Introduces a plugin capability that runs Python at the seams of Print::process(),
letting a plugin read and rewrite slicing state as it is computed.
- New slicing_pipeline_plugin config option; selected plugin refs are serialized
into the print manifest.
- Print gains an injectable hook fired at each pipeline step (posSlice,
posPerimeters, posInfill, ...). It is a no-op when unset, fires only on genuine
(re)computation, and never on the use-cache path.
- orca.slicing submodule: SlicingPipelineCapabilityBase plus a trampoline and a
Step enum. Capabilities read the live graph through zero-copy int64 numpy views
(contour/holes geometry with unscaled coordinates, flattened toolpath data) and
edit it through 2D-geometry mutators with cache-invariant refresh.
- GUI dispatcher runs capabilities during slicing under the GIL, turns plugin
errors into slicing errors, honors cancellation, and adds the plugin picker.
- Ships the InsetEverySlice sample plugin and binding/hook tests.
Refactor skirt and brim ownership and emission flow
Refactor skirt and brim generation around a common object/group
ownership model.
Skirts and brims are now emitted as a coordinated preamble
(skirt -> brim -> object) instead of being generated and emitted
through multiple independent code paths.
Changes:
- Fix repeated skirt emission caused by the previous skirt state
tracking logic.
- Restore local skirt/brim ordering for per-object skirts in
By Layer mode.
- Emit brims together with their owning object or object group.
- Handle combined brims independently from skirt grouping.
- Handle draft shields through the same ownership model as skirts.
- Fix draft shield generation when skirt height is zero.
- Generate draft shields after brim geometry is known, preventing
draft shields from overlapping brims.
- Reject unsafe grouped per-object skirt configurations in
By Object mode.
- Remove legacy skirt emission paths and state-management
workarounds.
Support brim generation remains unchanged.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Make filament compatibility temperature-aware
Extend filament compatibility checks to consider actual nozzle temperatures and temperature ranges.
Print::check_multi_filaments_compatibility now accepts nozzle temperatures and range lows/highs; it resolves missing ranges from material defaults, computes per-filament effective temperatures, and checks pairwise compatibility (including high/low/mid mixed cases).
Updated callers in Print::check_multi_filament_valid and CalibrationWizardPresetPage to pass nozzle settings, consolidated user-facing warning strings, and fixed extruder index handling and minor logic/path improvements.
Clarify incompatible nozzle temperature warnings
* Update Print.cpp
* Remove json usage
* Reduce messages
Previously, wipe tower behavior was determined by checking if the printer
was a QIDI vendor. This introduces a configurable enum (Type 1 / Type 2)
so any printer can select its wipe tower implementation. BBL printers
remain hardcoded to Type 1. Qidi profiles default to Type 1.
The WipeTower2 code path never called construct_mesh(), leaving
wipe_tower_mesh_data as std::nullopt. GCode export then dereferenced
it unconditionally, triggering an assertion failure / crash.
Port Z Anti-Aliasing from BambuStudio-ZAA (https://github.com/adob/BambuStudio-ZAA)
to OrcaSlicer. ZAA eliminates stair-stepping on curved and sloped top surfaces
by raycasting each extrusion point against the original 3D mesh and micro-adjusting
Z height to follow the actual surface geometry.
Key changes:
- Add ContourZ.cpp raycasting algorithm (~330 lines)
- Extend geometry with 3D support (Point3, Line3, Polyline3, MultiPoint3)
- Template arc fitting for 2D/3D compatibility
- Change ExtrusionPath::polyline from Polyline to Polyline3
- Add 5 ZAA config options (zaa_enabled, zaa_min_z, etc.)
- Add posContouring pipeline step in PrintObject
- Update GCode writer for 3D coordinate output
- Add ZAA settings UI in Print Settings > Quality
- Add docs/ZAA.md with usage and implementation details
ZAA is opt-in and disabled by default. When disabled, the slicing pipeline
is unchanged.
* The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed
* Merge branch 'main' into main
* Merge branch 'SoftFever:main' into main
* Revert "The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed"
This reverts commit 8d296720b8.
* Update Qidi Q2 0.4 nozzle.json
修改Q2打印高度
* Merge branch 'SoftFever:main' into main
* Merge branch 'SoftFever:main' into main
* change machine_gcode
* Merge branch 'main' of https://github.com/HYzd766/OrcaSlicer
* Merge branch 'SoftFever:main' into main
* Multi-color code compatible with QIDI models
* Merge branch 'main' into main
* toggle axis visibility on canvas (#9666)
* toggle axis visibility on canvas
* set show_axes config on toggle
* fix: Add pause and filament change to machine gcodes for Sovol SV08 MAX (#11214)
* Add fixed Ironing Angle setting for uniform surface finish (#11195)
* Initial working fixed ironing angle implemented with new Fixed ironing angle setting
* update documentation
* Combine Fill.is_using_template_angle and Fill.alternate_fill_direction into Fill.fixed_angle
* Rename SurfaceFillParams.is_using_template_angle to SurfaceFillParam.fixed_angle.
1. set wipe tower real height
2. fix wipe tower small arc error
3. add rib_width constraint to ensure that the rib wall of the wipetower are attached to the infill.
jira: STUDIO-10540
Change-Id: Idfdc809f0236121d98587ac2a09a2ebbf5caf945
(cherry picked from commit 3a7dcfd23249571224a4d538c55907a0a5c6154d)
and fix conflict checking when the wipe tower's brim fully encloses the model
jira: STUDIO-10237, STUDIO-10296
Change-Id: I6e2a6640c06ddb6b3af700c9048fa26434411631
(cherry picked from commit b36c41e5146168325d8b7ec966eb97f1062442a7)
of the wipe tower's outer wall to use the actual outer wall path.
jira: none
Change-Id: Ib45ecbc328c88c1abe6d9e8567f715331a3ddd37
(cherry picked from commit 0a20f1fe6d6d63cdcb13bc19fd9ae553f45b6f59)
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
(cherry picked from commit 17771d0fbf753dd22411ce490586958bd643264e)
1. Detect unprintable area for extruder when slicing
2. Always do filament map again if object pos changed
jira:STUDIO-9473
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic01b8be8e3b08ba6b34efb2d3c451c9e985a03e8
(cherry picked from commit f1445ff0477795e9baf3792348ff27d79ee2308c)
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
(cherry picked from commit 95e49986f32070756182a31843f4f37f863f07ac)
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
to support different printable height of multi_extruder
jira:none
Change-Id: I265c65e15fc8f598c3456556557bb6977b5de820
(cherry picked from commit 933adbaaf0eaf361e39f131dd5536dca91214d43)
1. auto mode dragdrop is not allowed
2. not display filament_map when there is no result in auto mode
jira:none
Change-Id: I0800e0d832e27fe459a17bb1aa829b5e72d0ee8f
(cherry picked from commit 9ee85bef34aaabe7a4cef251f07e77f9af693a2f)
1.In auto mode,display the statistics of auto mode and single
extruder
2.In manual mode,display the statistics of manual mode and auto mode
3.Support by object mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If54c4db79f33d5278c0f18d01ab0518e8660f9c7
(cherry picked from commit 2dbc5c939666e294c805ee4bf33ec09976688be3)
1.Add filament flush,filament change count reduced by multi
extruder
NTOE: cases when printing by object haven't been handled
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iaaea5f8ffae2345df5a6f1dc605342d835974d48
(cherry picked from commit ad65cdb909b29210117f690a119ef76b70373da4)
support drag drop to modify the filament map
jira: none
Change-Id: I0ed3180a0fa8e95e7c871bb039eb844faccd1344
(cherry picked from commit 67f67d76889668fdd80ae5e496b6cbca5f771a43)
* SPE-2486: Refactor function apply_mm_segmentation() to prepare support for fuzzy skin painting.
(cherry picked from commit 2c06c81159f7aadd6ac20c7a7583c8f4959a5601)
* SPE-2585: Fix empty layers when multi-material painting and modifiers are used.
(cherry picked from commit 4b3da02ec26d43bfad91897cb34779fb21419e3e)
* Update project structure to match Prusa
* SPE-2486: Add a new gizmo for fuzzy skin painting.
(cherry picked from commit 886faac74ebe6978b828f51be62d26176e2900e5)
* Fix render
* Remove duplicated painting gizmo `render_triangles` code
* SPE-2486: Extend multi-material segmentation to allow segmentation of any painted faces.
(cherry picked from commit 519f5eea8e3be0d7c2cd5d030323ff264727e3d0)
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* SPE-2486: Implement segmentation of layers based on fuzzy skin painting.
(cherry picked from commit 800b742b950438c5ed8323693074b6171300131c)
* SPE-2486: Separate fuzzy skin implementation into the separate file.
(cherry picked from commit efd95c1c66dc09fca7695fb82405056c687c2291)
* Move more fuzzy code to separate file
* Don't hide fuzzy skin option, so it can be applied to paint on fuzzy
* Fix build
* Add option group for fuzzy skin
* Update icon color
* Fix reset painting
* Update UI style
* Store fuzzy painting in bbs_3mf
* Add missing fuzzy paint code
* SPE-2486: Limit the depth of the painted fuzzy skin regions to make regions cover just external perimeters.
This reduces the possibility of artifacts that could happen during regions merging.
(cherry picked from commit fa2663f02647f80b239da4f45d92ef66f5ce048a)
* Update icons
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Make the region compatible check a separate function
* Only warn about multi-material if it's truly multi-perimeters
* Improve gizmo UI & tooltips
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Clipper: Verify range of int32 coordinates on input.
Cherry-picked from prusa3d/PrusaSlicer@fa7debf49d
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: Optimized PointInPolygon() to calculate cross products
with int64s instead of doubles.
Cherry-picked from prusa3d/PrusaSlicer@9dca8403fe
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Reworked the ClipperLib / Polygon types to use
the tbb::scallable_allocator to better scale on multiple threads.
Cherry-picked from prusa3d/PrusaSlicer@9cde96993e
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* use tbb::scallable_allocator for Polygons and ExPolygon::holes
to better scale on multiple threads
Cherry-picked from prusa3d/PrusaSlicer@b67ad6434d
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed compilation on GCC and CLang
Cherry-picked from prusa3d/PrusaSlicer@b3b44681a9
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Remove clipper2 which is not used
* Removed shiny profiler from clipperlib
Cherry-picked from prusa3d/PrusaSlicer@7e77048593
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: Further optimization of memory allocation using scalable_allocator.
ClipperLib: SimplifyPolygon() - changed default winding number to positive,
added strictly_simple parameter.
ClipperUtlis simplify_polygons() - removed "remove_collinear" parameter
Cherry-picked from prusa3d/PrusaSlicer@a7e17df25f
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: emplace_back() instead of push_back().
Cherry-picked from prusa3d/PrusaSlicer@2e150795b1
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed issue in a 32bit clipper, where IntersectPoint() checked for
the Y coordinate of the calculated intersection point for validity,
but the Y coordinate was already rounded to 32bits, thus an overflow
may have in rare cases masked invalidity of the result.
Cherry-picked from prusa3d/PrusaSlicer@b39c33414f
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed Vojtech's out of boundary assert in Clipper library.
Cherry-picked from prusa3d/PrusaSlicer@0a202dcff3
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Update clipper to 6.4.2.
Cherry-picked from prusa3d/PrusaSlicer@b8b3cccb40
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Try fix cmake opencv
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
