# Description
Transforming internal 3D Files to DRC to reduce orca size
## Calibs
(Not counting temperature_tower)
Original 6,01 MB
Converted 1,57 MB
- Mesh (STL/3MF) to LossLess DRC
- SCV-V2 116kb -> 15kb
- fast_tower_test 66kb -> 9kb
- ringing_tower 172kb -> 22kb
- pressure_advance_test 124kb -> 16kb
- tower_with_seam 2kb -> 1kb
- retraction_tower 1.726kb -> 97kb (done at 25, if 0 = 212kb)
- ~~temperature_tower~~ Updated, fixed, wider range and Draco in: #12103 5.075kb -> 485kb
- vfa 1.453kb -> 179kb
- Step
- SpeedTestStructure 1.312kb -> 86kb
- Imported:
- Linear Deflection: 0.002
- Angle Deflection: 0.25
- Exported as LossLess DRC
## Handy Models
Original 4,66 MB
Converted 1,53 MB
- STL/3MF to LossLess DRC (Maybe reduce the bit depth???)
- 3DBenchy 2.417kb -> 570kb (done at 25, if 0 = 1.340kb)
- calicat 43kb -> 6kb
- ksr_fdmtest_v4 128kb -> 74kb
- Orca_stringhell 63kb -> 37kb
- OrcaToleranceTest 758kb -> 94kb
- Stanford_Bunny 755kb -> 187kb (done at 25, if 0 = 316kb)
- Voron_Design_Cube_v7 34kb -> 21kb
## Bit used
After some test with a lot of models and all possible combinations it's safe to say that >20 is BondingBox and mm3 volume the best it can.
So i used 25 just as a safe value in:
- Stanford_Bunny
- 3DBenchy
- retraction_tower
<img width="324" height="499" alt="imagen" src="https://github.com/user-attachments/assets/bb5000cf-c1fa-4153-af2f-691ea59bc254" />
<img width="324" height="499" alt="imagen" src="https://github.com/user-attachments/assets/f38e3528-0d05-4621-984e-f107a0eec91e" />
## MultiPart 3MF
Didint change them, too much trouble for small changes.
# Description
### `src/libslic3r/PrintApply.cpp` changes (line 318)
Change `const auto` to `const auto&` for loops (simple optimization) .
### `src/slic3r/Utils/CalibUtils.cpp` changes (lines 762, 766, 779, 783/784, 814, 816, 831, 835, 837, 1001)
Define config_pattern
`const auto& config_pattern = SuggestedConfigCalibPAPattern();` (line 762 and 814)
Replace calls of `SuggestedConfigCalibPAPattern()` with `config_pattern` (lines 766, 775, 779, 783, 784, 816, 831, 835, 837)
Change `const auto` to `const auto&` for loops (simple optimization) (lines 816, 835, 837, 1001)
*Also gets rid of the five compiler warnings out of the few hundred/thousand (when building the entire project) that warn about copying loop variables*
i.e.
```/home/neo/git/OrcaSlicer-EDIT-TEMP/src/slic3r/Utils/CalibUtils.cpp:828: note: use reference type to prevent copying
/home/neo/git/OrcaSlicer-EDIT-TEMP/src/slic3r/Utils/CalibUtils.cpp:832: warning: loop variable ‘opt’ creates a copy from type ‘const std::pair<std::__cxx11::basic_string<char>, int>’ [-Wrange-loop-construct]
832 | for (const auto opt : SuggestedConfigCalibPAPattern().int_pairs) { print_config.set_key_value(opt.first, new ConfigOptionInt(opt.second)); }
```
## Tests
Should have no functional difference. Contains optimizations, calibrations appear to still function well.
* Enable IPv6 usage in curls resolve code
Before this change OrcaSlicer would fail to resolve the IPv6 addresses
of printers when trying to interact with them via HTTP.
For context: I'm running my Klipper based printers with only IPv6
addresses being assigned to them. That works fine for
everything (including other slicers such as prusa-slic3r).
A few years ago I did debug this and figured that it came down to the
single line in the code base that this commit removes. I've since
patched every single OrcaSlicer version with this change and never
noticed a downside. It should be fine to remove the restriction.
* Add option to allow upload to SD-Cards marked as abnormal, also add better error description
+ Adds the options under the Network Settings to allow upload to abnormal SD-Card.
+ If not enabled user will now see why the upload is stuck at 10% depending on the sd_card_state (Readonly/Abnormal)
* Merging with current branch, and updateing "sd-card" to "storage"
* Generate localization and also change remaining sd_card_abnormal states to _storage_abnormal
* Fix issues from merge, and other bugfixes.
* Regenerate localization files.
* Improve Missing Storage Message, Add skip for abnormal storage in printer select dialog
/run/build/BambuStudio/src/slic3r/Utils/FileTransferUtils.hpp:65:27: error: ‘info’ was not declared in this scope
65 | BOOST_LOG_TRIVIAL(info) << std::string("symbol not found: ") + name;
| ^~~~
/run/build/BambuStudio/src/slic3r/Utils/FileTransferUtils.hpp:65:9: error: there are no arguments to ‘BOOST_LOG_TRIVIAL’ that depend on a template parameter, so a declaration of ‘BOOST_LOG_TRIVIAL’ must be available [-fpermissive]
65 | BOOST_LOG_TRIVIAL(info) << std::string("symbol not found: ") + name;
| ^~~~~~~~~~~~~~~~~
(cherry picked from commit 4c30fb7edd3a4a29db9178685ff276cff2da22f3)
