When a print fails, DeviceErrorDialog now fetches the printer's captured camera
frame of the failure and shows it in place of the generic HMS illustration,
falling back to the local image and a drawn placeholder on older plugins or errors.
- Agent: add get_hms_snapshot through NetworkAgent / IPrinterAgent (BBL calls the
bound plugin symbol; other agents no-op, so old plugins degrade gracefully).
- DeviceManager: parse and clear m_print_error_img_id from the print-error message.
- Dialog: tiered cloud/local/placeholder image reusing the single image widget,
with a liveness-guarded async callback decoded on the UI thread.
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
Multi-nozzle sync widget, AMS rack-nozzle mapping popup, calibration rework, send-dialog nozzle mapping and extruder-count UI. Includes the fix to persist the AMS sync badge on filament cards (H2C/A2L and direct-sync printers).
Implements phase v3.0 of filament_id_plan_v3.md - tooling and client
prerequisites. No filament_id values change in this commit.
Tooling (scripts/assign_filament_ids.py; 106 unit tests):
- The mint key becomes "filament_product/<filament_vendor>/<filament_type>/
<family_name>", resolved loader-faithfully from the declarer's flattened
config - bundle-independent and content-addressed; identity fixes re-id
by design and are made safe by the succession ledger. --mint now takes
the triple.
- The snapshot gains "triples" and "triple_exceptions" sections, folded
into the equality gate: any vendor/type/name change surfaces as a
reviewable snapshot diff. Check 3 rewritten to triple-mint conformance
with (id, triple) grandfathering; check 5 generalized from OFL generics
to every OFL-riding vendor preset; new check 8 (triple integrity) and
check 9 (succession integrity).
- The retired ledger moves to resources/profiles/retired_filament_ids.json
so it ships with the app; schema {claims, successor} plus cross-island
"hints". The 14 v1 entries are migrated with mode-rule successors.
Vanished ids in a foreign island's space (GF*/QD_*) are RELEASED with a
hint instead of retired: the island catalog owns them and may
legitimately (re)ship them, which check 4 must never block.
- New maintenance modes: --remint VENDOR, --drop-redundant-ids VENDOR,
--add-hint "OLD=NEW", and --update-snapshot --forget-never-shipped FILE
(never-shipped ids drop from lineage; chains splice through them).
Runtime (C++):
- Succession helpers in libslic3r/Preset (pure chain-follow + lazy ledger
load from resources), consulted only on resolution miss in
get_filament_by_filament_id, both AMS sync predicates,
add_ams_filaments, setting_id_to_type, and the calibration-history
lookup; behavior is byte-identical while the ledger has no matching
entry. Catch2 coverage in tests/libslic3r.
- W1 hardening: check_ams_filament_valid no longer remote-wipes trays or
rewrites temps for P-shaped ids that a system preset carries (ten such
system ids ship today); the size==8 && [0]=='P' assert is relaxed; the
unguarded filament_list find deref in the temp-equation check returns
non-destructively on a miss.
- MoonrakerPrinterAgent: the 23 hardcoded OFL generic ids are replaced by
a runtime lookup of "Generic <family> @System" (id-equivalent on
today's shipped profiles, follows future re-mints automatically);
scripts/test_moonraker_lane_data.py derives its expectations from the
shipped profiles and gains --check-ofl-map.
Profile data (W3 - type is now a key component, so type bugs are fixed
before any re-mint):
- 17 same-name-different-type groups corrected across 50 files (OFL
Generic PETG-CF/PE-CF/PP-CF; Flashforge ASA Basic/ASA-CF/ABS-CF/HIPS/
PAHT-CF/PLA Silk; FusRock PAHT; Creality Generic PA6-CF; InfiMech PETG;
Anycubic TPU 95A / TPU for ACE; Prusa Generic PA-CF/PLA-CF) - every
value validated against MaterialType::all(); 3 Snapmaker U1 roots gain
their missing filament_vendor. Flattened-config equivalence vs the
previous commit: exactly the 54 intended diffs, zero BBL.
- doc/developer-reference/filament_id.md rewritten for the v3 rule.
Ambiguous type divergences (Prusa Generic TPU/TPU HF FLEX-vs-TPU, FusRock
S-Multi/S-PAHT) and all same-type vendor-tag divergences are deferred to
the v3.2 vendor worksheets, catalogued with analysis.
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
SoftFever