/run/build/BambuStudio/src/libslic3r/GCode/WipeTower.hpp:31:12: error: ‘TriangleMesh’ does not name a type
31 | static TriangleMesh its_make_rib_tower(float width, float depth, float height, float rib_length, float rib_width, bool fillet_wall);
| ^~~~~~~~~~~~
<snip>
/run/build/BambuStudio/src/libslic3r/GCode/WipeTower.hpp:33:12: error: ‘Polygon’ does not name a type
33 | static Polygon rib_section(float width, float depth, float rib_length, float rib_width, bool fillet_wall);
| ^~~~~~~
<snip>
/run/build/BambuStudio/src/libslic3r/GCode/WipeTower.hpp:200:21: error: ‘Polylines’ was not declared in this scope
200 | std::map<float, Polylines> get_outer_wall() const
| ^~~~~~~~~
<snip>
(cherry picked from commit ea2c021427dddcddb8a4e9e41c0f649dd727fdf9)
1. set wipe tower real height
2. fix wipe tower small arc error
3. add rib_width constraint to ensure that the rib wall of the wipetower are attached to the infill.
jira: STUDIO-10540
Change-Id: Idfdc809f0236121d98587ac2a09a2ebbf5caf945
(cherry picked from commit 3a7dcfd23249571224a4d538c55907a0a5c6154d)
and fix conflict checking when the wipe tower's brim fully encloses the model
jira: STUDIO-10237, STUDIO-10296
Change-Id: I6e2a6640c06ddb6b3af700c9048fa26434411631
(cherry picked from commit b36c41e5146168325d8b7ec966eb97f1062442a7)
and fix the nozzlechange's error cleanbox.
and fix some error in interface's nozzlechangle and toolchange.
jira: none
Change-Id: I2fd5c68d90506fcb8f01f09a8246dfb5838baef4
(cherry picked from commit 6c5b63db246a1f42e34225c5561fb8b0975da53b)
and set the contact surfaces of different material types as solid,
and reduce the nozzlechange speed if it occurs at the contact surface,
and recuce the toolchange speed if it occurs at the contact surface.
jira: none
Change-Id: I884d60f4114544dfa959bd654ecc985f5fb9aac4
(cherry picked from commit ed7bfd3ff6732efe6c7e9eb96901be1db00bb3d0)
1. the nozzle change gcode use double perimeter width
2. fix the error layer height for adaptive layer height
3. limit the nozzle change speed to 50 when a bridge is detected
4. fix the error extrusion flow for filament change gcode when a bridge is detected
jira: STUDIO-10269
Change-Id: I580c618555fe19d000a56e2510a42004722c1b8b
(cherry picked from commit 5c56b43166ab32b09da31b7046efbbcbe3cbc9c8)
of the wipe tower's outer wall to use the actual outer wall path.
jira: none
Change-Id: Ib45ecbc328c88c1abe6d9e8567f715331a3ddd37
(cherry picked from commit 0a20f1fe6d6d63cdcb13bc19fd9ae553f45b6f59)
1.Add automatic calculation of the wipe_tower's brim width by height；
2.modify the min_depth_per_height and the default ridwidth
jira: none
Change-Id: Idd96bc90e8e631aa8481b559e1e9fec24c6b822f
(cherry picked from commit 4dd4e9e12c02d945a0ac3fd2020f75313c5b2cc9)
and and modify the start position for tpu
jira: none
Change-Id: I75b09e7839ddd3b9fffe77392e573e1d8caa00d5
(cherry picked from commit fce47aa8cb59fb718ff30a7c7eebda30fc83119d)
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
(cherry picked from commit 17771d0fbf753dd22411ce490586958bd643264e)
and modify the min_depth_per_height
jira: none
Change-Id: I4860df661b4dd1f66677112d14e60560bc4a73be
(cherry picked from commit 00810d685d01a91b5373f3315413aaef1fe49cbc)
and modify the overlap of wall and infill for wipe tower
jira:none
Change-Id: I0d1355c718e2bd1efea6d898f793f5869476ab12
(cherry picked from commit 4db196b11f052d6a7a7c7a8aafe0d2b34a7d2d80)
when support material is used in first tool change
Change-Id: If06459b8404fd599b42187859f476efded57deba
(cherry picked from commit 71f9ed69a3eff4cf3139d04a76176f798a1e1e0d)
