Tiles previously rendered a colored monogram (title/source initials plus an ordinal) with a per-id hue. Show the matching native SVG icon instead:
- AppAction/NativeCommand gain an `icon` field; commands get a curated key->icon table and settings inherit their group header's icon.
- Notebook tracks each page's resource icon name and reports it in tab_options(), so the tab picker can show it too.
- Searcher records the group icon so settings keep it through search.
- Web tile rendering swaps monogramFor/hue for an <img>; drop the now-unused hue/text CSS vars. Add a test asserting every non-empty icon resolves to a shipped SVG.
Five sites carried a hardcoded fallback for imex_tools_per_gantry that had
to match the value registered in print_config_def, with nothing enforcing
the agreement, and several explanatory comments miscounted the sites they
described or cited stale line numbers.
Add imex_cfg_int/_float/_bool/_enum<T> to IMEXHelpers, which return the
value registered for the key when it is absent from the config, so the
registration is the single source and there is nothing left to keep in
sync. Route every read of the IMEX geometry keys through them: 32 call
sites across IMEXZones, PartPlate, GCodeViewer and Tab. The only direct
lookup left is the bail in PartPlate::imex_multicolor_block_reason, which
must not default because it reports a routing conflict and a defaulted
grid would produce a false warning.
imex_cfg_enum uses dynamic_cast on both halves rather than the type()
comparison the others use: every ConfigOptionEnum<T> reports coEnum, so a
type() check cannot tell one enum type from another and would cast a
ConfigOptionEnum<OtherEnum> to the requested T. The ConfigOptionPercent :
ConfigOptionFloat inheritance that rules dynamic_cast out for the float
accessor has no analogue for enums.
Correct the comments that prompted this: the cache-key input list in
PartPlate named five inputs for a nine-part key, the ImexMarkerKey note
in GCodeViewer called imex_tool_layout an input only the preview reads
when the plate keys it too, and four file:line citations pointed at the
wrong lines. Values are unchanged at every converted site; cache key
strings keep their existing representation.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
No IMEX code upstream, so nothing in this merge touches the feature. All 21 overlapping
files auto-resolved; verified every upstream addition is present in the merged tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Closes review comment 10.
`461c69c83e` settled this in April — IMEX internally, IDEX/IQEX as the user-facing label — but the
UI strings were never converted. Every translated string naming the feature now reads IDEX/IQEX:
41 occurrences across the printer and process option labels and tooltips, the modes editor, the
plate mode indicator, the pre-slice warnings, the placement refusals and the slicing errors. The
reviewer listed eight; the rest were in the same class.
Nothing else moves. The config keys keep the `imex_` spelling — `is_imex`, `imex_mode_names`,
`imex_parallel_mode` and the rest are on-disk format in existing printer presets and 3MF projects,
so renaming them would break every profile and project already saved. C++ identifiers, filenames,
comments and test names keep IMEX as well: it stays the internal name of the subsystem, which is
what covers the topology space (one gantry with 2-4 tools, 2x1 and 2x2 grids) that neither acronym
names on its own. Where a tooltip quotes a key, the key spelling is preserved and only the feature
word around it changed.
The `is_imex` tooltip is reworded rather than substituted: it already named the hardware families
parenthetically, so a literal replacement would have said IDEX/IQEX twice in one sentence.
No translation impact — no IMEX string had reached OrcaSlicer.pot or any catalogue, so there is
nothing to migrate. One test asserted on the old error text and now matches the new one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Closes review comment 9.
PartPlate::reset_imex_mode() had no callers, while the PR description said
deleting a mode resets affected plates to Primary. IMEXModesCtrl now exposes an
on_mode_removed callback that TabPrinter::build_fff handles by resetting every
plate whose mode matches the deleted row, under a single undo snapshot, followed
by the same dirty/update sequence the plate's own mode button runs.
Wired to deletion only, on purpose: the name field notifies on every keystroke, so
routing renames through the same path would orphan and reset the plate on the
first character typed. Renames stay covered by the slice-time fallback and its
warning. The callback is copied to a local before notify(), because notify()
reaches load_from_config() -> clear_rows(), which tears down the row the handler
is running inside.
The rest of this file is the modes editor moving out to its own translation unit,
leaving the include and the construction site.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Keep mixed-color filaments intact when the extruder count changes
The extruder-count spinner resized the filament arrays in bulk at the tail,
which is where mixed-color slots live, so a new filament landed behind the
mix and the sidebar skipped a slot number. It now adds and removes one slot
at a time through the same calls the sidebar's +/- buttons use, so a new
slot opens ahead of the mixed tail and a removal renumbers object filament
ids, painted facets, custom g-code and mixed components rather than
clamping them away.
Drops the vector overload of set_num_filaments(), which this leaves without
callers.
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Upstream replaced MainFrame's fixed-index TabPosition enum with string-based
page ids ("feat: refactor notebook/tabs to be string based instead of fixed
index based"). The IMEX toolhead-visibility menu item was the only consumer of
that enum left on this branch, so its enable check now compares
m_tabpanel->GetSelectedPageName() against TAB_ID_PREVIEW -- the same form the
neighbouring upstream menu items use.
That mismatch is what broke CI: the branch built on its own, but the merge
commit CI builds no longer had TabPosition declared. No other conflicts.
666/666 tests pass in Release.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(GUI): honor "Ignore" when layer height exceeds the configured maximum
Entering a layer height above the printer's max_layer_height on the Print
Settings tab fired two guards in sequence. Tab::on_value_change prompts
"...Adjust to the set range automatically?" with an Adjust/Ignore choice, and
ConfigManipulation::update_print_fff_config then showed an OK-only "Too large
layer height. Reset to X" dialog whose result was never checked, so it always
reset the value. The second guard overrode the user's "Ignore", resetting the
layer height regardless.
Changes:
- Extract the shared Adjust/Ignore dialog into
ConfigManipulation::layer_height_out_of_range_dialog, reused by the tab
(Tab::on_value_change) and the per-object/part settings panels. The dialog now
names the value it will clamp to and reads correctly for too-low as well as
too-high.
- The tab/plate path is already covered by Tab::on_value_change, so the
duplicate reset is dropped from update_print_fff_config.
- The per-object/part panels have no on_value_change hook, so add
ConfigManipulation::check_object_layer_height and call it from the object
settings update paths, gated on the edited option (changed_opt_key ==
"layer_height"). It prompts once per layer-height edit and does not re-prompt
when unrelated object settings change after the user chose "Ignore".
Fixes#14214
* refactor(GUI): unify the layer-height range check across tab and object panels
Copilot review of #14369 noted that the per-object check only guarded the
max at extruder 0 and skipped the too-low case, diverging from the tab.
Move the whole range check into ConfigManipulation::check_layer_height,
used by both Tab::on_value_change and the per-object/part panels. It takes
the widest [min, max] window across the printer's extruders, offers
Adjust/Ignore in both directions, and resets a near-zero value. The tab's
inline block collapses to one call, dropping the duplicated limit logic.
* fix(GUI): only enforce layer-height limits that are actually set
max_layer_height defaults to 0 (unset), so the unconditional range check
offered to clamp any layer height to 0 on presets that don't define it.
Guard each branch (near-zero, too-high, too-low) so an unset limit disables
that direction; the slice-time nozzle-diameter check still applies.
Also run check_layer_height before update_print_fff_config in the object
panels so a near-zero per-object value prompts the same way the tab does,
with update_print_fff_config's fallback still covering the no-minimum case.
update_fff() zeroed any build_plate_tilt matching the dormant belt-derived
tilt (default X/45) within 0.01, wiping a legitimate manual tilt on a
non-belt tilted-bed printer. Track the belt->non-belt transition and the
exact values belt-sync wrote, clearing only those on an in-place toggle;
reset tracking on preset load so preset switches never wipe tilt.
"Leading edge only" describes where a part meets a moving belt, so it has no
meaning on a fixed bed and should not clutter the Brim type dropdown there.
Filtered the same way support_style and wipe_tower_wall_type already are a few
lines above in TabPrint::toggle_options(): the field holds its own copy of the
option definition, and Choice maps the combobox selection straight onto that
copy's enum_values, so rewriting the values, the labels and the combobox items
together keeps the mapping correct.
The entry is kept when it is the current value, so opening a project that uses
it on a non-belt printer cannot leave the control displaying an option it does
not offer - which would silently rewrite the setting on the next edit.
Print::validate() already warns that it prints as an ordinary outer brim there.
Matches the scope of the existing precedents: the per-object override panel is
not filtered.
A belt printer slices in a rotated frame, so the belt surface is a tilted
plane rather than the Z=0 bed plane. Each slicing layer touches the belt
only along a narrow strip at its leading edge - about 0.2mm at 45 degrees -
so a part's first layer is really a first line, with almost no contact patch
to hold it down while the belt drags it forward. Brim was hard-disabled on
belt printers, leaving no remedy at all.
Generate the brim on the belt plane instead. The object's belt footprint is
the union over layers of each slice clipped to that layer's contact band; the
brim is offset from it in a "flattened" frame where the shear axis is
stretched by 1/cos(tilt), so ordinary Clipper offsets measure true on-belt
distance. It is emitted as cross-belt lines, one per layer band, anchored to
a fixed fraction of the band so every line shares a nozzle-to-belt clearance
and therefore comes out the same width; flow is matched to the resulting band
pitch, keeping the sheet uniform and gap-free.
Three new controls, all belt-only:
* Leading brim length - extends the brim ahead of the part along the belt,
on every downhill-facing edge of its contact area. This apron necessarily
prints BELOW the object's first layer, since layer 0 is the part's leading
contact, so it needs brim-only bands of its own.
* Extra brim width - widens the brim sideways across the belt only.
* Brim type "Leading edge only" - brim at the part's first belt contact and
nothing after it. Appended last in BrimType so no existing value shifts;
degrades to an outer brim off belt printers, with a warning.
The apron bands are lightweight records rather than a Layer subclass, so no
fabricated Layer::id() can leak into initial-layer temperature selection, the
spiral vase probe, cooling or gradual interpolation. They are generated in
posSupportMaterial because their print_z values must exist before ToolOrdering
is built at psWipeTower, and they are emitted from a short dedicated branch in
process_layer that runs before any layer pointer is dereferenced.
The footprint is closed before offsetting outwards: a belt contact patch is
often a broken-up strip, and the merged offset rings of two islands closer
than 2 x brim_width would otherwise fill the space between them - space that
lies under the part.
Also fixes a pre-existing bug where PrintObject::get_first_layer_bbox()
overwrote a valid bbox with an unassigned one on any belt printer with a brim
configured, because has_brim() was true while make_brim() returned early.
Belt brim is refused alongside the prime tower and spiral vase, and requires
one instance per PrintObject - translating an instance along the belt axis
changes its physical belt-floor Z. Untilted belt printers are unchanged: they
still get no brim, since the plate brim is emitted out of skirt_brim_groups(),
which _make_skirt() never builds for a belt printer.
Adds a printer option that picks up the new tool without a blocking temperature
wait, travels to the wipe tower, and waits there right before purging, parked
beside the tower so the ooze from the heat-up lands next to it rather than on the
model. The incoming filament's target is raised ahead of the tool change, so the
heat-up overlaps both the change itself and the travel to the tower.
Off by default, and only offered for multi-extruder printers using a Type 2 wipe
tower; the generic toolchanger profile enables it.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
Lam Wei Lun