The Storage tab's list/metadata/delete went over OrcaSonar's Moonraker
façade, so they failed when the façade was disabled. Send the files.* MQTT
commands on the LAN connection instead - the same transport OrcaCloud uses -
and match replies by sequence_id.
Thumbnails still use the façade (no MQTT equivalent); gcode upload is
unchanged.
OrcaSonar's /mqtt WebSocket proxy writes each ~8 KiB TCP read as its own
WebSocket binary message, so an MQTT packet larger than one read (e.g. a
files.list reply) spans several messages, and several packets can arrive in
one. OrcaMqttConnection assumed exactly one packet per message, so packets
that spanned messages were dropped and the request timed out ("Load failed").
Keep a per-connection byte buffer and extract complete packets by their
remaining-length header, dispatching each. A malformed header (or a declared
size past a 16 MiB cap) drops the connection so the worker reconnects rather
than buffering forever.
The device drying options hold several values per filament, as many as
the filament preset gives, and a project stores them as the filaments'
values one after another. The CLI filament merge wrote them like an
option with one value per filament, putting each preset's first value at
the filament's own index, so a project with three filaments whose preset
gives "1", "0" was exported with 1;1;1;0;1;0 where the GUI writes
1;0;1;0;1;0.
The merge now leaves these options out of the per-filament pass and
rebuilds them afterwards from every filament's values in slot order.
Without a fixed number of values per filament one slot cannot be
replaced in place, so the stored values are kept when any slot has no
config to rebuild from.
A project's listed settings are carried onto its base preset by update_non_diff_values_to_base_config, which matched variants by exact name and id. A variant the base gained after the project was saved got the base's value, while the same value in a user preset now falls back to the preset's first variant of that extruder. So an old project opened with its printer preset already modified, and saving it wrote the base's values into the 3MF.
The function now maps variants with map_variant_indices, as update_diff_values_to_child_config does: a base variant the project does not list takes the project's first variant of the same extruder. The variant lists themselves stay the base's, so a fallback never writes one variant's name over another's.
The 02.08.02 series appended queue_plate_id to PrintParams and nothing
after it changed the ABI OrcaSlicer calls, so adding the field brings
the current layout up to 02.08.04. Make 02.08.04 the latest series and
drop 02.08.01 from the whitelist: its PrintParams no longer matches, and
its malformed bind table is refused by dyld on macOS 27, so it cannot
load there. A stored 02.08.01 falls back to the latest series through
the existing unsupported-version path.
151 using-directives, using-declarations, type aliases and namespace
aliases in source and test files that nothing refers to: the name is
never used, it duplicates a using already in scope, or the code sits
inside the namespace it names. Each one was removed on its own and the
file still compiled, both as it is and with every header-level using
taken away, so none of them was only redundant because a header leaks
the same name.
With the using gone, 28 #include lines and one forward declaration had
no other reference left in their file (boost/optional.hpp without any
optional, property_tree headers without any ptree) and go with it.
No header is touched.
* perf: write post-processed G-code without a per-line copy
* perf: size the post-process line map from the first pass
* test: line ends of the exported G-code
* test: include the headers the line-ends test and gcode() helper use
The XY, XZ and YZ planes no longer cross through the bed. Each is a small square in its axis
colour, set off from the axes into the corner that faces the default front view, with its name
written in the plane. Dash-dot axes run between the squares and replace the bed's axis triad
while they show. Hovering a plane greys it and selecting one makes it solid, and picking a
solid face now clears a previously picked plane.
Grabbing an arrow anywhere along its length snapped the body's centre to that point as soon
as the mouse moved. The body now moves by how far the cursor travels from where the arrow
was grabbed, including when it is grabbed while looking straight down the axis.
The XY/XZ/YZ planes are cut along each other and drawn back to front, with
lines along every crossing, and their fills are strong enough for the order
to show. Before, they blended into one grey smear and were too pale to work with.
In the Design tab the button always swung the camera to the plate view and framed the whole
bed, whatever was selected: the tab's picks and sketches are neither the canvas's selection
nor its volumes. It now frames the selected faces, body, edges, vertex, sketch region or
sketch entities, and with nothing selected everything on show — the visible bodies, the
feature preview and the sketches — keeping the current view direction. An empty tab still
frames the bed as before.
Follow-up to the feature/OrcaSonar review. Scopes the new behavior to the
OrcaSonar agent, fixes several AMS-sync and lifecycle bugs, and makes the
MQTT tests run in CI. Non-OrcaSonar agents keep their existing behavior.
## Changes
Discovery
- Gate the background SSDP scan to a configured OrcaSonar machine instead of
running for every non-BBL profile; drive discovery on demand from the
machine-select popup and back off idle rounds from 5s to 60s.
- Add NSLocalNetworkUsageDescription and NSBonjourServices to both macOS
Info.plist templates.
AMS sync
- Resolve id-less printer-set trays by material type in get_ams_cobox_infos
and the sidebar badge loop, matching sync_ams_list, so combo arrays and
badges stay aligned.
- Keep a printer-set tray that resolved by type out of the "unknown or
incompatible filaments" dialog.
AMS device UI
- Gate the "Empty" tray classification, and the editable temperature fields,
to the OrcaSonar agent; Bambu keeps "?" and read-only presets.
- Validate AMS material temps on confirm: reject out-of-range values and
min > max before the command is sent.
Storage tab
- Bind the show/hide handler on the panel's ancestors (StoragePanel and
MonitorPanel) and unbind on destruction, so the Bambu file system stops
when the tab is left.
Transport
- Load /etc/ssl/cert.pem on macOS in add_platform_root_certificates, after
set_default_verify_paths.
- Release lifecycle_mutex before start()'s connect wait so stop() can cancel
the attempt and signal completion instead of stalling the UI thread.
Localization
- Add OrcaFilesPanel.cpp to list.txt and regenerate the catalogs.
## Tests
- Un-hide the loopback MockBroker integration tests (ephemeral port, no
network) so ctest registers and runs them.
- Mock broker tracks SUBSCRIBE/UNSUBSCRIBE and delivers push_report only to a
subscribed topic; the reconnect test asserts the re-SUBSCRIBE.
- Add bbl empty-tray cases, an AMS combo-alignment case, and unknowns
assertions to the AMS sync tests.
Resolve the filament list's printer model from the agent-reported model id or the selected printer profile, so the AMS Materials Setting dropdown and its Confirm button work on OrcaSonar. Third-party trays pre-fill and allow editing their temps, and the popup's initial selection no longer overwrites them.
Render explicitly-empty trays as "Empty" instead of "?" using a wire-derived DevAmsTray::is_empty, while keeping the slot editable.
Hide the flow-dynamics K/N controls for non-Bambu agents — tile, dialog, validation and sends — with Bambu behavior unchanged.
Tests cover model resolution, the K/N gate and empty-tray classification.
Drop the index-correlation gate so mapped prints are gated only on the filament_mapping capability
Resolve AMS trays set on the printer UI to the matching Generic preset using their material type and color
Skip the forced external-spool selection on printers without an AMS and add coverage for the mapping gates
Parse connector-scope capabilities from get_capabilities: supported_features, capabilities.protocol.features and supported_commands are read for orca devices even when the reply has no flags block, reset before each parse, and left untouched for Bambu.
Gate macro-backed AMS commands on fms plus the advertised command (change filament, select tray, control, user settings, RFID, drying stop); gate slot metadata writes on filament_slots. Unknown capability is not support.
Serialize PrintParams::ams_mapping2 into print.gcode_file.filament_mapping with the array position as filament_index and {255,255} dropped. The field is omitted when empty, so an unmapped print stays byte-identical. A mapped print is refused visibly while ORCA_FILAMENT_MAPPING_CORRELATION_VERIFIED is false or the connector did not advertise filament_mapping; the GUI predicate shares the serializer's definition so both gates agree. Refuse a partially mapped print that leaves a used filament without a target.
Return a non-success result from start_local_print_with_record so PrintJob falls back to start_print instead of treating an unsent print as success.
Tests cover serializer keying and omission, GUI/agent gate agreement, payload shape, the with_record result, capability parsing, and the per-command AMS gate.
* Remove Unused Project Includes and Forward-Declare Where a Type Is Only Referenced
Generated with include-what-you-use and applied conservatively. Only OrcaSlicer's own headers, the ones under src/ and tests/, are removed or forward-declared; standard-library and third-party includes are left alone. An include is removed only when both the Release and the Debug configuration leave it unused, never from inside a conditional block, and never from a file with platform-specific blocks, which only gain includes. Files whose only use of a header sits behind a feature or debug macro (libvgcode's OpenGL ES and marker code, the ARACHNE/TESTS_EXPORT_SVGS debug output) keep their includes.
clonable_ptr.hpp gains #pragma once; it had no include guard and was only safe while Config.hpp was its sole includer.
* Remove Unused Project Includes From Files With Platform-Specific Code
A Linux include-what-you-use run cannot see the code inside _WIN32, __APPLE__ or __linux__ blocks, so its verdict is only taken where nothing the removed header declares, directly or through what it includes, is named inside those blocks. Removals also have to hold in both the Release and Debug configuration and never touch a line inside a conditional block.
* Restore the libslic3r Precompiled Header and Direct Includes Lost in the Platform Pass
The platform-file pass treated pchheader.hpp as an ordinary header and
emptied it, and left GUI_Preview.hpp and 14 other files relying on
headers they no longer reached directly.
* Restore MainFrame.hpp in ParamsDialog.cpp for the Windows-Only Reparent Call
* Include Headers That Files Reached Through Ones the Cleanup Removed
* Drop Includes Duplicated by the Cleanup or by Main's Own Additions
* Leave PreciseSeam.cpp as Main Has It After the Precise Seam Rework
Selections are drawn as opaque faces in the selection colour with a cased outline instead of a
translucent tint over the body, so they read on a body of any colour. Selecting a Feature tree
row lights the faces that feature made rather than its whole body, which also makes fillet and
chamfer rows highlight again.
perf: skip estimating curled walls when nothing reads them
The curled extrusion estimate ran whenever a region had overhang speed on,
which is the default, but only the slowdown for curled perimeters reads the
curled lines it produces, and that slowdown is off by default. The step now
also requires a region with the slowdown on, and clears the curled lines
when it skips the estimate, so none are left from an earlier slice.
Also fixes stale fan commands due to the stale curled lines on the reused layers.
Every file that included STEP.hpp, directly or not, got namespace fs = boost::filesystem at global scope, and 29 sources and three headers relied on it without saying so. Headers now spell out boost::filesystem, and each source that uses fs declares the alias itself.
Lam Wei Lun