46 files include the same header twice at file scope, outside any #if,
66 times in all:
Model.cpp included Model.hpp twice, Utils.hpp <algorithm> and
<string_view> twice, seven GUI headers <wx/dataview.h> and
<wx/artprov.h> twice. The second include of each is removed.
GCodeSender.cpp and GCodeSender.hpp have been commented out of
libslic3r/CMakeLists.txt since 2022 and their only two includes are
commented out as well. Both files go, with the commented lines, and
the CMake entry for SLA/SupportTreeIGL.cpp, a file that no longer
exists.
* Add Missing Includes Across src/slic3r/GUI
Every GUI source and header now directly includes the headers declaring what it uses, rather than relying on the precompiled header or transitive includes. Generated with clang-tidy misc-include-cleaner, plus one hand edit making CalibrationPanel.hpp self-contained.
* Drop the OS-Specific Includes Added Outside Their Platform Guards
GLib, GTK, D-Bus and POSIX headers are only used inside platform #if blocks, which already include them. Added unconditionally at the top of the file they broke the Windows build.
* Add the clang-tidy Configuration That Generated These Includes
Only misc-include-cleaner's missing-include check, with the headers it must never suggest: per-platform, internal and OS-specific ones that would break other platforms or are not meant to be included directly.
* Match Windows Paths in the clang-tidy Ignore List
Header paths use backslashes on Windows, so every / in a pattern is now [/\\]. The Windows SDK headers are ignored alongside the other OS-specific ones, and the list is one pattern per line. Suggested by @raistlin7447 from a Windows clang-cl run.
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
Multi-nozzle sync widget, AMS rack-nozzle mapping popup, calibration rework, send-dialog nozzle mapping and extruder-count UI. Includes the fix to persist the AMS sync badge on filament cards (H2C/A2L and direct-sync printers).
after matching the untreated material
jira:STUDIO-10062
Change-Id: I699fd843600182bc87b224eee488e752b64ca0b4
(cherry picked from commit 29b0be89eb5190bd83d783bf173f14950aef738d)
jira:[Popup for multi nozzles]
Change-Id: I07e6d8f0469d2dcf0037d53e2ca8e22de78ca233
(cherry picked from commit 0924fce6858654c331eafcb91e43252f62e703bf)
HanifKoh