singular entries that became plurals.
Every new entry is marked "# AI Translated", and about 360 also carry a
"# Needs human review" note saying what to check. Terms follow the
localization glossary. Earlier translations of reworded strings were
reused where the meaning was unchanged. Existing entries were not
changed, and obsolete entries are kept.
* Document the source translatability audit in the orca-translations skill
Add a reference describing how strings reach translators, what to look
for (untranslated text, spliced sentences, missing plurals, ambiguous
words), what not to translate, where a context cannot be carried, and
what to do after the edits, plus a scanner that lists untranslated
user-facing string literals.
* Document how to write translatable strings in AGENTS.md
Tell developers to keep each message complete in one msgid: use
placeholders instead of concatenating translated fragments, plural forms
for counts, and contexts for ambiguous words, and to list new source
files in localization/i18n/list.txt. Add a matching code review item.
* Translate the strings added since the rebase
Regenerate the template against the current main and translate the 26
new entries per language: the Fix Model commands and messages, and the
texture displacement image adjustment panel. Each new entry is marked
"# AI Translated"; existing entries are unchanged.
* tidy
The texture-displacement gizmo pushes pane state to the UV editor from the
preview rebuild that runs on every frame of a slider drag. Tile size is the
only one of the layer card's sliders whose value appears in that pane state,
so dragging it changes the "N.N mm tile" label, the panel relays out, and the
UV canvas receives a synchronous wxEVT_SIZE. Its on_size() flushes a paint
with Update(), and render() then makes the app's single shared wxGLContext
current on the UV drawable in the middle of the 3D canvas's frame.
On X11/GLX that out-of-turn context activation is fatal: the drawable the
3D canvas later swaps no longer belongs to the current context, the server
returns BadMatch, and GDK turns the unhandled X error into g_error(). EGL on
Wayland reports only a status, so the same theft silently corrupts the frame
instead of aborting - which is why the guard is not conditioned on the
display backend.
Add GLCanvas3D::is_frame_in_progress(), backed by a counter that
_render_frame() maintains through its existing scope guard, and let the UV
canvas skip the synchronous paint while a frame is on the stack, re-queueing
it with Refresh() so nothing is dropped. Rebind the context with
_set_current() before SwapBuffers() as well, so a surface that steals it by
some other route - a modal GL dialog a gizmo opens from its panel - cannot
turn the swap into the same fatal error.
The bed-axes toggle added for the Design tab's reference planes reads
m_design_sketch_tool, which only exists under SLIC3R_CAD. Compute the
flag once and read the sketch tool inside the same guard as its other
uses.
The directive sat at global scope in a header that DeviceManager.hpp
includes, so most of the GUI compiled with all of std in the global
namespace. 42 files had come to rely on it, mostly for string, vector
and unordered_map, four of them for the ""sv and ""ms literals.
Those sites are qualified. GCodeViewer.cpp spelled the type as
std::vector<::string>, which only resolved through the directive. The
files that use the ""sv and ""ms literals get a file-scope
"using namespace std::string_view_literals;" or
"using namespace std::chrono_literals;", as other sources already do.
The "Show raw G-code (belt only)" toggle, retired in #16236, returns as
an item of the Preview canvas view menu (with its B shortcut), and only
there: no legend checkbox. Unlit, the preview shows the designed,
upright view; lit, the raw machine-frame G-code, which is what to look
at when checking the machine frame transforms. The toggle is view
only; exported G-code is the same either way.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Each of these headers put a using or namespace alias at global or
namespace scope, which every includer inherited:
- BBLTopbar.hpp: "using namespace Slic3r::GUI;" at global scope, reached
through MainFrame.hpp. Seven source files used GUI names unqualified
outside the namespace because of it, one of them as "::RadioBox".
- IMSlider.hpp and TickCode.hpp: "using namespace CustomGCode;" inside
Slic3r.
- ProjectTask.hpp, Jobs/PrintJob.hpp and ConfigWizard_private.hpp:
"namespace fs = boost::filesystem;". PresetBundle.cpp and GUI_App.cpp
had no alias of their own.
- VoronoiUtils.hpp: "using VD = Slic3r::Geometry::VoronoiDiagram;" at
global scope.
The headers now spell the names out. Source files that used them get
the qualifier, or a using of their own where there are many uses.
Follow-up to #16195 and the review discussion on #14394 (yw4z's note
about the third column on the *Belt tilt* row). Removes the belt options
that are redundant or unused before the branch ships, so they never need
compatibility handling after a release, and fixes supports under a
leading overhang. Every removed key is on `handle_legacy()`'s ignore
list, so existing profiles and 3MFs load silently.
## Removed
- **`belt_slice_rotation_global`**, **`preslice_remap_global`**,
**`belt_preslice_global`** (*Global mesh transforms*) and
**`gcode_back_transform`** — the global mode and the back-transform are
what belt printing is; they are presumed on wherever the flags were
consulted (`PrintObjectSlice`, `BeltBackTransform`, `BeltGCode`,
`Print::process`, `PrintApply`, `GCodeViewer`). The *Belt tilt* row is
axis + angle only; the three `fdm_belt_common.json` drop the keys.
- **`preslice_remap_x/y/z`** — no profile used the pre-slice axis remap;
the belt tilt axis plus the G-code axis remap cover the machines that
exist, and its implementation only agreed with itself for a plain swap.
The forward transform is the rotation.
- **`belt_support_z_offset_mode`** and **`belt_support_floor_mode`** —
the first was never read by a generator; the second's only shipped value
(*Generator only*) is now the behaviour.
- **`first_layer_plane`**, **`first_layer_plane_offset`**,
**`first_layer_plane_thickness`** and `FirstLayerPlane.{cpp,hpp}` — the
first-layer band is measured from the belt surface and is one first
layer height thick.
- `belt_brim_instances_compatible()` and its validation warning:
instances along the belt get their brim.
## Supports under a leading overhang (the clipping at the object's local
Z = 0)
The slicing frame of a belt object started at its lowest vertex, but the
belt under the leading end of an overhang lies below that, so no
generator could reach it: normal supports stopped at the object's lowest
layer, and both tree generators carried extension hacks sized from the
pre-rotation bbox and capped at global Z = 0 (right only for the
trailing half of the belt). The frame now starts at the lowest
belt-floor point under the footprint, less a 10 mm margin along the belt
for the base of a support column, and the extensions are gone:
- **Normal supports** run in the object frame and get the global belt Z
offset shifted onto the result (as organic already did). With the offset
on the object layers, a top contact at negative Z turned the
intermediate-layer count negative and the generator allocated layers
until the kernel killed it — any overhang in the leading half of the
belt did this. The first-layer flange expansion is skipped on a belt
(the first support layer is the leading tip, not a flange).
- **Classic tree** nodes keep dropping until their whole circle is in
the belt, so a branch tapers to a tip on the belt instead of stopping a
radius above it.
- **Organic**: the belt is no longer a support blocker. A blocker is a
collision, and a branch descending onto one slides off it, down the belt
and ahead of the part; the belt is where branches end, which the
per-layer floor clipping already does.
Regression test *Belt supports reach the belt under a leading overhang*:
a cube with a fin whose underside is parallel to the layers, 20 mm ahead
of the cube and up to 41 mm of slicing Z above the belt, for normal,
organic and classic tree supports; the lowest support layer must sit on
the belt beneath its own lines.
The belt object height (the layer range) is now estimated from the box
of the mesh as placed on the bed. `raw_bounding_box()` has the
instance's Z offset removed, which was harmless for the old
rotated-extent estimate but not for one anchored at the belt floor (a
point's rotated z and the floor under it move in opposite directions
under a Z shift): with the first version of this change every part came
out as a wedge, sliced only up to its diagonal, in the GUI and CLI
alike. Caught by a GUI test pass; the leading-overhang test now also
checks that the whole part is sliced.
## Belt brim after the parallel support step
`belt_brim_obstacles()` reads every object's layers and support layers,
which another object's support step rebuilds (and now shifts) at the
same time. The brim is generated sequentially once the parallel step is
over (`PrintObject::generate_belt_brim()`). This is the race behind the
Windows arm64 segfault in *Belt brim of each object precedes its
perimeters on its own filament*.
## UI
- *Belt tilt* is two rows: the angle (Advanced) and the axis (Developer;
a profile-level kinematics choice). A shared line is shown by its first
option's mode, so they cannot share one.
- *Machine frame transforms* is five single-option rows (G-code remap X
/ Y / Z, Decouple machine-frame tilt, Machine-frame tilt angle — the
angle row only appears when decoupled) instead of two multi-column
lines; the remap fields got full labels since they stand alone now.
- The gravity indicator on the bed is a plain line along the up
direction (no cone, 60 % of the axes' length), per yw4z.
- The *Show raw G-code (belt only)* legend/canvas toggle and its `B`
shortcut are gone; the preview is the designed view.
Also carries the two-line `phong.fs` fix from #16226 (merges as a
no-op).
## Verification
- `libslic3r_tests` 1116 passed (92 648 assertions); `fff_print_tests`
351 passed (561 696 assertions).
- `scripts/clang_tidy_diff.py --base upstream/belt-printer`: no
findings.
- `scripts/orca_profile_tool.py check`: no profile references a removed
key.
- GUI target builds; a scripted GUI pass (xdotool) checked the settings
groups in every mode, slicing, export, instances, the purge tower,
calibration dialogs, the wizard, printer switching and 3MF round-trip.
The wiki pages (OrcaSlicer/OrcaSlicer_WIKI#374) get a follow-up dropping
the removed sections once this is in.
The slicing frame of a belt object started at its lowest vertex, but the
belt under the leading end of an overhang lies below that, by the
overhang's length times the tilt's shear. Every support generator works
in layers at z >= 0, so none of them could reach it: normal supports
stopped at the object's own lowest layer, and the two tree generators
each carried a stack of hacks to extend themselves below it (a post-hoc
copy of the lowest base area in TreeSupport, "virtual belt raft layers"
in TreeSupport3D/TreeModelVolumes), sized from the pre-rotation bbox
and capped at global z = 0, which is only right for the trailing half
of the belt.
Start the frame at the lowest belt-floor point under the footprint
instead, less a 10 mm margin along the belt for the base of a support
column (BeltSliceStrategy::apply_preslice_transforms and
BeltTransformPipeline::compute_belt_height_and_floor agree on it). The
layers between it and the first vertex come out empty, which belt
slicing already tolerates, and the generators need no extension at all:
- normal supports: the generator anchors its layer grid at the frame
origin, so run it in the object frame and shift the global belt Z
offset onto the result afterwards, as organic supports already did.
With the offset on the object layers a top contact at negative z
turned the intermediate-layer count negative and the generator
allocated layers until the kernel killed it (any overhang in the
leading half of the belt). Drop the first-layer flange expansion on a
belt: the first support layer is the leading tip of the support, not
a flange, and inflating it put lines in the air ahead of the belt.
- classic tree: a node now keeps dropping until its whole circle is in
the belt, so the branch tapers to a tip on the belt instead of
stopping, a radius above it, when its centre crosses.
- organic: the belt is no longer a support blocker. A blocker is a
collision, and a branch descending onto one slides off it, down the
tilted belt and ahead of the part; the belt is where branches end,
which the per-layer m_belt_floor clipping already does.
The belt brim is generated after the parallel support step instead of
inside it: belt_brim_obstacles() reads every object's layers and support
layers, which another object's support step rebuilds (and, now, shifts)
at the same time. This is the race behind the Windows arm64 segfault
in "Belt brim of each object precedes its perimeters on its own
filament".
Also: the belt tilt axis moves to Developer mode as its own row (a
shared line is shown by its first option's mode), first_layer_plane
band thickness, belt_support_floor_mode, belt_preslice_global and
gcode_back_transform are retired and presumed on, the gravity arrow is
a plain line along the up direction, and the "Show raw G-code (belt
only)" preview toggle is gone.
Regression test: "Belt supports reach the belt under a leading
overhang" slices a cube with a fin whose underside is parallel to the
layers, 20 mm ahead of the cube and up to 41 mm of slicing Z above the
belt, for normal, organic and classic tree supports, and checks that
the lowest support layer sits on the belt beneath its own lines.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The XY, XZ and YZ planes no longer cross through the bed. Each is a small square in its axis
colour, set off from the axes into the corner that faces the default front view, with its name
written in the plane. Dash-dot axes run between the squares and replace the bed's axis triad
while they show. Hovering a plane greys it and selecting one makes it solid, and picking a
solid face now clears a previously picked plane.
In the Design tab the button always swung the camera to the plate view and framed the whole
bed, whatever was selected: the tab's picks and sketches are neither the canvas's selection
nor its volumes. It now frames the selected faces, body, edges, vertex, sketch region or
sketch entities, and with nothing selected everything on show — the visible bodies, the
feature preview and the sketches — keeping the current view direction. An empty tab still
frames the bed as before.
The line started at a fixed inset scaled like the ImGui style, while the navigator and the
round canvas buttons scale with the monitor's DPI on Windows, so at 150% the buttons covered
its first words. It now starts past the edge the canvas reports for that corner.
Brings belt-printer up to main eb5b9a77b9. One conflict: main translates
the pressure advance test name (#16142) on the line after belt's guard that
keeps PA Line and PA Pattern off belt printers; both are kept.
* plates-toolbar-scrollbar-size
* update
* filament grouping dialog
* mixed filament list
* Update StepMeshDialog.cpp
* moves plot scrollbar
* fix position of popups
* printer agent combo box width
* match multiline text control background
* add dots to configure button
* also correct label color for multiline input
* side tools connecting text color
* recenter dialog text color
* preferences experimental features
* upgrade panel hyperlink color + right margin
* fix position of + sign on printer selector
* speed control popup
* bbl fan control window
* AMS materials setting
* monitor > ams section
* match background color of multiline text editor on project page
* Fix SwitchButton colors
* bbl camera popup
* BBL > Send print dialog
* Revert "BBL > Send print dialog"
This reverts commit 128e145897.
* Revert "bbl fan control window"
This reverts commit 4a0db62790.
* Revert "bbl camera popup"
This reverts commit e2301e3237.
* Revert "monitor > ams section"
This reverts commit 66e6894eb1.
* Revert "fix position of + sign on printer selector"
This reverts commit 1523ba24c0.
* Revert "upgrade panel hyperlink color + right margin"
This reverts commit 541f2514c5.
* Revert "side tools connecting text color"
This reverts commit a9ab074247.
* Revert "recenter dialog text color"
This reverts commit f4670d32b2.
* Revert "AMS materials setting"
This reverts commit b12827f9b5.
* Revert "Fix SwitchButton colors"
This reverts commit 2d4f1d1fe9.
* match object list background color
* match compare dialog wxDataViewCtrl background color
* fix centering of iconized buttons on linux
* fix compare dialog background color not applied on linux
* edit gcode dialog components background color
* Update Plater.cpp
* fix dev button font size
* Fix scaling issue on SwitchButton while using 150%
* transfer or discard changes dialog wiki label
* "Transfer or Discard changes" / "Unsaved Changes" dialog header color
* object table colors & header spacing
* progress dialog
* fix progressbar look on linux
* fix build
* fix build
* fix centering of iconized icon again
* fix header background color
* revert bbl fan control
* add includes
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Upstream's clang-tidy gate now checks that the lines a pull request changes
include the header for every symbol they use. The IMEX sources, their tests,
and the lines this PR adds to shared files relied on the precompiled header and
transitive includes. This adds the includes clang-tidy names; no code changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Panning or orbiting with a right-drag no longer ends the polyline chain or drops
the point already placed. Only a right-click that doesn't move does. In the
Touchpad camera style, Alt+move and Shift+move now orbit and pan even while a
draw tool is armed.
* Remove Unused Project Includes and Forward-Declare Where a Type Is Only Referenced
Generated with include-what-you-use and applied conservatively. Only OrcaSlicer's own headers, the ones under src/ and tests/, are removed or forward-declared; standard-library and third-party includes are left alone. An include is removed only when both the Release and the Debug configuration leave it unused, never from inside a conditional block, and never from a file with platform-specific blocks, which only gain includes. Files whose only use of a header sits behind a feature or debug macro (libvgcode's OpenGL ES and marker code, the ARACHNE/TESTS_EXPORT_SVGS debug output) keep their includes.
clonable_ptr.hpp gains #pragma once; it had no include guard and was only safe while Config.hpp was its sole includer.
* Remove Unused Project Includes From Files With Platform-Specific Code
A Linux include-what-you-use run cannot see the code inside _WIN32, __APPLE__ or __linux__ blocks, so its verdict is only taken where nothing the removed header declares, directly or through what it includes, is named inside those blocks. Removals also have to hold in both the Release and Debug configuration and never touch a line inside a conditional block.
* Restore the libslic3r Precompiled Header and Direct Includes Lost in the Platform Pass
The platform-file pass treated pchheader.hpp as an ordinary header and
emptied it, and left GUI_Preview.hpp and 14 other files relying on
headers they no longer reached directly.
* Restore MainFrame.hpp in ParamsDialog.cpp for the Windows-Only Reparent Call
* Include Headers That Files Reached Through Ones the Cleanup Removed
* Drop Includes Duplicated by the Cleanup or by Main's Own Additions
* Leave PreciseSeam.cpp as Main Has It After the Precise Seam Rework
The Design view drew sinking outlines by looking up its bodies in the
plate's model, reading past the end of an object's volumes once a body
was committed. The Design canvas no longer draws sinking outlines.
Main's assignable shortcuts replaced the canvas key switch that carried
the belt "show designed / show raw G-code" toggle on B. Register it as
ToggleBeltRawGcode, bound to B in the Preview (B is only taken on the
Plater, by the mesh boolean gizmo), so it can be rebound and is listed in
the shortcuts dialog. The legend checkbox shows whatever key is bound.
Brings belt-printer up to main 4b4a261787. Resolutions:
- G-code header (#15897, #15915): main moved the header, config and
thumbnail block later in _do_export; write_belt_header() moves with it,
still after the thumbnails and outside the BTT_TFT gate.
- _extrude: first-layer acceleration keeps the per-path first-layer plane
test with main's cached nozzle index (#16028); main's set_speed out-param
form (#16108) everywhere else.
- GCodeWriter (#16108): the arc-to-polyline fallback for machine mappings
that cannot express G2/G3 now runs in the out-param extrude_arc_to_xy,
which is the overload GCode calls, and appends to the caller's string.
- GCodeProcessorResult: the belt fields join main's forwarding assign.
- Clipper2 (#15969): belt arrange helpers take Slic3r::Point; the tree
support join types lose their ClipperLib qualifier.
- CLI arrange (#15837): belt printers still reserve no wipe tower.
- Wipe tower options (#15841): the two new sparse-layer toggles are hidden
for belt printers like the rest of the tower options.
- Keyboard shortcuts (#15706): main's registry replaces the old key switch;
the belt view toggle is re-registered in the next commit.
- Print::process: the belt purge-plan undo runs before main's SliceStarted
event.
- scripts/filament_id_snapshot.json: deleted on main (a77209af8f).
- Includes and appended tests: union of both sides.
The sidebar can move to either side, float, be resized, and collapse with
the canvas button or Shift+Tab. Its layout is remembered separately from
Prepare's, starts where Prepare's sidebar is, and View > Reset Window
Layout resets both tabs.
Five commits: a section view for the 3D canvas, a faster G-code preview, user
preset values kept on extruder variants they don't list, debug build CMake
fixes, and a 30 minute timeout on macOS notarization.
Two conflicts, both in GLCanvas3D. The header's were neighboring
declarations, kept from both sides. In the transparent pass, the section view
removed the assemble view's painter block that followed our ghost render;
the ghost render stays where it was, at the end of that pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Seven commits: painted multi-material segmentation made deterministic, missing
includes added across src/slic3r/GUI, U1 high-flow nozzle variants, Windows
ARM64 build and HTTPS fixes, and a rule added to the wxWidgets agent skill.
Three conflicts, all include lists: upstream's include pass and ours each added
to the same lists in GCodeViewer.hpp, PartPlate.hpp and PartPlate.cpp. Resolved
as the union of both. Three includes both sides had added at different places,
which git kept twice, are kept once: Color.hpp and <set> in PartPlate.cpp,
<sstream> in Plater.cpp.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
