The remove button drew imex_remove.svg, a redrawn delete.svg, and the help
button drew the mascot question icon. They now use delete and icon_qusetion,
the tip icon the send-print dialog uses, and imex_remove.svg is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Five commits: a section view for the 3D canvas, a faster G-code preview, user
preset values kept on extruder variants they don't list, debug build CMake
fixes, and a 30 minute timeout on macOS notarization.
Two conflicts, both in GLCanvas3D. The header's were neighboring
declarations, kept from both sides. In the transparent pass, the section view
removed the assemble view's painter block that followed our ghost render;
the ghost render stays where it was, at the end of that pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The plate's mode button showed one icon whatever the mode. It now shows the
mode the plate slices as, the one its ghosts follow. imex_mode_kind() reads it
from the heads beside the mode's primary: none is Normal, any Span head is
Custom (the multicolor modes), otherwise any Mirror head is Mirror, and heads
that all copy are Copy. One Mirror head is enough because an IQEX mirror mode
copies within the primary's gantry.
The icons are Felix14-v2's: the four kinds, each in light and dark with a hover
state, replacing the single mode icon. Two fixes to them: the light Normal
border used the dark theme's gray, and an opacity="undefined" attribute hid one
of its strokes in nanosvg. The knight outlines are drawn at 1.0 rather than
0.8, matching the other plate icons and keeping Copy and Mirror apart when
zoomed out.
Co-authored-by: Felix14_v2 <75726196+Felix14-v2@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
138 commits. The count is large because texture displacement merged with its
whole branch history behind it, going back to July, alongside config and preset
file locking across instances, a foundation for configurable printer agent
connections, and a day of smaller fixes and CI work.
Two conflicts, both the same shape: each side had appended to a sorted list and
git could not choose an order. libslic3r's CMakeLists gained InstanceLock
alongside our IMEXHelpers and IMEXZones, and the preset bundle loading test
gained an include for ParallelResolve alongside ours for IMEXHelpers. Both sides
kept, alphabetical. No logic conflicted.
Verified: 740 targets build clean under -Werror, and the Release suite passes
1740 of 1740, up from 1665 -- the 75 new cases arrived with the merge and all
pass. That mattered more than usual here, since preset loading and config
locking are both areas the IMEX preset code touches.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Addresses the interface notes on the IDEX/IQEX modes editor.
Add Mode moves from below the rows to the top of the panel, beside a "?" button
that now carries the overview text as its tooltip. At the bottom the button
shifted down the page every time a mode was added, so where it sat depended on
how many modes already existed. It is an Orca Button in the Confirm style, width
matched to the mode column it creates a row in, and the panel opens on the
legend rather than on a paragraph.
Remove moves out of the right-hand column, where it sat one icon away from
Edit -- a destructive control beside the one pressed most -- to under the name
field it deletes, and its icon becomes a boxed minus rather than an X, which
read as "close". Reset joins Edit in the right-hand column, which is now
top-aligned so the icons hold position regardless of row height. Tool tiles are
square at 24px, and the header spacer tracks that width so the column titles
stay over their columns when the grid changes shape.
The two text fields were landing on GTK's near-black default border, invisible
against the panel: measured 45,45,49 against a 43,43,43 background, where the
settings fields above use 74,74,81. wxTextCtrl cannot color its own border, so
each sits in a one pixel frame taking the color TextInput derives for the
theme, and carries wxBORDER_NONE so Windows and macOS do not draw a native edge
inside it. The G-code boxes also take the monospace face EditGCodeDialog uses.
Bed zone fills drop to roughly half opacity in the Standard theme. They cover
whole quadrants for a whole session, so at swatch saturation they dominate the
scene. The collision strip is dimmed less, since it marks where a head hits
something. The deuteranopia, tritanopia and high contrast themes keep their
alphas: those are chosen for discriminability, which is the opposite trade.
Also fixes the icon size never applying. All four ScalableButton call sites
passed eight arguments, so the size bound to use_default_disabled_bitmap and
bmp_px_cnt kept its default of 16. Both are passed now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The two conflicts are both places where upstream landed on top of IDEX/IQEX
code. In GCode.cpp the relocated file header block meets the IMEX placeholder
block, and the placeholders are set first: file_start_gcode is processed through
the placeholder parser now, which throws on a name it does not know, so a script
naming {imex_mode} would abort the export if the header ran first. In
test_multifilament.cpp both sides appended a case at the end of the file.
- Bake: each layer is sampled only on its own painted area; analytic
projections used to stack every layer over every painted region, so the
top layer's texture showed on all of them (colour sampler too)
- Auto resolution follows the texture's texel size and sharpness again
- Unwrap: charts cut by each face's own normal (a cube gives 6 islands, not
12 triangles); non-disk charts (tubes, closed shells) are split until they
flatten; connected nets test real triangle overlap, grow from the largest
chart and are packed side by side
- UV edits are stored per unwrapped copy, so dragging a seam vertex no
longer moves its copies in neighbouring islands
- UV pane: tool strip with unwrap settings moved in from the panel, sharp
HiDPI icons, clearer island/edge/selection drawing with hover, texture
picker from the thumbnail, texture no longer lost on reopen (GL state
from the 3D view, background upload retries)
- Panel: whole-model select/erase as icons in the tools row; inactive
layers' paint shown muted; colour textures shown in colour in the picker
- Built-in displacement texture library
- Tests for unwrap segmentation, connected nets, UV edits and per-layer
sampling
* init
* drop usage of StaticGroup for ExtruderGroup
* completely remove StaticGroup from project
* fix alignment of "Not installed" text
* fix crash on linux while clicking edit button
* Fix background color on macOS
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Port of snaporca 5b1294de59. Parity OK: 17 files identical, 8 diverging at their
expected counts.
Every industrial sketcher gives you the origin and the axes as references. Here
the origin was only a SNAP target and the axes did not exist, so Symmetric needed
a third picked ENTITY as its mirror axis: symmetry about the sketch's vertical
axis first required drawing a construction line.
Every constraint reference resolves through four lambdas in the solver
(valid/ptOf/primOf/coordOf), so teaching those about three negative sentinel
indices makes the origin and both axes available to EVERY constraint type at
once. No new SketchEntity type, no serialization change; -1 still means "unset".
The references live in G_FIXED and add no degrees of freedom, which a test
asserts via the reported DoF.
SymmetricAboutY / SymmetricAboutX are two buttons that need no third pick and no
construction line. Making the axes clickable in the viewport is deliberately left
out: that is canvas hit-testing work with its own risks.
Recorded in the tests because it will catch the next person: sys.dragged[] is
populated only during a drag, so a plain sketch_solve of an UNDER-constrained
system may move any free parameter -- solvespace runs Newton, it does not
minimise movement. PointOnLine onto an axis is one equation in two unknowns and
the point legitimately slides along it. Those tests pin the free direction
instead of asserting the other coordinate is untouched.
VERIFICATION LIMIT, as with the previous two commits: this fork's kernel suite
still cannot run (find_package(assimp) fails at configure, snaporca-w80c). The
shared sources are byte-identical to snaporca's, where kernel is 2624 assertions
/ 206 cases and ALL LADDERS HELD across all seven rungs.
Port of snaporca 9fa304c77a. Parity OK: 17 files identical, 8 diverging at their
expected counts.
The everyday dimension in SolidWorks and Onshape, and this kernel had no form of
it. Distance constrains the straight-line gap; LockX/LockY pin one point's
ABSOLUTE coordinate. Neither relates two points along an axis.
DistanceX/DistanceY emit SLVS_C_PROJ_PT_DISTANCE against two unit direction
lines built in the solver's G_FIXED group, so they add no degrees of freedom.
THE DIRECTION IS SIGNED, and getting it backwards is silent. libslvs defines a
LINE_SEGMENT's direction as point[0] - point[1] (entity.cpp) and
PROJ_PT_DISTANCE constrains (pB - pA).dot(dir) (constrainteq.cpp:234), so the
reference lines are built head-first to mean +X and +Y.
The same signedness was a real defect in the GUI: the inline editor was
pre-filled with |delta|, so when the closest endpoint pair ran right-to-left,
opening the dimension and accepting the number shown would flip the point to the
other side of its anchor. Opening a dimension and accepting its own value must
be a no-op. The refs are now ordered so the shown value is positive.
On the CAD-1000-hours corpus, dimensioning and constraining is 31.9% of all
observed CAD time -- the largest single class, 7.6x feature operations. This is
the item in the constraint epic that lands most directly on it.
VERIFICATION LIMIT, as with the previous commit: this fork's kernel suite still
cannot run (find_package(assimp) fails at configure time, snaporca-w80c). The
shared sources are byte-identical to snaporca's, where kernel is 2603 assertions
/ 200 cases and ALL LADDERS HELD across all seven rungs.
Port of snaporca 9ec6405e2d. Parity OK: 17 files identical, 8 diverging at their
expected counts (DesignPanel.cpp 32, test_slvs_constraints.cpp 3).
Measured on the CAD-1000-hours corpus: 51.5% of observed CAD time is 2D sketch
work, and dimensioning/constraining alone is 31.9% -- the largest single class.
Two constraints every industrial sketcher has were missing here.
EqualRadius fixes a dead end rather than adding a feature. Picking two circles
and pressing Equal emitted EqualLength, which maps to SLVS_C_EQUAL_LENGTH_LINES
and constrains nothing on a curve: a silent no-op with no error. Equal is now
one button with two meanings, as in Onshape and SolidWorks.
Collinear emits PARALLEL plus PT_LINE_DISTANCE=0 rather than PT_ON_LINE, whose
internal valP param this libslvs port leaves at 0, drifting an already-collinear
pair.
Both types are appended at the END of SketchConstraintType: cereal serializes it
positionally, so inserting elsewhere reinterprets every saved recipe.
VERIFICATION LIMIT, stated rather than implied: this fork's kernel suite could
NOT be run. scripts/CAD/run-kernel-tests.sh fails at CMake configure time on
find_package(assimp), before any source compiles -- a pre-existing deps gap
(snaporca-w80c), not this change. The shared sources are byte-identical to
snaporca's, where the full gate passed: kernel 2588/195 and ALL LADDERS HELD
across all seven rungs.
Also fixes two defects in this fork's scripts/CAD/run-all-checks.sh:
- `cd $(dirname $0)/..` landed in scripts/ instead of the repo root, so every
rung looked for itself under scripts/scripts/. Broken since the script moved
into scripts/CAD/; the three sibling scripts were fixed then and this was
missed, so the gate has not run since.
- C defaulted to snaporca-gui, the OTHER fork's rig container, so this fork's
gate would drive snaporca's app and report green about the wrong binary.
run-kernel-tests.sh:31 documents the identical defect being fixed once
already for the build volume; this is the third instance.
Six of the surface entries, both Thicken variants, Rib, Axis, Coord Sys,
Mate and Delete Face all reused a sibling's glyph, so a drawer opened as a
column of identical faces and the card that opened rarely matched the entry
clicked. Fixed both halves: entry icons are now unique within their drawer,
and each card header uses the icon of the entry that opens it.
Two new glyphs, design_thicken and design_rib, are the only ones added —
everywhere else an existing icon already carried the right meaning
(design_revolve, design_offset, design_line, design_point,
design_c_coincident, design_delete).
The Surface drawer BUTTON deliberately keeps design_surface; only its
entries may reuse the solid glyphs, because a menu row carries its own
text label while two adjacent toolbar buttons do not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The Surface drawer used design_extrude, the same face as the Add-material
drawer, so the two buttons were indistinguishable in the feature bar.
design_surface.svg is a draped patch — deliberately unlike design_plane (a flat
parallelogram) and design_extrude (a box with an up-arrow) — with a faint
interior rule so it reads as a skin rather than a solid face. Same visual
language as the other 71: 24x24, no fill, #b6b6b6, stroke-width 0.85, round
caps and joins.
The five surface ENTRIES that also used design_extrude now use it too. That is
not cosmetic tidying: a flyout button's face follows the last-picked entry
(SetBitmap_(icon_names[i])), so changing only the drawer's default icon would
have been undone the moment the user picked anything. Surface Loft keeps
design_loft, which already suits it.
The six rows still share one glyph between them, so they are told apart by
label alone inside the flyout. Per-entry icons belong with snaporca-vrg
(Draft/Shell reusing design_dressup), not here.
Compiles clean; kernel untouched. Icon confirmed legible on hardware.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Catches the fork up from 449a4cf9fc (2026-06-28) to d6cb667b89 (2026-07-24).
Upstream touched 2326 files; 17 of them overlap the 164 this branch touches.
16 of the 17 auto-merged, including all three CMakeLists.txt, the build_all.yml
CI workflow, and every GUI file. The CAD core never conflicts: CadDocument,
SketchEngine, SketchSolver, McpControl and test_caddocument are files this fork
adds, so upstream does not touch them.
The one conflict, tests/libslic3r/test_3mf.cpp, was purely additive in all three
hunks and is resolved as a union: our test pinning that store_bbs_3mf embeds the
CAD recipe as Metadata/SnapOrca_cad.bin, upstream's multi-nozzle plate-metadata
round-trip tests, and both sets of includes. All three were verified present
after resolution rather than assumed.
NOT BUILD-VERIFIED, for a reason that predates this merge and is not caused by
it: this fork cannot be configured on nativedev at all. Its CMakeLists has
required Eigen3 5.0.1 since before the merge (line 592 pre-merge), while the
only deps image on the machine is snaporca-deps, built for snaporca's
find_package(Eigen3 3.3). CMake fails at configure, so nothing compiles.
That means this fork's Catch2 suite has never run. Every "suite green" figure
recorded for M1-M8 was snaporca's suite; the ports were verified by patch-apply
plus the CAD sources being byte-identical to snaporca's. Building an orca_cad
deps image with Eigen 5.0.1 is what would finally close that gap.
Pre-merge state is preserved at branch cad-mainline-pre-upstream-2026-07-25
(30d54f0074).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Resolved 4 conflicts:
- PrintConfig.hpp / Preset.cpp: upstream restored calib_flowrate_topinfill_special_order
(removed in the prior merge, now re-added and re-registered); kept it alongside our
IMEX options (imex_parallel_mode, imex_head_filament_map).
- Plater.cpp: kept our <sstream> include plus upstream's <optional> and plugin includes.
- tests/fff_print/test_gcodewriter.cpp: both sides appended disjoint scenarios after a
shared base. Reconstructed as upstream's full file (base + its 3 toolchange/H2C
scenarios + the boost/filesystem include its helper needs) followed by our 10
set_pressure_advance / set_temperature scenarios. 22 scenarios total, no duplicates.
When a print fails, DeviceErrorDialog now fetches the printer's captured camera
frame of the failure and shows it in place of the generic HMS illustration,
falling back to the local image and a drawn placeholder on older plugins or errors.
- Agent: add get_hms_snapshot through NetworkAgent / IPrinterAgent (BBL calls the
bound plugin symbol; other agents no-op, so old plugins degrade gracefully).
- DeviceManager: parse and clear m_print_error_img_id from the print-error message.
- Dialog: tiered cloud/local/placeholder image reusing the single image widget,
with a liveness-guarded async callback decoded on the UI thread.
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
