* Restructured Flashforge process profiles
* Fixed typo in machine profiles
* Changed skirt loops to 2
Based on best practise (other profiles), I have changed the number of skirt loops from 1 to 2
* Add a new brand named Flyingbear
Add a new brand named Flyingbear
Model name: Flyingbear Reborn3
* Update fdm_machine_common.json
fix
z_hop 0,2(2)
* make bed model smaller and set default internal_solid_infill_pattern to monotonic
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* 10-25
Add TPU-95A HF
* 1030
Adding Introduction of Chamber Temperature Control Macros(M191) to Notes
* 1102
Add ABS-GF10 profile，
Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file
* 1106
Add the PA value to some genetic filament profiles
* Update fdm_filament_pla.json
Change the fan rate of begin layers
* Update fdm_process_qidi_x3_common.json
Reduction of top surface particles
* Update fdm_process_qidi_x3_common.json
Add M140 S90 to M191 macro, Preventing slow chamber warming in cold winter environments
* 10-25
Add TPU-95A HF
* 1030
Adding Introduction of Chamber Temperature Control Macros(M191) to Notes
* 1102
Add ABS-GF10 profile，
Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file
* 1106
Add the PA value to some genetic filament profiles
* Update fdm_filament_pla.json
Change the fan rate of begin layers
* Update fdm_process_qidi_x3_common.json
Reduction of top surface particles
* Updating voron profiles
* Add missing V0 configs and add default print profiles
* Update nozzle_diameter for v0, switchwire, and triedent
* Correcting names, nozzle diameters, and adding missing min and max layer heights
* 10-25
Add TPU-95A HF
* 1030
Adding Introduction of Chamber Temperature Control Macros(M191) to Notes
* 1102
Add ABS-GF10 profile，
Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file
* 1106
Add the PA value to some genetic filament profiles
* Update fdm_filament_pla.json
Change the fan rate of begin layers
* Remove retraction_length from common
M5c should never retract more then 0.8mm or it will clog
* Preserve M5 retraction length
Moved previous retraction length from core to M5
* Update Anker M5C retraction length to prevent clogs
Anything beyond a 0.8mm retraction length will clog the printer over time.
* Added correct machine pause code for FlashForge printers
Added machine pause code for Flashforge printers to support pause action in firmware 2.3.6-2.1.9-20231101
* Removed redundant gcodes for Flashforge profiles
Removed redundant gcodes for Flashforge profiles as they are already added by Orca Slicer
