138 commits. The count is large because texture displacement merged with its
whole branch history behind it, going back to July, alongside config and preset
file locking across instances, a foundation for configurable printer agent
connections, and a day of smaller fixes and CI work.
Two conflicts, both the same shape: each side had appended to a sorted list and
git could not choose an order. libslic3r's CMakeLists gained InstanceLock
alongside our IMEXHelpers and IMEXZones, and the preset bundle loading test
gained an include for ParallelResolve alongside ours for IMEXHelpers. Both sides
kept, alphabetical. No logic conflicted.
Verified: 740 targets build clean under -Werror, and the Release suite passes
1740 of 1740, up from 1665 -- the 75 new cases arrived with the merge and all
pass. That mattered more than usual here, since preset loading and config
locking are both areas the IMEX preset code touches.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Lock Config and Preset Files Across Instances and Write Them Atomically
Every running instance shares one OrcaSlicer.conf and one user preset
tree, and nothing kept their writers apart. Two instances saving at the
same moment, or the cloud preset sync thread writing while the GUI thread
saved, could interleave, and a reader in another instance could open a
preset JSON or .info file between truncate and close and get a partial
file, dropping that preset for the session with a parse error.
Add InstanceLock, a scoped guard that serialises the threads of one
process through a recursive mutex and other processes through an advisory
OS file lock: flock on POSIX, held on the guard's own descriptor so no
other close in the process can drop it, and LockFileEx on Windows. The
outermost guard opens the lock file and closes it on release, so nothing
stays open between saves and a data dir can be removed once nothing is
saving into it; the file itself is kept, since deleting it would let a
third instance lock a fresh file while the second still holds the old
one. It is best effort: when the lock file cannot be opened or locked, or
another instance still holds it after a second, the guard logs once and
lets the write proceed, then leaves the file alone for ten seconds, so a
hung instance never blocks every other one and a holder stuck in a
debugger does not cost a stall per save. The guard sits at the leaf
readers and writers: set_sync_info_and_save() calls save_info() under the
preset collection mutex, so a batch lock around save_user_presets() would
invert the order against the sync thread. The user preset scan reads its
files on worker threads without the guard, since the mutex would
serialise them, and takes it per file in the serial commit step, so a
save never waits for the whole scan. Each read keeps the bytes of the
preset and its .info as they were before parsing; commit compares them
with the disk under the guard and reads a file that changed again, so it
never deletes or writes back over another instance's newer save, nor
installs a .json and .info from two different saves; a preset another
instance removed in the meantime is not installed. Without the guard, in
a cool-down, the scan still loads the presets but leaves their files
alone: an unreadable file stays for the next scan, and a derived
compatible printer is not written back. Read-only scans, which is what
the CLI does, take no lock and create no lock file.
AppConfig holds OrcaSlicer.conf.lock in load() and save(); load is
included because the Windows path restores from the .bak copy. Every
user preset writer and reader holds user.lock: Preset::save(), which
writes no .info when the preset itself could not be written, since an
.info without its preset reads as a cloud deletion request, save_info(),
reload() and remove_files(), each preset the scan commits, the
bundle metadata reads and write, the .info removal after a cloud-confirmed
delete, the orphaned-.info scan on the sync thread, the bundle folder
removal on unsubscribe and the physical printer writers and delete
paths. A bundle import extracts under cache/ into a folder per process
and per import, where no scan reads.
Preset JSON, .info, bundle metadata, physical printer and config files,
and the caches and state files that already used a temporary by hand,
now go through write_file_atomically(), which writes <file>.<pid>.<n>.tmp
beside the target and renames it over, so a reader that never waits sees
a complete old or new file. A symlink is followed; a target that is not
a regular file is written in place; and when no temporary can be created
beside an existing target, or the rename itself is refused, by a Windows
reader holding the file open or a mount that cannot replace in one step,
the helper writes in place as before, since losing the save is worse
than a torn read. On POSIX the rename replaces the
target atomically where the old code removed it first and left a window
with no file at all; only a mount that refuses a one-step replace gets
the old remove-then-rename. A crash between temporary and rename leaves
the temporary behind, which no scan reads. Preset::save() returns
whether it wrote the preset, so the scan counts a compatible printer it
could not write back as an error. A failed config write keeps
the config dirty, and the idle handler waits ten seconds before retrying
while an explicit save always tries.
* Run the Cross-Process Lock Test on Every Platform
The test that checks the guard yields to a lock held elsewhere forked a
child to hold it, so it was left out on Windows. The OS lock belongs to
the handle on Windows and to the open file description elsewhere, so a
second handle in the same process is refused like another instance
would be. The test now holds the lock that way and runs everywhere.
With stealth mode off the home page asks for the login status every 2 s,
and while nobody is logged in that ends in clear_user_secret(), which
opened the system keychain and deleted the OrcaSlicer/Auth entry on the
UI thread every tick. A working keychain cost a D-Bus round trip per tick;
a keychain that never answers blocked the UI for 25 s per tick. It also
deleted a login another running instance had just saved, and ignored
use_encrypted_token_file, so opting out of the keychain did not help.
Remember whether this process read a secret from the store or wrote one,
and only then touch the store when a logged-out poll asks for a logout.
A logged-out instance never touches the keychain, and in encrypted-file
mode the poll no longer opens the keychain at all. A secret this process
cannot read, such as a token file encrypted for another OS user sharing
the data directory, is left alone by the poll. An explicit logout still
wipes both backends, so a token stranded by switching the token storage
option cannot sign the account back in later.
Eleven commits, including a typed-config G-code export speedup, a printer agent
refactor that generalizes the infrastructure beyond Bambu, gyroid optimization,
and three CLI crash fixes.
One conflict, in PrintConfig.cpp. Upstream introduced a new_def macro and began
migrating the placeholder table onto it, adding curr_bed_type that way in the
same block where this branch had added imex_mode, imex_mode_index and
imex_mode_gcode in the older def = this->add(...) form. Both sides are kept and
ours are converted to the macro, which expands to the same three statements and
wraps label and tooltip in L() exactly as before, so nothing changes about what
is registered or what is translatable.
Note for anyone building this branch: the agent refactor adds a dependency,
LibDataChannel, so the deps tree needs dep_DataChannel built before the app will
configure. A distribution package of the same name will be found first if one is
installed, and the resulting error names a missing RelWithDebInfo location
rather than the wrong package, so point LibDataChannel_DIR at the dependency
prefix if that happens.
Verified: 789 targets build clean under -Werror, and the Release suite passes
1665 of 1665, up from 1630 before the merge -- the 35 new cases arrived with it
and all pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The lane map fetched over Moonraker was applied to whichever printer preset
happened to be edited when the response arrived, with no check that it was the
machine polled. Not a race, as the whole chain runs on the GUI thread with the UI
blocked, but a steady-state mismatch: two IMEX printers of different models with
the same logical extruder count both pass every existing guard, and the map is
written to the wrong preset and dirties it with no user action.
The pairing is now evaluated when the callback runs, against the selected device,
on the predicate update_sync_status() uses. Capturing an identity at connect time
would instead ask whether the edited preset had changed since then, and would
reject the user who selects a machine and only then switches to its matching
preset.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add developer flag for printer agents
* Parse user print info on the UI thread to prevent heap corruption (#119)
get_user_print_info()'s HTTP fetch can run on a worker thread (e.g. BindJob),
but parse_user_print_info() mutates userMachineList (insert/erase/delete
MachineObject). on_machine_alive (SSDP) mutates the same maps on the UI thread
without locking, so parsing off-thread races the map and frees MachineObjects
out from under it -> heap corruption.
Keep all device-list mutation on the UI thread: parse inline when already on
the main thread, otherwise marshal via CallAfter so it stays serialized with
on_machine_alive.
* Prevent loss of user access code on LAN reselect
Keep user access code intact to maintain access rights even if
device slot is unpopulated, ensuring continuous connection
and status message reception.
* Harden send flow and separate upload failure recovery (#111)
* fix(send): harden FT send path + IP pre-flight UX
* Remove early returns
* Working Moonraker and Qidi printer agent transport (#104)
Folds the Qidi AMS box-mapping print
overrides (apply_box_mapping +
start_* wrappers) that the transport
fix builds on.
* Add support for runtime error status in plugins
Distinguish a loaded plugin whose
capability errored (RuntimeError,
warn-styled, stays checked) from a
load-time Error. Status now derives
via resolve_plugin_status(); enum
ordinal keeps dialog sort priority.
Unloading clears stale errors.
* Resolve duplicate agent ID conflicts
Reject a printer-agent capability
whose agent ID is already owned by
another capability or built-in:
flag the plugin error, disable the
capability, and warn the user
instead of silently ignoring it.
* fix: checkbox should depend on plugin is_loaded status
* Replace fake-enum printer agent dropdown (#121)
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
* Reset device selection on agent swap or unload (#124)
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
* Gate agent mode behind use_printer_agents toggle
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
* Track BBLPrinterAgentPlugin.py
* Add printer-agent and plugin status tests
Ports the agent lifecycle, duplicate
agent-id, built-in-id clash and
status-resolution tests. The loader
runs on a detached worker thread, so
the lifecycle tests live in their own
executable. Tests install the
production unload-side registry
wiring themselves (no GUI in the
test binary) and register agents
manually so concurrent loads stay
deterministic.
* fix: pin HTTP to prevent connection refusal
Set `use_ssl` to false to ensure Moonraker
connectivity, as the service uses HTTP rather
than HTTPS, preventing connection issues. Initialize
device info early for reliable name resolution.
* Bring Moonraker device panel to feature parity
The monitor panel showed wrong or missing
data for Moonraker printers, and its
controls did nothing.
Push payload now carries layer number and
total layers. Remaining time replaces the
wrong total_duration - print_duration
formula. The chamber light toggle maps to
Klipper SET_PIN / SET_LED, and pause,
resume and stop post to
/printer/print/{action}. Task thumbnails
resolve via /server/files/thumbnails onto
a new MachineObject thumbnail url.
Filament sync switches to pull mode so the
agent is queried on demand.
Not compiled or run.
* Stop blocking print on unreported nozzle data
* fix: make Klipper macro lamp control reliable
* Surface Moonraker webcams and gate unrunnable controls
* Keep Bambu AMS dialect out of the agent waist
M620 is Bambu firmware dialect, not a
neutral command. Composing it in
MachineObject let non-Bambu agents
(Moonraker/Klipper) forward it and
report success on firmware that
cannot run it.
Agents now own the dialect: the
default refusal on IPrinterAgent
returns not-supported so the UI
can say so; BBLPrinterAgent keeps
the byte-identical composition.
* Fix multi-color filament logic
Reuse color decoding across functions to improve
code readability and maintain consistency in
multi-color filament handling.
* Move Moonraker commands off the UI thread
Pause/resume/stop, g-code sends, temps, and
light ran synchronous HTTP on the UI thread,
freezing the app up to 10s per click on slow
or unreachable printers.
Run them on a single agent-owned FIFO worker
so g-code ordering is preserved, while command
translation stays synchronous so unsupported-
command dialogs still work.
Add a pending-disabled state to the pause,
resume, and abort buttons for Moonraker-family
printers: the icon only flips once the
WebSocket reports the real state, which also
rules out double-click races.
* Show Snapmaker U1 camera in Device tab
The U1 exposes no /server/webcams/list entry;
its camera only captures after an explicit
camera.start_monitor RPC, which the Moonraker
websocket executes unauthenticated but only
answers over MQTT - so the call is fire and
forget.
Start the camera when the camera view is
shown and renew every 300 s: the printer
retires the capture task at ~362 s and
stop_monitor is accepted but ineffective,
so teardown is simply to stop renewing.
Frames land in monitor.jpg as still JPEGs
(~2 fps at interval 0), so the webview loads
a local HTML wrapper that repolls with a
cache buster.
* fix: start stream when camera URL changes
* fix: stop Qidi slot parse throwing on null
* Keep printer-agent progress in sync
Keep the shared task progress aligned with agent
reports that lack Bambu cloud task identity.
Release the lazily allocated task during reset to
avoid leaks when machine objects reconnect.
* docs: document the printer-agent subsystem
* fix: merge access codes into one
* Reconcile implementation split with PR tip
* feat: abstract remaining gcode commands in devicemanager
* refactor: abstract bambu specific protocol to printer agent
* refactor: push bbl workflows to bbl printer agent
* remove unused
* fix: default impl
* fix callback error
* fix: remove redundant cache
* specify api for getting file transfer url
* revert file transfer abstraction
* fix: ams filament mapping workflow
* feat: update qidi to use subscription based filament sync mode
* fix: resolve stubgen byte header conflict
* fix: ams sync info and periodic ams sync via subscription workflow
* fix: skip filament sync dialog if filamentSyncMode is none
* feat: parse nozzle information for qidi and moonraker printer agents
* fix: extend access code requirements t 0, 8 or more characters.
* remove irrelevant docs
* fix: remove heavy includes from IPrinterAgent
* fix: defer filesystem and camera abstractions
* fix: remote do_fetch_filament_info from tests
* cleanup moonraker and snapmaker printer agents
* fix: access codes regression
* fix: tests
* fix: printer agent switching on preset change
* fix: remove unused variable
* fix: snapmaker U1 SelectMachineDialog blocking print
* fix: merge artifact
* fix: clear up some unrelated changes
* feat: connect to cloud printer and monitor
* feat: connect to cloud printer and monitor
* feat: generic camera stream support for http snapshot and rtsp
* fix: build & access code UI
* feat: generic camera stream support for http snapshot and rtsp
* fix: build & access code UI
* feat: connect to cloud printer and monitor
* feat: connect to cloud printer and monitor
* fix: build errors
* feat: camera via webrtc
* fix: build
* fix: cmake
* feat: remove frame assembler and change config to set protocol
* fix: orcaprinteragent refactor
* fix: LAN paths and camera stream
* feat: use ffmpeg to render http camera stream
* fix: make model_id/dev_type optional instead of blocking
* fix: connect via ip dialog
* feat: LAN impl for Orca Printer Agent
* fix: model_id resolution method for non bambu printers
* fix: ffmpeg http camera stream jittering due to incomplete frames
* fix: revert sdcard check
* feat: check printer storage status before sending
* fix: moonraker printer agent hang on printer power cut
* fix: shim layer for any compatibiliity changes
* fix: cloud printers were using the wrong MQTT endpoint
* feat: cloud download via HTTP
* temp: doc for intended change
* fix: warnings
* fix: warnings
* fix: camera auto-play on startup
* fix: split infra from impl
* fix: uninitialized ams state blocking print
* Fixes nullptr deref
* Log first before std::move
* fix: printer agent virutal optional functions
* fix: parameterize orcaslicer_copy_test_dlls() for printer_agent_plugin_tests
* Revert "fix: parameterize orcaslicer_copy_test_dlls() for printer_agent_plugin_tests"
This reverts commit 2f566e3779.
* Guard libdatachannel. Remove unused code
* fix: unit tests & unused variables
* fix(ci): deps build order for datachannel
* Resolve printer agent first before getting cloud printer agent
* fix(ci): set depends openssl
* fix: re-include apply header guarded by ifdef __APPLE__
* fix(ci): add libdatachannel to flatpak manifest
* fix: add internal_developer_mode chekc back to MediaPlayCtrl::load()
* fix: invoke js clearInterval on WebMediaController::stop
* fix: change rtc log level
* fix: inject provider, agent id and generation to get_user_print_info to ensure correct metadata
* fix: revert moonraker specific behavior
* fix: remove stale comment
* fix: use ORCA_CLOUD_PROVIDER instead of hardcoded string
* fix: remove hardcoded ICE servers
* feat: enable https camera stream mode
* fix: move non-mandatory printer agent function stubs to IPrinterAgent
* fix: dedupe compatible printer type check
* fix: stop the correct media controller
* fix: scope get_my_machine_list to printers listed under the current printer agent
* fix: move printer agent plugin tests into test_plugin_lifecycle.cpp
* fix: always build bundled DataChannel dep
* fix: disable unused DataChannel media support
* revert: filament sync work
* fix: wrap command_* with small wrapper
* fix: regression bug, connecting to bambu needs bblp username
* fix: default impl for vendor agnostic gcode commansd
* refactor: media controller playback routing and ownership
* fix: bump libdatachannel ver & update flatpak to use tar instead
* fix: stop flatpak DataChannel build from re-cloning over the sandboxed network
* fix: update windows ffmpeg prebuild
* fix: update printer agent plugin API
* fix: shift camera signaling channel to network agent
* fix: follow external-packages for flatpak libdatachannel deps & add flatpak path to use source_dir
* feat: add printer-agent.md doc to HLSD
* fix: guard DeviceManager command dispatch when no printer agent is bound
* fix: port BBL implementations from #15711
* refactor: connect_printer api and dialog
* fix(tests): make omitted printer agent operations answer like a missing agent
* fix: preserve printer agent defaults in PrinterAgentPluginCapabilityTrampoline
* test: cover printer agent default command dispatch
* fix: validate windows FFmpeg avformat library
* feat: extend optional printer model warnings to calibration & ams workflows
* fix: handle malformed printer progress values safely
* fix: clear webview document on stop
* chore: reduce diagnostic logging level to trace
* refactor: centralize printer compatibility checks
* tests: add device manager integration coverage
* tests: cover WebMediaController lifecycle with wxWebView stub
* fix: make integration tests headless
* refactor: collapse command_ams_refresh_rfid and command_ams_refresh_rfid2
* refactor: make printer connection SSL agent-specific
* fix: persist input printer host and port
* fix: use correct device id for Moonraker connections
* fix: make moonraker gcode commands asynchronous
* fix: preserve moonraker device names
* fix: add include for non BBL_RELEASE_TO_PUBLIC path in BBLPrinterAgent
---------
Co-authored-by: Andrew <159703254+andrewsoonqn@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Lam Wei Lun <weilun.lam@gmail.com>
Upstream moved pressure advance onto the extruder variant: enable_pressure_advance,
pressure_advance and the four adaptive keys joined filament_options_with_variant,
the repeated inline blocks in set_extruder() became a helper, and the lookups
moved from the filament id to get_filament_config_index().
All three conflicts were the same collision, because this branch had modified two
of those same inline blocks to pass a tool qualifier so each carriage is addressed
explicitly in parallel modes. Taking either side whole would have lost something:
upstream's drops the qualifier and leaves parallel carriages with no pressure
advance, ours drops the per-variant indexing and reads the wrong column on a
multi-variant printer. The helper now takes an optional tool, defaulting to -1,
which omits the qualifier. imex_pem_tool_for() already returns -1 off IMEX and in
primary mode, so non-IMEX output is unchanged, and the three call sites that never
passed a tool keep upstream's behavior exactly.
The third conflict was two test cases appended at the same place. Both are kept.
Separately, one defect that merged cleanly and so was not flagged: the loop that
emits pressure advance for secondary carriages at the start of a print still
bounded and indexed those vectors with a raw filament id. They are variant
expanded now, so their length is columns rather than filament slots -- the value
read was the wrong column, and the bound no longer sat in slot space, letting an
out-of-slot filament through. It now bounds on filament_diameter and translates
with get_filament_config_index(), which is what the sibling second-layer
temperature loop already does.
Verified: both changed translation units compile clean under -Werror. The merge
was resolved independently twice and the two resolutions agree on every line of
code. Not yet run: the Release test suite and a parallel-mode slice sweep.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop Malformed Network Responses from Crashing the App
Duet, MKS and UltiMaker parsed print host replies with boost read_json
inside the HTTP completion callback with no try, so an HTML or truncated
reply threw out of the Physical Printer Test button and terminated the app,
or killed the upload queue thread. The five identical copies of the parser
(ESP3D's and Flashforge's were unused) are replaced by one shared
PrintHost::get_err_code_from_body that reports a non-JSON reply as an error.
The upload queue now catches a failing job per job, so one bad upload no
longer leaves later jobs queued forever.
Flashforge read material station slots with nlohmann value(), which throws
on off-type fields or non-object entries. The parsing moves into
Flashforge::parse_material_slots, which reads fields leniently with the
existing try_parse_json_int and skips bad entries.
UserManager::parse_json parsed the payload before its try block; the parse
now happens inside it.
* Keep UploadFinished Paired with UploadStarted When an Upload Throws
The exception from a throwing upload was caught around perform_job, so
the UploadFinished lifecycle event was skipped and plugins saw an
upload start that never finished.
The catch now sits around the upload call. The error is reported
through the job's error callback and UploadFinished is fired with an
error code, as for any other failed upload. The worker keeps running
for the next job. The started, upload and finished sequence moved to
PrintHostJobQueue::upload_job so it can be tested without the dialog.
* Confine Updater Archive Extraction to the Target Directory
The preset updater extracted downloaded archives by appending each entry
name to the cache directory, and the network plugin installer did the same
for the plugin folder, without checking that the result stays inside it.
Move the updater's extraction into libslic3r as extract_archive_confined,
which validates every entry with is_path_within_root before writing
anything and fails the whole archive if one entry resolves outside the
target. The plugin installer now rejects such an entry the same way. Well
formed archives extract exactly as before.
* Harden Archive Extraction Against Symlinks
The plugin installer now creates a symlink entry only when its target is
relative and, joined to the link's own directory, passes
is_path_within_root, via the new is_symlink_target_within_root helper.
Before writing any entry it checks the destination with symlink_status, so
an existing symlink, dangling or not, is replaced rather than followed, and
it creates parent directories inside the existing error handling.
extract_archive_confined replaces a symlink at a destination file the same
way.
is_path_within_root now ignores a trailing separator on the root, which
previously made every path fail the check.
* Validate Plugin Symlink Targets Before Replacing Existing Files
A symlink entry's target is now read and checked before anything already
at its destination is removed or renamed aside, so an archive rejected
for its link target leaves the installed plugin files in place.
* Reject Paths with an Embedded NUL When Confining Extraction
is_path_within_root compared each component with "..", so a name such
as "..\0" passed the check. The filesystem calls stop at the NUL and
act on a shorter path than the one that was checked: a symlink target
read from a plugin archive as raw bytes was created as "..", pointing
out of the plugin directory.
A path containing a NUL is now rejected before anything touches the
filesystem, which covers every caller, including entry names taken from
the Unicode Path extra field.
* Percent-Encode Local File URLs for Embedded Web Pages
The Home tab, setup wizard, Project tab and other embedded pages were
loaded from file:// URLs built by pasting the resources path into a
string. A '#', '%' or '?' in the install path was then read as a URL
fragment, escape or query, so the pages failed to load, for example a
portable install under D:\#OneDrive showed a directory listing instead
of the setup wizard.
Add file_url_from_path(), built on wxFileSystem::FileNameToURL, and use
it wherever a local page or image URL is built from a path. Queries such
as ?lang= are appended after the path is encoded. The wizard's printer
cover images are passed to the page as file URLs too.
* Encode the Login Error Page URL and Cover More Windows Path Forms
The login dialog's error page was still loaded from a raw resources path;
it now uses file_url_from_path like the other local pages.
The Windows file URL tests now also cover a resources path joined with a
forward-slash relative path, as the callers build them, and a UNC path.
* Build the Flush Dialog Page URLs with the Shared Helper
WipingDialog and NozzleListTable still called
wxFileSystem::FileNameToURL directly. They now go through
file_url_from_path like every other local page, so the URLs are built
in one place.
Adds a test for a resources directory with a '#' in its name, which the
plugin page check did not recognise before.
The two conflicts are both places where upstream landed on top of IDEX/IQEX
code. In GCode.cpp the relocated file header block meets the IMEX placeholder
block, and the placeholders are set first: file_start_gcode is processed through
the placeholder parser now, which throws on a name it does not know, so a script
naming {imex_mode} would abort the export if the header ran first. In
test_multifilament.cpp both sides appended a case at the end of the file.
# Description
This brings back the Bambu Lab profile sync with BambuStudio, reverted
from main, along with its bed-model offset fix. The synced printers and
filaments share their start and end G-code and dual-nozzle settings
through template files that Orca did not read, so those printers had no
machine G-code. Orca now loads these templates the same way BambuStudio
does, so every synced preset comes in complete. `profile_include_dump`,
a new developer tool, compares the result with BambuStudio's.
Other vendors' profiles are unaffected. Bambu Lab profiles move to
version 02.08.00.10, so installs that took the earlier sync update too.
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
Unit tests cover how template settings combine with inherited and preset
settings, loaded from JSON and from the preset cache. The profile
validator passes on every shipped vendor, and every Bambu Lab preset
gets the same template values in Orca as in BambuStudio.
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* preset updater: refresh installed vendors from resources regardless of enable_ota
Since c4fea8ad24 the resources check in check_installed_vendor_profiles()
sat behind enabled_config_update, which now follows enable_ota, a hidden
flag that defaults to off. The hotfix a93c6ea67b then made that gate skip
installed vendors entirely, so a new build's newer vendor profiles were
never installed over an existing vendor unless OTA had been turned on.
Before the gating the update URL always had a default, so the comparison
effectively always ran.
The resources shipped with a build are not an over-the-air update. Judge
installed vendors against them, and drop the ones no longer enabled,
regardless of the flag; enable_ota keeps gating the online sync.
* preset updater: stop reinstalling the filament library on every launch
check_installed_vendor_profiles() put OrcaFilamentLibrary on the install
list unconditionally, so every launch recopied the whole vendor from
resources and, in a build that ships the profile JSONs rather than a
preset cache, then re-parsed and re-cached it: about 0.3 s of a dev
build's startup, and a 3 MB copy in a release build, for a vendor that
had not changed.
The library was special-cased because it is never in the enabled-vendor
list. Treat it like the default bundle instead: always wanted, and
reinstalled only when the resources carry a newer version.
* Add Ultimaker S5 Profile - WIP
* Add Ultimaker physical printer base
* Ultimaker API WIP for base update.
* Fix undefined reference error.
* Add UMS5 profile, add placeholders for testAuth stuff.
* Fix non-const func definitions, make func names align with style guide.
* Localization stuff? IDK if this does anything or is required.
* Add cover image
* Auth code cleanup, add UI button for auth cred generation, implement various auth checks and tests.
* Fix auth stuff
* Clean up code
* Get upload code sort-of working, fix typo
* Update printer settings and start/end gcodes
* Add makeGriffinCompatible preprocessor script to prevent machine crash, update machine profile.
* Fix buildplate size, fix time missing bug, add S5 buildplate model
* Correct capitalization to UltiMaker
* Fix display bug, fix capitalization bug
* Implement credential generation button and logic
* Fix generate auth creds button, add todos, fix capitalization.
* Actually fix generate auth credentials.
* Fix generate auth creds message.
* Update UM S5 machine limits
* Revert accidental commit.
* Fix postprocessor, clean up code.
* Update presets for multi-extruder printing.
* Add Single Extruder and Fast profiles.
* Code cleanup
* Register and validate the UltiMaker S5 presets
* Show the Generate API Key button only for UltiMaker print hosts
The PR added it to the Physical Printer dialog for every host type, where pressing it runs an ordinary connection test and reports "API Key created". Gate it on the selected host type instead.
* Drop unused lambda captures in the UltiMaker host code
clang promotes -Wunused-lambda-capture to an error under the project's -Werror, so the file failed to build on macOS; the five callbacks do not touch this.
* Fix the Windows build of the UltiMaker print host
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Four files overlapped, and each resolution favours upstream where the two sides
had done the same work:
WipeTower's M104/M109 tool qualifier. Both sides bounds-checked the physical
extruder map lookup; upstream omits the T qualifier when the map cannot answer,
where this branch fell back to the logical index and so named a carriage that may
not be the one printing. Upstream's behaviour is what this branch documents
elsewhere, so its version is taken and the local helper is dropped.
get_extruders' mixed-slot switch. Upstream added the same concept to the CLI
overload as expand_mixed_slots, so the GUI overloads' parameter is renamed to
match rather than carrying two names for one idea.
GLCanvas3D's sequential-clearance branch gains upstream's
update_compacted_wipe_tower_clearance for the by-layer case.
The printer_agent re-sync in TabPrinter::reload_config was upstream's and their
preset-undo fix removed it, so it goes; the IMEX modes grid re-sync beside it
stays, since it spans three options and is not a Field.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* CLI: --inspect-paint — dump per-facet paint state as JSON
Reads the per-facet enforcer/blocker/extruder/fuzzy-skin state stored
on every ModelVolume (supported_facets / seam_facets /
mmu_segmentation_facets / fuzzy_skin_facets) and emits a structured
JSON summary to stdout. Machine-readable alternative to opening the
paint gizmos.
Per (object, volume, layer, state): facet count, surface area in
mm², and mesh-local bounding box. Empty layers collapse to
{"empty": true}. Summary at the top level rolls up totals.
One correctness detail worth calling out: FacetsAnnotation::
get_facets_strict returns an indexed_triangle_set whose `vertices`
array is the whole source mesh — only `indices` are filtered to the
painted triangles. A naive bounding_box(its) would report the whole
mesh's bbox even when only a few facets are painted. The helper
its_referenced_bbox() walks only the vertices actually indexed by
the painted triangles, so `bbox` correctly localizes the painted
region.
Rationale: every paint-driven workflow — GUI-painted .3mf verified
in CI, AI agents planning support enforcers, MMU color layout checks
— needs to know what's already painted on a model. Today that's a
GUI-only read. --inspect-paint closes that loop for scripted callers.
New file src/slic3r/Utils/PaintCLI.{hpp,cpp} (~215 lines). Depends
only on Model, TriangleMesh, TriangleSelector, FacetsAnnotation, and
nlohmann::json — all already in tree. No new dependencies, no
signature changes, no behavior change when the flag is absent.
Registered as an action (parallel to --info) so it satisfies the
"needs an action" check and bypasses the GUI fallback; control falls
through the normal post-action path to a clean exit 0.
Verification:
unpainted STL: every layer {"empty": true}, summary zero
GUI-painted .3mf: enforcer count / area / bbox match painter
clean JSON: parseable via jq
* CLI --inspect-paint: exit after printing, reject conflicting actions
- Finish like the end of CLI::run once the JSON is written, as the
tooltip says. The callback manager is Linux-only, so its use is
guarded.
- Reject actions that would otherwise be skipped without notice
(--slice, --export-3mf, ...) before loading. Load-time options such as
--uptodate are still accepted.
- Replace invalid UTF-8 in object names and paths instead of throwing.
- Report every input file as sources; inputs are merged into one model
before actions run.
* CLI --inspect-paint: reject a run without input
Without an input file or --load-assemble-list there is nothing to
inspect, and the run printed nothing and exited 0. Reject it up front
with CLI_INVALID_PARAMS, next to the other invalid-parameter checks.
* CLI: --ground-face-* / --lay-flat / --center-on-bed orientation primitives
Adds the CLI counterparts to the GUI's lay-flat / face-pick gizmos.
Scripted / CI / AI pipelines can now set orientation without rendering
a wxWidgets frame; today the only way is a GUI round-trip.
New CLI actions (all operate in the mesh-local frame so they compose
with prior --rotate-* / --orient flags):
--ground-largest-face 1 Auto-detect the largest planar-face
or --lay-flat 1 cluster (area-weighted), rotate so its
normal points -Z. Covers "this part has
one obvious flat side" cases.
--ground-face-normal NX,NY,NZ Pick the face whose mesh-local
normal best matches the given
vector; ground it. e.g.
`--ground-face-normal 1,0,0`
stands a part on its +X side.
--ground-face-point X,Y,Z Find the triangle containing the
given mesh-local point; ground its
face. Disambiguates when several
faces share a normal (largest
containing triangle wins).
--center-on-bed 1 Translate so the XY bounding-box
centroid lands at the bed center
(derived from printable_area).
New file `src/slic3r/Utils/MeshOrient.{hpp,cpp}`:
- collect_triangles_object / compute_face_clusters — quantize
per-triangle normals (0.001, ~0.06°) and area-weighted-average
within clusters. Same clustering logic used by lay-flat.
- apply_ground_rotation — same math as Selection::flattening_rotate
in the GUI (Selection.cpp:1432): world-space quaternion from the
transformed normal to -Z, applied as offset * new_rot * old_no_offset
on every instance of every object, then a per-instance Z-lift so the
grounded face lands at exactly 0 (avoids "No layers were detected"
from FP-error z≈-1e-9).
- ground_face_point uses a top-N cluster search + point-in-triangle
test in local space; largest-area triangle wins on ambiguity.
Rationale: without these, any CLI pipeline that needs a specific
face on the bed must either encode custom rotation math per part or
break out of the pipeline into the GUI. Both are bad for
reproducibility. The --ground-face-* triple + the largest-face
auto-mode cover essentially every orientation intent expressible
in a slicing wizard.
Scope:
- `src/slic3r/Utils/MeshOrient.{hpp,cpp}` — new, ~420 lines
- `src/slic3r/CMakeLists.txt` — 2-line registration
- `src/libslic3r/PrintConfig.cpp` — 5 new CLIMiscConfigDef entries
- `src/OrcaSlicer.cpp` — 58-line handler block + 1 include
No behaviour change when the flags are absent.
(cherry picked from commit c45a9795e1)
* CLI grounding: choose among the Lay on Face planes, per object
Addresses review:
- Move the geometry of GLGizmoFlatten::update_planes() into
libslic3r/LayOnFace and use it from the gizmo and the CLI, so the
--ground-* options pick convex-hull faces per object and instance,
with part transformations (--rotate-x/y) applied.
- Drop --center-on-bed, the --lay-flat alias and MeshOrient; make
--ground-largest-face a coBool.
- Parse --ground-face-normal and --ground-face-point strictly. A point
that only some objects contain grounds those and leaves the others.
- Fold in --inspect-mesh from #14603, reporting the same planes.
- Tests in tests/libslic3r/test_lay_on_face.cpp: bounding boxes before
and after, rotate then ground, two objects, and a ribbed part whose
parallel inner faces outsum its base.
* CLI --inspect-mesh, --ground-face-*: reject missing input and empty values
- Without an input file or --load-assemble-list, --inspect-mesh printed
nothing and exited 0. Reject it up front with CLI_INVALID_PARAMS.
- An explicit empty --ground-face-normal or --ground-face-point was
silently ignored. Only options given on the command line reach the
transforms loop, so an empty value now fails the strict parse like any
other malformed value.
* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
build: clear eleven single-site clang-cl warning categories
Each of these is the last site left in its category, and every one is the
compiler saying it cannot tell what the code meant. Nothing here changes
defined behavior.
- OrcaSlicer_app_msvc.cpp printed a DWORD with %d
- StackWalker.cpp ran delete[] through an LPVOID
- ToolOrdering.cpp used a bare ; as a deliberate skip loop's body
- WipeTower.cpp had finish_block_tcr = finish_block_tcr, so the branch that
reached it did nothing. Folding the condition into the enclosing if leaves
the other branch untouched
- GCodeProcessor.cpp had an else binding to the inner if while the outer if
carried no braces
- AmsMappingPopupUpdate.cpp wrote >= 1 || <= 3 where its own comment says &&
- CalibrationWizardPresetPage.cpp left max_decimal_length unset through a
pair of conditions that cover every value but not visibly so
- DevManager.cpp bound map elements to pair<K, V> rather than
pair<const K, V>, copying every one
- SyncAmsInfoDialog.cpp had extraneous parentheses around a comparison
- Http.cpp had if (speed > 0.01) speed = speed;. speed now starts at 0 as
well, because curl_easy_getinfo leaves the target untouched when it fails
and the value reaches Progress either way
- SnapmakerPrinterAgent.cpp truncated npos into an unsigned int, so the
!= npos guard was always true. A colour with no # still yields 0, because
the wrap produced 0 as well
Nine categories go to zero. -Wtautological-overlap-compare and
-Wsometimes-uninitialized reach zero when #15583 merges their second site.
Orca content-addresses every system filament, Bambu's included, but a printer,
its AMS and its vendor's cloud know only that vendor's own catalog ids. The
printer agent now translates between the two: outbound MQTT and FTP traffic, the
AMS mapping sent with a print job, and the ids written into a 3mf bound for the
printer all leave in the printer's own ids, while status messages, loaded
projects and SD-card prints arrive in Orca's. An id with no mapping passes
through unchanged, and an agent whose printers already speak Orca's ids
translates nothing at all.
Bambu's map is generated from BambuStudio's own shipped bundle; a missing or
unreadable file leaves every lookup an identity rather than taking the app down.
The profile check validates the map's shape, and profile CI now runs on the paths
that can change it. docs/HLSD/filament_id.md records the places the map
deliberately does not reach.
No IMEX code upstream, so nothing in this merge touches the feature. All 21 overlapping
files auto-resolved; verified every upstream addition is present in the merged tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
