* Add developer flag for printer agents
* Parse user print info on the UI thread to prevent heap corruption (#119)
get_user_print_info()'s HTTP fetch can run on a worker thread (e.g. BindJob),
but parse_user_print_info() mutates userMachineList (insert/erase/delete
MachineObject). on_machine_alive (SSDP) mutates the same maps on the UI thread
without locking, so parsing off-thread races the map and frees MachineObjects
out from under it -> heap corruption.
Keep all device-list mutation on the UI thread: parse inline when already on
the main thread, otherwise marshal via CallAfter so it stays serialized with
on_machine_alive.
* Prevent loss of user access code on LAN reselect
Keep user access code intact to maintain access rights even if
device slot is unpopulated, ensuring continuous connection
and status message reception.
* Harden send flow and separate upload failure recovery (#111)
* fix(send): harden FT send path + IP pre-flight UX
* Remove early returns
* Working Moonraker and Qidi printer agent transport (#104)
Folds the Qidi AMS box-mapping print
overrides (apply_box_mapping +
start_* wrappers) that the transport
fix builds on.
* Add support for runtime error status in plugins
Distinguish a loaded plugin whose
capability errored (RuntimeError,
warn-styled, stays checked) from a
load-time Error. Status now derives
via resolve_plugin_status(); enum
ordinal keeps dialog sort priority.
Unloading clears stale errors.
* Resolve duplicate agent ID conflicts
Reject a printer-agent capability
whose agent ID is already owned by
another capability or built-in:
flag the plugin error, disable the
capability, and warn the user
instead of silently ignoring it.
* fix: checkbox should depend on plugin is_loaded status
* Replace fake-enum printer agent dropdown (#121)
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
* Reset device selection on agent swap or unload (#124)
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
* Gate agent mode behind use_printer_agents toggle
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
* Track BBLPrinterAgentPlugin.py
* Add printer-agent and plugin status tests
Ports the agent lifecycle, duplicate
agent-id, built-in-id clash and
status-resolution tests. The loader
runs on a detached worker thread, so
the lifecycle tests live in their own
executable. Tests install the
production unload-side registry
wiring themselves (no GUI in the
test binary) and register agents
manually so concurrent loads stay
deterministic.
* fix: pin HTTP to prevent connection refusal
Set `use_ssl` to false to ensure Moonraker
connectivity, as the service uses HTTP rather
than HTTPS, preventing connection issues. Initialize
device info early for reliable name resolution.
* Bring Moonraker device panel to feature parity
The monitor panel showed wrong or missing
data for Moonraker printers, and its
controls did nothing.
Push payload now carries layer number and
total layers. Remaining time replaces the
wrong total_duration - print_duration
formula. The chamber light toggle maps to
Klipper SET_PIN / SET_LED, and pause,
resume and stop post to
/printer/print/{action}. Task thumbnails
resolve via /server/files/thumbnails onto
a new MachineObject thumbnail url.
Filament sync switches to pull mode so the
agent is queried on demand.
Not compiled or run.
* Stop blocking print on unreported nozzle data
* fix: make Klipper macro lamp control reliable
* Surface Moonraker webcams and gate unrunnable controls
* Keep Bambu AMS dialect out of the agent waist
M620 is Bambu firmware dialect, not a
neutral command. Composing it in
MachineObject let non-Bambu agents
(Moonraker/Klipper) forward it and
report success on firmware that
cannot run it.
Agents now own the dialect: the
default refusal on IPrinterAgent
returns not-supported so the UI
can say so; BBLPrinterAgent keeps
the byte-identical composition.
* Fix multi-color filament logic
Reuse color decoding across functions to improve
code readability and maintain consistency in
multi-color filament handling.
* Move Moonraker commands off the UI thread
Pause/resume/stop, g-code sends, temps, and
light ran synchronous HTTP on the UI thread,
freezing the app up to 10s per click on slow
or unreachable printers.
Run them on a single agent-owned FIFO worker
so g-code ordering is preserved, while command
translation stays synchronous so unsupported-
command dialogs still work.
Add a pending-disabled state to the pause,
resume, and abort buttons for Moonraker-family
printers: the icon only flips once the
WebSocket reports the real state, which also
rules out double-click races.
* Show Snapmaker U1 camera in Device tab
The U1 exposes no /server/webcams/list entry;
its camera only captures after an explicit
camera.start_monitor RPC, which the Moonraker
websocket executes unauthenticated but only
answers over MQTT - so the call is fire and
forget.
Start the camera when the camera view is
shown and renew every 300 s: the printer
retires the capture task at ~362 s and
stop_monitor is accepted but ineffective,
so teardown is simply to stop renewing.
Frames land in monitor.jpg as still JPEGs
(~2 fps at interval 0), so the webview loads
a local HTML wrapper that repolls with a
cache buster.
* fix: start stream when camera URL changes
* fix: stop Qidi slot parse throwing on null
* Keep printer-agent progress in sync
Keep the shared task progress aligned with agent
reports that lack Bambu cloud task identity.
Release the lazily allocated task during reset to
avoid leaks when machine objects reconnect.
* docs: document the printer-agent subsystem
* fix: merge access codes into one
* Reconcile implementation split with PR tip
* feat: abstract remaining gcode commands in devicemanager
* refactor: abstract bambu specific protocol to printer agent
* refactor: push bbl workflows to bbl printer agent
* remove unused
* fix: default impl
* fix callback error
* fix: remove redundant cache
* specify api for getting file transfer url
* revert file transfer abstraction
* fix: ams filament mapping workflow
* feat: update qidi to use subscription based filament sync mode
* fix: resolve stubgen byte header conflict
* fix: ams sync info and periodic ams sync via subscription workflow
* fix: skip filament sync dialog if filamentSyncMode is none
* feat: parse nozzle information for qidi and moonraker printer agents
* fix: extend access code requirements t 0, 8 or more characters.
* remove irrelevant docs
* fix: remove heavy includes from IPrinterAgent
* fix: defer filesystem and camera abstractions
* fix: remote do_fetch_filament_info from tests
* cleanup moonraker and snapmaker printer agents
* fix: access codes regression
* fix: tests
* fix: printer agent switching on preset change
* fix: remove unused variable
* fix: snapmaker U1 SelectMachineDialog blocking print
* fix: merge artifact
* fix: clear up some unrelated changes
* feat: connect to cloud printer and monitor
* feat: connect to cloud printer and monitor
* feat: generic camera stream support for http snapshot and rtsp
* fix: build & access code UI
* feat: generic camera stream support for http snapshot and rtsp
* fix: build & access code UI
* feat: connect to cloud printer and monitor
* feat: connect to cloud printer and monitor
* fix: build errors
* feat: camera via webrtc
* fix: build
* fix: cmake
* feat: remove frame assembler and change config to set protocol
* fix: orcaprinteragent refactor
* fix: LAN paths and camera stream
* feat: use ffmpeg to render http camera stream
* fix: make model_id/dev_type optional instead of blocking
* fix: connect via ip dialog
* feat: LAN impl for Orca Printer Agent
* fix: model_id resolution method for non bambu printers
* fix: ffmpeg http camera stream jittering due to incomplete frames
* fix: revert sdcard check
* feat: check printer storage status before sending
* fix: moonraker printer agent hang on printer power cut
* fix: shim layer for any compatibiliity changes
* fix: cloud printers were using the wrong MQTT endpoint
* feat: cloud download via HTTP
* temp: doc for intended change
* fix: warnings
* fix: warnings
* fix: camera auto-play on startup
* fix: split infra from impl
* fix: uninitialized ams state blocking print
* Fixes nullptr deref
* Log first before std::move
* fix: printer agent virutal optional functions
* fix: parameterize orcaslicer_copy_test_dlls() for printer_agent_plugin_tests
* Revert "fix: parameterize orcaslicer_copy_test_dlls() for printer_agent_plugin_tests"
This reverts commit 2f566e3779.
* Guard libdatachannel. Remove unused code
* fix: unit tests & unused variables
* fix(ci): deps build order for datachannel
* Resolve printer agent first before getting cloud printer agent
* fix(ci): set depends openssl
* fix: re-include apply header guarded by ifdef __APPLE__
* fix(ci): add libdatachannel to flatpak manifest
* fix: add internal_developer_mode chekc back to MediaPlayCtrl::load()
* fix: invoke js clearInterval on WebMediaController::stop
* fix: change rtc log level
* fix: inject provider, agent id and generation to get_user_print_info to ensure correct metadata
* fix: revert moonraker specific behavior
* fix: remove stale comment
* fix: use ORCA_CLOUD_PROVIDER instead of hardcoded string
* fix: remove hardcoded ICE servers
* feat: enable https camera stream mode
* fix: move non-mandatory printer agent function stubs to IPrinterAgent
* fix: dedupe compatible printer type check
* fix: stop the correct media controller
* fix: scope get_my_machine_list to printers listed under the current printer agent
* fix: move printer agent plugin tests into test_plugin_lifecycle.cpp
* fix: always build bundled DataChannel dep
* fix: disable unused DataChannel media support
* revert: filament sync work
* fix: wrap command_* with small wrapper
* fix: regression bug, connecting to bambu needs bblp username
* fix: default impl for vendor agnostic gcode commansd
* refactor: media controller playback routing and ownership
* fix: bump libdatachannel ver & update flatpak to use tar instead
* fix: stop flatpak DataChannel build from re-cloning over the sandboxed network
* fix: update windows ffmpeg prebuild
* fix: update printer agent plugin API
* fix: shift camera signaling channel to network agent
* fix: follow external-packages for flatpak libdatachannel deps & add flatpak path to use source_dir
* feat: add printer-agent.md doc to HLSD
* fix: guard DeviceManager command dispatch when no printer agent is bound
* fix: port BBL implementations from #15711
* refactor: connect_printer api and dialog
* fix(tests): make omitted printer agent operations answer like a missing agent
* fix: preserve printer agent defaults in PrinterAgentPluginCapabilityTrampoline
* test: cover printer agent default command dispatch
* fix: validate windows FFmpeg avformat library
* feat: extend optional printer model warnings to calibration & ams workflows
* fix: handle malformed printer progress values safely
* fix: clear webview document on stop
* chore: reduce diagnostic logging level to trace
* refactor: centralize printer compatibility checks
* tests: add device manager integration coverage
* tests: cover WebMediaController lifecycle with wxWebView stub
* fix: make integration tests headless
* refactor: collapse command_ams_refresh_rfid and command_ams_refresh_rfid2
* refactor: make printer connection SSL agent-specific
* fix: persist input printer host and port
* fix: use correct device id for Moonraker connections
* fix: make moonraker gcode commands asynchronous
* fix: preserve moonraker device names
* fix: add include for non BBL_RELEASE_TO_PUBLIC path in BBLPrinterAgent
---------
Co-authored-by: Andrew <159703254+andrewsoonqn@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Lam Wei Lun <weilun.lam@gmail.com>
Include variant-aware validation, temperature and pressure controls, named nozzle selection, and filament sidebar refresh.
Co-authored-by: Codex <codex@openai.com>
* Confine Updater Archive Extraction to the Target Directory
The preset updater extracted downloaded archives by appending each entry
name to the cache directory, and the network plugin installer did the same
for the plugin folder, without checking that the result stays inside it.
Move the updater's extraction into libslic3r as extract_archive_confined,
which validates every entry with is_path_within_root before writing
anything and fails the whole archive if one entry resolves outside the
target. The plugin installer now rejects such an entry the same way. Well
formed archives extract exactly as before.
* Harden Archive Extraction Against Symlinks
The plugin installer now creates a symlink entry only when its target is
relative and, joined to the link's own directory, passes
is_path_within_root, via the new is_symlink_target_within_root helper.
Before writing any entry it checks the destination with symlink_status, so
an existing symlink, dangling or not, is replaced rather than followed, and
it creates parent directories inside the existing error handling.
extract_archive_confined replaces a symlink at a destination file the same
way.
is_path_within_root now ignores a trailing separator on the root, which
previously made every path fail the check.
* Validate Plugin Symlink Targets Before Replacing Existing Files
A symlink entry's target is now read and checked before anything already
at its destination is removed or renamed aside, so an archive rejected
for its link target leaves the installed plugin files in place.
* Reject Paths with an Embedded NUL When Confining Extraction
is_path_within_root compared each component with "..", so a name such
as "..\0" passed the check. The filesystem calls stop at the NUL and
act on a shorter path than the one that was checked: a symlink target
read from a plugin archive as raw bytes was created as "..", pointing
out of the plugin directory.
A path containing a NUL is now rejected before anything touches the
filesystem, which covers every caller, including entry names taken from
the Unicode Path extra field.
* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Keep mixed-color filaments intact when the extruder count changes
The extruder-count spinner resized the filament arrays in bulk at the tail,
which is where mixed-color slots live, so a new filament landed behind the
mix and the sidebar skipped a slot number. It now adds and removes one slot
at a time through the same calls the sidebar's +/- buttons use, so a new
slot opens ahead of the mixed tail and a removal renumbers object filament
ids, painted facets, custom g-code and mixed components rather than
clamping them away.
Drops the vector overload of set_num_filaments(), which this leaves without
callers.
* Add caching system for presets
* Removing user\bundle serialization and keeping it only for system presets
* Integrate caching into WebGuideDialog which speeds up time of SetupWizzard and PrinterSelection dialog
* Add CI\CD step to prepare cache file in ahead of time so user does not need to wait
* Add partial cache generation when only one of the vendros is changed to speed up recalculation time
* Handle corrupted files
* Add cache to GuideDialog as previos version didn't work as expected
* Add inspecting tool and fix CI cache generation
* Generate cache per vendor
* Simplify code by mergin it in PresetBundle
* Simplify code a bit more
* Add cereal serialize() to VendorProfile, PrinterModel, Preset, and Semver
* Remove CachedPrinterModel/VendorProfile/Preset mirror structs from VendorCache
* Fix use-after-free in CallAfter lambda; replace raw thread pointer with unique_ptr
* Use get_vendor_cache_key() to match cache keys written by the app
* Remove BOM added by VSC
* Skip invalid vendors
* Remove leftover cache file
* Fix build for windows arm64
* Revert json cache back
* Update check for stale cache
* Serealize all value fields for Preset class to minimize regression later
* Minimize field duplication by moving Cache thing into PresetBundle
* Add tests for Cache system
* Add a bit more tests
* Merge branch 'main' into feature/cache_profiles_and_optimize_loading_speed
* Rvert from per-verndor to single cache file
Replace N per-vendor .cache files with a single system_presets.cache
that holds all vendors and presets in one serialized blob.
Cache load is now all-or-nothing: on hit all vendors are applied from
the bundle (sub-second); on miss all vendors are parsed from JSON and
a fresh bundle is written to the user cache dir.
Invalidation is driven by bundle_key - a sorted concatenation of all
vendor JSON version strings. Any vendor update invalidates the whole
cache and triggers re-parse on next launch.
Guide wizard (WebGuideDialog) loads the bundled cache into a plain
PresetBundle instead of a separate VendorGuideData struct, removing
the duplicate data model.
generate_system_cache simplified from a per-vendor loop to a single
save_system_presets_cache() call producing one output file.
* Transfer all Preset fields from cache via move assignmet
apply_vendor_preset_group was copying fields manually and missed
bundle_id, user_id, base_id, sync_info, updated_time, key_values,
ini_str. Replace field-by-field copy with move assignment of the
fully-deserialized Preset, then restore the vendor pointer which
is excluded from serialization.
* Ignore cache for future
* Remove not used files
* Ship one preset cache per vendor in place of the profile JSONs
Each vendor's system presets serialize into a single <vendor>.opc built at
package time, and a shipped build carries that file alone — the profile JSON
and its sub-file tree are pruned. The vendor loader, the setup wizard's profile
list and the resource installer all read a vendor through its cache, falling
back to parsing whenever one is absent, stale or unreadable, so the cache stays
an optimization and never a source of truth. Caches hold presets in source form
and resolve inheritance at load, through the same code the JSON path uses.
* Make the preset cache self-describing and load each vendor from the system folder alone
The cached DynamicPrintConfig is keyed by name, through a per-file dictionary of the
distinct opt_keys, the type each was written as, and the distinct enum value names,
instead of by serialization_key_ordinal — a position assigned by declaration order at
static init, where inserting one option shifts every later ordinal and the lookup then
succeeds on the wrong option. Because a name-keyed payload drops the options this build
cannot place rather than being rejected wholesale, the schema fingerprint goes, and with
it the two fallbacks that existed only because an installed cache died on every app
upgrade: the second lookup tier into resources/profiles and the parse fallback to the
same place. A vendor is loaded from <data_dir>/system/ and nowhere else, as on main —
which is what makes the app write its .opc files there again.
* Simplify the preset cache internals after review
* Use the shared temp-dir helper in the preset bundle loading test
* Bound stamp string reads in the preset cache
* Speed up the setup wizard with a profile-data cache
The wizard's per-vendor fast path threw on vendors present only in
resources, falling back to a ~29 s raw JSON scan on every open. Each
vendor now loads from the directory it was found in, and the derived
model/machine/filament/process catalog is cached whole in
<data_dir>/cache/wizard_profile_data.json, stamped by each vendor's
name and version - a fresh cache makes an open one file read, with no
bundle built and no presets installed (~0.2 s vs ~2 s).
* Remove debug SVG dump from a geometry test
* Move the per-vendor cache file format into PresetCacheFormat
* Move the vendor install helpers from PresetBundle into Utils
* rename
* fix flatpak
* change cache version to 1
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
# Description
Printers discovered/bound under one printer agent (e.g. built-in BBL)
were leaking into another, independent agent's "My Device"/"Other
Device" lists and inheriting its saved access code, since neither the
device list nor bind state was ever scoped by which agent found them.
- Add printer_agent_id to MachineObject/BBLocalMachine, stamped at
discovery/bind time; filter get_my_machine_list(),
get_my_cloud_machine_list(), and update_other_devices() by it.
- clear_other_devices() now drops entries stamped by the outgoing
agent on swap, so the incoming agent's own discovery re-inserts and
re-stamps them fresh instead of leaving them stale-tagged forever.
- Scope access_code by (dev_id, printer_agent_id) on BBLocalMachine
(LAN only since cloud's userMachineList is always refreshed live from
the account API, so it isn't at risk the same way), with a
BBL-only legacy fallback to the old flat access_code/user_access_code
keys so existing bindings keep working.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
* Remove titlebar from splash screen on Wayland
* Broadly check for window decorations and added explanatory description
* Fixed hiding title bar on Wayland for all desktop environments
* Update format
---------
Co-authored-by: noisyfox <timemanager.rick@gmail.com>
SoftFever