#15668 saves the compiler cache on cancelled and failed builds and then
drops the older entries for the leg on the ref. actions/cache/save only
warns when its tar fails, so a cancelled build whose ccache directory
was still being written saved nothing, the drop ran anyway and deleted
the leg's last good entry. The next run on main restored nothing and
compiled cold, and so did every PR that restored in the gap. Run
35405244634 (Flatpak x86_64, 2026-09-18) did this to
ccache-Flatpak-x86_64-35397824860-1; between 13 and 18 September 9 of
87 cancelled main build jobs did the same.
Look the new entry up before deleting anything, and keep the older ones
when it is not there.
Adds the LulzBot Mini 1 (single extruder, 0.5 mm nozzle, 2.85 mm filament)
to the existing Lulzbot vendor, which previously shipped only TAZ models.
Values are taken from LulzBot's own current slicer configuration
(github.com/lulzbot3d/CuraLE) rather than estimated:
- geometry and custom g-code from resources/definitions/single_mini_mini_1.def.json
and resources/gcodes/mini_1/{mini_1_start,mini_1_end}.gcode
- filament temperatures and cooling from resources/materials/*.xml.fdm_material,
overridden by resources/quality/single_mini/<material>/*.inst.cfg
The start g-code reproduces the Mini's nozzle wipe and four-washer G29 probe,
with the filament-type temperature conditionals used by the sibling TAZ profiles.
One deliberate departure from current CuraLE: the pre-wipe retract is 30 mm,
the value used by Cura LE 4.13.x, rather than the 4 mm current CuraLE uses.
The Mini probes by electrical contact between nozzle and washer, so the nozzle
must stay clean through the wipe and all four touches. At 4 mm the melt zone
stays full and can ooze onto a washer, which caused auto-levelling failures on
hardware; 30 mm empties it. The cost is a ~24 s purge at print start.
The three filament presets follow docs/HLSD/filament_id.md rule 4: a vendor
tuning a generic material inherits Generic X @System, keeps the Generic X base
name and declares no filament_id, so identity stays with OrcaFilamentLibrary.
Their compatible_printers is the Mini alone, disjoint from Generic X @Lulzbot
(TAZ only) as rule 3 requires. They exist because temperature is a filament-scope
setting, so LulzBot's values need printer-scoped presets. All six plate types
carry the same temperature, because the Mini has a single bed and curr_bed_type
can hold a stale value carried over from another printer.
Strictly additive: no existing profile is modified, so TAZ behaviour is
unchanged and no migration is required. Lulzbot.json is bumped to 02.04.00.05.
Verified with scripts/orca_profile_tool.py check and scripts/check_profile.sh
on the full tree (profile tool, system validation, slice, filament subtypes and
custom-preset fixtures all pass), by diffing sliced output against LulzBot's own
Cura LE g-code for the same model and filament (temps, retraction, speeds and
the full wipe/probe sequence match), and by printing a 3DBenchy on a Mini 1 over
OctoPrint.
Claude-Session: https://claude.ai/code/session_012aLyqsXB7FKqwQdE2QF7Et
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Preset::get_printer_type matches a preset's printer_model against every vendor's model names and returns the first hit, so two bundles declaring one name make the lookup order-dependent, and the Add Printer list shows the printer twice. The existing name check is per bundle, because base profiles share names across vendors by design; this one covers the global machine_model namespace and runs over the whole tree, like the setting_id and filament_id checks.
* Rework Ultimaker profiles
The Ultimaker profiles where not usable by default
* Fixes
* couple small fixes
* Rework Ultimaker profiles
The Ultimaker profiles where not usable by default
* Fixes
* couple small fixes
* Fixes
* fix errors
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Fixed bug to ensure filename format respects multi-extruder filament selection
Improved filename format to ensure that the selected filament is included in the filename and not the [0] filament
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
This is needed for the AnkerMake M5 and M5c to have correct print time estimates. Fixes a random super-long time on the M5 touchscreen.
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Fix incorrect printable_area for Raise3D Pro3 and Pro3 Plus profiles
All Raise3D Pro3/Pro3 Plus machine profiles (Left, Right, Dual) shared
the same 340x300 printable_area regardless of single vs dual extruder
use. This overstated single-extruder X travel by 40mm and failed to
shrink the Dual profile to the real nozzle-overlap zone.
Corrected to Raise3D's published build volume specs:
- Single extruder (Left/Right): 300 x 300 mm
- Dual extruder: 255 x 300 mm
printable_height (300 for Pro3, 605 for Pro3 Plus) and origin (0,0)
are unchanged; both were already correct.
Source: https://www.raise3d.com/pro3-series/
Co-authored-by: Jon Ashton <ashtonj@zentechman.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
* Increase max volumetric speed for CR-ABS filament
* Update filament settings for CR-PETG profile
* Increase max volumetric speed from 16 to 18
* Increase max volumetric speed from 16 to 18
* Increase max volumetric speed for CR-PLA Matte
* Adjust filament temperature and speed settings
* Update filament settings for ENDER FAST PLA profile
* Modify pressure advance and filament load settings
* Adjust filament cost, speeds, and pressure advance
Updated filament settings for Hyper PETG @K2 Plus.
* Update filament cost and pressure advance values
* Increase max volumetric speed from 10 to 14
* Enable pressure advance in filament profile
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* profile: reorganize the ZR Ultra family and fix the Ultra S tool count
- Adds a new fdm_ultra_common profile to hold all common ZR Ultra toolchanger attributes.
- The S variants are the base machines plus an enclosure heater and filtration, so each now inherits its matching ZR Ultra profile instead of duplicating the per-nozzle values
- Also fixes Ultra S 0.6 and 0.8 - original were declared a single nozzle_diameter entry, so OrcaSlicer treated four-tool machines as single-extruder.
- ZR Ultra S 0.8's retraction_minimum_travel now matches the base Ultra.
- nozzle_diameter stays declared on each S variant rather than inherited, even
though the value is identical to its parent's. Several profile consumers read
these files without resolving `inherits` -- the config wizard's loader and the
web Profiles page among them -- and 1012 of the 1013 instantiated machine
profiles in the tree declare it, so this is the format's expectation rather
than redundancy. The same rule is enforced for filaments' compatible_printers
by scripts/orca_extra_profile_check.py.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fix errors
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
fix: install all Windows runtime DLLs
Keep the runtime DLL list local while it is assembled.
The previous PARENT_SCOPE assignment exported the initial list before the OCCT DLLs were appended. CMake then created a local list containing only the appended OCCT entries, causing the generated Install manifest to omit GMP, MPFR, WebView2, FreeType, and FFmpeg DLLs.
Export the completed list only after all runtime DLLs have been added.
* add eryone config
* add eryone config
* add eryone config
* Add 13 Eryone filament presets for the Thinker X400 0.4 nozzle
Rework the stale author branch onto the current Eryone bundle. Main already ships
the Thinker X400, so the duplicate "Eryone Thinker X400" machine and process family
from the branch is dropped and the new filaments are pinned to the existing
"Thinker X400 0.4 nozzle" variant. Hand-typed setting_id/filament_id values are
replaced with generated ones, the bundle version is bumped, the stray .info sidecars
are removed, and Eryone PETG-CF's filament_settings_id is corrected to match its name.
* fix errors
---------
Co-authored-by: Eryone <technical@eryone.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
The slice check centres its cube on the bed, puts the prime tower beside
it, then pulls the tower alone inside the printable outline. On a bed too
narrow for the estimated footprint that pull drags the tower back over
the cube: Volumic EXO42 IDRE MIRROR MODE (189 mm wide, 87.6 mm estimate)
logged "gcode path conflicts found between WipeTower and cube" in every
run, and three ~105 mm beds were left with 0.15 to 3.3 mm of clearance.
The cube and the tower's footprint are now pulled inside as one rigid
pair, so the clearance between them is fixed by construction. A bed too
small for the pair keeps the old placement, and presets that were never
clamped keep their exact layout.
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
A Python printer agent plugin could take the host down, and one of its
operations could never report its result. This PR fixes both in
`PrinterAgentPluginCapabilityTrampoline.hpp`.
## Changes
### A faulty printer agent no longer throws into the GUI
`IPrinterAgent` reports failure through return values, and none of its
callers catch. A Python `raise`, a missing override or a wrongly typed
return from a printer agent plugin therefore escaped the trampoline as a
C++ exception.
Every trampoline operation now catches, logs `Printer agent plugin
'<key>': <operation> failed: <error>`, and answers with what
`NetworkAgent` returns when no printer agent is set. `BBLPrinterAgent`
returns the same values when the Bambu plug-in is unavailable:
- `-1` for every `int` status code
- `false` for `start_discovery` and `fetch_filament_info`
- `""` for `get_user_selected_machine`
- an empty `AgentInfo` for `get_agent_info` (registration already
rejects an empty agent ID)
- `FilamentSyncMode::none` for `get_filament_sync_mode`
`ORCA_PY_AGENT_OVERRIDE(ret, name, ...)` derives the fallback from the
return type through `printer_agent_failure<ret>()`, so the call sites
carry no fallback values of their own.
An exception is the safety net for plugin bugs, not an error channel. A
plugin reports an expected failure by returning a code, as the Bambu
plug-in does. A raise is logged as a failure and collapses to the
generic `-1`, so the GUI shows the generic message instead of the
specific one (`-18` cancelled, `-4020` FTP upload failed, …).
### `bind_detect` results now reach the host
`detect` is an out-parameter (`detectResult&`). pybind11 casts a
reference argument to an override with a copy, so a plugin that filled
in `detect` wrote to a throwaway object and the host always saw an empty
`detectResult`. It is now passed so that Python edits the caller's
struct. Plugins see the same `DetectResult` argument as before.
## TODO
- Expose the `BAMBU_NETWORK_*` return codes to Python (the
`orca.printer_agent` binding and the generated stub from
`scripts/generate_orca_python_stubs.py`). Plugins can already return
them, but only as hard-coded numbers.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
- New `tests/slic3rutils/test_plugin_printer_agent.cpp`: an agent whose
operations raise, one that omits them, and one that returns the wrong
type all answer like a missing agent, and the interpreter stays usable.
A working agent's answers reach the host unchanged, including
`request_bind_ticket`'s out-param and the fields a plugin writes into
`bind_detect`'s `detect`.
- The `bind_detect` check failed before the fix (`"" == "192.168.0.2"`)
and passes after.
- `slic3rutils` passes under `ctest` (144/144); full Release build clean
on Linux.
- End to end on Linux with a test plugin whose chosen operations raise
(`start_discovery`, `get_filament_sync_mode`, `disconnect_printer`):
selecting the plugin's agent in the printer preset and switching back
logged each raise as a `Printer agent plugin '…': <operation> failed`
line, and the app kept running and closed cleanly (exit 0). Without the
guard, the first raise (`start_discovery`, on selecting the agent) ended
the app with `Uncaught exception` and SIGABRT (exit 134); that run used
a build whose printer-agent files are identical to `main`.
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
pybind11 copies a reference argument to an override, so a Python
printer agent that filled in detect wrote to a throwaway object and the
host always saw an empty detectResult. Pass it as a pointer so Python
edits the caller's struct.
Add the one-all-printer-preset-per-product rule to the orca-profiles skill:
color is chosen at runtime, a material family is a new product and a color is
not, and CI does not catch per-color presets so it stays a review call. Note
that @System is the all-printer convention rather than an enforced check.
orca.host.ui.create_dock_panel(html, title, width, height, on_message,
on_close, dock) hosts plugin HTML in a pane of the Plater's dock manager,
next to the sidebar, and returns a UiDockPanel handle
(post/show/hide/close/is_open). The arguments follow create_window(). The
panel uses the window.orca bridge of plugin windows, restores its position
and size from the saved window layout, hides with the Plater off the Prepare
and Preview tabs when floating, and is closed with its plugin; plugin panes
are removed in MainFrame::shutdown().
The web view hosting moves out of PluginPage into a shared WebPanel base:
bootstrap page and swap to the plugin HTML, theme, element-default and
bridge scripts, window.orca message parsing, delivery to the page, and live
re-theming, also re-applied on every load after the swap. Pages tabs and
docked panels both derive from it. Pages tabs now re-theme in place on a
theme change instead of being reloaded, and a window.orca call a host does
not support is logged.
What the hosts share no longer lives in one of them: the bootstrap page, the
base URL and the plugin-window bridge move to Widgets/WebHosting, used by
WebDialog and WebPanel alike. The Plater restores plugin panes with a new
saved-layout parser, GUI/AuiPaneLayout, kept in its own small header so
slic3rutils can test it without pulling in the Plater.
The web hosting classes carry no plugin name, so other hosts can reuse them:
PluginWebDialog becomes WebDialog (its bootstrap page moves to
resources/web/dialog/WebDialog), and destroy_for_plugin(),
load_plugin_content() and plugin_defaults_user_script() become
destroy_silently(), load_page_html() and element_defaults_user_script().
Includes a sample plugin (sandboxes/orca_dock_panel_plugin_any.py) and
binding and layout-helper tests in slic3rutils.
IPrinterAgent callers do not catch, so a Python raise, a missing
override or a wrongly typed return from a printer agent plugin escaped
into the GUI. Each trampoline operation now logs the failure and
answers with NetworkAgent's no-agent value: -1 for status codes, the
empty value otherwise.
* Add PlastAR and Printalot filament vendors
Two Argentine brands from Printalot: PlastAR (budget PLA) and Printalot
(ABS). Each has a tuned @base plus per-color presets covering the
manufacturer's color lineup.
PlastAR PLA: flow 0.98, 1.75 mm, nozzle 220 C (190-230), bed 60 C; 14 colors.
Printalot ABS: flow 0.94, density 1.05, retraction 0.2 mm, max volumetric
18 mm3/s, nozzle 250 C (240-270), bed 100 C; 14 colors.
Per-color presets inherit their @base (no per-color parameter changes).
Passes scripts/orca_extra_profile_check.py.
* Ship PlastAR and Printalot as a single Printalot filament vendor
Place both Argentine lines in one OrcaFilamentLibrary/Printalot bundle and follow the library's brand shape: a non-selectable @base plus one all-printer @System per product, which is where a library preset meant for every printer belongs. The former per-color presets are dropped, leaving PlastAR PLA and Printalot ABS with their PLA and 250 C ABS material values. setting_ids are minted by the tooling; filament_ids resolve through the @base roots.
---------
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add Polymaker PLA Pro filament profile
Polymaker PLA Pro is present in the tree only as printer-scoped variants
under Snapmaker U1 and Anycubic Kobra S1, so it is invisible to every other
printer. This adds it to the Orca Filament Library as OGFPM020 so it is
selectable generally.
Values are taken from the manufacturer's published print settings and
cross-checked against the two existing vendor profiles:
density 1.23 g/cm3 both existing profiles agree
softening 55 C both existing profiles agree
nozzle 220 C (210-230) manufacturer's stated range
max volumetric speed 15 Snapmaker 15, Anycubic 16
Flow ratio is set to 0.96, matching the Snapmaker profile. Worth noting for
review: the two existing profiles disagree here -- Snapmaker 0.96, Anycubic
0.85 -- because flow ratio depends on the extruder as much as the filament.
Any single value in a vendor-neutral preset is a starting point users should
calibrate; 0.96 is closer to the generic PLA baseline than 0.85 is.
setting_id assigned by scripts/assign_vendor_setting_ids.py.
OrcaFilamentLibrary version bumped 02.04.00.03 -> 02.04.00.04.
* fix errors
---------
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
peachismomo