Port of snaporca 9fa304c77a. Parity OK: 17 files identical, 8 diverging at their
expected counts.
The everyday dimension in SolidWorks and Onshape, and this kernel had no form of
it. Distance constrains the straight-line gap; LockX/LockY pin one point's
ABSOLUTE coordinate. Neither relates two points along an axis.
DistanceX/DistanceY emit SLVS_C_PROJ_PT_DISTANCE against two unit direction
lines built in the solver's G_FIXED group, so they add no degrees of freedom.
THE DIRECTION IS SIGNED, and getting it backwards is silent. libslvs defines a
LINE_SEGMENT's direction as point[0] - point[1] (entity.cpp) and
PROJ_PT_DISTANCE constrains (pB - pA).dot(dir) (constrainteq.cpp:234), so the
reference lines are built head-first to mean +X and +Y.
The same signedness was a real defect in the GUI: the inline editor was
pre-filled with |delta|, so when the closest endpoint pair ran right-to-left,
opening the dimension and accepting the number shown would flip the point to the
other side of its anchor. Opening a dimension and accepting its own value must
be a no-op. The refs are now ordered so the shown value is positive.
On the CAD-1000-hours corpus, dimensioning and constraining is 31.9% of all
observed CAD time -- the largest single class, 7.6x feature operations. This is
the item in the constraint epic that lands most directly on it.
VERIFICATION LIMIT, as with the previous commit: this fork's kernel suite still
cannot run (find_package(assimp) fails at configure time, snaporca-w80c). The
shared sources are byte-identical to snaporca's, where kernel is 2603 assertions
/ 200 cases and ALL LADDERS HELD across all seven rungs.
Port of snaporca 9ec6405e2d. Parity OK: 17 files identical, 8 diverging at their
expected counts (DesignPanel.cpp 32, test_slvs_constraints.cpp 3).
Measured on the CAD-1000-hours corpus: 51.5% of observed CAD time is 2D sketch
work, and dimensioning/constraining alone is 31.9% -- the largest single class.
Two constraints every industrial sketcher has were missing here.
EqualRadius fixes a dead end rather than adding a feature. Picking two circles
and pressing Equal emitted EqualLength, which maps to SLVS_C_EQUAL_LENGTH_LINES
and constrains nothing on a curve: a silent no-op with no error. Equal is now
one button with two meanings, as in Onshape and SolidWorks.
Collinear emits PARALLEL plus PT_LINE_DISTANCE=0 rather than PT_ON_LINE, whose
internal valP param this libslvs port leaves at 0, drifting an already-collinear
pair.
Both types are appended at the END of SketchConstraintType: cereal serializes it
positionally, so inserting elsewhere reinterprets every saved recipe.
VERIFICATION LIMIT, stated rather than implied: this fork's kernel suite could
NOT be run. scripts/CAD/run-kernel-tests.sh fails at CMake configure time on
find_package(assimp), before any source compiles -- a pre-existing deps gap
(snaporca-w80c), not this change. The shared sources are byte-identical to
snaporca's, where the full gate passed: kernel 2588/195 and ALL LADDERS HELD
across all seven rungs.
Also fixes two defects in this fork's scripts/CAD/run-all-checks.sh:
- `cd $(dirname $0)/..` landed in scripts/ instead of the repo root, so every
rung looked for itself under scripts/scripts/. Broken since the script moved
into scripts/CAD/; the three sibling scripts were fixed then and this was
missed, so the gate has not run since.
- C defaulted to snaporca-gui, the OTHER fork's rig container, so this fork's
gate would drive snaporca's app and report green about the wrong binary.
run-kernel-tests.sh:31 documents the identical defect being fixed once
already for the build volume; this is the third instance.
Two commits carried across (snaporca 579a9a9162, f68613cfc5).
Past about 480 entities a sketch had NO constraints at all and said nothing: libslvs
declares MAX_UNKNOWNS = 1024 and is handed every entity in the sketch at two params
per point, so the whole system came back TOO_MANY_UNKNOWNS and try_add_constraints
rolled the entire inferred batch back. From there no dimension could ever be applied.
Constraints only couple entities that share a point, so the solver now falls back —
only on TOO_MANY_UNKNOWNS — to solving connected components separately and committing
all-or-nothing. The auto-constraint pass batches its Horizontal/Vertical constraints
instead of one solve each, which is what kept the bulk path fast once solves started
succeeding: a 1204-entity load went 1585 ms -> 562 ms.
Plus the scale rungs (a thousand-entity plate drawn on by hand; the heaviest real
drawings graded and timed), the --step 1 fix that used to select nothing while
reporting a clean run, and scripts/ladder-all.sh as the one-command gate.
Parity 17 identical / 8 diverging as expected. Kernel suite here: 188 cases /
2532 assertions, including "a sketch past the solver's unknown limit still solves".
snaporca-yww4, snaporca-x6v7, snaporca-j6sr
Review request on PR #15238: "Place CAD-related files (e.g. CadDocument/
GeometryEngine) into a separate folder."
src/libslic3r/CAD/ the kernel — CadDocument, GeometryEngine, the four
Sketch* units, SketchSolver, ThreadStandards
src/slic3r/GUI/CAD/ the tab — DesignPanel, DesignCanvas, DesignSketchTool,
SketchInlineEditor, McpControl, generated DesignOffer
Pure relocation: no line of logic changes. Two include rewrites follow from it —
files that moved re-spell their own neighbours against src/ (already on the
include path), and files that did not move pick up the new folder. docs and
docs/ux/mockups/gen_offer_table.py follow the same paths.
Verified: libslic3r, libslic3r_gui and libslic3r_tests all build, CAD suite green
at 2518 assertions in 194 test cases, and the sibling fork builds identically —
17 shared sources still byte-identical, 8 diverging by their expected counts.
tests/libslic3r/CMakeLists.txt added only test_caddocument.cpp under
SLIC3R_CAD. The other five shipped in the tree and were never compiled, so
49 TEST_CASE blocks looked like coverage and were not: sketch constraints,
sketch editing, sketch import, inference, and the libslvs constraint set.
They also still targeted Catch2 v2 — mainline is on v3, where the umbrella
header is catch2/catch_all.hpp and Approx lives in the Catch namespace rather
than at global scope. Both fixed; nothing else in the files changed.
Found by building the tree rather than reading it. Suite goes from 374 to 423
test cases, 54,424 to 54,620 assertions, all passing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Tommaso Bianchi