A plain CLI slice ran none of the placement sites, so a stored or
default tower position that no longer fits the tower the plate needs
went straight to the generation-time error. The slice loop now applies
the same clamp the GUI applies on reload to every plate it is about to
slice, skipping only plates that print no tower: by-object plates with
more than one instance, and plates whose footprint estimate is empty
(which covers single-filament plates without smooth timelapse, wrapping
detection or a raft). The plate's filaments come from the same
config-driven derivation the estimate uses everywhere else.
The two arrange sites read the brim width from the right option when
padding the default position; an auto brim uses its 8 mm cap there,
since the object heights are unknown before the estimate runs.
Orca content-addresses every system filament, Bambu's included, but a printer,
its AMS and its vendor's cloud know only that vendor's own catalog ids. The
printer agent now translates between the two: outbound MQTT and FTP traffic, the
AMS mapping sent with a print job, and the ids written into a 3mf bound for the
printer all leave in the printer's own ids, while status messages, loaded
projects and SD-card prints arrive in Orca's. An id with no mapping passes
through unchanged, and an agent whose printers already speak Orca's ids
translates nothing at all.
Bambu's map is generated from BambuStudio's own shipped bundle; a missing or
unreadable file leaves every lookup an identity rather than taking the app down.
The profile check validates the map's shape, and profile CI now runs on the paths
that can change it. docs/HLSD/filament_id.md records the places the map
deliberately does not reach.
* Fix incorrect early exit for CLI mode no-support preventing parameters from being read
* Use PartPlate's m_height to allow CLI to perform proper BuildVolume check
* Add safeguard against extruder_pintable_heights and extruder_areas vector size mismatch
* Preserve printable_height precision in PartPlate/PartPlateList
* Fixed multiple BuildVolume warning issue, and keep check_outside diff minimal
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
Part 1 of 3 of the CLI-mode bug sweep, split out of #15452 per review
feedback there. This PR contains the crash fixes.
## Fixes
- **`--outputdir`/`--datadir` with a missing parent directory aborted**
via unguarded `create_directory`. Directories are now created
recursively, with a graceful early exit and a specific error message if
creation fails.
- **`--slice` + `--export-3mf` segfaulted on a from-scratch slice**:
`ConfigOptionVector::get_at()` on an empty vector is `.front()` of an
empty vector (UB). Guards added for `filament_color`/`filament_id` at
the CLI call site, and inside `DynamicPrintConfig::get_filament_type`
for `filament_type`/`filament_is_support`/`filament_id`. Only *empty*
vectors are treated as missing — the existing clamp-to-front behavior
for merely out-of-range indices is preserved, so GUI callers are
unaffected.
- **OOB heap write from stale `filament_self_index` on
`--load-filaments`** (fixes#14181): a 3MF carrying more
`filament_self_index` entries than loaded filaments wrote past the end
of `old_variant_counts`. The guard validates both bounds — entries `>
filament_count` *and* non-positive entries (`< 1`), since a single `0`
in an otherwise-valid array indexes `old_variant_counts[-1]`.
- **Wrong printable-area check** for non-rectangular beds: use the
printable area's bounding box instead of a naive vertex calculation
(fixes#15363).
- **`nozzle_height` and `align_center` were not read into the arrange
config** in CLI mode.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
- Repro'd each crash on CLI before the fix; all resolved after.
- `tests/libslic3r` suite passes; full binary builds clean on Linux.
- Added `get_filament_type` unit tests
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* Reject invalid CLI argument values instead of silently accepting them
* Add read_cli accept/reject tests
* Update Option Type for LogFile argument
* Add read_cli vector option tests
* Accept common bool spellings on the CLI, cover --logfile in tests
* Add unit tests for truthy bool parsing
* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* fixes: %g directive writing between 1 and 13 bytes into a region of size between 6 and 18 [-Wformat-overflow=]
* fixes: %5s directive writing between 5 and 63 bytes into a region of size 58 [-Wformat-overflow=]
* fixes: catching polymorphic type by value [-Wcatch-value=]
* fixes: [-Wcomment]; removes whitespaces
* increases buffer size from 71B to 90B to avoid potential ovfl.
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
CLI: guard 4 null derefs when loading a 3mf with no preset ids
At OrcaSlicer.cpp:1700-1704 the post-load block reads printer_settings_id,
print_settings_id, filament_settings_id, and nozzle_diameter from the
config that the 3mf carries. If the 3mf is a BBL/BBS-flavored 3mf but
was produced by a non-GUI writer (e.g. CLI --export-3mf without a
loaded preset) any of those keys can be absent, and config.option<T>(...)
returns nullptr — the ->value / ->values deref then SIGSEGVs.
Wrap each optional lookup in an if-let. printer_model, printer_extruder_variant,
and print_extruder_variant already pass create_if_missing=true and are safe.
Repro (BEFORE this patch):
orca-slicer --export-3mf out.3mf in.stl # produces preset-less 3mf
orca-slicer --info out.3mf # SIGSEGV at :1700
bt: __cxx11::basic_string::_M_assign
-> Slic3r::CLI::run @ OrcaSlicer.cpp:1700
AFTER: --info out.3mf returns exit 0 with the mesh summary.
The same failure mode affected --inspect-mesh, --inspect-paint, and
every other action that has to walk the loaded model's config; --slice
would only survive because it always injects a printer via
--load-settings.
- FilamentMapDialog's manual page understands volume types: a mixed
(Hybrid) extruder shows separate Standard / High Flow drop zones
with live sub-nozzle counts, a validation timer with an inline
error + "set nozzle count" suggestion, and composes a per-filament
volume map on OK (persisted to the plate or globally)
- switching an extruder's Flow type rewrites the affected plate map
entries; plate maps stay sized across filament add/delete/count
changes (values keep their filament, no index shift)
- CLI: manual mapping on multi-nozzle printers synthesizes the volume
map from extruder flow types when absent; nozzle-manual mode
requires explicit maps; computed maps land on the plate so exported
projects carry filament_volume_maps
- filament_nozzle_map joins the project options (selection seeding +
filament-count resizing)
- pot entries for the new dialog strings
All 19 reference fixtures byte-identical; slicing an exported Hybrid
project reproduces its g-code byte-for-byte with the volume map
round-tripped through model_settings.config.
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
* fix: isolate calibration temp paths per user
The calibration temp files under <temp>/calib were file-scope statics
initialized before set_temporary_dir() runs at startup, so they kept
using the shared system temp root and missed the per-user isolation
added in #14607. On Linux every account shares /tmp, so the first user
to calibrate owns /tmp/calib and later users fail to write there, the
same cross-user collision #14607 fixed for model backups, STEP import,
and part skip.
Build the paths lazily from temporary_dir() instead, through a
calib_temp_dir() accessor and a calib_temp_file() join helper. The base
becomes <temp>/orcaslicer_<uid>/calib on Linux and is unchanged on
Windows, where the temp dir is already per user.
Also make StoreParams::path a std::string rather than a non-owning
const char*. The calibration code had to keep a std::string alive
solely to feed that pointer, and the field was uninitialized by
default; owning the string removes the lifetime hazard for all three
callers and makes the entry guard a reliable empty() check. Confined to
the 3mf project exporter (three callers, two internal reads); no
on-disk, format, or ABI impact.
Follows up on #14607 per @Noisyfox's review suggestion.
On Linux every account shares /tmp, but slicing builds temp paths there under
fixed, app-owned names via temporary_dir() (model backups, STEP import,
part-skip). The first user to slice creates and owns those dirs, so the next
user cannot write under them and slicing crashes with "No such file or
directory".
Tag the app temp root with the user id at startup (<temp>/orcaslicer_<uid>)
so every temporary_dir() consumer is isolated at once. The id stays at the
top level of the world-writable system temp so each user's dir is created
directly there; a shared parent dir would be owned by whichever user made it
first. The root is pre-created because STEP import writes into it directly.
Windows keeps the plain temp dir since it is already per-user.
Fixes#10108. Same root cause as #5969.
* Linux compositing - retain old code and make switchable via #if statement
* Make option settable via env variable/.desktop file
* undo accidental empty row delete
* Support 'Default' filament option (index 0)
Treat filament index 0 as the new "Default" (use active object/part filament) instead of using 1. Update config defaults and tooltips for wall/sparse/solid infill filament options (min/default -> 0, tooltip explains "Default"). Adjust normalization and propagation logic to respect explicit feature overrides and only apply base extruder when feature values are zero; only copy sparse->solid infill when sparse > 0. Introduce FeatureFilamentOverrideMask and clamp_feature_filament_to_valid to resolve and clamp feature filaments. Update UI lists and selection behavior to expose a "Default" entry and handle zero-based indices in PartPlate and Plater.
* enable_filament_for_features option
Co-Authored-By: LixNix <105106115+lixnix@users.noreply.github.com>
* \n
* Allow wipe_tower_filament to equal nozzle count
Relax the assertion in Print::extruders to permit wipe_tower_filament == config().nozzle_diameter.size(). The configuration value is 1-based and the code subtracts 1 when pushing the extruder index, so equality should be valid and selecting the last nozzle should not trigger an assertion.
* Revert "Allow wipe_tower_filament to equal nozzle count"
This reverts commit 2c976574327a8bcdc74a1b296bf1aaff7752a94e.
* Revert "enable_filament_for_features option"
This reverts commit 01c13baeddb8e26793f752deab788ee4d086975b.
* Migrate legacy feature filament defaults
Add migration logic to convert legacy feature filament selections from 1 to 0 for older 3mf files. Introduces a local migrate_legacy_feature_filament_defaults lambda in src/OrcaSlicer.cpp and src/slic3r/GUI/Plater.cpp that scans keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) on configs/objects/volumes, updates values, counts conversions and logs the result. Also adds a Semver check for "2.4.0-dev" in OrcaSlicer to trigger the migration for files older than that version. This preserves expected default filament selections when loading older project files.
* Update OrcaSlicer.cpp
* Extract migration helper to ConfigMigrations
Centralize legacy feature-filament default migration by moving the duplicated lambda into ConfigMigrations::migrate_legacy_feature_filament_defaults (src/libslic3r/Config.cpp) and declaring it in Config.hpp. Update OrcaSlicer.cpp and slic3r/GUI/Plater.cpp to call the new function instead of inline lambdas. The helper converts specific feature filament keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) from int 1 to 0 and returns the count of conversions to avoid duplicated migration logic.
* Remove DynamicFilamentList1Based and consolidate lists
Delete the specialized DynamicFilamentList1Based struct and its global instance. Update Choice registrations to use the single dynamic_filament_list for wall, sparse_infill and solid_infill filaments, and remove the extra update call for the removed instance. This consolidates filament choice handling and removes duplicated logic in Plater.cpp.
* move it
* fix objects
* Update Config.hpp
* Update profiles
Ignore SIGPIPE at startup to prevent crash on dropped printer connection
Writing to a closed printer network socket raised SIGPIPE, whose default
action terminated the whole process (exit 141, no crash report). Set
SIGPIPE to SIG_IGN once at main() entry (POSIX only) so such writes return
EPIPE to the existing networking error handling instead of killing the app.
Fixes#13787
## Summary
- skip CLI thumbnail generation when an OpenGL/GLFW context cannot be
created, allowing export workflows to continue in headless/automation
environments
- guard filament variant remapping against missing config options and
out-of-range variant indexes
- log warnings instead of dereferencing invalid config state during
CLI/profile-driven export
## Context
These guards came out of automating OrcaSlicer CLI exports for printer
workflows. In that flow, slicing/export can still be valid even when
thumbnail rendering is unavailable, but the current path can proceed
into OpenGL thumbnail setup after context creation fails. Separately,
malformed or mismatched filament/profile state can index past option
vectors during multi-filament value remapping.
## Test plan
- `git diff --check`
- `cmake --build build/arm64 --config RelWithDebInfo --target OrcaSlicer
-- -j4`
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
This can be enabled in Preference->Developer->Keep painted feature after
mesh change.
<img width="731" height="633" alt="init"
src="https://github.com/user-attachments/assets/8b195486-538e-4eda-9e77-bfdf1a794306"
/>
TODO:
- [ ] Bug fixes
- [ ] Make it faster
- Keep painting after other mesh operations such as reload from
disk/simplify/boolean operation etc:
- [x] Planar cut
- [x] Dovetail cut
- [x] Cut with part assigned to other side
- [x] Split to parts
- [x] Split to objects
- [x] Mesh boolean gizmo
- [x] Mesh boolean in right click
- [x] Reload from disk/replace stl (won't work well if mesh changed too
much)
- [x] Fix model
- [x] Simplify/smooth (this two won't work well due to too much mesh
changes)
- [x] Add options in settings since I think this will be experimental
for a long time until being tested by a lot of ppl
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
* Add runtime display backend detection for Wayland support
Add LinuxDisplayBackend utility to detect X11 vs Wayland at runtime
using GDK_IS_X11_DISPLAY / GDK_IS_WAYLAND_DISPLAY macros. This is
the foundation for removing the forced GDK_BACKEND=x11 and enabling
native Wayland support.
- New files: LinuxDisplayBackend.hpp/.cpp with get_linux_display_backend(),
is_running_on_wayland(), and is_running_on_x11()
- Propagate wxHAVE_GDK_X11 / wxHAVE_GDK_WAYLAND from FindGTK3.cmake
as compile definitions to libslic3r_gui
- No-op on non-Linux platforms (returns Unknown / false)
* Fix Phase 1 code quality: pragma once, source ordering, static cache
* Make X11 initialization conditional for Wayland support
Remove the unconditional GDK_BACKEND=x11 force that blocked native
Wayland. Replace with conditional logic:
- EGL safety fallback: re-force X11 only when wxUSE_GLCANVAS_EGL is
off and WAYLAND_DISPLAY is set, with a warning log
- XInitThreads() only called when DISPLAY is set (X11 in use)
- __GLX_VENDOR_LIBRARY_NAME only set when DISPLAY is present (GLX-specific)
- WEBKIT_DISABLE_COMPOSITING_MODE only set under XWayland (both
DISPLAY and WAYLAND_DISPLAY present)
- Guard X11/Xlib.h include with __has_include for robustness
- Restore display validation to accept either DISPLAY or WAYLAND_DISPLAY
This is Phase 2 of the Wayland support plan.
* Fix Phase 2: safer EGL macro check, add clarifying comments
* Add GLAD2 library and replace GLEW linkage in build system
Set up GLAD2 as a static library to replace GLEW for OpenGL loading.
GLAD2 supports both GLX and EGL, which is required for Wayland support.
- Create src/glad/ with pre-generated GLAD2 sources (GL 4.6 compat)
- Add src/glad/CMakeLists.txt building glad as a static library
- Wire glad into src/CMakeLists.txt before libvgcode
- Modify libvgcode to use shared glad for GL path (keeps local copy
only for GLES2/Emscripten) to avoid duplicate symbol conflicts
- Replace GLEW::GLEW with glad in libslic3r_gui link libraries
Note: GLEW is kept in deps for OpenCSG. Code migration from GL/glew.h
to glad/gl.h headers will follow in Phase 3B+3C.
* Fix Phase 3A+3D: libvgcode GLAD include, dead files, dlopen dep, OpenGL link var
* Migrate from GLEW to GLAD: replace headers and API calls across codebase
Replace all #include <GL/glew.h> with <glad/gl.h> across 49 source files.
Migrate GLEW API calls to GLAD equivalents:
- glewInit/glewExperimental -> gladLoaderLoadGL()
- GLEW_EXT_* / GLEW_ARB_* extension checks -> GLAD_GL_EXT_* / GLAD_GL_ARB_*
- Remove GLEW-specific EGL/GLX mismatch #error guards (not needed with GLAD)
- Replace unavailable EXT symbols with core GL equivalents in
GLCanvas3D.cpp (GL_MAX_SAMPLES, glRenderbufferStorageMultisample,
glBlitFramebuffer, GL_READ/DRAW_FRAMEBUFFER)
- Update log messages from glewInit to gladLoadGL
* Fix Phase 3B+3C: remove GLEW find, clean EXT symbols, update attribution
- Remove find_package(GLEW) block from root CMakeLists.txt since GLEW
is no longer linked by any main application code
- Remove "glew" from SLIC3R_STATIC option description
- Replace all remaining EXT framebuffer symbols with core equivalents
in render_thumbnail_framebuffer_ext and _rectangular_selection_picking_pass
- Update AboutDialog credits from GLEW to GLAD
* Enable EGL in wxWidgets and add runtime GLX/EGL selection for Wayland
- Set wxUSE_GLCANVAS_EGL=ON in wxWidgets build and Flatpak manifest
- Add PreferGLX() call on X11 sessions for driver compatibility
- Remove Phase 2 safety fallback (EGL is now always compiled in)
- Guard SwapBuffers against hidden canvases to prevent Wayland stalls
* Fix Phase 4: move PreferGLX to app startup, fix FPS counter guard
Move wxGLCanvas::PreferGLX() from OpenGLManager::create_wxglcanvas()
(static initializer) to GUI_App::on_init_inner() before any wxGLCanvas
is constructed. This prevents a race where SkipPartCanvas could trigger
wxGLBackend::Init() before the GLX preference is set. The new location
also adds explicit is_running_on_wayland() detection with a warning for
unknown backends.
Move increment_fps_counter() inside the IsShownOnScreen() guard so FPS
is only counted when a frame is actually swapped.
* Update GLFW from 3.3.7 to 3.4 for runtime Wayland/X11 backend selection
Replace the compile-time GLFW_USE_WAYLAND flag (which locked to a single
backend) with GLFW 3.4's GLFW_BUILD_WAYLAND + GLFW_BUILD_X11 flags that
build both backends and auto-select at runtime based on the available
display server. This enables the CLI thumbnail renderer to work on both
Wayland and X11 sessions without separate builds.
* wayland: Fix UI call sites that rely on global screen coordinates
On Wayland, wxGetMousePosition() returns (0,0) and SetPosition() is a
no-op for top-level windows. Fix the highest-impact call sites:
- GLCanvas3D: Use cached m_mouse.position from event handlers instead
of wxGetMousePosition() + ScreenToClient() in get_local_mouse_position()
- Plater: Use event-relative coords via ClientToScreen(e.GetPosition())
instead of wxGetMousePosition() in 3 leave-window handlers
- BBLTopbar: Use event.GetPosition() and FindToolByPosition() directly
in mouse handlers instead of wxGetMousePosition()/FindToolByCurrentPosition()
- Search: Use focus-based dismiss logic on Wayland instead of
wxGetMousePosition()-based rect checks in SearchDialog and
SearchObjectDialog
- GUI_App: Skip SetPosition() in window_pos_restore() on Wayland where
it is a no-op; still restore size and maximize state
- Button: Position tooltip relative to button widget via ClientToScreen
instead of wxGetMousePosition()
* Fix SearchDialog Wayland dismiss: guard against search_line focus
* flatpak: Add Wayland socket permission for native Wayland support
* spec
* Fix crash on Wayland when wxWidgets lacks EGL support
Restore the safety fallback that forces GDK_BACKEND=x11 when wxWidgets
was not built with wxUSE_GLCANVAS_EGL=ON. Without this, the GLX backend
tries to access a non-existent X11 display on native Wayland, crashing
in wxGLCanvas::IsDisplaySupported() with SIGSEGV at offset 0xe4.
Also add a defense-in-depth guard in detect_multisample() that skips
the IsDisplaySupported call entirely on Wayland without EGL.
Root cause: deps/wxWidgets must be rebuilt after enabling EGL. The
compile-time check in OrcaSlicer.cpp detects the mismatch and falls
back safely.
* Fix EGL detection: use wxHAS_EGL instead of wxUSE_GLCANVAS_EGL
wxUSE_GLCANVAS_EGL is a CMake build option, NOT a C++ preprocessor
macro. The actual macro defined in wxWidgets setup.h is wxHAS_EGL.
All compile-time EGL checks were using the wrong macro, causing
the safety fallback to always trigger even with a properly built
EGL-enabled wxWidgets.
* Fix GL function pointers invalidated on Wayland/EGL
gladLoaderLoadGL() dlopen's libGL.so.1 to resolve GL function pointers
via dlsym, then immediately dlclose's the handle. On X11/GLX this is
fine because the GLX context keeps libGL.so mapped. On Wayland/EGL,
nothing else holds libGL.so open, so dlclose unmaps it and all function
pointers become dangling — causing SIGSEGV on the first GL call.
Fix: on Wayland, use gladLoadGL(eglGetProcAddress) which resolves
function pointers through the EGL loader without opening/closing
libGL.so.
* fix crash on start and various rendering issues
* fix crash on close
* small refactor
* move GPU selection to desktop file
* clean up a bit
* clean up more
* fix appimage error
* Linux: prefer discrete GPU on dual-GPU systems via PRIME environment variables
Set DRI_PRIME=1 for AMD/nouveau PRIME setups and __NV_PRIME_RENDER_OFFLOAD/__GLX_VENDOR_LIBRARY_NAME for NVIDIA proprietary driver, only when the NVIDIA kernel module is detected. Uses replace=false to respect user overrides.
* Improves usability on Linux. No more double title bar (#12600)
* Fix double title bar on Linux by removing WM decorations for GTK
* wip
* fix
* finish
* address review comment
When running under XWayland (Wayland sessions with GDK_BACKEND=x11),
WebKit2GTK's compositing mode can fail silently, causing the Setup
Wizard WebView to freeze or render blank. This leaves users stuck on
the "Loading......" screen indefinitely.
Changes:
- Set WEBKIT_DISABLE_COMPOSITING_MODE=1 to force software rendering,
matching the fix used by BambuStudio
- Enable the 20-second timeout fallback in load.js so the wizard
proceeds even if the C++ -> JavaScript signal fails
use the shared printable area
jira: no-jira
Change-Id: I23e97a06b0ca9573c84fe4081496bae2e8e92382
(cherry picked from commit 3245ea6f6dd54bfaae30e76c903abfd632972544)
report from cloud team
jira: no-jira
Change-Id: I880d0fbf0ee6fac00eded9e8b3f52c0cfb6de870
(cherry picked from commit 1128c0087e980f70865dff6185f1f7ad540cf6db)
Hanif Koh