* Run every profile maintenance job from one tool
orca_id_tool.py becomes orca_profile_tool.py, and orca_extra_profile_check.py
and orca_filament_lib.py fold into it as subcommands: check, generate-id, fix,
trim, update-index and update-snapshot. The three scripts already overlapped --
the checker imported half of its rules from the id tool, which in turn kept a
copy-pasted set of output helpers to avoid the resulting import cycle -- while
disagreeing on how a vendor is enumerated, how a JSON file is read and what the
exit code means. One file settles all three.
check, normalize, trim and update-index reproduce their predecessors exactly; normalize and
update-index were diffed byte-for-byte against the old scripts over a copy of
the whole tree. Deliberate changes: the compatible-printers check no longer
switches itself off when --check-materials is passed, an error exits 1 rather
than -1, update-index honours --profile-type and reports a profile it cannot
place instead of dropping it from the index, fix and update-index gained
--dry-run, trim keeps an unindexed file some surviving profile still inherits
from, and vendors are enumerated as directories with an index -- which is why
blacklist.json, a data file that an unscoped index rebuild once wrote four empty
list sections into, loses them here and will not collect them again. The dead
rename_filament_system() helper is gone.
The suite under scripts/tests now covers the maintenance commands too, and CI
runs it; nothing there ran in CI before. No shipped profile data changes apart
from those four keys.
* update vendor index files with "python3 ./scripts/orca_profile_tool.py update-index" and "python3 ./scripts/orca_profile_tool.py normalize"
* fix profile reference for Creality
* fix profile reference for Blocks
* fix profile reference for OrcaArena
* fix profile reference for re3D
* fix profile reference for Chuanying
* fix profile reference for Prusa
* fix profile reference for Wanhao France
* fix profile reference for MagicMaker
* fix profile reference for Afinia
Remove the ABS/ABS+/PLA/TPU/Value ABS/Value PLA filament presets that referenced the non-existent "Afinia H400 Pro" printer. The real printer is "Afinia H+1(HS)", already served by the @HS filament variants.
* fix profile reference for Comgrow
Remove the orphaned "0.20mm Standard @Comgrow T500 1.0" process preset and its process_list entry. Its only compatible printer "Comgrow T500 1.0 nozzle" never existed (the T500 model defines nozzle diameters 0.4/0.6/0.8 only).
* always run check_preset_references
* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
* K2 Plus: add print area bounding box for adaptive bed mesh
The K2 firmware reads MINX/MINY/MAXX/MAXY gcode comments to
determine the adaptive bed mesh area. Without these, it falls
back to full bed mesh even when calibration is enabled.
K2 Pro also reads these comments (its profiles already had them).
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* K2: add print area bounding box for adaptive bed mesh
Same change as K2 Plus — prepend MINX/MINY/MAXX/MAXY gcode comments
so firmware can determine the adaptive bed mesh area.
K2 Pro already had these.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* Creality: bump profile version to 02.03.02.72
Signed-off-by: Igor Mammedov <niallain@gmail.com>
---------
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Fix Ender-3 V3 KE nozzle switching by adding printer_variant
The four Creality Ender-3 V3 KE 0.X nozzle profiles were missing the
printer_variant key, so OrcaSlicer could not map a UI nozzle selection
to a specific profile and reverted every choice to 0.2mm. Add the
matching printer_variant to each, following the CR-10 SE / K1C pattern.
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
* Profiles for Creality K2 Pro printer
Added printer profiles for Creality K2 Pro based on existing K2 Plus profile and Creality Print modifications.
* Fixed filament start g-code for K2 series
K2 Plus filament profiles have additional move for filament start g-code on some filaments. This causes unnecessary moves and make filament profiles non-working on K2 series printers.
As these moves are already mirrored on printer profile and not used in rest of the K2 series they should be removed.
* Update Creality K2 Pro profiles for improved print quality
Added adaptive probing comments to machine start gcode for all nozzle sizes. Adjusted process profiles for various layer heights and nozzle sizes, including changes to bridge speeds, acceleration, wall generator and support line widths according to Creality profiles s to optimize print quality and reliability.
* Revert "Update Creality K2 Pro profiles for improved print quality"
This reverts commit ac84058c33.
* Update Creality K2 Pro profiles for improved slicing
Adjusted speeds, accelerations, line widths, and other slicing parameters for better print quality and compatibility. Updated machine start g-code to include print area comments for adaptive probing (Creality K2 Pro uses these comments to define adaptive probing area)
* add creality ender-5 max
* add filament profiles for ender-5 max
* update creality manifest
* fix references
* put creality.json at 4 space indent
* remove invalid parameters
* fix thumb format
* Merge branch 'main' into feature/ender-5-max
SoftFever