* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
The CFS-aware filament sync resolves its agent via switch_printer_agent(),
which reads the preset's `printer_agent` field and falls back to "orca" when
unset -- so the K-series presets need printer_agent="crealityprint" (the id
registered by CrealityPrintAgent) in addition to host_type="crealityprint"
(classic PrintHost/LAN-discovery). Without printer_agent the Device-tab sync
defaults to the Orca agent and CFS sync doesn't engage. Set both on the
F008/F012/F021 models that supports_multi_color_print() covers (not K2 SE).
Both keys are in s_PhysicalPrinter_opts, so a new Physical Printer inherits
them from the preset.
* K2 Plus: add print area bounding box for adaptive bed mesh
The K2 firmware reads MINX/MINY/MAXX/MAXY gcode comments to
determine the adaptive bed mesh area. Without these, it falls
back to full bed mesh even when calibration is enabled.
K2 Pro also reads these comments (its profiles already had them).
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* K2: add print area bounding box for adaptive bed mesh
Same change as K2 Plus — prepend MINX/MINY/MAXX/MAXY gcode comments
so firmware can determine the adaptive bed mesh area.
K2 Pro already had these.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* Creality: bump profile version to 02.03.02.72
Signed-off-by: Igor Mammedov <niallain@gmail.com>
---------
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
