* fix: guard H2C per-filament array reads against short config arrays
The H2C tool-ordering, wipe-tower, and g-code export paths index per-filament
config arrays by filament/tool id. A config with fewer entries than the filament
count (partial or legacy projects, minimal test configs) makes these reads run
past the end of the vector: silent under a normal STL, but UB that aborts under
the flatpak build's bounds-checked STL (_GLIBCXX_ASSERTIONS).
Route the reads through the existing clamping accessors (get_at,
get_filament_category, is_in_same_extruder) and add a small clamp helper for
filament_change_length. The guards are no-ops when the arrays are sized to the
filament count, so correctly specified configs are unaffected.
* fix: size the grouping context's filament_info to the filament count
build_filament_group_context built model_info.filament_info by walking
filament_type, so a config whose filament_type is shorter than the filament
count produced a short vector. FilamentGroup indexes filament_info by filament
id, so clamping the individual reads only moved the out-of-bounds access
downstream. Loop to filament_nums and read all three fields through get_at,
and drop filament_ids entries past the filament count, since the grouping code
pairs filament_ids and filament_info by position.
Adds a regression test with four filaments and one-entry filament_type /
filament_is_support. Without the fix it throws bad_alloc from copying a garbage
std::string read past the end.
* fix: guard the carousel nozzle-change length reads too
The carousel branch added in b90ac13d86/b0dddb4648 reads
m_filaments_change_length by tool id without a bounds check, the same
pattern this branch already routed through filament_change_length_at
a few lines above in both plan_toolchange and plan_tower_new.
* fix: guard WipeTower per-filament array reads against short config arrays
The BambuStudio WipeTower sync reintroduced raw per-filament array
indexing that reads out of bounds when a config leaves an array shorter
than the filament count: m_physical_extruder_map in format_line_M104/M109
(indexed even when empty), and m_filament_categories in get_wall_skip_points
and get_wall_filament_for_all_layer. Silent on a normal STL, a hard abort
under the bounds-checked STL the Flatpak build uses.
Bounds-check the physical extruder map before indexing (omitting the T
token, as the existing -1 path already does), and route the two raw
m_filament_categories reads through the clamping get_filament_category()
accessor the surrounding code already uses. No change for correctly-sized
configs.
build: clear eleven single-site clang-cl warning categories
Each of these is the last site left in its category, and every one is the
compiler saying it cannot tell what the code meant. Nothing here changes
defined behavior.
- OrcaSlicer_app_msvc.cpp printed a DWORD with %d
- StackWalker.cpp ran delete[] through an LPVOID
- ToolOrdering.cpp used a bare ; as a deliberate skip loop's body
- WipeTower.cpp had finish_block_tcr = finish_block_tcr, so the branch that
reached it did nothing. Folding the condition into the enclosing if leaves
the other branch untouched
- GCodeProcessor.cpp had an else binding to the inner if while the outer if
carried no braces
- AmsMappingPopupUpdate.cpp wrote >= 1 || <= 3 where its own comment says &&
- CalibrationWizardPresetPage.cpp left max_decimal_length unset through a
pair of conditions that cover every value but not visibly so
- DevManager.cpp bound map elements to pair<K, V> rather than
pair<const K, V>, copying every one
- SyncAmsInfoDialog.cpp had extraneous parentheses around a comparison
- Http.cpp had if (speed > 0.01) speed = speed;. speed now starts at 0 as
well, because curl_easy_getinfo leaves the target untouched when it fails
and the value reaches Progress either way
- SnapmakerPrinterAgent.cpp truncated npos into an unsigned int, so the
!= npos guard was always true. A colour with no # still yields 0, because
the wrap produced 0 as well
Nine categories go to zero. -Wtautological-overlap-compare and
-Wsometimes-uninitialized reach zero when #15583 merges their second site.
When the per-layer filament selector (enable_filament_dynamic_map)
migrates a filament across nozzle variants (e.g. Standard -> High Flow),
the config write-back only stored the derived extruder map; every
per-variant filament value (retraction, nozzle temperature, flow,
flush...) kept the numbers resolved from the pre-slice static mapping.
Now both dynamic write-back sites (the by-layer branch and the
sequential stitch) branch on the result's dynamic support. Migrating
results run a mixed-filament expansion that regathers every
filament_options_with_variant key from the pristine per-variant
superset, giving a migrating filament one config slot per (extruder
type x nozzle volume type) it lands on - filament_self_index,
filament_extruder_variant, and all value arrays grow in lockstep - and
recompute the retract overrides with per-slot machine indices so a nil
slot falls back to its own variant's machine value. Non-migrating
dynamic results take the merged three-map write-back so re-applies
reproduce from the written maps. Unrouted filaments resolve from the
result's own default map, so slot resolution never depends on
filament_map round-tripping through the plate config.
Print::apply reproduces the identical expansion from the persisted
group result (shared dedupe helper, expansion function, and slot
indices on both sides): the expanded keys sit in the psWipeTower /
psGCodeExport invalidate lists, so without the reproduction every
re-apply after a selector slice would diff non-empty and permanently
invalidate. cal_non_support_filaments now resolves the extruder per
layer from the published result for dynamic groupings.
filament_map_2 keeps its apply-time static derivation; nothing on the
dynamic path reads it (the per-slot machine indices key the override
merge), and per-(extruder x volume-type) machine limits in the g-code
processor remain a documented follow-up.
Every change is gated behind is_dynamic_group_reorder() or a persisted
result with dynamic support; no profile sets the flag, so the static
fleet's instruction stream is unchanged (20/20 pinned-slice byte gate
identical, incl. the sequential repro sliced twice, deterministic).
Tests: expansion unit coverage (migrating slots, unrouted fallback via
the default map, mis-sized volume map ignored, nullable retract keys in
lockstep, slot machine index layout), an end-to-end stub-driven
write-back asserting expanded slots, per-layer config-index resolution,
the override merge incl. the nil-slot variant fallback, and re-apply
stability, plus a real selector slice staying valid across re-apply.
Suites green (libslic3r 48987/168, fff_print 633/60).
Sequential (by-object) prints were incoherent with the per-layer filament
selector (enable_filament_dynamic_map): the by-object branch published a
static grouping while each per-object ToolOrdering independently ran the
dynamic planner from an empty nozzle status and wrote its own map to the
config (one write per object, last object wins). The exported toolchange
sequences then disagreed with the published result that drives the
per-layer maps, placeholders, and selector emission.
Now the by-object branch, when the selector is enabled, plans each unique
object once — threading the physical nozzle occupancy and the previous
object's last filament into the next plan — stitches the per-object
per-layer nozzle maps into one print-wide result (gap-filled by the new
normalize_nozzle_map_per_layer so any layer index resolves a filament's
nozzle consistently), publishes it, and writes the derived extruder map
back once. The plans are cached on the Print and g-code export consumes
the cache: the ToolOrdering seed changes the plan input (dontcare
assignment, first-layer reorder), so a fresh export-time construction
could re-plan differently from the published stitch. The per-object
dynamic write-back is gated off for sequential prints.
Every change is gated behind is_dynamic_group_reorder(); no profile sets
the flag, so the static fleet's instruction stream is unchanged (20/20
pinned-slice byte gate identical, incl. the by-object repro sliced twice).
Tests: normalize unit coverage (carry-forward, back-fill, ragged input),
stitched-blocks selector detection, and an end-to-end by-object selector
slice (apply -> process -> export) asserting the published stitched
result, one cached plan per object, the config write-back, and a clean
export. Suites green (libslic3r 48958/165, fff_print 633/60).
The Print-level LayeredNozzleGroupResult had a single producer, the
by-layer branch of ToolOrdering, which is gated to non-sequential prints.
The by-object branch in Print::process computed a grouping only in auto
map modes and never stored it, so a sequential slice exported with a null
group result: the per-nozzle placeholder tables came up empty and any
start g-code indexing nozzle_diameter_at_nozzle_id[] aborted with
"Indexing an empty vector variable". A prior by-layer slice masked the
bug by leaving its (never cleared) result on the Print.
Now the by-object branch runs get_recommended_filament_maps in every
static map mode (in manual modes the result mirrors the user's
assignment, deviations throw as in by-layer) and publishes it
print-wide. The config write-back stays gated to auto modes: in manual
modes it would only re-store the pre-slice values.
Regression test: a two-object by-object print must publish a non-null
group result and resolve nozzle_diameter_at_nozzle_id[] in start g-code
(both fail without the fix). Suites green (libslic3r 48929/162,
fff_print 633/60); 18-fixture byte gate identical; the by-object repro
project goes from the export error to valid g-code, determinism x2.
- the g-code writer tracks the current layer id and resolves
FILAMENT_CONFIG/NOZZLE_CONFIG (plus every non-macro variant lookup,
toolchange placeholder scalars, and the change-filament flush
overrides) through Print's per-filament, per-layer config-index
resolvers instead of the filament->extruder collapse
- update_layer_related_config refreshes the per-layer
extruder/volume/nozzle maps in the writer config;
update_placeholder_parser_with_variant_params remaps the
filament-variant arrays into filament-id space for custom g-code
(Orca's flush placeholder computation moves inside it)
- the engine's concrete per-filament volume assignment now merges into
the config write-back (the temporary hold from the producer commit
is lifted together with these consumers), and the background process
reads the computed volume map back to the plate
- append_full_config dumps the resolved filament_map_2 slots
- update_used_filament_values gains a bounds guard
- tests: per-filament Hybrid slot resolution + null-result fallback
Result: on a Hybrid extruder, each filament's features slice with its
assigned sub-nozzle's variant values (speeds, volumetric limits,
retraction). Verified on a 4-filament H2C Hybrid project: outer walls
split into three feedrate populations (30/50/200 mm/s), toolpath
geometry byte-identical, deterministic across repeated slices. All 18
non-Hybrid reference fixtures stay byte-identical except the
filament_map_2 header value now showing the real slot. Auto grouping
ties (multiple zero-flush perfect matchings) may pick a different
filament-to-nozzle isolation than other slicers; verified co-optimal.
- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
- Print::get_nozzle_config_index / get_filament_config_indx resolve a
filament's variant slot per layer from the nozzle group result, with
hashed index caches; when no group result is published (sequential
prints), they fall back to the static filament->extruder mapping so
behavior is unchanged
- filament_map_2 caches each filament's resolved print-variant slot;
rebuilt in Print::apply after the filament_map diff handling and in
the filament-map write-back
- filament retract overrides now key by slot indices: apply_override
fallback indexing flips to 0-based, Print::apply passes
filament_map/extruder indices, the write-back passes filament_map_2
(identical resolution while slots equal extruders)
- filament_volume_map/filament_nozzle_map/filament_map_2/
filament_self_index become PrintConfig static members (required for
member access); grouping input guards tightened so their registered
1-element defaults are never mistaken for real per-filament maps
(single-filament manual mode keeps the mix-marker fallback)
- update_filament_self_index_cache refreshed at every full-config
assignment
- tests: 0-based apply_override fallback, get_config_index_base
hit/miss/mixed-type cases
The resolvers are not consumed by the g-code writer yet. Non-Hybrid
g-code is unchanged except the config header, which now serializes the
three new static keys (defaults until the per-filament producer lands);
verified by the 19-fixture byte gate: 3 added header lines per fixture,
zero motion changes.
Filament grouping already consumed per-filament forbidden nozzle volume
types, but every call site passed an empty map, so a variant-restricted
filament (e.g. one limited to "Direct Drive TPU High Flow") could be
auto-grouped onto an incompatible nozzle flow type on multi-variant
printers.
- add convert_to_nvt_type() to parse extruder variant strings
- add Print::get_filament_unprintable_flow(): forbidden volume types =
printer extruder variants minus the filament's declared variants;
filaments declaring no variants stay unrestricted
- feed the map into grouping at the by-object path (Print.cpp) and all
six mapping/planning sites in reorder_extruders_for_minimum_flush_volume
- unit-test the string parser
Non-restricted configurations produce an empty map, so existing
printers' grouping and g-code are unchanged.
* fix: out-of-bounds read computing tool-ordering max layer height
calc_max_layer_height() loops over the extruder count (nozzle_diameter)
but indexes max_layer_height with the same counter, reading past the end
when that array is shorter. Silent on release builds, aborts under a
bounds-checked STL (_GLIBCXX_ASSERTIONS).
Read via get_at(), which falls back to the first entry when the index is
out of range, as Slicing.cpp already does for this option.
Add a fff_print regression test slicing a two-extruder printer with a
single-entry max_layer_height.
* docs: clarify how max_layer_height ends up short in the regression test
Normalization sizes it to the filament count under single_extruder_multi_material,
not "a mismatch a profile can ship" as the earlier comment guessed.
Previously, wipe tower behavior was determined by checking if the printer
was a QIDI vendor. This introduces a configurable enum (Type 1 / Type 2)
so any printer can select its wipe tower implementation. BBL printers
remain hardcoded to Type 1. Qidi profiles default to Type 1.
Sorry had to re-create the PR as I did some chaos in my repo with CLI. xD
Fixes issue https://github.com/OrcaSlicer/OrcaSlicer/issues/10971
Description:
Fix wipe tower filament selection and clean up tool ordering. Added wipe_tower_filament handling to WipeTower2 (store config, mark non-selected tools as “soluble,” and use it in toolchange selection) and ensured the configured wipe‑tower extruder is included in the extruder list for ordering. Removed duplicated/merged tool‑ordering code (extra insert_wipe_tower_extruder definition, duplicate declaration, and redundant reorder block) so the tool order logic runs only once.
<img width="1819" height="799" alt="image" src="https://github.com/user-attachments/assets/cef39026-cf6a-46da-a87a-ef895774699f" />
1. Sometimes the first layer is too small and does not have enough space to extrude.That will make first layer extruders empty
jira: STUDIO-13030
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I69b99ab74101c772f4c91e955060e403988bb91c
(cherry picked from commit 9699397858c6d52d027e79e91041a9dac7280bba)
1. Try to merge filaments before grouping
2. Set max match num for machine filamnet in match mode
jira:STUDIO-10392
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2451d838e07ee02f493fda4dc702f3d13b2ad37b
(cherry picked from commit d15fc37ff2fa048e38a0b132bb3ae525ff666fab)
1. Add filament_is_support field. Format the filament type
2. Optimize machine filament info logic
jira:STUDIO-10326
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia8bfc37095339e73c98209b4e3f1e0804e511e88
(cherry picked from commit 001144400b841629439a890d46fa40a7296689ba)
and add most used_extruder for print by object
jira:none
Change-Id: I021069e865992828b098d73c0d704ba7edbd55d8
(cherry picked from commit ae62f7b8e4b4258318c0d941963eddfb70e86c15)
1. Detect unprintable area for extruder when slicing
2. Always do filament map again if object pos changed
jira:STUDIO-9473
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic01b8be8e3b08ba6b34efb2d3c451c9e985a03e8
(cherry picked from commit f1445ff0477795e9baf3792348ff27d79ee2308c)
Kris Austin