Reconciles the belt-printer branch with upstream PRs through #13723. Six
files had conflicts; three additional files needed manual follow-up fixes
where the auto-merge produced code that referenced upstream-renamed fields
or changed function signatures.
Notable reconciliations:
- TreeSupport.cpp: kept belt-floor early-exit branches around HEAD's
drop-down logic, folded upstream's `(distance_to_top > 0 ? 1 : 0)`
formula into the non-belt-floor path (upstream PR #11812). Dropped dead
`roof_enabled`/`force_tip_to_roof` locals.
- TreeSupport3D.cpp: combined upstream's safety-offset + remove_small
changes with HEAD's belt-floor clip in the per-slice trim loop. Dropped
HEAD's `else` block (superseded by upstream's rewritten bottom-contact
propagation) and re-added the belt-floor clip into the new propagation
loop. Gated the propagation on belt printers to prevent OOM when
belt-floor clipping produces empty initial slices.
- TriangleSelector.{cpp,hpp}: merged both new `select_patch` parameters
(HEAD's `up_direction` and upstream's `select_partially`); body uses
`dot(up_direction)` for the overhang angle check and forwards
`select_partially` to `select_triangle`.
- SupportMaterial.cpp: `slicing_params.soluble_interface` →
`zero_gap_interface_bottom` in HEAD's `detect_belt_floor_bottom_contacts`,
matching upstream's same-purpose rename at line 2495.
- Custom.json, GCodeWriter.cpp: simple additive merges (kept entries /
includes from both sides).
Verified by building OrcaSlicer (RelWithDebInfo) after a full deps
rebuild (Eigen v5.0.1, libigl v2.6.0 are now managed deps) and slicing
a scaled Benchy on the NORMALIZER belt-printer profile without OOM.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* minor logic swap
* first attempt, has a race condition
* fixed the offset issue
* found a solution, I think things work now (at least once I quash this race condition)
* still chasing down race conditions
* add manual shear / scale order strategy swap
* tweak manual shear, fix ui uninitialization crash
* fix z height / g-code desync issue
* fix shear then scale cutoff planes
* getting closer
* fix support termination planes
* fix incorrect offsets in shear-then-scale mode
* test - fix overextrusion due to model/layer scale
Conflicts resolved in src/libslic3r/GCode.cpp and src/slic3r/GUI/GUI_Factories.cpp.
GCode.cpp: combined upstream's air-filtration per-extruder gating
(activate_air_filtration_during_print / _on_completion), the new
extrusion-role-change gcode lambda, ZAA's path.z_contoured arc-fit
disable, raft-aware slow_down_layers branch, and Vec3d/Line3 ZAA
plumbing with the local belt-printer changes (path_on_first_layer,
effective_layer_index_for_point, should_disable_arc_fitting). All
auto-merged m_writer.X() calls converted to m_writer->X() to match
the local unique_ptr<GCodeWriter> refactor.
GUI_Factories.cpp: inserted brim_flow_ratio in the Support category
list and renumbered around the local build_plate_tilt_x/y entries.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* Make filament compatibility temperature-aware
Extend filament compatibility checks to consider actual nozzle temperatures and temperature ranges.
Print::check_multi_filaments_compatibility now accepts nozzle temperatures and range lows/highs; it resolves missing ranges from material defaults, computes per-filament effective temperatures, and checks pairwise compatibility (including high/low/mid mixed cases).
Updated callers in Print::check_multi_filament_valid and CalibrationWizardPresetPage to pass nozzle settings, consolidated user-facing warning strings, and fixed extruder index handling and minor logic/path improvements.
Clarify incompatible nozzle temperature warnings
* Update Print.cpp
* Remove json usage
* Reduce messages
* Fix: Enable instance collision detection in GCode and Print clearance
Squashed commit containing:
- Fix gcode path conflict detection in ConflictChecker.cpp by iterating all instances.
- Improve clearance validation in Print.cpp by calculating convex hulls per instance (fixes scaling/mirroring issues).
- Added // Orca: comments to mark changes.
* Fix Wipe Tower G-code conflict detection for WipeTower2
* Fix: Improve object/instance selection for collision and validation warnings
- Updated validation logic in Print.cpp to report specific ModelInstance instead of ModelObject for collision/clearance warnings.
- Updated NotificationManager and Plater to handle ModelInstance selection in 'Jump to' links.
- Added fallback to object selection if specific instance cannot be selected.
- Included fixes for G-code conflict detection (ConflictChecker, GLCanvas3D) to also report instances.
- Improved GUI_ObjectList to update canvas selection when items are selected via API.
* Fix: Prevent crash when loading .3mf projects
Moved update_selections_on_canvas() out of ObjectList::select_items() to avoid premature UI updates during loading. Canvas updates are now explicitly called in NotificationManager and Plater callbacks where needed.
* Fix: Address code review comments
- Fix memory allocation for extrusion layers deep copy
- Remove unused variable in GLCanvas3D
- Fix string formatting crash risk in NotificationManager
- Remove dead code in Plater
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
# Description
This commit adds the enhancement of https://github.com/OrcaSlicer/OrcaSlicer/issues/13116
- Adds checkboxes to enable or disable the fan speed override during print or after printing is completed. This allows users to, for example, only override the fan speed during printing whilst leaving the fan speed as is set in the machine gcode at the end.
- Two new flags are added for this: `activate_air_filtration_during_print[extruder]` and `activate_air_filtration_on_completion[extruder]`. These can be used to more finely control machine gcode
- Current filament settings remain as they are: `activate_air_filtration[extruder]` settings are unaffected and by default both new flags are set to true, ensuring the same set behavior as before.
# Screenshots/Recordings/Graphs
<img width="856" height="208" alt="Screenshot From 2026-04-09 18-57-14" src="https://github.com/user-attachments/assets/e71e7de3-2def-4046-b5dc-55bf3b516ce5" />
As you can see there are now checkboxes left of the fan speeds. They have their own tooltip too, which also helps identify the correct flags for users who want to adjust their machine gcode.
## Tests
I have thoroughly tested this on my own computer (CachyOS) and on my printer. I have also carefully checked the gcode in every possible state this is in and ensured that the unsaved changes dialog properly displays the labels for these settings. Flags are set properly, sliced files properly use the flags if you check for them in machine gcode and default behavior is unaffected for those who have already changed settings for air filtration. From what I can see, this does exactly what it should be doing without any issues.
* make initial layer travel move acceleration and jerk configurable
* Update spelling to match UI pattern
* Update min integer and re-order to match patterns
---------
Co-authored-by: Thomas Scheiblauer <tom@sharkbay.at>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
- Add BeltBackTransform class that inverts the shear/scale matrix and
applies it in GCodeWriter::to_machine_coords() so G-code outputs in
the machine's physical coordinate space, gated by new
belt_gcode_back_transform config option
- Extend belt floor clipping to all three tree support pipelines
(Prusa-style, Orca organic, TreeModelVolumes) with per-layer polygon
clipping, anti-overhang integration, and belt raft extension layers
- Fix tree drop_nodes() belt termination, organic support global Z
offset, collision calculation index bug, and first-layer brim/empty
layer checks for belt printers
two-shot - first build built but didn't plumb to UI. Woah.
add pre-slice axis remap, because Y needs to be Z
going to change tactic and move based on bbox min
switch to per axis snapping
per axis swap snap now per object
build plate tilt wasn't invalidating slicer settings
support upper bound now correct, need to get lower bound corrected
axis swapped support termination corrected
Z Shear works with and without pre-slice remap now
- Fix support clipping z-shift calculation by removing coordinate-space
mismatch and sync belt_floor_z_shift with global_z_offset; fix
invalidation so posSupportMaterial no longer resets slicing params
- Add belt floor polygon clipping to non-organic tree support
(slim/strong/hybrid) with collision surface integration in
TreeSupportData, belt extension layers, and first-layer brim
suppression
- Add belt floor clipping to organic tree support pipeline with virtual
belt raft layers, per-layer polygons in TreeModelVolumes, and
post-generation layer trimming; fix pre-existing processing_last_mesh
bug in calculateCollision()
Fix belt floor support clipping: z-shift, invalidation, and global offset
- Fix support clipping z-shift calculation by removing coordinate-space
mismatch (raw_bounding_box min.z vs trafo_centered m_belt_min_z) and
sync belt_floor_z_shift with global_z_offset in global shear mode
- Fix invalidation so posSupportMaterial no longer resets slicing params,
preventing the exact posSlice z-shift from being overwritten by the
bounding-box approximation on support-only setting changes
- Remove double-counting of global z_offset on support layers — support
already inherits the offset from object layers during generation
This Work Was Co-Authored-By Claude Opus 4.6 (1M context) <noreply@anthropic.com>
UI: gray out inactive belt sub-options, rename to mesh transforms, move to Advanced
Fix mesh clipping through build plate after belt shear/scale transform
Generalize G-code viewer designed-view toggle for full belt transform
Clip support layers to transformed belt floor plane
Supports below the tilted build plate (Z = shear_factor * from_axis - min_z)
are now clipped via half-plane intersection after generation. Belt floor
parameters stored in SlicingParameters and populated in both update_slicing_parameters()
and the static slicing_parameters() overload.
Make belt G-code viewer toggle more prominent, add B keyboard shortcut
- Add separator + teal "Belt Printer" header in legend panel
- Append [B] hint to checkbox label
- Add B key shortcut in GLCanvas3D to toggle designed/machine view
- Read belt_printer_angle from loaded G-code headers to enable belt view
Add per-axis global transform option for belt printer shear
New belt_shear_{x,y,z}_global bool configs. When enabled, shear incorporates
instance shift so objects at different bed positions get position-aware
transform (Z += factor * instance_shift_on_from_axis).
Fix global shear: use layer Z offset instead of mesh transform, add config invalidation
- Global shear offset applied as post-slicing layer print_z adjustment
instead of mesh transform (which was absorbed by min_z normalization
or shifted mesh out of slice range)
- Register all belt transform options in Print::invalidate_state_by_config_options
to trigger posSlice re-slicing (the fallback only invalidated Print steps,
not PrintObject steps — belt changes had no effect without manual re-slice)
- Belt gcode remap options added to steps_gcode (gcode-export only)
- Skip empty-first-layer check for belt objects with global Z offset
WIP: split instances for global shear, relative Z offsets, debug logging
- PrintApply: when belt global mode active, prevent instance grouping by
adding unique Z perturbation to trafo — each copy becomes its own
PrintObject with independent layers
- PrintObjectSlice: compute global Z offset relative to minimum Y shift
across all PrintObjects (lowest-Y object stays at Z=0)
- Debug logging (warning level) for belt global shift values and offsets
Known issues:
- Cached posSlice results cause stale offsets when mixing copies with
individually-added objects — need to compute min baseline outside slice()
- Supports still generate to Z=0 instead of object's global Z offset
Fix global shear for copied objects: disable shared-object layer optimization
When belt global Z shear is active, each object needs unique layer Z
values based on its bed position. The shared-object optimization was
causing copies to reuse the source object's layers (and its Z offset)
instead of computing their own position-based offset.
started work on getting supports to work properly
one step forward, one step back
this version didn't quite work. Getting somewhere though
about to add UI controllable tests
added configuration options for supports
tweak CLAUDE.md to be more aggressive for my machine. This commit should probably be pulled out before contributing upstream
still chasing down some bugs
moving objects between slices no longer results in improper Z-height because of caching
added more data to the debug logs
Z offset is getting more global again
still not quite there, I think there's a fundamental logic flaw?
hunting for bugs
finally have a functional fix
Add belt floor clipping to tree supports (organic and non-organic)
- Add belt floor polygon clipping to non-organic tree support
(slim/strong/hybrid) in draw_circles() and terminate nodes at the
belt surface instead of the horizontal build plate
- Add belt floor clipping to organic tree support pipeline with virtual
belt raft layers for sub-floor branch generation, per-layer belt
floor polygons in TreeModelVolumes, and post-generation layer trimming
- Fix pre-existing processing_last_mesh bug in TreeModelVolumes that
prevented m_anti_overhang (support blockers) from ever being applied;
skip empty first layer check for belt printers
Commits:
current approach: make a face surface to build supports to
closer!
supports now terminate on shear plane, now need to get shear plane to correct Z height
nearly there
chasing down logic issues still
committing for checkpoint, this still does not work
still got logic problems...
cull support clipping
stashing changes for now. Going to focus on getting the global shear OFF support generation dialed first.
beginning per object shear calcs
Local shear transform is on correct Z offset now
local shear finally works now and needs more testing
global shear works now, needs thorough testing
debugging non-45 degree angles
debugging part 2
supports at all angles work now
remove debug logging
Add belt floor collision to non-organic tree support pipeline
- Integrate belt floor as a collision surface in TreeSupportData so
branches route around the belt naturally, replacing the explicit
termination checks in drop_nodes()
- Add belt extension layers below the object after draw_circles() to
allow support geometry to extend to the diagonal belt surface instead
of terminating at a horizontal first layer
- Fix coordinate overflow in belt floor polygons (scale_(1e4) exceeds
int32), skip first-layer brim expansion for belt printers, and
extend empty first layer check bypass to all belt modes
add debug logging, Z translate for tree supports
still not seeing any cutoff surface yet
adding debug options
attempt #2 at trees
if hit Z buildplate stop but don't set to_buildplate true
getting closer
tree support almost there, just need to get rid of the circles at the beginning
getting closer
belt / shear plane clip works, need to figure out the buidlplate plane issues
more logic, added debugging logs
supports now extend somewhat below Z=0 in global shear mode
fix bad alloc, add 10mm below build plate
fully works now
shear transform + prusa tree support generation works now.
pull out debug logging
- Implement core belt slicing pipeline: R(-alpha, X) mesh rotation in PrintObjectSlice with corrected object height calculation for proper layer count
Add to_machine_coords() in GCodeWriter to convert slicing-frame coordinates back to machine-frame, propagated through GCode,
GCodeProcessor, and GCodeViewer
Add belt-mode UI: tilted bed visualization, slicing-direction arrow, and raw G-code toggle to switch between machine-frame and slicing-frame views
This is a combination of 6 commits.
checkpoint 1: initial MVP. Slicing functions, but rotates instead of skews are happening and a lot of other stuff too
getting somewhere, getting to the point where I need to figure out how to verify this stuff
this appears to be a dead end.
getting somewhere I think maybe
I'm pretty sure we've completely lost the plot at this point and need to restart this process...
remove slice logic in preparation for new, more invasive plan
Previously, wipe tower behavior was determined by checking if the printer
was a QIDI vendor. This introduces a configurable enum (Type 1 / Type 2)
so any printer can select its wipe tower implementation. BBL printers
remain hardcoded to Type 1. Qidi profiles default to Type 1.
The WipeTower2 code path never called construct_mesh(), leaving
wipe_tower_mesh_data as std::nullopt. GCode export then dereferenced
it unconditionally, triggering an assertion failure / crash.
Wipe tower interface features and preheat fixes
Fresh PR branch rebuilt on upstream/main (squash of origin/BBL-studio-wipe-tower-merge) to avoid merge-history issues.
Sorry had to re-create the PR as I did some chaos in my repo with CLI. xD
Fixes issue https://github.com/OrcaSlicer/OrcaSlicer/issues/10971
Description:
Fix wipe tower filament selection and clean up tool ordering. Added wipe_tower_filament handling to WipeTower2 (store config, mark non-selected tools as “soluble,” and use it in toolchange selection) and ensured the configured wipe‑tower extruder is included in the extruder list for ordering. Removed duplicated/merged tool‑ordering code (extra insert_wipe_tower_extruder definition, duplicate declaration, and redundant reorder block) so the tool order logic runs only once.
<img width="1819" height="799" alt="image" src="https://github.com/user-attachments/assets/cef39026-cf6a-46da-a87a-ef895774699f" />
Port Z Anti-Aliasing from BambuStudio-ZAA (https://github.com/adob/BambuStudio-ZAA)
to OrcaSlicer. ZAA eliminates stair-stepping on curved and sloped top surfaces
by raycasting each extrusion point against the original 3D mesh and micro-adjusting
Z height to follow the actual surface geometry.
Key changes:
- Add ContourZ.cpp raycasting algorithm (~330 lines)
- Extend geometry with 3D support (Point3, Line3, Polyline3, MultiPoint3)
- Template arc fitting for 2D/3D compatibility
- Change ExtrusionPath::polyline from Polyline to Polyline3
- Add 5 ZAA config options (zaa_enabled, zaa_min_z, etc.)
- Add posContouring pipeline step in PrintObject
- Update GCode writer for 3D coordinate output
- Add ZAA settings UI in Print Settings > Quality
- Add docs/ZAA.md with usage and implementation details
ZAA is opt-in and disabled by default. When disabled, the slicing pipeline
is unchanged.
### What was the issue?
The check that validates whether a filament is compatible with the selected build plate type was only executed for Bambu Lab printers.
Other printers skipped this entirely, even though they can also use multiple plate types with different temperature requirements.
This caused cases where:
- incompatible filament/plate combinations went unnoticed,
- users received no warning even when the bed type clearly couldn’t support the selected filament.
### What’s changed?
- The validation block extends beyond BambuLab printers.
- Now all printers get the same compatibility check:
- if a filament requires a bed temperature not supported by the chosen plate,
- Orca shows the same clear error message as it does for BBL printers.
- Show the selected filament preset name (alias if present) in bed/filament mismatch warnings instead of substituting the parent preset.
### Why this helps
- Consistent behavior across all printer brands.
- Prevents invalid filament/plate setups that could cause print failures.
- Makes plate presets more robust and predictable for custom and community printers.
### Notes
- No behavior changes for BBL printers — they keep the existing checks.
- Other printers now benefit from them too.
* The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed
* Merge branch 'main' into main
* Merge branch 'SoftFever:main' into main
* Revert "The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed"
This reverts commit 8d296720b8.
* Update Qidi Q2 0.4 nozzle.json
修改Q2打印高度
* Merge branch 'SoftFever:main' into main
* Merge branch 'SoftFever:main' into main
* change machine_gcode
* Merge branch 'main' of https://github.com/HYzd766/OrcaSlicer
* Merge branch 'SoftFever:main' into main
* Multi-color code compatible with QIDI models
* Merge branch 'main' into main
* toggle axis visibility on canvas (#9666)
* toggle axis visibility on canvas
* set show_axes config on toggle
* fix: Add pause and filament change to machine gcodes for Sovol SV08 MAX (#11214)
* Add fixed Ironing Angle setting for uniform surface finish (#11195)
* Initial working fixed ironing angle implemented with new Fixed ironing angle setting
* update documentation
* Combine Fill.is_using_template_angle and Fill.alternate_fill_direction into Fill.fixed_angle
* Rename SurfaceFillParams.is_using_template_angle to SurfaceFillParam.fixed_angle.
* New materials
* Temps
* Full filament type list
* Improve nozzle temperature range validation messages
Separates minimum and maximum recommended temperature warnings for nozzle configuration + generig °c usage.
Co-Authored-By: Alexandre Folle de Menezes <afmenez@gmail.com>
* Material Updates
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* petg-cf10 should be petg-cf
options.
* Pla reduced range
* Adjust some temps
* FilamentTempType Temperature-based logic
* chamber temps
* Fromatting
* Filament chamber temperature range support
Introduces get_filament_chamber_temp_range to retrieve safe chamber temperature limits for filament types. Updates ConfigManipulation to use these limits instead of hardcoded values.
* add adhesion coefficient and yield strength
Replaces hardcoded material checks for adhesion coefficient and yield strength with lookup functions using extended FilamentType struct.
* Thermal length
* Fix
* Refactor filament type data to MaterialType class
Moved filament type properties and related lookup functions from PrintConfig.cpp into a new MaterialType class.
* Fix adhesion_coefficient
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Alexandre Folle de Menezes <afmenez@gmail.com>
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Joseph Robertson