Adds SketchEngine::make_bridge (4-pole cubic Bezier, G1-tangent to Line/Arc
endpoints, straight-line fallback for other types) emitted as the existing
BSpline SketchEntity — no new geometry type, no serialized-field change, golden
recipe fixture untouched. CadDocument::add_bridge appends it (non-parametric,
index-validated, throws on bad refs). MCP `bridge` method mirrors action_project.
4 new [CadDocument][bridge] tests; full kernel suite green (76 cases, 1280 asserts).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Onshape-style "Use / Convert entities": pick edges (or a whole face) of an
existing solid and get sketch geometry projected onto a target plane, then
extrude/revolve/edit it like any sketch. Parametric: apply_project re-derives
the feature's entities from the source body on every recompute, so editing the
source updates the projection.
Line edges -> Line entities (exact); circles/arcs whose plane is parallel to
the sketch plane -> Circle/Arc (exact); everything else (incl. non-parallel
circles that project to ellipses) -> sampled Line chain.
Append-only: new enum value Project + project_source_body/project_edges/
project_face fields at the end of save/load; recipe version stays 2. Recompute
loop made non-const solely so apply_project can write back f.entities.
Suite 67->71 cases, 1178->1229 assertions, RC=0. Fixture 25493->26835 B.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Split-by-face reuses the existing Cut feature rather than adding a new type:
two appended fields (cut_face_body, cut_face) let apply_cut derive the cut
plane from a picked face via SketchPlane::from_face when cut_face >= 0,
otherwise it keeps using the base `plane`. cut_offset / cut_flip still apply
along the derived normal, so the same square-wire split machinery handles
both cases. add_split_by_face() is the convenience entry point; MCP gains a
`split` method (body / face_body / face / keep_upper / keep_lower).
Serialization stays append-only — cut_face_body, cut_face appended to
save/load, recipe version unchanged at 2.
Tests: the previously-missing both-halves plane cut (keep_upper && keep_lower
=> two bodies whose volumes sum to the original), split-by-face via a
top-face plane offset into the interior, keep-upper-only, and a round-trip.
Golden fixture regenerated with a GoldenSplit cut-by-face feature and exact
field-value assertions. Suite 63 -> 67 cases, 1119 -> 1178 assertions.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Pick a face of an existing body, offset it by a wall thickness along its
normal, and append the resulting thin solid as a new body. Onshape-parity
Tier-2 item; the kernel had Shell (hollow a whole solid) but no way to turn
a single face into a plate.
Kernel: CadFeatureType::Thicken, add_thicken()/apply_thicken() as a
body-level op next to Transform/Mirror. The picked face is wrapped in a
TopoDS_Shell and offset via BRepOffsetAPI_MakeThickSolid::MakeThickSolidBySimple;
the result is orientation-normalised to positive volume (same convention as
apply_mirror). Serialization stays append-only — thicken_face,
thicken_thickness, thicken_flip appended to save/load, recipe version
unchanged at 2.
MCP: `thicken` method (body/face/thickness/flip) plus the missing
feature_type_name() case.
Tests: 6 new [CadDocument] cases (plate volume within 1%, flip direction,
bad face id, zero thickness, fuse-with-source, round-trip). Golden fixture
regenerated with a GoldenThicken feature and exact field-value assertions.
Suite 57 -> 63 cases, 1054 -> 1119 assertions.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Until now move and rotate lived only in the GUI as m_body_xform, a display
transform. That made them a correctness hole, not a missing tool: a moved body
recomputed and booleaned at its ORIGINAL position, and the move was not in the
recipe at all, so it vanished on save/reload. Only export_step consulted the
transform, which is why the discrepancy stayed hidden.
CadFeatureType::Transform makes it a real feature: rotate angle_deg about
xf_axis through xf_pivot, then translate by xf_translate, applied to the target
body with BRepBuilderAPI_Transform. xf_copy=true keeps the source and appends
the transformed body instead of mutating in place, which covers Onshape's
Transform/copy in the same feature.
Rotation is composed before translation (trsf = tr * rot) so the pivot means
what a user expects — the point the body turns about, not a point that then
drifts with the translation. A rotation with a degenerate axis is refused
rather than silently skipped; a zero angle skips the rotation entirely so a
pure move needs no axis at all.
The decisive test is not the bbox arithmetic but "moved body participates in a
later boolean at its new position": two coincident boxes, one moved to partial
overlap, fused. The fused volume must be strictly greater than one box (the
move took effect in the kernel) and strictly less than both (they still
intersect). With a display-only transform the first assertion fails.
Serialization stays append-only; recipe version unchanged at 2. Golden fixture
regenerated with a GoldenTransform feature carrying distinctive literals so a
field reorder shows up as obviously wrong values. Also fills in the Helix arm
of feature_type_name(), missing since the helix commit.
Kernel suite 51 -> 57 cases, 985 -> 1054 assertions, green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Adds CadFeatureType::Helix — the missing input for Sweep. Sweep already
existed but could only follow a sketch, so springs, coils, augers and
non-standard-pitch threads were unreachable. Helix + the existing Sweep now
gives all of them with no further work.
Built the OCCT way: a 2D line on a Geom_CylindricalSurface (Geom_ConicalSurface
when helix_taper_deg != 0) turned into an edge and lifted to 3D with
BRepLib::BuildCurves3d — a true analytic helix, not a sampled polyline, so a
swept spring is smooth rather than faceted. The axis is the plane normal
through the plane origin, matching how Revolve and Plane already work.
Sweep's path resolution is widened to accept either a Sketch (unchanged
behaviour) or a Helix, and rejects anything else with a clear error. Helix
itself is skipped in route_feature and recompute — like the datum features, it
produces no body and exists to be consumed.
Invalid input is refused rather than approximated: non-positive radius or
pitch, negative height, a turn count above 10000 (which would hang OCCT), and
a taper that would drive the radius negative before reaching the top all fail
with a specific error.
Serialization: helix_radius/pitch/height/left_handed/taper_deg appended at the
very end of both save and load, identical order, after the coordsys block.
SNAPORCA_CAD_RECIPE_VERSION stays 2; Helix is appended to the end of
CadFeatureType. Golden fixture regenerated with distinctive literals and
field-value assertions; all pre-existing assertions pass unchanged.
Tests assert analytic values. The one that actually proves it is a helix and
not a circle or a spiral: arc length of r=5 pitch=2 height=10 measured with
BRepGProp::LinearProperties against 5*sqrt((2*pi*5)^2 + 2^2), WithinRel 1e-3.
Plus bounding box (2r in X and Y, height in Z), the conical top radius, the
left-handed winding compared at equal parameter, and the integration test:
a circle r=1.5 swept along a 5-turn helix gives one valid solid of ~1115 mm^3
(WithinRel 0.1 — pipe sweeping is not exact).
MCP: `helix` method registered in describe_tools().
Ported from snaporca 6cdc6b5459. Two fork-specific adjustments: the two new
error-message assertions use Catch2 v3's ContainsSubstring (v2's Contains does
not exist here), and the golden fixture is copied rather than regenerated
because this fork cannot be compiled locally — make_golden_doc_v1() is
byte-identical across both forks, so the blob is provably the same.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Adds CadFeatureType::Axis and ::CoordSys — reference geometry that produces
no solid, modelled on the existing Plane datum feature.
Axis construction methods (AxisType): TwoPoints, FaceNormal,
CylinderCenterline, PlaneIntersection, AlongEdge. The centreline case is the
useful one: it gives a real axis through an existing hole or boss.
Coordinate systems (CoordSysType): PointWorld and FaceAndDirection. The
latter Gram-Schmidts the picked references, so the stored frame is
orthonormal even when the user's X hint is not perpendicular to the face
normal; the third axis is derived by cross product rather than stored, so it
cannot drift out of sync.
Revolve and pattern are deliberately NOT rewired to consume these — this
commit adds the reference geometry only and changes no existing behaviour.
Serialization: all axis_*/coordsys_* fields appended at the very end of both
CadFeature::save and load, identical order, after mirror_keep_original.
SNAPORCA_CAD_RECIPE_VERSION stays 2; Axis and CoordSys are appended to the
end of CadFeatureType so existing type ordinals are unchanged. Golden fixture
regenerated with distinctive non-default literals and field-value assertions
for every new field; all pre-existing assertions pass unchanged.
Tests assert analytic values: two-point axis direction exactly +Z with unit
length, cylinder centreline collinear with Z and on the true axis, parallel
planes fail cleanly, and the Gram-Schmidt frame is orthonormal to 1e-9 with
X x Y == Z. Degenerate input (identical points) fails with a non-empty error
rather than producing NaNs.
MCP: `axis` and `coordsys` methods registered in describe_tools().
Ported from snaporca 242d4efecb. The golden fixture is copied rather than
regenerated because this fork cannot be compiled locally (Eigen 5.0.1 vs the
build image's 3.3); make_golden_doc_v1() is byte-identical across both forks,
so the two fixtures are provably the same blob.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Adds CadFeatureType::Mirror: reflect a target body about a plane using
gp_Trsf::SetMirror + BRepBuilderAPI_Transform. BooleanMode::New keeps the
mirrored copy as its own body (mirror_keep_original decides whether the
source survives); BooleanMode::Add fuses it back into the source, so an
overlapping mirror does not double-count volume.
Serialization: mirror_keep_original is appended at the very end of both
CadFeature::save and load (append-only contract). The mirror plane reuses
the existing `plane` member and the body selector reuses `target_body`,
as Cut already does. Golden fixture regenerated at the current
SNAPORCA_CAD_RECIPE_VERSION = 2; the existing field-value assertions all
still pass unchanged, and the reorder tripwire was re-verified after
regeneration (swapping draft_face/draft_angle in `load` alone still
fails the golden test).
Tests assert analytic values: mirrored volumes equal (8000 each) with the
reflected centroid, Add on a non-overlapping asymmetric body gives exactly
2x volume, Add across an intersecting plane gives strictly less than 2x,
and an invalid body index fails cleanly with a non-empty error.
MCP: `mirror` method registered in describe_tools().
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
# Description
Adding optional flag for enabling console logging introduced in #14439.
Console logging not working with LLDB-DAP on VSCode as per #14897
Code changes won't fix this because it is a LLDB-DAP issue documented in
#14909
Use flag `-DUSE_SLIC3R_CONSOLE_LOG=ON` or `-DUSE_SLIC3R_CONSOLE_LOG=OFF`
to enable/disable it.
Alternatively in you VSCode's settings.json,
```
"cmake.configureSettings": {
"USE_SLIC3R_CONSOLE_LOG": "OFF"
}
```
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Port of snaporca c2821af783. New GeometryEngine::mass_properties over BRepGProp
(separate VolumeProperties/SurfaceProperties), bounds-checked
CadDocument::body_mass_properties, and a mass_properties MCP method. Query-only:
no CadFeature, no serialization, no version change. Analytic tests
(WithinRel/WithinAbs): cube 8000/2400/COM(0,0,10)/inertia 533333, cylinder
500pi/300pi, hollow = solid-500pi, invalid index -> valid=false.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Port of snaporca 04c3d579a7. Bump SNAPORCA_CAD_RECIPE_VERSION 1 -> 2;
deserialize_recipe sets a user-facing error distinguishing too-new / too-old
/ corrupt instead of a silent bare false. No per-version migration by design.
Golden fixture regenerated at v2 (v1 retired), field-value reorder tripwire
unchanged. Fork adjustment: Catch2 v3 string matcher ContainsSubstring
(not v2's Contains) in the two new version-mismatch tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Remove DEPENDS/empty-COMMAND args that are invalid in the
add_custom_command(TARGET) form (CMP0175), fix the FindDraco.cmake case
mismatch, and opt Boost lookup into upstream BoostConfig via CMP0167 for
the OpenVDB module and the CGAL find.
## Problem
On H2C (carousel) printers, the wipe tower purge volume calculation in
`_make_wipe_tower()` tracks filament state **per-extruder** (2 slots).
Since H2C has up to 7 carousel nozzle slots on a single extruder, all
filaments sharing that extruder are collapsed into one tracking slot.
This causes:
Test:
[5cubes.3mf.zip](https://github.com/user-attachments/files/30092551/5cubes.3mf.zip)
- **Massive redundant AMS flushing** every filament change on the
carousel triggers a full purge against the "previous" filament, even
when the target nozzle slot already has the correct filament loaded
- **60.9g total weight** instead of ~17g (**3.5× material waste**)
- **3h09m print time** instead of ~1h57m (**60% longer**)
## Root Cause
The code uses `nozzle_cur_filament_ids[extruder_id]` (a 2-element array)
to track which filament was last used for each extruder. BambuStudio
uses `NozzleStatusRecorder`, which tracks per `group_id` (physical
carousel slot 0..6).
## Changes
| File | Change |
|---|---|
| `Print.cpp` | Replace `nozzle_cur_filament_ids` with
`NozzleStatusRecorder`. Use `get_nozzle_for_filament()` to resolve the
physical carousel slot per layer. Select `filament_prime_volume_nc` for
nozzle changes, `filament_prime_volume` for filament changes. |
| `PrintConfig.hpp` | Add `ConfigOptionFloats filament_prime_volume`
(per-filament EC prime volume, missing from upstream but present in BBS
and H2C profiles) |
| `PrintConfig.cpp` | Register `filament_prime_volume` with default
45mm³ (matching BBS) |
| `Preset.cpp` | Add `filament_prime_volume` to preset keys |
Also includes `tests/compare_analyzer/` - two standalone Python tools
for G-code slice comparison and temperature timeline analysis (stdlib
only, no dependencies).
## Test Results (5-color H2C Hybrid print, same 3mf project)
| Metric | Upstream (broken) | **Fixed** | BBS (reference) |
|---|---|---|---|
| **Total weight** | 60.90g | **16.20g** ✅ | 17.47g |
| **Print time** | 3h09m | **1h57m** ✅ | 1h51m |
| **Filament changes** | 105 | 105 | 140 |
| **Tool changes** | 35 | 35 | 35 |
| **Critical discrepancies vs BBS** | ⚠️ YES | ✅ None | — |
## Analysis Tools (`tests/compare_analyzer/`)
Two standalone Python tools (stdlib only, no dependencies) for deep
G-code comparison:
- **`compare_slices.py`** - comprehensive .3mf slice comparison:
filament usage, nozzle mapping, tool change sequences, prime tower
analysis, temperature timeline, retract parameters, and automatic
critical discrepancy detection (weight/time anomalies)
- **`show_temp_plot.py`** - interactive HTML temperature timeline
plotter for visualising heater profiles during multi-nozzle prints
(supports single-file and side-by-side comparison)
Usage:
```bash
python3 tests/compare_analyzer/compare_slices.py file1.3mf file2.3mf --labels "Upstream" "Fixed"
python3 tests/compare_analyzer/show_temp_plot.py file1.3mf file2.3mf
```
## Screenshots
### OrcaSlicer Upstream (unfixed) - 60.90g, 3h09m
<img width="1512" height="982" alt="Screenshot 2026-07-16 at 15 22 58"
src="https://github.com/user-attachments/assets/3efb2bff-ff1e-43db-9669-feafa5921b51"
/>
### OrcaSlicer Fixed - 16.20g, 1h57m
<img width="1512" height="982" alt="Screenshot 2026-07-16 at 15 23 08"
src="https://github.com/user-attachments/assets/c1d36dc5-9b01-4691-80ef-7364540e1f4e"
/>
### BambuStudio Reference - 17.47g, 1h51m
<img width="1512" height="982" alt="Screenshot 2026-07-16 at 15 24 52"
src="https://github.com/user-attachments/assets/5c0b11e2-64f4-40e9-8c7c-3f42519786c3"
/>
### Temperature Timeline: Upstream vs Fixed
<img width="1511" height="829" alt="Screenshot 2026-07-16 at 15 23 35"
src="https://github.com/user-attachments/assets/926c2cb5-dfd4-4ce0-bb40-82e6165eb134"
/>
### Temperature Timeline: Fixed vs BBS
<img width="1512" height="825" alt="Screenshot 2026-07-16 at 15 23 51"
src="https://github.com/user-attachments/assets/85c72dda-e779-4aa6-8118-fb17e5f8482d"
/>
## Compatibility
Safe for non-carousel printers: when each extruder has a single nozzle,
`group_id == extruder_id`, so `NozzleStatusRecorder` behaves identically
to the original per-extruder tracking. The `filament_prime_volume`
default (45mm³) matches the existing global `prime_volume` default.
## Reference
BambuStudio `Print.cpp` `_make_wipe_tower()` L3341-3392 -
`NozzleStatusRecorder` pattern.
* Ensure spiral lift positive quadrant
* check for printable area
* clamp area
* simpler version
* Adjust printable area bounds with safety safety margin
Added safety margin to printable area bounds calculations.
* increase safety margin
* Refactor safety margin calculations in GCodeWriter
* New Logic
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
---------
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* fix: constrain PA_Line calibration bounding box to model geometry
- PA_Line bounding box now uses actual model convex hull for X constraint instead of full printable area
- Skip EXCLUDE_OBJECT_DEFINE for PA_Line mode (single object, no exclusion needed)
- Add tool config files to .gitignore
* modified: .gitignore
* fix: add gcode type annotations and fix box height in PA line calibration
- Label calibration segments with appropriate TYPE comments (Outer wall, Bottom surface, Top surface, Custom) for proper gcode processing
- Fix bounding box height calculation to account for z_offset
- Add LAYER_CHANGE and HEIGHT comments for multi-layer numbering display
* fix: lock PA_Line bounding box X to bed centre instead of model hull
* Added extra TYPE to ensure text/numbers/glyphs are labelled correctly
` gcode << ";TYPE:Outer wall\n"; `
* Remove hardcoded Perl path in OpenSSL.cmake
Remove hardcoded Perl path for Windows configuration.
* Add cross compilation support for Windows in OpenSSL.cmake
* Remove unnecessary blank line in OpenSSL.cmake
* Set perl config command back to variable
Accidentally uploaded version with hardcoded path for my local environment
* whitespace adjustment in previous
* removed personal .gitignore config
Remove specific files and directories from .gitignore.
* Fix box height parameter in DrawBoxOptArgs
Update DrawBoxOptArgs to use `m_height_layer` instead of `m_height_layer*2+z_offset`. This isn't a Z coordinate, it's a layer height
* Replace hardcoded extrusion type with call to `GCodeProcessor::reserved_tag` Etags
* Get pa_line bounding box from actual calibration variables
Updated calibration line bounding box calculation to use actual geometry for X bounds, using a fake call to generate the calibration pattern.
This will accurately get the size of the calibration pattern, massively reducing wasted time from bed mesh probing.
* Implement print_extents method in CalibPressureAdvanceLine
Add print_extents method to calculate bounding box extents based on bed dimensions.
* Declare print_extents method in CalibPressureAdvanceLine
Added print_extents method to return X-bounds of the pattern.
* Fixed whitespace issues
* Adjust print_extents to account for delta printers
Check if the printer is delta layout and adjust bed dimensions if so.
Used code from `CalibPressureAdvanceLine::generate_test`
* Added semicolons to reserved tags
Didn't realise etags wouldn't add semicolon - added these
* only include number list in bounding box if number list is used
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* avoid bounding box overflowing bed
* Tabs to spaces
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
- WipeTower: use filament_ramming_volumetric_speed(_nc) for ramming, falling back to
max_vol_speed only when nil; gate precool temps on enable_pre_heating
- ToolOrderUtils: disable the inter-layer forecast in the per-nozzle base reorder so
H2D/H2C ordering is unchanged
- PrintConfig: stop stripping filament_prime_volume in handle_legacy; document that
prime_volume drives the Type2 wipe tower and filament_prime_volume the Type1 one
- GCodeProcessor: exclude post-print end-gcode M400 dwells from the M73 estimate and
drop the dead air-filtration state
- Trim verbose BambuStudio source-location comments across the port
The preset option was plugin_preference_overrides while the GUI field type
that renders it was GUIType::plugin_config, for one and the same thing.
Settle on "config": the store, the dialog and the Python hooks all say config
already, so renaming that way touches 4 files instead of the whole plugin
subsystem and the public plugin API.
Keep the _overrides suffix — the option is the preset's override layer over
the base PluginConfig store, a distinction EffectiveCapabilityConfig tracks.
Also wrap the printer tab's group heading in L(); it was the only one of the
three missing it, and was therefore untranslatable.
Enable use_forcast in reorder_filaments_for_minimum_flush_volume_base
to match the multi-extruder path behavior (line 1227).
The forecast solver (solve_extruder_order_with_forcast) considers the
next layer's filament set when choosing ordering for the current layer,
minimizing inter-layer transition flush cost.
Previously disabled (hardcoded false) in the single-nozzle/base path,
causing suboptimal inter-layer transitions. The multi-extruder path
already had this enabled.
Measured on 5cubes (5 filaments, 35 layers, H2C):
- Print time: -12 min (-10%)
- Waste filament: -5g (-28%)
- WT extrusion: -44%
Limited to ≤5 filaments per nozzle per layer (O(N!×M!) complexity).
Clamp ramming speed during extruder changes so the departing nozzle
has enough time to reach precool_target_temp before carousel rotation.
Only applies to extruder changes (not carousel nozzle changes).
Reference to BBS: BambuStudio/src/libslic3r/GCode/WipeTower.cpp
ramming() L3449-3462
End gcode contains firmware-conditional M400 waits for air purification,
timelapse capture, and sound notification that are post-print operations.
These were incorrectly included in M73 total time, inflating the estimate.
The fix detects MACHINE_END_GCODE_START tag during the streaming parse
(process_tags) and sets m_skip_end_gcode_delays=true. process_M400 then
skips timed delays (S/P params) in the end gcode scope.
BBS achieves the same effect by dropping leftover in calculate_time
(is_final=true). We skip at the source instead, which is more surgical
and leaves calculate_time behavior unchanged for all printers.
Affects all BBL printers with MACHINE_END_GCODE_START tag.
Non-BBL printers are unaffected (no tag = no skip).
The upstream _make_wipe_tower() tracked purge volumes per-extruder (2 slots),
which collapsed all H2C carousel filaments into one slot and caused massive
redundant AMS flushing (~40g instead of ~0.4g).
Changes:
- Print.cpp: Replace per-extruder nozzle_cur_filament_ids with BBS
NozzleStatusRecorder that tracks per group_id (carousel slot 0..6).
Use get_nozzle_for_filament() to resolve physical slot per layer.
Select filament_prime_volume_nc for nozzle changes, filament_prime_volume
for filament changes (BBS pattern).
- PrintConfig.hpp/cpp: Register filament_prime_volume (per-filament EC prime
volume, default 45mm³) matching BBS PrintConfig.
- Preset.cpp: Add filament_prime_volume to preset keys list.
Safe for non-carousel printers: group_id == extruder_id when each extruder
has one nozzle, so NozzleStatusRecorder behaves identically to the original
per-extruder tracking.
Reference to BBS: BambuStudio/src/libslic3r/Print.cpp _make_wipe_tower() L3341-3392
