Port of snaporca c2821af783. New GeometryEngine::mass_properties over BRepGProp
(separate VolumeProperties/SurfaceProperties), bounds-checked
CadDocument::body_mass_properties, and a mass_properties MCP method. Query-only:
no CadFeature, no serialization, no version change. Analytic tests
(WithinRel/WithinAbs): cube 8000/2400/COM(0,0,10)/inertia 533333, cylinder
500pi/300pi, hollow = solid-500pi, invalid index -> valid=false.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Port of snaporca 04c3d579a7. Bump SNAPORCA_CAD_RECIPE_VERSION 1 -> 2;
deserialize_recipe sets a user-facing error distinguishing too-new / too-old
/ corrupt instead of a silent bare false. No per-version migration by design.
Golden fixture regenerated at v2 (v1 retired), field-value reorder tripwire
unchanged. Fork adjustment: Catch2 v3 string matcher ContainsSubstring
(not v2's Contains) in the two new version-mismatch tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
CadFeature::save/load is append-only by contract, and ~20 planned features
each append fields. The existing roundtrip test cannot police that: it writes
and reads with the same code, so any self-consistent ordering passes. Only a
blob written by older code and stored on disk can detect that the format moved.
The first attempt at this test passed while the defect was present. I proved
it by swapping draft_face (int) with draft_angle (double) in both save() and
load() -- a genuine byte-layout change -- and it still reported 613 assertions,
exit 0. It asserted only derived geometry: body count, per-body volume, feature
types. The golden document had no Draft feature, so those fields sat at their
defaults, the reorder scrambled values nothing read, and the recomputed solids
came out byte-identical.
So the fixture now asserts the DATA, not what the data produces:
- make_golden_doc_v1() builds 22 features across 14 types (Draft, Shell,
Revolve, Pattern, Cut, Hole, Chamfer, Fillet, Extrude taper/symmetric,
Thread, Sweep, Loft, Boolean, Plane) with distinctive non-default literals
(draft_angle 7.25, shell_thickness 1.375, revolve_angle 217, pattern_count 5)
so a reorder produces visibly wrong values rather than swapped defaults.
- Layer 1 reads the committed blob with raw cereal and asserts field by field,
independent of recompute, so a geometry regression cannot mask a format break.
- Layer 2 keeps the geometry checks as a separate concern.
Verified to trip, twice, by deliberate breakage rather than by assertion:
draft_face <-> draft_angle -> draft_face reads 1075642368 (0x401d0000),
the high half of double 7.25
revolve_angle <-> revolve_axis -> revolve_angle reads 0.0, not 217.0
Both revert clean to 758 assertions / 30 cases.
Also scoped the "regenerate the fixture" hint to the feature-count check only.
It was in scope for every assertion in the block, so a detected reorder told
you to run [.regen] -- which would bake the corrupted layout in as the new
golden and permanently disarm the test. A guard must not advise disabling
itself.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Ported from snaporca f9e0f99bcb. The patch needed fuzz: this fork's copy of
test_caddocument.cpp carries a Catch2 v3 include, a `using Catch::Approx`, and
an extra [Deviation] case appended after line 1611 -- exactly where these hunks
land. Verified after applying: new symbols present, the [Deviation] case
intact, braces balanced, and only WithinAbs/WithinRel used (both exist in v3).
Compile and test verification here is CI, not local: this fork needs Eigen
5.0.1 while the local deps image ships 3.3.
Adds scripts/kernel-test.sh: build the libslic3r_tests target and run the CAD
kernel tags, exit code as the whole contract. Clean build 4m36s, incremental
18s, no display needed -- every [CadDocument] case builds a CadDocument,
recompute()s it and asserts on geometry.
Four things this had to get right, each found by it going wrong first:
- SLIC3R_GTK=3 and BUILD_TESTS=ON are mandatory. src/CMakeLists.txt turns
SLIC3R_GTK into 'wx-config --toolkit=gtk<N>', so omitting it asks for
toolkit "gtk", nothing matches, and configure dies with the thoroughly
misleading "Could NOT find wxWidgets" -- while wx-config sits right there
in the deps prefix, working. BUILD_TESTS=ON is what creates the target.
- Configure runs unconditionally. Guarding on "CMakeCache.txt exists" is
wrong because a FAILED configure writes that file too, after which the
guard skips reconfiguring forever and every later run silently reuses the
poisoned cache, ignoring corrected flags.
- A new build volume is always built clean. Cloning a warm cache from
another tree is a correctness trap: rsync preserves source mtimes, ninja
compares them against foreign object timestamps, concludes everything is
current and relinks stale objects. That produced a binary containing NO
[CadDocument] tests at all -- while exiting 0. A green run that tests
nothing is worse than a red one.
- --host builds where the deps image already lives, staged per volume so
parallel workers never share a tree.
The two [known-broken] tags: "entity constraints: tangent/midpoint/symmetric/
angle" aborts inside the vendored solver (slvs/dsc.h FindById, "Cannot find
handle"), and SIGABRT is fatal to the Catch2 process -- that single case took
the suite down at 12 of 31, so a green baseline was unreachable. The thread
groove case is a plain pre-existing assertion failure. Both are excluded from
the dev loop's default filter ONLY; ctest in CI still runs and reports them,
so neither bug is hidden. Baseline is now 603 assertions / 29 cases green,
which is what makes "I broke nothing" a meaningful statement.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
When a per-layer nozzle grouping migrates a filament across nozzle
variants, the write-back turns two groups of config arrays from
filament-indexed into column-indexed: the per-variant filament options
(one column per variant a filament uses) and the merged extruder
retract overrides (resized to the column count by apply_override).
Export-path readers that still indexed them with the raw filament id
read a neighbor's column for every filament ordered after a migrating
one: toolchange/standby temperatures (M104/M109), retraction lengths
and feedrates, wipe distance, z-hop types, air-filtration keys, and -
through the Extruder's cached flow term - the extrusion E of every
move.
Now every such read resolves its column through the existing
layer-aware resolver (get_filament_config_index ->
Print::get_filament_config_indx), which returns the raw filament id
whenever no per-layer grouping result is published, so static prints
are byte-inert by construction. The Extruder itself has no layer
knowledge, so it gains an injected config column (set_config_index,
default = filament id) that the generator refreshes at the only two
resolution-changing events - layer change and writer toolchange - and
that re-syncs the cached e_per_mm3 flow term. Old-filament reads
resolve at the current layer, which is safe because the per-layer maps
are gap-filled carry-forward. Whole-array placeholder copies
(toolchange temperature overrides) are rebuilt in filament order,
mirroring the existing per-variant placeholder remap. The resolvers
move to the public section so non-friend helpers (ooze prevention) can
resolve too.
Documented, deliberately unchanged: the wipe tower's per-filament
parameter rows (no layer dimension; tower x per-layer grouping is a
follow-up), travel_slope's physical-extruder read, estimator pre-heat
bookkeeping temps, and index-0 header diagnostics.
Verification: new Extruder column-injection scenario (defaults, column
follow + flow-cache rescale, filament-indexed reads unaffected, reset
semantics) and a migrating write-back case proving the column shift for
filaments ordered after a migrator and the resolver tracking it (11 +
14 assertions); suites green (libslic3r 48998/169, fff_print 655/61);
20/20 pinned-slice byte gate bit-identical (incl. sequential repro x2
deterministic).
When the per-layer filament selector (enable_filament_dynamic_map)
migrates a filament across nozzle variants (e.g. Standard -> High Flow),
the config write-back only stored the derived extruder map; every
per-variant filament value (retraction, nozzle temperature, flow,
flush...) kept the numbers resolved from the pre-slice static mapping.
Now both dynamic write-back sites (the by-layer branch and the
sequential stitch) branch on the result's dynamic support. Migrating
results run a mixed-filament expansion that regathers every
filament_options_with_variant key from the pristine per-variant
superset, giving a migrating filament one config slot per (extruder
type x nozzle volume type) it lands on - filament_self_index,
filament_extruder_variant, and all value arrays grow in lockstep - and
recompute the retract overrides with per-slot machine indices so a nil
slot falls back to its own variant's machine value. Non-migrating
dynamic results take the merged three-map write-back so re-applies
reproduce from the written maps. Unrouted filaments resolve from the
result's own default map, so slot resolution never depends on
filament_map round-tripping through the plate config.
Print::apply reproduces the identical expansion from the persisted
group result (shared dedupe helper, expansion function, and slot
indices on both sides): the expanded keys sit in the psWipeTower /
psGCodeExport invalidate lists, so without the reproduction every
re-apply after a selector slice would diff non-empty and permanently
invalidate. cal_non_support_filaments now resolves the extruder per
layer from the published result for dynamic groupings.
filament_map_2 keeps its apply-time static derivation; nothing on the
dynamic path reads it (the per-slot machine indices key the override
merge), and per-(extruder x volume-type) machine limits in the g-code
processor remain a documented follow-up.
Every change is gated behind is_dynamic_group_reorder() or a persisted
result with dynamic support; no profile sets the flag, so the static
fleet's instruction stream is unchanged (20/20 pinned-slice byte gate
identical, incl. the sequential repro sliced twice, deterministic).
Tests: expansion unit coverage (migrating slots, unrouted fallback via
the default map, mis-sized volume map ignored, nullable retract keys in
lockstep, slot machine index layout), an end-to-end stub-driven
write-back asserting expanded slots, per-layer config-index resolution,
the override merge incl. the nil-slot variant fallback, and re-apply
stability, plus a real selector slice staying valid across re-apply.
Suites green (libslic3r 48987/168, fff_print 633/60).
Sequential (by-object) prints were incoherent with the per-layer filament
selector (enable_filament_dynamic_map): the by-object branch published a
static grouping while each per-object ToolOrdering independently ran the
dynamic planner from an empty nozzle status and wrote its own map to the
config (one write per object, last object wins). The exported toolchange
sequences then disagreed with the published result that drives the
per-layer maps, placeholders, and selector emission.
Now the by-object branch, when the selector is enabled, plans each unique
object once — threading the physical nozzle occupancy and the previous
object's last filament into the next plan — stitches the per-object
per-layer nozzle maps into one print-wide result (gap-filled by the new
normalize_nozzle_map_per_layer so any layer index resolves a filament's
nozzle consistently), publishes it, and writes the derived extruder map
back once. The plans are cached on the Print and g-code export consumes
the cache: the ToolOrdering seed changes the plan input (dontcare
assignment, first-layer reorder), so a fresh export-time construction
could re-plan differently from the published stitch. The per-object
dynamic write-back is gated off for sequential prints.
Every change is gated behind is_dynamic_group_reorder(); no profile sets
the flag, so the static fleet's instruction stream is unchanged (20/20
pinned-slice byte gate identical, incl. the by-object repro sliced twice).
Tests: normalize unit coverage (carry-forward, back-fill, ragged input),
stitched-blocks selector detection, and an end-to-end by-object selector
slice (apply -> process -> export) asserting the published stitched
result, one cached plan per object, the config write-back, and a clean
export. Suites green (libslic3r 48958/165, fff_print 633/60).
* ENH: config: add logic to apply params to object/region config with multi-extruder
JIRA: no-jira
Change-Id: Ieab98cd8d031e5ca82a3aad2d0b89d8ae4a794f1
(cherry picked from commit 3179fd416e68ca8bc2d746f859508d07db18fe5b)
* FIX: X1C switch to H2D lose Highflow parameter
Jira: STUDIO-15272
Change-Id: Id8cf5d93a49d5542ac82f9554974b458e15c1193
(cherry picked from commit 15d9f072ff658a3beb4f916d978dfea12c2d9f16)
* Fix mishandling of `stride` param and add unit test for it
* Fix modified multi-variant per-obj option highlight
* Fix issue that per-obj FloatsOrPercents options are marked as dirty incorrectly when lost focus
---------
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: weiting.ji <weiting.ji@bambulab.com>
Print::apply rebuilds m_config.filament_map_2 to the real per-filament slot
map on every apply, while the incoming full config only ever carries the
ConfigDef default. The resulting phantom one-key print_diff hit the
invalidator's catch-all branch and killed every print-level step on each
apply, so on multi-extruder printers a fresh slice result was invalidated
the moment the GUI re-applied after slicing completed.
Dropping the key from print_diff loses no information: it is never a user
input, and the rebuild derives it from filament_map, filament_volume_map
and the variant slots, each of which is diffed and invalidation-listed on
its own.
Regression test: re-applying an unchanged config after process() must not
invalidate psSlicingFinished (fails with APPLY_STATUS_INVALIDATED without
the fix). Suites green (libslic3r 48891/154, fff_print 631/59); 19-fixture
byte gate identical incl. the Hybrid repro project, determinism x2.
- the g-code writer tracks the current layer id and resolves
FILAMENT_CONFIG/NOZZLE_CONFIG (plus every non-macro variant lookup,
toolchange placeholder scalars, and the change-filament flush
overrides) through Print's per-filament, per-layer config-index
resolvers instead of the filament->extruder collapse
- update_layer_related_config refreshes the per-layer
extruder/volume/nozzle maps in the writer config;
update_placeholder_parser_with_variant_params remaps the
filament-variant arrays into filament-id space for custom g-code
(Orca's flush placeholder computation moves inside it)
- the engine's concrete per-filament volume assignment now merges into
the config write-back (the temporary hold from the producer commit
is lifted together with these consumers), and the background process
reads the computed volume map back to the plate
- append_full_config dumps the resolved filament_map_2 slots
- update_used_filament_values gains a bounds guard
- tests: per-filament Hybrid slot resolution + null-result fallback
Result: on a Hybrid extruder, each filament's features slice with its
assigned sub-nozzle's variant values (speeds, volumetric limits,
retraction). Verified on a 4-filament H2C Hybrid project: outer walls
split into three feedrate populations (30/50/200 mm/s), toolpath
geometry byte-identical, deterministic across repeated slices. All 18
non-Hybrid reference fixtures stay byte-identical except the
filament_map_2 header value now showing the real slot. Auto grouping
ties (multiple zero-flush perfect matchings) may pick a different
filament-to-nozzle isolation than other slicers; verified co-optimal.
Opening an STL/OBJ in the Design pane now rebuilds it into a real OCCT B-rep
solid that the face/edge feature tools can operate on, instead of a print mesh.
GeometryEngine::mesh_to_brep is a native C++ port of mesh2step
(github.com/tommasobbianchi/mesh2step): vertices and edges are shared across
triangles at construction time (vertex cache by deduped index, edge cache by
unordered index pair), so no BRepBuilderAPI_Sewing pass is needed to rebuild the
topology afterwards, and watertightness falls out of the edge-usage counts for
free. An open mesh is returned as a shell and reported as such — never dressed up
as a fake solid.
It runs in-process on the OCCT kernel libslic3r already links, so no STEP file is
written or re-read. That is not an optimisation but the whole point: a faceted
STEP of a 62k-triangle mesh is ~149 MB and OCCT's STEPControl_Reader takes >300 s
to parse it back, so routing this through a file would hang the GUI.
Coplanar neighbours are merged (ShapeUpgrade_UnifySameDomain, 5° default) so the
body arrives with pickable CAD faces rather than one face per triangle — on the
20,656-triangle test part that is 20,614 faces down to 4,784. Without it the
import is technically a solid but nothing you can meaningfully fillet or extrude.
- Design pane: "Import mesh" button + Shift+M; warns above 50k triangles.
- MCP: import_mesh {path, tolerance, merge_angle_deg}, returning the full
conversion stats so a caller can tell an honest solid from an open shell.
- Catch2: cube round-trip (exact volume, 12 faceted faces, 6 after merge), open
mesh stays a shell, and the scale-independent sliver rule that a naive
area < tolerance^2 test would get wrong.
Verified end-to-end on the real 20,656-triangle ir3v2 hotend STL: reproduces
mesh2step's Python run exactly (20,614 kept, 42 degenerate, 0 boundary edges,
2 non-manifold edges, not watertight) and the resulting body's bbox matches the
one FreeCAD reports for the same part.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
- Print::get_nozzle_config_index / get_filament_config_indx resolve a
filament's variant slot per layer from the nozzle group result, with
hashed index caches; when no group result is published (sequential
prints), they fall back to the static filament->extruder mapping so
behavior is unchanged
- filament_map_2 caches each filament's resolved print-variant slot;
rebuilt in Print::apply after the filament_map diff handling and in
the filament-map write-back
- filament retract overrides now key by slot indices: apply_override
fallback indexing flips to 0-based, Print::apply passes
filament_map/extruder indices, the write-back passes filament_map_2
(identical resolution while slots equal extruders)
- filament_volume_map/filament_nozzle_map/filament_map_2/
filament_self_index become PrintConfig static members (required for
member access); grouping input guards tightened so their registered
1-element defaults are never mistaken for real per-filament maps
(single-filament manual mode keeps the mix-marker fallback)
- update_filament_self_index_cache refreshed at every full-config
assignment
- tests: 0-based apply_override fallback, get_config_index_base
hit/miss/mixed-type cases
The resolvers are not consumed by the g-code writer yet. Non-Hybrid
g-code is unchanged except the config header, which now serializes the
three new static keys (defaults until the per-filament producer lands);
verified by the 19-fixture byte gate: 3 added header lines per fixture,
zero motion changes.
- get_extruder_nozzle_volume_count derives per-extruder volume-type slot
lists from extruder_nozzle_stats (absent stats = one slot per extruder)
- update_values_to_printer_extruders learns the slot layout: when any
extruder mixes volume types, option arrays keep one slot per
(extruder x volume type), extruder-ascending then volume-ascending;
single-slot resolution takes the filament's volume type on mixed
extruders
- update_values_to_printer_extruders_for_multiple_filaments applies a
per-filament nozzle_volume_type override from filament_volume_map
(when sized to the filament count) and remaps filament_self_index
through the same pipeline as every other filament key
- get_config_index_base + is_auto_filament_map_mode helpers (consumers
land with the per-filament config-index resolvers)
- callers updated: PresetBundle composition paths, PrintApply (counts
hoisted above the extruder_applied guard), Print write-back
- new tests: slot counting, Hybrid slot expansion incl. stride 2,
per-filament override, non-Hybrid degeneracy
Non-Hybrid printers keep their variant layout and values (proven by a
19-fixture byte gate; the only header delta is filament_self_index now
flowing through the same variant pipeline as its sibling filament
keys). Hybrid slices grow the config-block variant arrays to one entry
per sub-nozzle volume type; motion g-code is unchanged until the
g-code writer consumes the new slots.
Gate the entire parametric Design/CAD subsystem behind a single CMake
option so the fork can be built with or without it. With SLIC3R_CAD OFF
the build is behaviour-neutral against upstream OrcaSlicer; this is the
"parallel build" for upstream integration discussion.
Gated surface:
- option(SLIC3R_CAD) + add_definitions(-DSLIC3R_CAD)
- deps/OCCT/OCCT.cmake: BUILD_MODULE_ModelingAlgorithms=${SLIC3R_CAD}
(OFF matches upstream OCCT exactly; ON adds only TKFillet + TKOffset)
- TKFillet/TKOffset link, add_subdirectory(slvs) + libslvs
- CAD kernel + GUI sources, GLGizmoPrimitive (needs GeometryEngine),
CAD Catch2 tests
- 11 upstream C++ hook sites (GLCanvas3D, MainFrame, GLGizmosManager)
- TabPosition and gizmo EType enums switched to implicit numbering so
OFF reproduces upstream indices exactly
Verified on behemoth both ways: OFF and ON link snapmaker-orca +
libslic3r_tests (exit 0); ON shows the Design tab and passes 8 [design]
+ 1 [Deviation] tests, OFF omits them and shows upstream's tab layout.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
G-code post-processing is now a step of the slicing-pipeline plugin rather than a
separate capability type. One capability class can transform slices at the geometry
seams AND edit the final G-code, behind a single picker/option.
- Add SlicingPipelineStepPlugin::psGCodePostProcess (bound as
orca.slicing.Step.psGCodePostProcess). Unlike the geometry steps it fires from the
GUI export path in PostProcessor.cpp, not from Print::process(): ctx.print/ctx.object
are None and the plugin edits the file at ctx.gcode_path in place. It may run more
than once per slice (file export and/or upload) and its output is not shown in the
preview.
- Extend SlicingPipelineContext with gcode_path/host/output_name and a C++-only
full_config; config_value() falls back to it when there is no live Print.
- PostProcessor.cpp dispatches SlicingPipelinePluginCapability at psGCodePostProcess,
driven by the existing slicing_pipeline_plugin option.
- The exported G-code lives outside data_dir(), so the plugin audit sandbox would
block the write; the trampoline's audit setup grants ctx.gcode_path's folder as a
scoped allowed root, gated on a non-empty gcode_path so the geometry-step hooks gain
no extra filesystem access.
BREAKING CHANGE: the separate G-code post-processing capability type is removed.
- orca.gcode.GCodePluginCapabilityBase and orca.PluginType.PostProcessing are gone;
post-processing plugins migrate to orca.slicing.SlicingPipelineCapabilityBase +
Step.psGCodePostProcess (and gain ctx.params / ctx.config_value()).
- The post_process_plugin config option is removed; use slicing_pipeline_plugin.
Presets carrying the old key degrade to the standard unknown-key warning.
- Manifest type = "post-processing" now maps to Unknown (advisory only; the loader
dispatches on the C++ get_type()).
Also repairs two latent build breaks the branch carried: stale Step enum value usages
in test_slicing_pipeline_hook.cpp and a reference to the removed
ConfigOptionDef::PluginType::None in Tab::on_value_change (now is_plugin_backed()).
Adds the orca_gcode_stamp sample plugin and a psGCodePostProcess binding test.
Filament grouping already consumed per-filament forbidden nozzle volume
types, but every call site passed an empty map, so a variant-restricted
filament (e.g. one limited to "Direct Drive TPU High Flow") could be
auto-grouped onto an incompatible nozzle flow type on multi-variant
printers.
- add convert_to_nvt_type() to parse extruder variant strings
- add Print::get_filament_unprintable_flow(): forbidden volume types =
printer extruder variants minus the filament's declared variants;
filaments declaring no variants stay unrestricted
- feed the map into grouping at the by-object path (Print.cpp) and all
six mapping/planning sites in reorder_extruders_for_minimum_flush_volume
- unit-test the string parser
Non-restricted configurations produce an empty map, so existing
printers' grouping and g-code are unchanged.
round() already had unit coverage; floor() and ceil() had none. Add the missing
positive cases for both signs, plus round()'s half-away-from-zero tie-break, and
one negative case asserting that a name outside the grammar's built-in function
set is treated as an undefined variable and throws, rather than being passed
through to a math library.
* fix: prevent out-of-bounds crash in Arachne beading interpolation
SkeletalTrapezoidation::interpolate() derives an inset index from `left` but
uses it to index the merged beading, which follows the thicker of left/right.
When the thicker side has fewer insets, the index runs past the end and the
slicer crashes during "Generating walls".
Skip the adjustment when the index is out of range, as the adjacent guards
already do. interpolate() uses no instance state, so make it static and add a
regression test that exercises it directly.
Fixes#14584
feat: add regex_replace() string transform to filename templates
The filename template language could test strings (=~, !~, one_of) but
never rewrite one, so there was no supported way to reshape a placeholder
value, such as dropping a file extension from {first_object_name}.
Add regex_replace(subject, /pattern/, replacement), reusing the existing
regex-literal syntax and boost::regex engine. Every placeholder keeps
returning its exact value and the template does the transform explicitly:
{regex_replace(first_object_name, /\.[^.]*$/, "")} strip any extension
The replacement may reference capture groups ($1, $2, ...). It is one
grammar function mirroring digits(), with the name registered as a keyword
so it is not parsed as a variable.
Adds PluginHostSlicing, which registers the print-graph data model (Print,
PrintObject, Layer, LayerRegion, Surface, ExPolygon, extrusions, ...) into the
orca.host submodule in the same raw-class style as PluginHostApi's Model/Preset
graph, with shared helpers in PluginBindingUtils. SlicingPipelinePluginCapability
is trimmed to the capability surface (the standalone SlicingNumpy helper is folded
away). Adds the Twistify example plugin next to Inset and broadens the binding,
hook, and plugin-install tests.
On Linux every account shares /tmp, but slicing builds temp paths there under
fixed, app-owned names via temporary_dir() (model backups, STEP import,
part-skip). The first user to slice creates and owns those dirs, so the next
user cannot write under them and slicing crashes with "No such file or
directory".
Tag the app temp root with the user id at startup (<temp>/orcaslicer_<uid>)
so every temporary_dir() consumer is isolated at once. The id stays at the
top level of the world-writable system temp so each user's dir is created
directly there; a shared parent dir would be owned by whichever user made it
first. The root is pre-created because STEP import writes into it directly.
Windows keeps the plain temp dir since it is already per-user.
Fixes#10108. Same root cause as #5969.
Implements phase v3.0 of filament_id_plan_v3.md - tooling and client
prerequisites. No filament_id values change in this commit.
Tooling (scripts/assign_filament_ids.py; 106 unit tests):
- The mint key becomes "filament_product/<filament_vendor>/<filament_type>/
<family_name>", resolved loader-faithfully from the declarer's flattened
config - bundle-independent and content-addressed; identity fixes re-id
by design and are made safe by the succession ledger. --mint now takes
the triple.
- The snapshot gains "triples" and "triple_exceptions" sections, folded
into the equality gate: any vendor/type/name change surfaces as a
reviewable snapshot diff. Check 3 rewritten to triple-mint conformance
with (id, triple) grandfathering; check 5 generalized from OFL generics
to every OFL-riding vendor preset; new check 8 (triple integrity) and
check 9 (succession integrity).
- The retired ledger moves to resources/profiles/retired_filament_ids.json
so it ships with the app; schema {claims, successor} plus cross-island
"hints". The 14 v1 entries are migrated with mode-rule successors.
Vanished ids in a foreign island's space (GF*/QD_*) are RELEASED with a
hint instead of retired: the island catalog owns them and may
legitimately (re)ship them, which check 4 must never block.
- New maintenance modes: --remint VENDOR, --drop-redundant-ids VENDOR,
--add-hint "OLD=NEW", and --update-snapshot --forget-never-shipped FILE
(never-shipped ids drop from lineage; chains splice through them).
Runtime (C++):
- Succession helpers in libslic3r/Preset (pure chain-follow + lazy ledger
load from resources), consulted only on resolution miss in
get_filament_by_filament_id, both AMS sync predicates,
add_ams_filaments, setting_id_to_type, and the calibration-history
lookup; behavior is byte-identical while the ledger has no matching
entry. Catch2 coverage in tests/libslic3r.
- W1 hardening: check_ams_filament_valid no longer remote-wipes trays or
rewrites temps for P-shaped ids that a system preset carries (ten such
system ids ship today); the size==8 && [0]=='P' assert is relaxed; the
unguarded filament_list find deref in the temp-equation check returns
non-destructively on a miss.
- MoonrakerPrinterAgent: the 23 hardcoded OFL generic ids are replaced by
a runtime lookup of "Generic <family> @System" (id-equivalent on
today's shipped profiles, follows future re-mints automatically);
scripts/test_moonraker_lane_data.py derives its expectations from the
shipped profiles and gains --check-ofl-map.
Profile data (W3 - type is now a key component, so type bugs are fixed
before any re-mint):
- 17 same-name-different-type groups corrected across 50 files (OFL
Generic PETG-CF/PE-CF/PP-CF; Flashforge ASA Basic/ASA-CF/ABS-CF/HIPS/
PAHT-CF/PLA Silk; FusRock PAHT; Creality Generic PA6-CF; InfiMech PETG;
Anycubic TPU 95A / TPU for ACE; Prusa Generic PA-CF/PLA-CF) - every
value validated against MaterialType::all(); 3 Snapmaker U1 roots gain
their missing filament_vendor. Flattened-config equivalence vs the
previous commit: exactly the 54 intended diffs, zero BBL.
- doc/developer-reference/filament_id.md rewritten for the v3 rule.
Ambiguous type divergences (Prusa Generic TPU/TPU HF FLEX-vs-TPU, FusRock
S-Multi/S-PAHT) and all same-type vendor-tag divergences are deferred to
the v3.2 vendor worksheets, catalogued with analysis.
* Support accessing `coFloatsOrPercents` values in gcode template (OrcaSlicer/OrcaSlicer#14522)
* Vector option values are separated by comma
* Fix wrong cast used for checking nullability
gcc reads "\x10cad..." as one escape (c/a/d are hex digits → 0x10CAD > 255).
Split the string literal so the \x10 escape terminates. clang let it slide;
gcc (Linux/Windows CI) errored and blocked the OrcaSlicer build.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
orca_cad's test_geometry.cpp is upstream Catch2 v3 with no CAD suite, so the
surface_deviation check lives alongside the CAD tests here. Built + ran green
in orca_cad's kernel-test docker: All tests passed (4 assertions). Both forks
now carry the test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Port of the snaporca CAD work to the mainline fork.
- Onshape default planes (XY/XZ/YZ) at the bed centre (transparent, labelled);
modeling origin unified to the bed centre (CadDocument::modeling_origin);
world-axis triad moved to the bed centre on the Design canvas only.
- Datum plane: clickable ghost-plane base pick + draggable offset arrow.
- Slot: dims reassessed to inter-centre distance / radius / angle; fixed the
duplicate cap-arc radius quote.
- Hole: 3D cube move-handle on the face; binds to the face on the first click;
decluttered side-distance construction lines.
- Thread: derive the M spec (diameter/pitch/depth) from a picked cylindrical
surface or circular edge (GeometryEngine::circle_of_edge); fuse the helical
ridge onto the existing body; MakePipeShell fixed-binormal sweep (uniform, no
twist) + self-intersection/param guards.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Mirror of snaporca-cad a82cb0d. snaporca-88g — three [CadDocument] tests
proving recompute() replays the whole timeline, so editing any feature (not
just the last) rebuilds downstream: mid-timeline extrude edit -> fillet
rebuilds; first-feature sketch edit propagates the chain; the same survives
serialize_recipe()/deserialize_recipe(); a sketch->extrude->hole->chamfer
chain rebuilds hole+chamfer on a mid-edited extrude. All 3 pass (34 assertions,
Catch2 v3). on_edit_feature edits the tree-selected feature at any position
(13/16 types); Import/Boolean/Cut get a status message instead of a silent
no-op (full dialogs = follow-up snaporca-nu9).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
CalibPressureAdvancePattern::line_width_first_layer() returned the raw
initial_layer_line_width, so a value of 0 (which means "use the default")
fed 0 into the Flow spacing math and threw FlowErrorNegativeSpacing,
crashing the whole app when slicing a PA pattern calibration.
Mirror the guard already present in the sibling line_width(): when the
configured width is non-positive, fall back to auto_extrusion_width.
Add a libslic3r regression test covering the width resolution.
Fixes#13188
Mirror of snaporca-cad ad822bf. The earlier mirror (2c0140afb9) implemented
persistence in the PrusaSlicer 3mf.cpp, but the GUI saves/loads projects via the
BBS-native backend (store_bbs_3mf / load_bbs_3mf), so the recipe was never
written to nor read from GUI-saved projects.
- bbs_3mf.cpp: BBS_CAD_RECIPE_FILE = "Metadata/SnapOrca_cad.bin"; writer
_add_cad_recipe_file_to_archive (called after layer-height in store_bbs_3mf);
reader branch in _load_model_from_file's metadata dispatch loop (iterate +
iequals on m_filename — mz_zip_reader_locate_file does not work on these
archives).
- Plater.cpp: load_files carries the Model-level cad_recipe onto q->model().
- test_3mf.cpp: [3mf] test asserting store_bbs_3mf embeds the recipe entry
byte-for-byte (read back via miniz, Catch2 v3).
Verified on behemoth: libslic3r_tests + the new [3mf] BBS test pass; orca-slicer
GUI links clean. Round-trip verified live on snaporca-cad (identical code path).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Dual-fork mandate: port the parametric-recipe 3MF persistence from
snaporca-cad commits ed19eac+147e1c4 so a saved project reopens with the
editable CAD feature tree, not just the baked mesh.
Shared kernel/format/GUI (identical to snaporca-cad):
- CadDocument serialize_recipe/deserialize_recipe (cereal BinaryArchive,
versioned) + CadFeature split save/load + imported_solid<->BRep string.
- Model::cad_recipe carried through 3MF zip entry Metadata/SnapOrca_cad.bin
(writer + binary-verbatim reader branch).
- DesignPanel on_commit() stamps the recipe; on_tab_shown() rehydrates a
loaded project via load_recipe() (deserialize -> feed_bodies + refresh_tree).
Mainline-only adapters (no snaporca-cad counterpart — Catch2 v3 vs v2):
- tests/libslic3r/test_caddocument.cpp: <catch2/catch_all.hpp> +
`using Catch::Approx;` (v3 scopes Approx under Catch::).
- tests/libslic3r/CMakeLists.txt: register test_caddocument.cpp (the
original CAD port had left it out of the test build).
Verified on behemoth (snaporca-deps toolchain): libslic3r_tests clean;
[CadDocument] 17/18 (only the pre-existing tangent-to-circle SIGABRT fails,
identical to snaporca-tkz); K1 serialize round-trip + version-reject pass
(13 assertions); new [3mf] "CAD recipe blob survives a 3mf save/load cycle"
passes byte-for-byte; orca-slicer GUI links clean (186/186, DesignPanel.cpp
compiled). Interactive :10 click-through pending (no Design-tab automation).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
