In gcode processor, the result check, increased the tolerance of printable area detection to 2mm, to adaption to the requirement of command line slicing.
jira: none
Change-Id: I5be4d6396989c35ae394339376c1133c8862c075
(cherry picked from commit 2f09c98caa9d2afc3e33a0bf17c6a6bb39992e0c)
0-sized extrusion path are now excluded from the heated bed range check to avoid false positive detection.
jira: none
Change-Id: Ia4bfff77880d107ce6b9542ef770050201ff0d90
(cherry picked from commit 00d9aedabed7e6b25767ddfe9871488f629c0dde)
erCustom extrusions are now excluded from the heated bed range check to avoid initial routing issues.
jira: STUDIO-13885
Change-Id: I706a85113fe7b6f5e1a3b67f5bc16d674ad85577
(cherry picked from commit c8b4f3c778a3c1a023693b9b4961da261507ae8f)
Added a check for Gcode traces outside the printable area after the backend slicer, allowing command-line slicers to detect abnormal results. The GCodeProcessor's m_result.gcode_check_result.error_code now includes not only dual-head print range checks, but also checks for the machine's plate print range, wrapping detection area, and height violations.
jira: none
Change-Id: I44072ece3b4b525c77328cec2f76e205eb559cc4
(cherry picked from commit 054f936243968687f536170374a233ec912e8e42)
1.Add a Trietree to match command instead of the switch sentence.
2.Support VM104 and VM109
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5f6b3d1bf87baebc0a20c2589a5138538469dfec
(cherry picked from commit 85cb4a41c2a7e42552d7b8c04864e5199ae942e9)
1.Add sync command. Now gcode and dirrectly add time sync command
2.Add support for ceil and floor in placeholder
3.Update change filament gcode for H2D
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6dd97cbd96bae1c2751c08357ff64947876d7471
(cherry picked from commit c99fcd454c2499b0c0e3ed9402a2182c00a9bffa)
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
(cherry picked from commit 17771d0fbf753dd22411ce490586958bd643264e)
to support different printable height of multi_extruder
jira:none
Change-Id: I265c65e15fc8f598c3456556557bb6977b5de820
(cherry picked from commit 933adbaaf0eaf361e39f131dd5536dca91214d43)
1. Machine with multi extruder should set length of extruder offset
to extruder num
2. Register retract_restart_extra
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3eb324cb91dc70b091c8922936d2709c361cc38
(cherry picked from commit 13df1ee7bab2bf13c9f5ffca6ad1228ff48e885e)
1. Nozzle Volume and Nozzle Type support multi extruder now
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie171b5105bd3830db3a992cadd365b785008c47a
(cherry picked from commit 2ebd14667e43dc745556f5e7bcbb7c2ccad4a007)
1.Save multi extruder state in gcode processor
2.Add machine exturder change time
3.Fix some naming issues
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9785331290515eeb908ff0ff01aad5aac44212d9
(cherry picked from commit b49d4ca1539cd9f473e0ee0c79a4287c0d5fe03b)
1.Caused by missing break of switch case
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie667eda4069f3e2487ed87081580e2540ae4da7b
(cherry picked from commit 9267bd65aa7a39c3a775890b59611fba7b3883ac)
* Ignore very tiny extrusions in flow rate scale (SoftFever/OrcaSlicer#9190)
* Don't show flow rate if it's not extrusion
* Merge branch 'main' into bugfox/gcode-viewer-flow-scale
Fix#6839 with final tool preheating on multitool machines causing in appropriate temp settings
Seems like Orca is trying to preheat the next tool in a multitool print, and ends up calling a heater off command in the last 30 seconds of any print.
This happens because there's no handling to check if the next active tool is an actual valid tool index, or its a T-1 command to end the print since we're using the last tool.
Simply moved the preheat commands into the conditional IF that automatically fixes this issue since the tool index is now properly evaluated.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Junction Deviation Machine Limit
jd 3
JD menu 2
JD operativo
limpieza
final
* default JD print menu without warnings
* to fix multiple instances
* Only at first layer
* Calibs upgrade
* Shown on Marlin2
Shown on Marlin2
CodeCleaning
* Update Calibration.md
* set on writer
---------
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Some portions of GCode (like BTT_TFT thumbnails) has to be CRLF in
order to work correctly. However, gcode post processor was ignoring
input line endings style emitting '\n' (LF) into post-processed output.
