* Sync Elegoo profiles from ElegooSlicer
Update vendor Elegoo.json, filament/machine/process trees, and OrcaFilamentLibrary
Elegoo entries. Align machine default material names with existing filament preset names.
* feat: expose filament_name for G-code export filename format
Derive from filament_settings_id for the first active extruder and strip the suffix after @, matching ElegooSlicer so filename_format can use {filament_name}.
* chore: reorder Elegoo entries in OrcaFilamentLibrary
Group Elegoo @base profiles and bump library version to 02.03.02.62.
* sync OrcaFilamentLibrary.json with Elegoo filament profiles
* fix: clean up Elegoo process renamed_from for profile validation
Add single renamed_from only where preset names changed from legacy Orca
names; remove duplicate Rapid @System library entries that conflicted with
ECC2 vendor presets.
* fix(profiles): add missing Elegoo renamed_from for profile validation
CI custom-preset tests still inherit legacy Orca preset names that no
longer exist after the Elegoo bundle update. Add renamed_from on process,
Neptune 4 machines, OrcaFilamentLibrary filaments, and Giga profiles so
inherits resolve again, without changing print parameters.
Update Snapmaker U1 (0.4 nozzle).json
Updated Snapmaker U1 0.4 nozzle "change_filament_gcode" and "machine_end_gcode" to fix the issue of collisions when using "Print by Object"
Fix compile error in Debug mode. Adds getters for Point3 types in ExtrusionEntity
ZAA changed ExtrusionPath::polyline from Polyline to Polyline3, preserving the existing interfaces by converting first_point and last_point to return a Point copy constructed from the underlying Point3 type.
ExtrusionLoop::validate function was not updated and is broken in debug configurations as it's currently comparing Point to Point3
This change promotes ExtrusionPath::first_point3/last_point3 to the ExtrusionEntity base class as a pure virtual function, implements them on derived classes, and fixes ExtrusionLoop::validate
Fix nozzle diameter guards for printers that don't report nozzle info (#13236)
PR #12814 changed DevNozzle::m_diameter default from 0.4f to 0.0f to
mean "unknown" when firmware doesn't push nozzle info, and guarded two
call sites in SelectMachine.cpp. PR #13330 introduced
DevExtderSystem::NozzleDiameterMatchesOrUnknown() and adopted it in
get_printer_preset / CalibUtils / CalibrationWizardPresetPage. A few
reachable sites were still left out and now report "mismatch" / fail
silently for every non-BBL printer (Klipper/Moonraker, RRF, Marlin,
etc.) that doesn't push BBL nozzle data.
The most visible symptom: the "Sync filament colors from AMS" button on
Moonraker printers with AMS/AFC silently does nothing, because
get_printer_preset() couldn't find a matching system preset (fixed in
#13330, but the lookup-string sites below kept the bug visible
elsewhere).
Apply NozzleDiameterMatchesOrUnknown at the two remaining comparison
sites:
src/slic3r/GUI/Plater.cpp
- file-load printer-mismatch dialog — don't prompt on every load
- on_select_preset sync_extruder_list gate — skip 0.0 extruders
For the three filament-lookup string-builder sites, fall back to the
currently-selected printer preset's nozzle diameter so the dropdown
isn't empty when firmware hasn't reported a diameter:
src/slic3r/GUI/AMSMaterialsSetting.cpp (Popup + on_select_filament)
src/slic3r/GUI/CaliHistoryDialog.cpp (get_all_filaments)
Also remove the dead SyncAmsInfoDialog::is_same_nozzle_diameters method
surfaced while auditing the affected sites — it was introduced
2024-12-30 in commit ad79ed6d93 ("ENH:add SyncAmsInfoDialog",
cherry-picked from Bambu's internal branch) but a caller was never
wired up on the OrcaSlicer side. Dead since introduction.
Fixes#13236
Refs #12814#13330
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fix data race in extra bridge layer generation causing spurious bridges on top surfaces
* Guard second bridge layer against top most surfaces
* CoPilot review comments & lighting infill threading fix.
* Fix overhang preview not using fallbacks when angle is 0
The overhang visualization in Preview ("show overhangs based on support settings")
used the raw `support_threshold_angle` value from the configuration.
When `support_threshold_angle` was set to 0, Orca internally falls back to:
- 30° for tree supports
- an angle derived from `support_threshold_overlap` for normal supports
However, the preview logic ignored these fallbacks and used the raw value (0°),
leading to incorrect overhang highlighting that did not match the actual
support generation behavior.
This patch computes the effective overhang threshold used for preview:
• If `support_threshold_angle > 0`, use it directly
• If `support_threshold_angle == 0` and tree supports are used, fall back to 30°
• If `support_threshold_angle == 0` and normal supports are used, derive the
equivalent angle from `support_threshold_overlap`, `layer_height`, and the
external perimeter width.
The function now returns `normal_z` directly so the preview uses the same
effective slope threshold as the support generator.
As a result, the overhang highlight in Preview now correctly matches the
supports that will actually be generated.
* Apply Copilot suggestions
Address SoftFever review item 1 on #13752: CFS sync now lives in
CrealityPrintAgent::fetch_filament_info, matching the MoonrakerPrinterAgent
/ QidiPrinterAgent / SnapmakerPrinterAgent shape. The standard
Sidebar::sync_ams_list
-> DeviceManager::get_selected_machine()
-> Sidebar::load_ams_list(obj)
-> Sidebar::build_filament_ams_list(obj)
-> agent->fetch_filament_info(dev_id)
-> build_ams_payload(box_count, max_lane_index, trays)
path now applies to CrealityPrint hosts identically to the other
Klipper-flavoured agents. CrealityPrintAgent inherits
MoonrakerPrinterAgent, so the inherited connect_printer() ->
announce_printhost_device() -> SSDP callback already triggers
MachineObject creation in DeviceManager's localMachineList for
K-series LAN hosts; the Plater-side special case was simply bypassing
get_selected_machine() before it could fire.
Removed:
* The if (host_type == htCrealityPrint) block in
Sidebar::sync_ams_list (and the CrealityPrintAgent.hpp include it
required).
* The static CrealityPrintAgent::sync_filaments_into_ams_list()
helper that wrote directly to PresetBundle::filament_ams_list,
plus the CFSAmsListResult status struct that surfaced dialog text
back to the Sidebar.
CrealityPrintAgent::fetch_filament_info itself is unchanged - it was
already calling the inherited build_ams_payload() correctly.
Net diff: 227 deletions / 4 insertions across 3 files. No behaviour
change. Discovery + WS protocol parsing unchanged.
PR #13388 added resources/printers/N6.json for X2D support but did not
bump resources/printers/version.txt. PresetUpdater only copies files
from the install's resources/printers/ to the user's data_dir/printers/
when the resources version is newer than the user's stored version, so
every existing install stays at 02.00.00.29 and never receives N6.json.
At runtime, json_diff::load_compatible_settings("N6", "") reads from
data_dir/printers/N6.json; the silent file-missing failure leaves
is_support_bed_leveling, is_support_pa_calibration, and
SupportCalibrationNozzleOffset at their defaults, hiding the Bed
Leveling and Nozzle Offset Calibration checkboxes in the Send Print
Job dialog for the X2D.
Bumping the patch version triggers the existing propagation logic on
next startup.
Fixes#13780Fixes#13794
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Ignore SIGPIPE at startup to prevent crash on dropped printer connection
Writing to a closed printer network socket raised SIGPIPE, whose default
action terminated the whole process (exit 141, no crash report). Set
SIGPIPE to SIG_IGN once at main() entry (POSIX only) so such writes return
EPIPE to the existing networking error handling instead of killing the app.
Fixes#13787
- Added missing translations for various UI elements and messages.
- Improved existing translations for clarity and accuracy.
- Ensured consistency in terminology across the localization file.
The fdm_filament_petg base template added in 7f46c652 (cherry-picked
from hamham999's PR 13581) had two bugs:
- filament_type: ["PLA"] (should be PETG)
- inherits: null (should chain to fdm_filament_common)
so OrcaSlicer still rejected our CR-PETG profiles even after the
base was installed.
The existing fdm_filament_pet base already declares filament_type:
["PETG"] and inherits fdm_filament_common, so it correctly serves as
the PETG base. Repoint all 10 K2-family CR-PETG profiles at it and
remove the buggy fdm_filament_petg.json + its Creality.json entry.
This effectively reverts the resource addition from 7f46c652 while
keeping the CR-PETG filament profile additions from 5612e120 (now
with a working inherits chain).
Verified locally: OrcaSlicer parses all 10 profiles without error and
the K2 family populates the Add Printer dialog.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
